|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drain (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m,including getting out the excavated soil and disposal of surplus excavated soil as directed, within all leads & lifts complete in all kind of soils as per direction & entire satisfaction of Engineer incharge. |
| 2 | Excavation in soil in hilly area by mechanical means (Hydraulic excavator) / manual means in including cutting and trimming of side slopes a including dressing of sides and ramming of bottoms, lift upto 1.5 m,including getting out the excavated soil and disposal of surplus excavated soil as directed, within all leads & lifts complete in all kind of soils as per direction & entire satisfaction of Engineer incharge. |
| 3 | Excavation trenches of required width for pipes,cables etc including excavation for socket and dressing of sides,ramming of bottoms,depth upto 1.5 m,including getting out the excavted soil,and then returining the soil as required,in layers not exceeding 20 cm in depth,including ,consolidating each deposited layer by ramming,watering etc. and disposing of surplus excavted soil as directed ,with in all a lead of 50 m:Pipe cables etc. exceeding 80 mm dia.But not exceeding 300 mm dia complete in all kind of soils as per direction & entire satisfaction of Engineer incharge. |
| 4 | Providing and laying of boulder filling dry hand packed properly tightly as in wire crate apron bund within all leads & lifts complete as per direction & entire satisfaction of Engineer incharge. |
| 5 | Construction of hill side drain in accordance with the requirement of specifications true to lines and grades dimensions and other particulars as per drawing.Plani Concrete in M-10 grade 1:3:6 (1 Cement:3 Coarse sand:6 Coarse aggregate) provising concrete for within all leads & lifts plainreinforced concrete in open foundations complete as per drawings and technical specifications complete as per direction & entire satisfaction of Engineer incharge. |
| 6 | Supplying and stacking of brick/stone (for stone pitching)22.5 cm thick at site within all leads & lifts complete as per direction & entire satisfaction of Engineer incharge. |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form work for:-including entire carriage of materials as per drawings and technical specifications |
| 8 | Foundation footings basis of columns etc. and mass concrete complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 9 | Suspended floors roofs,landings,shelves and their supports balconies girders bressumers and cantilever complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 10 | Retaining walls,return walss,walls (an thickness) including attached pilasters,buttresses, plinth and string courses fillets,kerbs and steps etc. complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 11 | Beams, cantilever,plinth beams lintels:-sides and soffits of beams, beam haunchings cantilever, girders bressumers and lintels not exceeding 1 (one)meter in depth complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 12 | Stair cases with sloping or steeped soffits including preparing of the surface and finishing of nosing upto floor to all levels complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 13 | Columns pillars, posts and struts square rectangular or polygonal in plan complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 14 | Edges of slabs and breaks in floors and wallscomplete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 15 | Providing Mild steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge. |
| 16 | Steel work welded in built up sections/framed work,including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer using structural steel etc.as required.(In gratings,frames,guard bar,ladder,railing,brackets,gates and similar works) complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 17 | Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering-all work upto plinth level 1:5:10 (1 Cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) including curing as required at site complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge. |
| 18 | Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering-all work upto plinth level 1:5:10(1 Cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) upto haunches of S.W pipes incuding be dconcrete as per standar design: 100 mm diameter S.W pipe and curing complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge. |
| 19 | Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering of formwork for plain/reinforced concrete in retaining walls,breast walls,in 1:4:8 (1 Cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge. |
| 20 | Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering-all work upto plinth level 1:4:8 (1 Cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) and curing complete excluding the cost of centering and shuttering complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge. |
| 21 | Providing and laying in position reinforced cement concrete 1:1.5:3 (1cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) and curing complete in Foundation & plinth excluding the cost of centering, shuttering & reinforcement complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge. |
| 22 | Reinforced cement concrete work with 1:1.5:3 (1cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering,finishing and reinforcement complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-charge. |
| 23 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction,of approved size,design and shape,laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand,filling the joints with line sand etc. complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-charge. |
| 24 | Providing and laying cement concrete 1:1:2 (One cement:One sand:Two graded crushed hard stone aggregate 20 (Twenty) millimeters nominal size] mechanically mixed and vibrated and curing complete, excluding cost of form work i.e centering,shuttering,finishing and reinforcement including admixtures in reccomended proportions as per IS:-9013 to accelerate,retard setting of concrete,improve workability witout impairing strength and durability including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 25 | Foundation footing bases of columns and the like and mass concrete. |
| 26 | All work above plinth level upto floor 5 level |
| 27 | Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand) including entire carriage of materials upto all leads, lifts and heights complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 28 | Providing Tor steel reinforcement for work (TATA/Sail Make) reinforced cement concrete work including bending binding and placing in position complete up to all floor levels/all heights.(Thermomechanically treated bars of grade:-FE-500D or more) including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 29 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in Charge |
| 30 | Half Burnt brick with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in Charge |
| 31 | Providing and fixing glazing in aluminium door,window,ventilator shuttaers and partitions etc. With EPDM rubber/neoprene gasket etc.complete as per the architectural drawings and complete in all respect as per entire direction & satisfaction of Engineer incharge. |
| 32 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) |
| 33 | Providing and fixing aluminium work for doors,windows,ventilators and partitions with exruded built up standrad tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285,fixing with dash fastners of required dia and size,including necessary filling up the gaps at junctions,i.e. at top,bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth,rust free,straight,mitred and jointed mechnically wherever required including cleat angle,Aluminium snap beading for glazing/panleling,C.P. brass/stainless steel screws, For shutters of doors,windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM ribber/neoprene gasket required (fitting shall be included along with required fittings) all complete as per architectural drawings and the direction Engineer incharge. |
| 34 | Powder coated aluminium for fixed protion (minimum thickness of powder coating 50 micron) |
| 35 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 36 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minium anodic coating of grade AC 15) of approved design/pattern,with approved standard section and fixed to the existing window frame with C.P. brass/stainless steel screws @ 200 mm centre to centre,including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening,all complete as per requirement and direction of Engineer in charge (only weight of grill to be measured for payment). |
| 37 | Providing and fixing aluminium sliding door bolts,ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868),transparent or dyed to required colour or shade with nuts and screws etc.complete as per requirement and direction of Engineer in charge. |
| 38 | 300x16 mm |
| 39 | 250x16 mm |
| 40 | Providing and fixing aluminium tower bolts,ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868),transparent or dyed to required colour or shade with nuts and screws etc.complete as per requirement and direction of Engineer in charge. |
| 41 | 200x10 mm |
| 42 | 150x10 mm |
| 43 | Providing and fixing aluminium handles,ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868),transparent or dyed to required colour or shade with nuts and screws etc.complete as per requirement and direction of Engineer in charge. |
| 44 | 125 mm |
| 45 | 100 mm |
| 46 | Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion,necessary brass screws etc.to suit shutter thickness complete as per requirement and direction of Engineer in charge. |
| 47 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25 mm with two chromium plated brass brackets fixed with C.P. Brass screws and PVC sleeves tec.,wherever necessary complete:(20 mm dia) as per requirement and direction of Engineer in charge. |
| 48 | Providing and fixing bright finished brass helical door spring (superior quality) complete as per requirement and direction of Engineer in charge. |
| 49 | Providing and laying 10 mm thick anti skid heavy duty vitrified floor tiles of 600x600 mm size with water absorption less than 0.08% and conforming to IS: 15622, of Nitco/Kajaria/Orient make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. complete including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 50 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 51 | Providing and fixing18 mm thick gang saw cut,mirrioe polished,premoulded and prepolished,machine cut for kitchen platforms,vanity sounters,window sills,facias and similar locations of required size,approved shade,colour and texture laid over 20 mm thick base cement moetar 1:4(1 cement:4 coarse sand),joints treated with white cement,mixed with matching pigment,epoxy touch ups,including rubbing,curing,moulding and polishing to edge to give high gloss finish etc. (Rajnagar Plain White Marble/Udaipur green marble/Zebra Black Marble) complete at all levels complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 52 | Providing and fixing hand rail of approved size by welding etc.to steel ladder railing,balcony railing,staircase railing and similar works,including applying priming coat of approved steel primer.M.S. Tube 40 mm dia complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 53 | 15 mm thickcement plaster on rough side of single or half thick brick wall of mix:1:6 (1 cement:6 coarse sand) complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 54 | 20 mm thickcement plaster on rough side of single or half thick brick wall of mix:1:6 (1 cement:6 coarse sand) complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 55 | 20 mm thickcement plaster on rough side of single or half thick brick wall of mix:1:4 (1 cement:4 coarse sand) complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 56 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete within all leads and lifts , including all incidental charges complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 57 | Distempering with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 58 | Finishing walls with Acrylic Smooth exterior paint of required shade:-New work (Two or more coats applied @1.67ltr/10sqm over and including prime coat of exterior primer applied @2.20Kg/10sqm) including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 59 | Painting steel work with deluxe multi surface paint to give an even shade.Two or more coat applied @0.90 lts/10 sqm over an under coat of primer applied @0.80 ltr/10 sqm of approved brand and manufacture complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 60 | Providing plinth protection 50mm(fifty millimeter) thick in cement concrete 1:3:6(one cement: three sand:six graded stone aggregate 20mm(twenty millimeter) nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size ,well rammed and consolidated and grouted with fine sand,including necessary excavation,levelling & dressing and finishing the top smooth wihin all leads and lifts, including all incidental charges complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 61 | Providing and fixing RCC precast SFRC Grass Grid with 6mm steel reinforcement M-35 600x600x75 mm thick made with automatic Italian pattern double vibration technology fitting complete including entire carriage of material in all leads and lifts complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 62 | Stone Tile work for wall lining upto 10m height with special adhesive over 12 complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 63 | Providing and laying pressed clay tils (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 Cement:4 coarse sand) mixed with 2% inregral water proofing compound,laid over a bed of 20mm thick cement mortar 1:4 (1 Cement:4 coarse sand) complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 64 | Finishing walls including with textured exterior paint of required shade complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 65 | Providing and fixing glazing in aluminium door,window,ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. including the cost of aluminium snap bleading shall be included with HDMR board (both side laminated) 12mm thick and as directed by the directions of engineer in charge and as per architectural drawings. |
| 66 | Providing and fixing white vireous china pedestal type water closet (European) type W.C pan) with seat and lid,10 ltr low level white P.V.C flushing cistern,including flush pipe,with manuallly controlled device (handle lever),confirming to IS:7231,with all cutting and making good the walls and floors wherever required:W.C pan with ISI marked white solid plastic seat and lid etc in all respect as per direction & entire satisfaction of Engineer incharge. |
| 67 | Providing and fixing wash basin with C.I brackets,15mm dia CP brass single hole basin mixer of approved qulaity and make,including painting of fittings and brackets,cutting and making good the walls wherever required White viterous China Wash basin size 550*400mm with a pair of 15 mm C.P brass pillar taps of CERA,HINDWARE/PARRYWARE complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 68 | Providing and fixing white vitreous china padestal forwash basin completely recessed at the back for the reception of pipes and fittings of CERA,HINDWARE/PARRYWARE complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 69 | Providing and fixing PVC waste pipe for sink or wash basin inculding PVC waste fittinngs complete (32 mm dia.) of CERA,HINDWARE/PARRYWARE complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 70 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground ground fixed to wooden cleats with CP brass screws and washers complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 71 | Providing and fixing PTMT CP brass towel rail of Jaquar /JAL/ Seiko/ approved make complete with brackets fixed to wooden cleats with cP brass screws with concealed fittings arrangement of approved quality and colour complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 72 | Providing and fixing 600x120x5 mm glass shelf with edges round off,supported on anodised aluminium angle frame with CP brass brackets and guard rail complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 73 | Providing and fixing Cromium Plated soap dish (ACN 1131N) of Jaquar /JAL/ Seiko/ approved make with CP brass bracket fixed to wooden cleat with CP brass screw complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 74 | Providing and fixing CP brass bib cock of Jaquar /JAL/ Seiko/ approved make conforming to IS :8931 of series CON 107 KN:15 mm nominal bore short body complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 75 | Providing and fixing CP brass bib cock of Jaquar /JAL/ Seiko/ approved make conforming to IS :8931 of series CON 107 KN:15 mm nominal bore long body complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 76 | Providing and fixing single liver sink mixer swinging spout (wall mounted model) of series (FUS 29163) of Jaquar /JAL/ Seiko/ approved make with connecting legs & wall flanges of Cera/Perry ware make or its equiblent complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 77 | Providing and fixing stop cock (concealed) of Jaquar /JAL/ Seiko/ approved make of standrad design and of approved make conforming to IS:8931 complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 78 | Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per IS:13983 with CI brackets and stainless steel plug 40 mm,including painting of fittings and brackets,cutting and making good the walss wherever required :Kitchen sink with drain board 510x1040 mm bowl depth 250 complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 79 | Providing and fixing unplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 80 | Providing and fixing ball valve (brass) of approved quality,high or low pressure,with plastic floats complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 81 | 15 mm nominal size |
| 82 | Providing and fixing ball valve (brass) of approved quality, high or low pressure,with plastic floats complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 83 | 15 mm nominal size |
| 84 | 20mm nominal size |
| 85 | Providing and fixing Cromium Plated Grating of approved quality and colour complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 86 | Providing and fixing 8 mm dia CP/SS jet of Jaquar /JAL/ Seiko/ approved make with flexible tube upto 1 m long with SS triangular plate to Eureopean type WC of quality and make complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 87 | Providing weep holes in brick masonary/stone masonary/plain reinforced concrete abutment,wing wall, return walls with 100 mm dia PVC pipe extending through the full with of the structures with slope of 1(v):20 (H) towards drawing face complete as per drawings and technical specifications complete in all respect within all leads and lifts as per direction & entire satisfaction of Engineer incharge. |
| 88 | Constructing brick masonry manhole in cement mortar 1:4 (1 cement:4 coarse sand) with RCC top slab with 1:1.5:3 mix( 1cement:1.5 coarse sand (zone-III):3 graded stone stone aggregate 20 mm nominal size),foundation concrete 1:4:8 mix (1 cement:4 coarse coarse sand(zone-III): 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement:3 course sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design: |
| 89 | Inside size 90x80 cm and 45 cm deep including CI cover with frame (light duty) 455x610 mm internal dimensions,total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) 15 mm dia with common burnt clay FPS (non modular) bricks of class designation 7.5 complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 90 | Inside size 120x90 cm and 90 cm deep including CI cover with frame (medium duty) 500 mm internal dimensions,total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58kg) 15 mm dia with common burnt clay FPS (non modular) bricks of class designation 7.5 complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 91 | Providing MS foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement:3 coarse sand:6 graded stone agreegate 20 mm niminal size ) as per standarad design with 20x20 mm square bar complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 92 | Supplying and fixing CI cover with frame for manholes:455x600 mm rectangular CI cover (light duty) the weight of the cover to be not less than 23 kg complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 93 | Providing and fixing soil,waste and vent pipes 75 mm dia meter centrifugally cast (spun) iron socked pipe as per IS:3989 complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 94 | Providing and fixing soil,waste and vent pipes 100 mm dia meter centrifugally cast (spun) iron socked pipe as per IS:3989 complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 95 | Providing and fixing bend of required degree with access dorr,insertion rubber washer 3 mm thick,bolts and nuts complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 96 | 100 mm sand cast iron S&S as per IS-3989 |
| 97 | 75 mm sand cast iron S&S as per IS-3989 |
| 98 | Providing and fixing single equal plain junction of required degree with access door,insertion rubber washer 3 mm thick,bolts complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 99 | 100x100x100 mm sand cast iron S&S as per IS-3989 |
| 100 | Providing and fixing double equal plain junction of required degree complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 101 | 100x100x100 mm sand cast iron S&S as per IS-3989 |
| 102 | Providing and fixing trap of self cleansing design with screwed down or higed grating with or without vent arm complete,including cost of cutting and making good the walls and floors :100 mm inlet and 75 mm outlet sand cast iron S&S as per IS:3989 complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 103 | Providing and fixing collar of variour dia complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 104 | 100 mm Sand cast iron S&S as per IS-3989 |
| 105 | 75 mm Sand cast iron S&S as per IS-3989 |
| 106 | Providing and fixing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of dameter complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 107 | 100 mm |
| 108 | 75 mm |
| 109 | Providing and fixing G.I. Pipes complete with G.I. Fittings and clamps,i/c making good the walls etc. concealed pipe,including painting with anti corrosive bitumastic paint,cutting chases and making good the wall complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 110 | 15 mm dia nominal bore |
| 111 | 20 mm dia nominal bore |
| 112 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank of sintax / vectus make IS 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 113 | Providing and fixing on wall face unplasticised rigid PVC rain water pipe conforming to IS: 13592 Type A,including jointing with seal ring conforming to IS:5382,leaving 10 mm gap for thermal expansion (i) single socketed pipes.110 mm dia complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 114 | Providing and fixing M.S. Stays and clamps for cast iron/centrifugally cast (spun) iron pipes of diameter complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 115 | 100 mm |
| 116 | 75 mm |
| 117 | Constructing brick masonary manhole in cement mortar 1:4 (1Cement:4 Coarse sand) with R.C.C top slab with 1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone aggregate 20 mm nominal size),foundation concrete 1:4:8 (1 cement:4 coarse sand:8 graded stone aggregate 40 mm nominal size),1:3 (1 Cement:3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 Cement:2 Coarse sand:4 graded coarse aggregate 20 mm nominal size) finished with floating coat of neat complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 118 | Inside size 90*80mm and 45 cm deep including C.I cover with frame (light duty) 455*610mm internal dimensions,total weight of cover and frame to be not less than 38Kg (weight of cover 23Kg and weight of frame 15Kg) with common burny clay F.P.S (non modular) bricks of class designation 7.5 complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 119 | Making soak pit 2.5m diameter 3.0 metre deep with 45*45cm dry brick honey comb shaft with bricks and S.W drain pipe 100 mm diameter,1.8 m long compete as per standar design with common burnt clay F.P.S (non-modular) brick of class designation 7.5 complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 120 | Wiring for light point/fan point/exhaust fan point/call bell point with 1.5sq.mm FRLS PVC insulated copper conducter single core cable in surface/recessed meduim class PVC Consuit,with modular switch,modular plate,suitable G.I box and earthing the poiunt with 1.5sq mm. HRLRLS-LR PVC insulated copper conductor single core cables etc. as required (polycab,havells make) complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 121 | Group A |
| 122 | Group B |
| 123 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm HRFRLS-LF PVC insulated copper conductor single core cable etc. as required (Polycab,havells make or as approved by site engineer) complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 124 | Group C. |
| 125 | Supplying and fixing two module stepped type fan regulator on the existing modular plate switch box including connections etc. as required. (Legrand, Havells,make or as approved by site engineer complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 126 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. complete in all respect as per direction & entire satisfaction of Engineer incharge. |
| 127 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 128 | Supplying and drawing following sizes of HRFRLS-LF PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 129 | 1 x 1.5 sq. mm |
| 130 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed mediumclass PVC conduit as required (Polycab,havells make or as approved by site engineer) |
| 131 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 132 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 133 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 134 | 2 X 10 sq. mm + 1 X 6 sq. mm earth wire |
| 135 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed mediumclass PVC conduit as required (Polycab,havells make or as approved by site engineer) |
| 136 | 4 X 6 sq. mm + 2 X 6 sq. mm earth wire |
| 137 | 4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 138 | Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 139 | 25 mm dia. ISI marked, PVC conduit |
| 140 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete withconnections, testing and commissioning etc. as required (Legrand,havells make or as approved by site engineer) |
| 141 | Single pole |
| 142 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (Legrand,havells make or as approved by site engineer) |
| 143 | Double door-6 way |
| 144 | Double door-8 way |
| 145 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V,on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (Legrand,havells make or as approved by site engineer) |
| 146 | Double door-6 way (4+18),horizontal type |
| 147 | Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required (Bajaj,Havells make or as approved by site engineer) |
| 148 | Earthing with COPPER earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 149 | Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate includingholes etc. complete as required. |
| 150 | Providing and fixingG.I.. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) |
| 151 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) |
| 152 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. |
| 153 | Providing and fixing 4.00 mm dia copper wire on surface or recess for loop earthing as required. |
| 154 | Providing, installing, testing and commissioning of ceiling fan and regulator, including wiring, the down road of standard length (upto 30 Cm.) with 1.5 Sq.mm. PVC insulated copper conductor single core cable etc (Usha,Bajaj,Havells make or as approved by site engineer) |
| 155 | Ceiling Fan 1200 mm sweep, category-A |
| 156 | Ceiling Fan 1400 mm sweep, category-A |
| 157 | Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc (Usha,Bajaj,Havells make or as approved by site engineer) |
| 158 | Exhaust Fan, Light duty, 300 mm sweep |
| 159 | Providing and installation of stationary storage type Electric water heater Andris Slim 30 ltrs Geyser Racold Make (Geyser) by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18\\" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc.(Racold,Bajaj,Havells make or as approved by site engineer) havells monja DX |
| 160 | 35 Liter capacity water heater (Cat-A) |
| 161 | Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:- (Polycab,Havells or ISI make as approved by site incharge) |
| 162 | Armoured cable 6sq. mm (2 core) |
| 163 | Armoured cable 10 sq. mm (4core) |
| 164 | Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering:- (Polycab, Havells or ISI make as approved by site incharge) |
| 165 | Armoured cable 6sq. mm (2 core) |
| 166 | Providing and fixing of Oriel Next Wall light Model No. 34141 Giraffe Dim, colour Brushed Nickel for metal and Milky White for diffuser, Philips make with integrated LED 15Watt Warm White colour complete with all accessories including connections, testing and commissioning as required. (Wipro/Jaquar/Bajaj or equivalent or as approved by the site engineer) |
| 167 | Providing and fixing following type ofsurface fixture Functional Downlight White, 15watts warm white colour, complete with all accessories, connections, testing and commissioning etc. as required. (Jaquar/Bajaj/Wipro make or as approved by site engineer) |
| 168 | Providing and fixing following type of surface fixture essentail smart batten Philips make cat no. BN170CLED40S4000K PSU L120 (1x4fts), 40Watts complete with all accessories, connections, testing and commissioning etc. as required.(Jaquar/Bajaj/Wipro make or as approved by site engineer) |
| 169 | Providing and fixing of Mirror Light 31165 Philips make complete with all accessories including connections, testing and commissioning as required. (Jaquar/Bajaj/Wipro make or as approved by site engineer) |
| 170 | Supply, Installation, testing and commissioning of 63 AMP three phase Bus Bar Chamber Havells make Cat No. IHBC006308 with Legrand make Cat No. 027029 ,63 Amp FP, MCCB having space for incoming/outgoing cables, wall mounting type, front operated all complete with interconnections and painted with powder coated as per direction and approval of the site engineer including all leads and lifts. |
| 171 | Supply, Installation, testing and commissioning three phase Bus-Bar chamber with specific MCCB and space for incoming/outgoing cables, wall mounting type, front operated all complete with interconnections and painted with powder coated as per direction and approval of the site engineer including all leads and lifts. |
| 172 | 100 AMP three phase Bus Bar Chamber Havells make Cat No. IHBC010008 having with Legrand make Cat No. 027018 ,100 Amp FP, MCCB |
| 173 | Supplying and fixing of Boundary wall Light Havells LEXO (PRISMATIC) Cat No. LHFOGAE1T11F0, high grade unbreakable polycarbonate material suitable for 20 W LED lamp B22 base. including 0.30 mtr. 40mm G.I.pipe for fixing, containing one no. 2way MCB DB ,6 Amp. MCB,painting complete with all accessories including 5W LED lamp including making connections, testing etc. as required or as approved by site incharge (Philips/Bajaj/Wipro make or as approved by site engineer) |
| 174 | Design as per technical specification and drawings manufacture LT Panel of Consul-RR Ispat make, insure, pack, transport to site, store and erect in proper position , testing and commissioning of cubicle pattern panel fabricated using 14 gauge CRCA MS Sheet steels/16 gauge CRCA for partition and vertical separations, Dust and vermin proof lockable doors, Single Compressions brass glands for Incoming/outgoing cables. All the Distribution panels shall be floor or wall Mounting type, having top/ bottom cable entry , front operated all complete with interconnections by tinned copper Bus Bars Color-coded heat shrinkable PVC sleeves and painted with powder coated process only with Egg shell white colored from inside and light gray from outside as per shade 631 of IS-5 and as per final direction. (L&T, Havells or as approved by the Engineer Incharge) |
| 175 | Incoming |
| 176 | 1 Nos.200A, FP, 25 kA, MCCB with Microprocessor based release having adjustable over load and adjustable short circuit, auxiliary contact, Rotary handel, spreader link, etc. |
| 177 | Bus bar |
| 178 | 1 set of300 Amps, 415 volts, 3 phase, 4 wire colour coded copper TPN bus bar, after taking all derating factors. |
| 179 | Outgoings |
| 180 | 2 No. 100 A, FP, 25 kA, MCCB with thermal magnetic release and spreader terminals. |
| 181 | 2No. 63 A, FP, 25 kA, MCCB with thermal magnetic release and spreader terminals. |
| 182 | 2 No. MCB TPN 63 Amp. |
| 183 | 2 No. MCB DP 63 Amp. |
| 184 | Instruments |
| 185 | 1 Nos. 0-250 Volts, 96 sq.mm digital voltmeter with protection fuses and selector switch. |
| 186 | 1 Nos. 0-150 Amps, 96 sq.mm digital ammeter with 150/5A CT's and selector switch. |
| 187 | 1 Set R Y B phase indicating lamps with protection fuses. |
| 188 | 1 Lot of control wiring. |
| 189 | 1 Set of designation plates. Please Enable Macros to View BoQ information |
