|
| 1 | Brick work in CM 1:5 (one cement & Five sand) using II class ground moulded bricks of size 9\\"X43/8\\"X 23/4\\" standard specification including finishing, curing, etc., complete complying with standard specification - 100CFT Super Structure in First Floor.(B.D : Page No : 40) |
| 2 | Plastering with cement mortar 1:5 (One cement and five sand) 12mm thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications (B.D : Page No : 46) |
| 3 | Supplying and filling in foundation and basement with filling sand in layers of not more than 15cm thick well rammed watered and compacted - etc., complete complying with standard specification. (B.D : Page No : 26) |
| 4 | Plain Cement concrete 1:4:8 (one cement, four sand, eight aggregate) using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted, etc., complete complying with standard specfication. (B.D : Page No : 28) |
| 5 | Plastering with cement mortar 1:3,20 mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306) (B.D : Page No : 46) |
| 6 | Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete.(1.00mx2.00m) |
| 7 | FabrictionsupplyanderectionoftobulorpostwithTruss(100mm,80mm,75mm)TheRateshallbeincludethecostoftobulorpostTrussmembers,labourchargesformanufacturinganderectionandPaintingetc.,complete.asperdepartmentalspecification and drawings.. (B.D : Page No : 82) |
| 8 | Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three plastering sand (P- Sand)) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete (B.D : Page No : 47) |
| 9 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 x 100 x 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete PWD SOR Pg. No. 63 Sl.No. 239 (PWD : Page No : 62) |
| 10 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance,welding charges, electrical charges, etc. complete (PWD : Page No : 62) |
| 11 | Stainless Steel Sink of size 600x450x200mm with 32mm dia 'B' Class G.I waste water pipe and 32mm dia CP waste coupling. (PWD : Page No : 55) |
| 12 | Supply and Fixing of Cuddapah slab (one side polished) size of 38 / 40mm thick including pointing with CM 1:3 and finishing etc complete., |
| 13 | Supply & Laying in flooring with fully polished sinthetic Grey colour Granite stone of 20mm thick (average) of 4' x 2' in size laid over base layer of cement mortor 1:3 20mm thick and applying cement slurry and pointed with white cement and colour pigments tc the colour stone sand polished neatly as directed by the deparmental officers. (B.D : Page No : 58) |
| 14 | Supplying and fixing in position european water closet of best quality and approved make with 100mm 'P' trap or 'S' trap with double flapped right PVC seat cover with C.p brass hinges with 12.5litres PVC Low level Flushing Tank with all internal fittings etc complete complying with standard specifications labour inclusive of fixing lowlevel flushing tank. (B.D : Page No : 69) |
| 15 | Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers.(B.D : Page No : 69) |
| 16 | Providing & fixing PVC RAIN WATER DOWN FALL PIPE of the following dia with necessary T.W.Clamps Plugs, Shoes, Bemds, other clamps, screws nails etc., complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150x25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of \\"U\\" clamps at the centre of pipes to be fixed.110mm dia PVC Pipe [4 Kg/SqCm](D) (B.D : Page No : 67) |
| 17 | Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).(D) (B.D : Page No : 79)For 110mm PVC Tee |
| 18 | For 110mm PVC Elbow |
| 19 | For 110mm x 63mm PVC Reducer |
| 20 | Supply and delivery of 1000 lit capacity and fixing of HDPE tank as per IS 12701/1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,complete as per standard specification. (TWAD : Page No : 92) |
| 21 | P.V.C. Pipes (10Kg/SqCm) Supplying laying and jointing P.V.C pipes (10Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges.(D)25mm PVC Pipe (B.D : Page No : 07) |
| 22 | 25mm CPVC Pipe (PWD : Page No : 113) |
| 23 | 25mm CPVC Elbow (PWD : Page No : 116) |
| 24 | 25mm CPVC Tee (PWD : Page No : 116) |
| 25 | 25mm PVC Value |
| 26 | 25mm PVC Elbow (PWD : Page No : 105) |
| 27 | 25mm PVC Tee (PWD : Page No : 105) |
| 28 | 25mm PVC Coupler (PWD : Page No : 105) |
| 29 | 25mm CPVC Tank Nipple (PWD : Page No : 117) |
| 30 | 25mm CPVC MTA (PWD : Page No : 117) |
| 31 | 25mm CPVC Elbow (PWD : Page No : 116) |
| 32 | 25mm PVC FTA |
| 33 | 25mm PVC Shoe |
| 34 | Suppling and fixing in position 15mm.diameter brass / C.P screw down tap / pillar tap (heavy duty) of approved make conforming to I.S.specifications and quality including cost of shellac, thread etc.complying with standard specifications and including cutting and threading wherever necessary (D) (B.D : Page No : 76)For SD Tap (7-Toilet) (B.D : Page No : 76) |
| 35 | For Pillar Tap (7-Wash Basin) (B.D : Page No : 76) |
| 36 | For CP Angle cock tap (EWC & Wash Basin) (TWAD : Page No : 166) |
| 37 | Supplying and fixing in position CP two way bib cock with health faucet including cost of teak wood plug and C.P. screws. etc. complete complying with standard specification.(D) (TWAD : Page No : 166) |
| 38 | Supply and fixing of PVC. Nahini / Floor Trap with stainless Steel Gratings- 100 mm x 75 mm including all charges etc, complete as per standard specification.(D) .(B.D : Page No : 74) |
| 39 | Construction of inspection chambers of following sizes with earth work excavation for foundation with Dust Filling 10mm thick and Plain cement concrete bed in C.M. 1:5:10 using 40mm HBG jelly 10mm thick for foundation, 23cm thick brick wall work in C.M. 1:5 for chambers, Inner and Outer Plastering with C.M. 1:3 12mm thick, benching, channelling, 75mm thick RCC loose slab covering in C.M. 1:2:4 mix using 20mm blue granite jelly including necessary reinforcement, etc., complete (Size: 60cmX60cmX60cm) (B.D : Page No : 97) |
| 40 | Supplying and fixing in position best quality P.V.C soil/ waste pipes (6KSC) of various sizes having ISI mark and providing leakproof joints including fixing to the wall with P.V.C/ M.S clamps etc., and making connection to all sanitary fittings, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications.(D) (B.D : Page No : 81) |
| 41 | Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).(D)For 110mm PVC Y (PWD : Page No : 108) |
| 42 | For 110mm PVC Elbow (PWD : Page No : 109) |
| 43 | For 110mm PVC Shoe |
| 44 | For 110mm X 63mm PVC Reducer (PWD : Page No : 108) |
| 45 | For 50mm PVC Elbow |
| 46 | For 110mm PVC Door Elbow (PWD : Page No : 107) |
| 47 | Supply and fixing of 7W / 9W LED Bulb higher end (SD ) (TWAD : Page No : 206) |
| 48 | supply and fixing of 18W LED Round type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting (SD 528) (TWAD : Page No : 206) |
| 49 | Supply and fixing of 1400mm (56\\")sweep AC ceiling fan complete with stepped electronic 300W regulator with the existing down rod on the existing clamps. (TWAD : Page No : 209) |
| 50 | supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting . (SD 535) (TWAD : Page No : 206) |
| 51 | Supply and fixing of 32A TPNMC switch with suitable angle iron frame work with MS cable entry boxes with earth connection only (TWAD : Page No : 210) |
| 52 | Labour charges for over head wiring from EB pole to pumproom by fixing 32mm dia GI pipe to the required height over roof slab of pumproom and as directed by EB authorities including fixing M.S. clamp set, U.Kondi, 7/20 GI wire, 7/20 PVC insulated copper wire reels, T.W. meter board, aerial board, earth plate GI Bolt of nuts, PVC Hose fuse wiring etc. complete |
| 53 | Supply and fixng of TNEB meter board suitable for 3 phase 200A service connection made up of suitable angle iron frame work of size 3 feet x 2 feet using angle iron of size 1-1/2\\" x 1-1/2\\" x 1/4\\" rigidly fixed on wall covered with hylem sheet of size 3 feet x 2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 200A fuse units (500V), 1 No. neutral link, copper earth flat of size 1\\" x 1/4\\" with inter connection of EB meter to fuse units by 19/16 PVC insulated copper wire with earth connection complete SD 131 |
| 54 | Supply and fixing of 4 ways 3 phase DB No. of ways incomer MCB / Isolator - 4 No. of ways incomer ELCB / RCD - 4 No. of outgoings ways - 12 PWD SOR 2021-22 (PWD : Page No : 144) |
| 55 | Painting Two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour with priming coa tincluding the cost all mateials etc.,complete, in all floors (B.D : Page No : 63) |
| 56 | Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m (B.D : Page No : 62) |
| 57 | Writing Name board and Art painting work in building outer wall sides the rate shall be include the cost of artist, paint scaffolding and all labour charges etc.complete.., |
| 58 | ADD GST 18% Please Enable Macros to View BoQ information |
