Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Section- I Civil WorksKitchen and Dining Hall |
| 2 | 5.1.1Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I. |
| 3 | 5.1.2Extra for earth work in hard soil as per specification and direction of E/I.( vide classification of soil item B) |
| 4 | 5.1.8Filling in foundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. |
| 5 | 5.1.10Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 6 | 5.6.1Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 7 | 5.3.1Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :5.3.1.41:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) |
| 8 | 5.2.3Providing designation 75A brick work in C.M (1: 6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I. |
| 9 | 5.3.5Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size). |
| 10 | 5.3.9Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level.5.3.9.11:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)IN FOUNDATION |
| 11 | 5.3.17Centering and shuttering including strutting, propping etc. and removal of form for5.3.17.1Centering and shuttering including strutting, propping etc. and removal of form for |
| 12 | 5.3.10Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) |
| 13 | 5.3.17Centering and shuttering including strutting, propping etc. and removal of form for5.3.17.6Columns, Pillars, Piers, Abutments, Posts and Struts |
| 14 | 5.3.11Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 15 | 5.3.17Centering and shuttering including strutting, propping etc. and removal of form for5.3.17.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 16 | 5.3.11Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 17 | 5.3.17Centering and shuttering including strutting, propping etc. and removal of form for5.3.17.4Shelves (Cast in situ) |
| 18 | 5.3.17Centering and shuttering including strutting, propping etc. and removal of form for5.3.17.3Suspended floors, roofs, landings, balconies and access platform |
| 19 | 5.2.14Providing designation 75 B brick work in C.M. (1: 6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 20 | 5.2.52Providing designation 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9\\"x4.5\\"x3\\") in CM (1:6) in super structure with approved quality of Clean coarse sand of F.M 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening materials raking our joints to 15 mm depth curing, taxes and royalty all complete as per building specification and direction of E/I |
| 21 | 5.3.11Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 22 | 5.3.17Centering and shuttering including strutting, propping etc. and removal of form for5.3.17.15Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like |
| 23 | 5.7.3Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I |
| 24 | 5.5.1Providing reinforcement (Round Bar confirming to IS 432 dia in mm (IS 2062 Gbr A) of 6 &8 mm dia rods as per approved design and drawing excluding carriage of bars to work site, cutting , bending and binding with annealed wire with cost of wire removed of rust placing the rods in position all complete as per building specification and direction of E/I. 6 mm dia - |
| 25 | 5.5.4Providing Tor steel reinforcement of 8mm. dia. rods as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. TMT Fe 500 ( Only valid for SAIL / TATA steel ) |
| 26 | 5.5.5Providing Tor steel reinforcement of 10mm. ,12mm & 16mm dia. bars as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. |
| 27 | (a) 10mm (Only valid for SAIL,TATA steel , JSPL, Electrosteel Ltd and Vizal Steel) |
| 28 | (b) 12mm (Only valid for SAIL,TATA steel , JSPL, Electrosteel Ltd and Vizal Steel) |
| 29 | (c) 16mm (Only valid for SAIL,TATA steel , JSPL, Electrosteel Ltd and Vizal Steel) |
| 30 | 5.5.13Providing and fixing fan hook of 16mm dia M.S. bar 1 metre long bent to required size and shape, placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I. (where material is not supplied by the deppt.) |
| 31 | DSR 13.80Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 32 | DSR 13.45Finishing walls with textured exterior paint of required shade :13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 33 | 5.8.21Providing two coats of Plastic emulsion paint of approved make & shade over a coat of cement primer over new surface including preparing the plastered surface by rubbing, smooth with pumic stone or fine sand paper, aplying putty wherever required, scaffolding , washing of flores and taxes etc. all complete as per building specification direction of E/I. |
| 34 | 5.5.12Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flats as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, hoisting carriage of grill to work site, hoisting as per building specification and direction of E/I. |
| 35 | DSR 12.41.2 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 12.41.2 110 mm diameter |
| 36 | DSR 4.17Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. |
| 37 | 5.10.33Providing 250 mm wide brick drain in cement mortar (1: 6) with av. 150 mm. clean depth and 250 mm apron including cost of earthwork involved with 75 mm, cement concrete (1: 4: 3) over one brick designation 75A, flat soling in proper grade and slope at the base, the drain duly plastered in C.M (1:3) with punning over exposed surface all complete as per building specification and direction of E/I. |
| 38 | DSR 11.41Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.11.41.3 Size of Tile 800x800 mm |
| 39 | DSR 11.40Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete. |
| 40 | DSR 8.31Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 41 | DSR 8.2.2.2Providing and fixing 18mm thick mirror polished, machine cut for kitchen platforms, vanity counters facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 Cement : 4 coarse sand) with joints treated with white cement ,mixed with matching pigment, epoxy touch ups, including rubbing ,curing etc. complete at all levels. GRANITE OF ANY COLOUR AND SHADE -Area of slab Over 0.5 sqm . |
| 42 | DSR 8.3Providing edge moulding to 18 mm thick marble stone counters, Vanitiesetc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.8.3.2 Granite work |
| 43 | DSR 9.147AProviding and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. |
| 44 | After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod pf approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. |
| 45 | Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS:16231 shall be paid separately. |
| 46 | Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for: |
| 47 | (i) Sites with basic wind speed > 45 m/sec as per IS 875 - Part 3 |
| 48 | (ii) Sites with structure height more than 20m for all wind speeds. |
| 49 | 9.147.A4Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. |
| 50 | 9.147.A4.1Using R2 series with frame (70mm & above) x (40mm & above) & both glazed and fly screen sash (25mm & above) x (50mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 meter). |
| 51 | DSR 10.14Providing and fixing pressed steel door frames conforming to IS: 4351 manufactured from commercial mild steel of 1.60mm thickness including hings, jamb, bead and if required angle threshold of mild steel angle od section 50x25mm or base ties of 1.60mm pressed mild steel welded or rigidly togather by mechnical means including M.S pressed butt hiongs 2.5mm thick with mortar guards, lock strike plate and shock absorbers as specified and applying of the surface as directed ny Engineer in - charge. |
| 52 | DSR 10.14.2.2Fixing with carbon steel galvanised dach fastener of required dia and size (to be paid for separately) |
| 53 | DSR/12.4Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I.limpet and bitumen washers complete.12.4.1 0.80 mm thick with zinc coating not less than 275 gm/m² |
| 54 | DSR 9.20Providing and fixing ISI marked flush door shutters conforming to IS:2202 (part 1) decorative type core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with verticcal grains or cross bands and face veneers on both faces of sutters. |
| 55 | DSR 9.20.230mm thick including ISI marked stainless steel butt hinges with necessary screws |
| 56 | D.S.R. 10.16Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 57 | 10.16.1Hot finished welded type tubes. |
| 58 | DSR/26.86 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (woodpowder/ rice husk/wheat husk) and non toxic additives (maximumtoxicity index of 12 for 100 gms) fabricated with miter joints afterapplying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). |
| 59 | 26.86.1 Frame size 45 x 70 mm |
| 60 | DSR/26.87 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 61 | 26.87.1 30 mm thick |
| 62 | DSR/12.52Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. |
| 63 | DSR/12.52.412.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79,with 50 mm resin bonded glass wool backing. |
| 64 | DSR/12.1 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces),excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.DSR/12.1.1 1.00 mm thick with zinc coating not less than 275 gm/m² |
| 65 | Carriage of materials by truck or by any mechenical means loading,unloading & stacking etc. all complete job as per direction of E/I. |
| 66 | Bricks (1k+14p)= 15 km |
| 67 | Coarse Sand (15 KM.) |
| 68 | Stone Chips (20) km |
| 69 | Cement (15 KM.) |
| 70 | Steel (15 KM.) |
| 71 | Earth (3 KM.) |
| 72 | Water supply and sanitary installation work |
| 73 | 3.2.1Supplying fiting and fixing vitreous white Glazed earthen ware I.W.C of party Hindustan or any other I.S.S equivalent make complete with all fittings, C.I or C.C brackets 32 mm alkathene/P.V.C telescopic flush pipe anout 2m long with one bragg couping and clamps G.I chain and pull including supplying and fixing a pair of vitreous whotr glazed earthen ware ware footrest to be fixed in floor 15mm C.I body brass spindle stope cock weight not less then 50 grms. 15mm P.V.C conection pipe 150 mm long and exposed pipe and cistern with two coates of apporoved paint over a coat of red oxide etc. all complete as per specification and direction of E/I(A) 580 mm long (C) with 12.5 lit. low level PVC cistern. |
| 74 | DSR 18.49Providing and fixing C.P. brass bib cock of approved quality conforming to IS 893118.49.1 15 mm nominal bore |
| 75 | DSR 18.51.1Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690gms.15 mm nominal bore |
| 76 | DSR 18.65Providing and fixing PTMT Soap Dish Holder having length of 138 mm breadth 102 mm, height of 75mm with concealed fitting arrangements, Weighing not less then 106 gms. |
| 77 | DSR 18.53.1Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 15mm nominal bore, approved brand C.P. fittings. |
| 78 | DSR 18.75.1Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.15 mm nominal bore, weighing not less than 32 gms |
| 79 | DSR 18.17Providing and fixing gun metal gate valve with C.I wheel of approved quality (screwed end) |
| 80 | DSR 18.17.125mm nominal bore |
| 81 | DSR 18.17.232mm nominal bore |
| 82 | DSR 17.32.2Providing and fixing Mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing.Rectangular shape 453 x 357 mm |
| 83 | DSR 17.7.1Providing & fixing wash basin with C.I brackets,15mm C.P brass taps, 32 mm C.P brass waste of standard pattern including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 84 | DSR 18.58.1.2Providing and fixing PTMT grating of approved quality and colour. 125 mm nominal dia with 25 mm waste hole |
| 85 | DSR 18.74.2Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length |
| 86 | DSR 17.28.2.1Providing And fixing 32 mm waste pipe for sink or wash basin including P.V.C. waste fittings complete.32 mm dia |
| 87 | DSR 12.41Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 10 mm diameter |
| 88 | DSR 12.42Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion. |
| 89 | DSR/12.42.3Single tee with door 12.42.3.2 110mm |
| 90 | DSR/12.42.4Single tee without door 12.42.4.2 110x110x110 mm |
| 91 | DSR/12.42.5Bend 87.5° 12.42.5.2 110mm |
| 92 | DSR/12.42.5Bend 87.5° 12.42.5.2 110mm |
| 93 | DSR/12.42.6Shoe (Plain) 12.42.6.2110 mm Shoe |
| 94 | DSR 18.8Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. (Approved Brand - ASTRAL) Concealed work including cutting chases and making good the wall etc.. |
| 95 | DSR 18.8.2 20 mm nominal outer dia pipes |
| 96 | DSR 18.9Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External work. |
| 97 | 18.9.325mm dia nominal outer dia pipes |
| 98 | 18.9.432 mm dia. |
| 99 | DSR 18.48Providing and placing on terrace (at all floo levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and marking necessary holes for inlet outlet and overflow pipes but without fittings and the base support for tank. |
| 100 | DSR/19.30Supllying and matarials with lobour for construction inspection chamber of designation class 75b brick deep 600x450 internal diamention having 250mm wall thickness in cement morter(1:6)including 12mm cement plaster (1:4)with punning on inside and cement plaster (1:6)with 600x450mm G.I. cover with frame (weight not less than 36k.g)in foundation and refilling all complete as per specification and direction of E/I. |
| 101 | DSR 17.11.2Providning and fixing stainless steel A ISI 304(18/8) kitchen sink as per I.S.13983 with C.I Brackets stainless steel plug 40 mm incuding painting of fittings and brackets cutting and making goods the walls wherever requiered : 600 x 450 x200mm |
| 102 | 200 X 150 MM dia Deep bore well with pump set & electrification etc works |
| 103 | WD & SD Basic rate item no. 119 M 1035 Suppling all materisls labour and tools and cost of drilling 200mm x 165mm bore well in all kinds of soil and rock in rural area for installation of pump set with hydrolic DTH rig machine, all complete including suplying all materials tools, drilling rig, Air compressor and equipments, as well as fuel, lubricants and cost of transprtation of Rig machine and other vehicles up to the site. |
| 104 | From 0.0M to 50.0 M belew G.L |
| 105 | From 51.0 M to150.00 M belew G.L |
| 106 | DW& SD Basic rate item no. 120 M 1036supplying all tools, tackles & lowering of 200 mm dia MS ERW casing pipe of 6mm wall thickness including welding charges, cost of pipe itc including all taxes, VAT, Excise duty, freight charges with inspection charges etc as applicable, etc all complete job. |
| 107 | DW& SD Basic rate item no. 126 M 1042Cleaning Flushing and devloping of drilled hole for testing the discharge of water development of bore well by continueous flow of water bu using heavy compresser upto satisfaction of E/I. To get uniterrupted flow of water free from sand and soil etc. |
| 108 | DW& SD Basic rate item no. 120 M 1036Supplying and fitting M.S cap over 200mm dia casing pipe as per direction of E/I . |
| 109 | WD & SD Basic rate item no. 139 M 1055Supplying 100 mm dia submersible pump sets confirming to IS 8034 and motor confirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. Motor suitable for working on 415V + 10%, 3PH, 50 Hz, A.C. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump. |
| 110 | Submersible Pump 150 mm dia ( with Bronze impeller) up to 8 stages2.0 HP |
| 111 | WD & SD Basic rate item no. 149 M 1065Supplying Fully Automatic Starter to operate induction motor working on 415v, 3 phase ,50 hz with no volt coil , Over load element , ON-OFF push buttons with necessary materials and connected to supply etc complete starter with original sheet steel encloser as per IS: 3914.F.A.S.D. Starter |
| 112 | WD & SD Basic rate item no.146 M1062Supplying 3 core flat flexible submersible cable with, copper conductor, PVC insulated and PVC sheathed as per IS : 70983 Core 4mm thick |
| 113 | Rate Analiysed and Approved2no heavy duty clamp 40mm dia duitable for pipe with all complet job. |
| 114 | WD & SD Basic rate item no. 14(K) (v)Supplying & lowering 40mm da column G. I. pipe with all complete job. |
| 115 | Septic tank & Soak pit |
| 116 | 5.1.1Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/I. |
| 117 | 5.1.2Extra for earthwork in hard soil as per specification and direction of E/I. (Vide classification of soil item) |
| 118 | 5.1.10 Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume). |
| 119 | 5.6.1 Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 120 | 5.3.1Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :5.3.1.31:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size) |
| 121 | 5.3.11Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 122 | 5.2.23 Providing designation 125 mm thick reinforced designation 75A brick work in CM (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, carriage of materials, scaffolding, raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I. |
| 123 | 5.3.20Providing, hoisting and fixing above plinth level up to floor five level precast Reinforced cement concrete in shelves, including setting in cement mortar 1:3 (1cement : 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 124 | 5.2.2 Providing designation 75A brick work in C.M (1 : 4) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth, curring, taxes and royalty all complete as per builiding specification and direction of E/I. |
| 125 | 5.7.1 Providing 12mm thick cement plaster (1:3) with clean coarse sand of F.M. 1.5 and including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I |
| 126 | 5.7.11 Providing 1.5 mm thick cement punning including curing, carriage of water with all leads and lifts of water as per building specification and direction of E/I. |
| 127 | Basic Rate of SOR 2021 M-198 (page no 44)Providing and laying brick bats in soakpit with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I. |
| 128 | Basic Rate of DW & SD SL NO 31(b) M 947Supplying, fitting and fixing C.I. cover with frame for mane hole and inspection chamber with all leads and lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of E/I. (a) Size 600 x 450 mm (Wt. 25 Kg). |
| 129 | (a) Size 600 x 450 mm (Wt. 25 Kg) |
| 130 | 5.5.4 Providing Tor steel reinforcement of 8 mm dia rods as per approved design and drawing excluding carriage of bars to work site cutting bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per builing specification and direction of E/I. |
| 131 | 8 mm dia (Onaly valid for SAIL, TATA Stee, JSPL, Electro Steel Ltd and Vizal Steel) |
| 132 | 10 mm dia (Onaly valid for SAIL, TATA Stee, JSPL, Electro Steel Ltd and Vizal Steel) |
| 133 | Carriage of materials by truck or by any mechenical means loading,unloading & stacking etc. all complete job as per direction of E/I. |
| 134 | Bricks (1k+14p)= 15 km |
| 135 | Coarse Sand (15 KM.) |
| 136 | Stone Chips (20) km |
| 137 | Cement (15 KM.) |
| 138 | Steel (15 KM.) |
| 139 | Electrification Work |
| 140 | 1.3 Point wiring in PVC conduit, with modular type switch:-Wiring for light point/fan point/exhaust fan point/call bell point with 1.5. sq.mm FR PVC Insuleted copper conductor single core cable in recessed PVC conduit, with modular type switch, pheonlic lamineted sheet,suitable size G.I.box etc. |
| 141 | 1.3.3Group C |
| 142 | 1.5 Power plug wiring in PVC conduit (2x4 sq mm) :- Wiring for light/Power plug with 2x4 sq mm FR PVC insuleted copper conductor single core cable in recess PVC conduit along with 1 Nos. 4 sq mm FR PVC insuleted copper conductor single core cable for loop earthing as required. |
| 143 | 1.7 Circuit/submain wiring in PVC conduit:-Wiring for circuit/submain wiring along with earth wire with the following size PVC insuleted copper conductor single core cable in recessed PVC conduit as required |
| 144 | 1.7.12x1.5 sq mm+ 1x1.5 sq mm earth wire |
| 145 | 1.7.22x2.5sq mm + 1x2.5 sq mm earth wire |
| 146 | 1.7.42x6 sq mm + 1x6 sq mm earth wire |
| 147 | 1.7.52x10sq mm + 1x10 sq mm earth wire |
| 148 | 1.7.104x6 sq mm 2x6 sq mm earth wire |
| 149 | 1.24 S/F modular type switch /socket :- Supplying and fixing following modular type switch box/cover including connections but excluding modular plate etc as required |
| 150 | 1.24.15/6 amps, one way switch |
| 151 | 1.24.45/6amps,3pin socket outlet |
| 152 | 1.24.7Teliphone socket with shutter outlet |
| 153 | 1.25S/F Modular type electronic fan regulator:- supplying and fixing stepped type fan regulator on the existing modular plate switch box including connection but excluding modular plate etc, as required. |
| 154 | 1.27S/F Modular boxes bases & cover plate:- following size/ modular G.I box along with modular base & cover plate for modular switches in recess etc,as required. |
| 155 | 1.27.11 or 2 module (78mm x78mmx45mm) |
| 156 | 1.31S/F light plug point with modular type accessories:- supplying and fixing suitable size G.I box with modular plate and cover in front on recess including providing and fixinng 3 pin 5/6 amps modular socket outlet and 5/6 amps modular type swtich painting etc as required. |
| 157 | 1.32S/F power plug point with modular type accessories:- supplying and fixing suitable size G.I box with modular plate and cover in front on recess including providing and fixing 6 pin 15/16 amops modular socket outlet and 15/16 amps modular switch |
| 158 | 1.33 S/F ceiling rose:-Supplying and fixing 2 pin 5 amp, ceiling rose on the existing junction box/wooden block including connection etc as required. |
| 159 | 1.41 ITC fluorescent/led fitting directly on surface:-Instaliation, testing and commissioning of prewired, fluorescent fitting of all types, complete with all accessosries and tube etc. directly on ceiling /wall including connection with 1.5 sq mm.FR PVC insulated, copper conductor. |
| 160 | 1.44 ITC ceiling/wall fan:-Instaliation, testing and commissioning of ceiling fan including wiring the down rod of standard length( uptwo 30 cm) with 1.5 sq mm.FR PVC insulated copper conductor, single core cable etc as required |
| 161 | 2.7 S/F, panel mounting changeoverProviding and fixing following capiacity 4 pole panel mounting chengeover switches in existing cubical panel board,making connection, earthing the body etc as required. |
| 162 | 2.7.3100amps, 4 pole |
| 163 | 2.8S/F S.P MCB DB:-Supplying and fixing following way single pole nutral, sheet MCB distribution board, 240 volt, in recess, complete with tinned copper busbar, earth bar din bar detachabe gland plate, interconnections, phosphatized and power painted including erthing etx. as required. but without (MCB/RCCB/ISOLATOR) |
| 164 | 2.8.912 Way, Double door |
| 165 | 2.11 S/F 'B' series. S.P.MCB:-Supplying and fixing 6 amps to 32 amps rating,240 volts, 'B' series miniature circuit breaker suitable for lighting and others loads of following poles in the exiting MCB DB complite with connections. Testing and commisioning etc as required. |
| 166 | 2.11.16/32 amps, single pole, \\"B\\" series |
| 167 | 2.12 S/F 'C' series. S.P.MCB:-Supplying and fixing 6 amps to 32 amps rating,240 volts, 'C' series miniature circuit breaker suitable for lighting and others loads of following poles in the exiting MCB DB complite with connections. Testing and commisioning etc as required. |
| 168 | 2.12.1 6/32 amps,single pole, \\"C\\" SERIES |
| 169 | 2.12.6 40 amps , DP |
| 170 | 2.12.7 50/63 amps, DP |
| 171 | 2.12.9 40 amps, TPN |
| 172 | 2.14 S/F DP MCB isoletor:-Supplying and fixing following rating double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commisioning etc as required. |
| 173 | 2.14.140 amps |
| 174 | 2.19 P/F M.V. danger notice plate:-Providing and fixing M.V danger notice plate of 200mm x150mm made of mild steel, at least 2mm thick, and vitreous enamelled white on both sides, and with inscription in single red colour on front side as required. |
| 175 | 3.2G.I Earth pipe electrode with salt charcoal:- Earthing with G.I earth pipe 4.5 mtr long 40 mm dia including accessories and providing masonary enclosure with cover plate having locking arracgement and watering pipe etc. as required. With salt charcoal or coke. |
| 176 | 3.9 S/L 8 SWG copper wire ground :-Supplying and laying 8 SWG copper wire 0.50 metre bellow ground level for conductor earth electrode, including soldring etc. as required. |
| 177 | 4.2 P/F G.I lighting conductor final, Providing and fixing of lighting cunductor finial, made of 25mm dia 300 mm long, copper tue having single prong at top, with 85mm dia 3mm thick G.I base of the finial or any other metalic object as required. |
| 178 | 4.4 Reverting, sweating and soldering of copper/G.I. tape(with another coppr/G.I. tape, base of the finial or any other metallic object) as required. |
| 179 | 4.7P/F G.I Lightning Conductor tape in vertical run:- providing and fixing GI tape 20mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required (for horizontal run) |
| 180 | 4.8P/F G.I Lightning Conductor tape in vertical run:- providing and fixing GI tape 20mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required (for vertical run) |
| 181 | 4.12P/F Testing joint for G.I lighting conductor:- Providing and fixing testing joint, mad of 20mm x 3mm thick G.I strip, 125 mm long, with 4 nos. Of G.I bolts, nuts, chek nuts and spring washer etc complete as required. |
| 182 | 5.1 MV cable laying upto 25 sq.mm. in ground:-Laying of one number PVC insuleted and PVC sheathed/ XLPE power cable of 11 KV grade of size not exceeding 25 sq.mm. direct in ground including excavetion, sand coushioning, protective covering and refilling the trench etc as required. |
| 183 | Code no.S/L PVC XLPE insuletd PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts,(conforms to IS:1554, part-1) |
| 184 | M-740 16 sq.mm. 4 core |
| 185 | DSR 12.37 Supplying and fixing of light class G.I. pipe of 50 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required |
| 186 | 9.1.334x16 sq. mm (28mm) |
| 187 | Anaylised & Approved Supply of surface mounted round/Square circular decorative Surface mounted 15W LED downlighter in powder coated white finish with integrated electronic driver. Make Philips- DN170C-LED-10S-6500-PSUWH / Havells- INEGRA-SURFACE-LHEAAGP7PLIW015 / Bajaj- BGCML-12-01-WH / Wipro- LD81-131-XXX-60-SM. |
| 188 | Anaylised & Approved Supply of recess mounting 34w LED Ultra modern recess mounting luminaire (595mm x 595 mm )suitable for armstrong/grid/POP ceiling complete with sepaarate electronic driver & high brightness SMD LEDs and as per the standard catalogue. LHEWDRP7PL1WO34/Bajaj-BCTBLR-36W-KR-WH/Wipro-LML5-361-XXX 57-XX 35w LED. |
| 189 | Anaylised & Approved Supply of building outer lighting luminaire aerodynamically shaped single piece pressure die-cast aluminum luminaire with high power LEDs as light source and electronic driver (IP65), along with reflector and heat resistant toughened flat glass cover, reflector and heat resistant toughened flat glass cover, reflector and heat resistant toughened flat glass cover (IP65) (Make:- Bajaj-BRTFG45-LED/ philips- BRP409LEDCW036MRFGSIPSUGR/Hevells- LHETAXU7PN6J045/Wipro-LR02-501-XXX-57-XX. |
| 190 | Anaylised & Approved ITC LED 25/90W WTREET LIGHT ON WALL WITH 25 MM DIA.,75metre long GI pipe bend, J/U Hook 4 nos , along with two coat painting of GI pipe bend etc as required |
| 191 | Anaylised & Approved Supply of 1200 mm sweep ceiling fans complete without regulator, double, ball bearing, motor, blades, down rod, canopies, capacitor suitable for opertion on 230 volts, 50HZ, 1 phase , AC supply connection with 1.5sq mm PVC Copper wire complete as required years warranty. Fan shall be approved by engineer incharge/consultant) (COLOR OF CEILING FANS-WHITE-ISI.) Make-Havells Velociy 1200mm /bajaj 48\\" Grace Gold Dx/USHA-TECHNIX-PRL |
| 192 | Anaylised & Approved Supply, fitting, fixing & testing of Wall Fan 400mm 230V with blade, guard (net) , revolving type with regulator system and proper stand and fixing clamps.. Make:- Bajaj 60014 / Crompton WMSDX 120 / Havells Swing. |
| 193 | Anaylised & Approved Providing of box type batten with 18 watt LED lamp along with all accessosries. OFMAKE-Havells/Philips/Bajaj |
| 194 | Anaylised & Approved Providing & fixing of holder type CFL -23 watt lamp. |
| 195 | Anaylised & Approved Providing & fixing of bulkhead fitting without lamp |
| 196 | Add 18% GST |
| 197 | Add 1% Lebour Cess Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
