|
| 1 | Brush Less Direct Current (BLDC) Fan without Remote Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required.(1400mm, service value ≥ 6.0 CM/Min/Watt, air delivery 245 CM/Min (Minimum) |
| 2 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (25 mm) |
| 3 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. (3 x 4 sq. mm) |
| 4 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 5 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KVgrade as required. (3½ X 35 sq. mm (32mm)) |
| 6 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. (63 mm dia (OD-63 mm & ID-51 mm nominal)) |
| 7 | Supplying and Fixing of 22 W LED Batten, type 6500k luminaire coolday, 4 feet Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient suitable for surface/Pendant mouting i/c all accessories of make-Wipro/Havells/Philips/Crompton or similar approved by Engg-incharge |
| 8 | Providing,installing,testing and commioning of Slim surface mounted LED panel with premium diffuser to ensure glare free & even light distribution, Ceiling cutout ø (60-185) mm, height 14 mm for 24 W 6500K, 230 volt, directly on celling/wall,including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as equired. Make - Philips/Cromption/Syska/Havells Equivalent specification. |
| 9 | Providing,installing,testing and commioning of New generation energy saving & environmental friendly, long life, High-pressure die-cast aluminium housing Flood Light with toughened Glass cover, IP 66, 50 Watt, 6500K, 230 volt, directly on wall,including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as equired. Make - Philips/Cromption/Syska/Havells Equivalent specification. |
| 10 | Providing and Laying of one number PVC insulated and PVC sheathed / XLPE power cable aluminium conductor, XLPE Insulated, armoured power cable of 1.1 KV grade , confirming to IS : 7098 (Part-1) 1988 of following size of following size in the existing RCC/ HUME/ METAL/HDPE pipe as required.(Make Havells/KEI/Finolex) |
| 11 | Supplying and Fixing of 7.5HP openwell submersible pump, Head Range (m) - 30 m - 109 m , Discharge Range 780 L / min - 220 L / min,Voltage Band 415 V +6% - 15%, Pipe Size- 65 mm X 50 mm suitable for sump i/c all accessories of make-KSM/Havells/Crompton or similar approved by Engg-incharge. |
| 12 | Providing and Laying and fixing of 6 Sq. mm Flat Three Core PVC Insulated & PVC Sheathed Industrial Cable for Submersible pump of 1100 Volt, conforming to IS 694 of following size on wall surface as required.(Make Havells/KEI/polycab) |
| 13 | Fabrication, Supplying, installation, testing and commissioning of double door outdoor type feeder pillar, both side openable, dust and vermin proof compartmentalised powder coated made out of 1.6 mm thick GI sheet . Front area 300mm deep with 250 Amp TPN Alumunium Bus bar duly insulated with heat shrinkable PVC sleeves, base frame made with 50mm x 50mm x 6mm angle iron having 4 Nos. legs 800mm out of which 400mm grouted in CC foundation and 400mm above ground level gland plates i/c Pdg. & fixing following electrical switch gear i/c connection inter connection, locking arrangement, earthing labelling etc. as reqd.(Size of panel 800 mm X 600 mm x 350 mm) (i) 63 Amp FP MCCB 26 KA ( L&T / Havells/ C&S/ Schneider). 1 No (ii) 6-32 Amp TPN MCB ‘C’ Curve ( L&T / Havells/ C&S/ Schneider). 2 No (iii) 3 Phase, 7.5 HP, Direct Online Starter Submersible Pump Controller, SPP with automanual switch, FRLS (Fire retardant low smoke) Internal wiring, Combined V / A meter, Voltmter selector switch, Provided with Protection Degree IP 54, ON OFF indication, Conforms to IS/IEC 60947-4-1.( Cat no.IHSDOAL1*A Havells make and equivalent) Please Enable Macros to View BoQ information |