|
| 1 | Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge. as per entire satisfaction and direction of Engineer-in- charge including carriage of materials within all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but execulding GST. |
| 2 | Earth work in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50m dressing of sides and bottom and backfilling in trenches with excavated suitable matreial. as per entire satisfaction and direction of Engineer-in- charge including carriage of materials within all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but execulding GST. |
| 3 | Providing and laying in position cement concrete of 1:4:8 (one cement; four coarse sand : eight graded /crushed stone aggregate 40mm (forty millimeters) (nominal size) excluding the cost of centering and shuttering:-all works up to plinth level including curing complete as per approved drawing, design , specifications and as per directions and entire satisfaction of Engineer in charge including carriage of materials within all leads , lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but execulding GST. |
| 4 | Providing and laying in position machine batched and machine mixed cement concrete work of grade M-20 (M-Twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty newton per square millimeter) for reinforced cement concrete work, using cement contents not less than @ 330 kg/cum (at the rate Three hundred thirty kilogram per cubic metre) or as per approved design mix. All works upto plinth level to give a smooth surfaces mechanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera as per specifications, approved drawing, design and as directed by the Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but execulding GST. |
| 5 | Providing and laying Steel reinforcement of Thermo-Mechanically Treated bars of grade Fe-500D or more of TATA/ SAIL/ SHYAM Steel/ RINL make for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level as per directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but execulding GST. |
| 6 | Boulder filling tightly hand packed with hard stone under floor complete as directed by the Engineer-in Charge including carriage of materials within all leads and lifts and other incidental charges. The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but execulding GST. |
| 7 | Supplying and filling in plinth with sand under floor including watering, ramming,consolidating and dressing complete as per HP.P.W.D. Specifications or as per direction and entire satisfaction of the Engineer-in -charge including carriage of materials within all leads , lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but execulding GST. |
| 8 | Half brick masonry with common burnt clay F.P.S. (non modular ) bricks of class designation 7.5 (seven decimal five ) in super- structure above plinth level up to all floor level with cement mortar 1:4 (One Cement is to four coarse sand ) and curing complete as per approved drawings, design, specifications or as per direction and entire satisfaction of Engineer –in- charge including carriage of materials within all leads, lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but execulding GST. |
| 9 | Brick work with common burnt clay F.P.S. (non modular ) bricks of class designation 7.5 (seven decimal five) in super-structure above plinth level up to all floor level in cement mortar 1:6 (one cement is to six coarse sand) and curing complete as per approved drawing, design or specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but execulding GST. |
| 10 | Providing and applying 15mm (Fifteen millimeters) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on rough side of brick/concrete/stone walls for interior plastering including making groove or drip course, arises, internal rounded angles, chamfers and or rounded angles in all girth and finished even and smooth and curing complete up to all floor level as per approved drawing, specifications as per the direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but execulding GST. |
| 11 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer (Asian/Nerolac/ICI-Dulux/Berger) of required shade and colour complete, as per manufacturer’s specification with Two or more coats on new work as per direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design. The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but execulding GST. |
| 12 | Providing and Fixing 2mm (two millimeters) thick PVC (Polyvinyl chloride) plain paneling on wall with necessary screws complete or with approved adhesive complete as per netire satisfaction and directions of Engineer in charge complete including carriage of matreials with in all leads and lifts and other incidental.as per direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design. The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but execulding GST. |
| 13 | Providing and Fixing 2mm (two millimeters) thick PVC (Polyvinyl chloride) plain paneling on ceiling with necessary screws complete or with approved adhesive complete as per netire satisfaction and directions of Engineer in charge complete including carriage of matreials with in all leads and lifts and other incidental.as per direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design. The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but execulding GST. Please Enable Macros to View BoQ information |
