|
| 1 | Excavating in over areas, n exc 1.5 m deep and getting out in soft/ loose soil complete all as specified. |
| 2 | Removing excavated materials (soils) exc 50.00 mtr but not exc. 250 mtr and depositing where directed at a level not exc 1.50 mtr above the starting point in soil, complete all as specified and as directed. |
| 3 | Returning filling in soft/loose soil, including, spreading, levelling, watering and well ramming in layers not exc. 25 cm complete all as specified and directed. NOTE : The top of filled excavation shall be made proud by using the excavated soil to cater for subsequent settlement of soil. |
| 4 | Material and labour for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregates as in foundation, filling and mass concrete complete all as specified. |
| 5 | Material and labour for reinforced cement concrete M-25 (design mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified.Note:- Reinforcement and form work shall be measured and paid separately |
| 6 | Material and labour for reinforced cement concrete M-25 (design mix) as in columns, pillars, posts and struts complete all as specified.Note:- Reinforcement and form work shall be measured and paid separately |
| 7 | Material and labour for reinforced cement concrete M-25 (design mix) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified.Note:- Reinforcement and form work shall be measured and paid separately |
| 8 | Material and labour for reinforced cement concrete M-25 (design mix) as in chajjas complete all as specified.Note:- Reinforcement and form work shall be measured and paid separately |
| 9 | Material and labour for reinforced cement concrete M-25 (design mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.Note:- Reinforcement and form work shall be measured and paid separately |
| 10 | Material and labour for Use and waste of flat formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished surfaces of concrete complete all as specified and directed. |
| 11 | Material and labour for use & waste of formwork to sides of square, rectangular or polygonal pillars, posts, columns etc for flat rough finished surfaces complete all as specified and directed. |
| 12 | Material and labour for Use and waste of flat formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete complete all as specified and directed. |
| 13 | Material and labour for formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished flat surfaces of concrete complete all as specified. |
| 14 | Material and labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified. |
| 15 | Material and labour for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 16 | Material and labour for Mild steel TMT bars of Fe 500D, 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for chainlink fencing and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified. |
| 17 | Material and labour for TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers & binders, cut to length, bent to shapes required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 18 | Material and labour pre construction anti termite treatment for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified. |
| 19 | Material and labour for pre construction anti termite treatment for treating the bottom and sides of excavation, top surface of filled earth & the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified. |
| 20 | Material and labour for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall all as specified. |
| 21 | Material and labour for PCC 1:2:4 type B2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed. |
| 22 | Material and labour for Rolled steel sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. confirming to Fe 410-W (Gde E- 250) quality-A complete all as specified. |
| 23 | Supply and fix steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1979 grade St.-240 complete all as specified. |
| 24 | Supply and fix Fe-410-W(GdeE-250) qualityA Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified. |
| 25 | Supply and fix mild steel screw bolts (machine made) of dia 16 to 20 mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 10 cm but not exceeding 15 cm long complete all as specified. |
| 26 | Supply and fix BIS certified pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.55 mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.Note: The contractor shall produce necessary Manufacturer test certificate for TCT and MCT to the Engineer-In-Charge for future reference. |
| 27 | Supply and fix BIS certified pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.55 mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.Note: The contractor shall produce necessary Manufacturer test certificate for TCT and MCT to the Engineer-In-Charge for future reference. |
| 28 | Material and labour for prepration new or previously untreated steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. |
| 29 | Material and labour for Precast cement concrete block masonry with solid block 1:3:6 type C1 20 mm graded crushed stone aggregates exceeding 10 cm in width and getting in cement mortar 1:4 complete all as specified. |
| 30 | Material and labour for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick wall or concrete surfaces, finished the surfaces even and smooth without using extra cement complete all as specified. |
| 31 | Material and labour for 20 mm thick rendering in cement mortar 1:4 in two layers (12 mm +8 mm) on external faces of brick wall or concrete surfaces, finished the surfaces even and smooth without using extra cement with using approved LWPC on second layer (8 mm) as per manufacturer instruction complete all as specified. Note: LWPC shall be measured and paid including this item |
| 32 | Material and labour for hardcore of broken boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc.15 cm thick, watered and rammed to a true surface complete all as specified. |
| 33 | Material and labour for 100 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base finished the surface even and fair complete all as specified and directed. |
| 34 | Material and labour for 8 mm thick premium quality light shade double charged vitrified ceramic tiles size not exceeding 0.36 sqm as in floors set and jointed and pointed in white or colour cement to match existing surfaces including 20 mm thick screed bed in cement mortar 1:6 complete all as specified.Make: Somani Ceramic Ltd/ Kajaria Ceramic Ltd/ Varmora Granito Pvt Ltd./ H&R Johnson India/ Orient Bell/ Nitco/ AGLNote: (i) The colour, shade, size and quality of tiles shall be approved after physical verification of GE.(ii) The manufacturer test certificate for double charged tile for consignment of manufacturing alongwith Purchase Voucher shall be produced by the contractor for payment. |
| 35 | Material and labour for 8 mm thick premium quality light shade double charged vitrified ceramic tiles size not exceeding 0.36 sqm as in skirting / dado and in vertical surfaces set and jointed and pointed in white or colour cement to match existing surfaces including 10 mm thick rendering in cement mortar 1:3 complete all as specified.Make: Somani Ceramic Ltd/ Kajaria Ceramic Ltd/ Varmora Granito Pvt Ltd./ H&R Johnson India/ Orient Bell/ Nitco/ AGLNote: (i) The colour, shade, size and quality of tiles shall be approved after physical verification of GE.(ii) The manufacturer test certificate for double charged tile for consignment of manufacturing alongwith Purchase Voucher shall be produced by the contractor to the Engineer-In-Charge for future reference. |
| 36 | Material and labour for premium quality double charged glazed ceramic colour tiles of size 600x300x7mm/ 450x300x7mm thick as in skirting / dado and in vertical surfaces set and jointed and pointed in white or colour cement to match existing surfaces including 10 mm thick rendering in cement mortar 1:3 complete all as specified.Make: Somani Ceramic Ltd/ Kajaria Ceramic Ltd/ Varmora Granito Pvt Ltd./ H&R Johnson India/ Orient Bell/ Nitco/AGLNote: (i) The colour, shade and quality of tiles shall be approved after physical verification of GE.(ii) The manufacturer test certificate for double charged tile for consignment of manufacturing alongwith Purchase Voucher shall be produced by the contractor to the Engineer-In-Charge for future reference. |
| 37 | Supply and fix 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified. |
| 38 | Supply and fix 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified. |
| 39 | Supply and fix powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 40 | Supply and fix powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in- Charge. |
| 41 | Supply and fix anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-In- charge. |
| 42 | Supply and fix PVC door frame of size 50 mm X 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified. |
| 43 | Supply and fix 30 mm thick factroy made solid panel PVC door shutter (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with neat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuct inside the solvent cement for style and single side pre laminated PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rails and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded to the style and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification . |
| 44 | Supply and fix 4 mm thick sheet glass, ordinary quality and glazing in square in aluminium joinery in each pane complete all as specified. |
| 45 | Supply and fix 4 mm thick figured glass, pin head type and glazing in square in aluminium joinery in each pane complete all as specified. |
| 46 | Supply and fix 125 mm long medium weight, cold rolled mild steel, Butt hinges, complete all as specified. |
| 47 | Supply and fix 75 mm long medium weight, cold rolled mild steel, Butt hinges, complete all as specified. |
| 48 | Supply and fix 200 mm long aluminium anodised barrel tower bolts of extruded section all as specified. |
| 49 | Supply and fix 100 mm long aluminium anodised barrel tower bolts of extruded section all as specified. |
| 50 | Supply and fix 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified. |
| 51 | Supply and fix 150 mm long aluminium alloy handles, fabricated type, anodized all as specified. |
| 52 | Supply and fix 100 mm long aluminium alloy handles, fabricated type, anodized all as specified. |
| 53 | Supply and fix small fittings (1st class hard wood) such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cucm each complete all as specified. |
| 54 | Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new wall surfaces. |
| 55 | Material and labour for preparation of new wall surfaces and applying distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre of approved manufacturer of required shade and colour complete, as per manufacturer's specification. Two or more coats over a coat of wall care putty complete all as directed. |
| 56 | Material and labour for preparation of new wooden surfaces of girth or width exc 10 Cms and applying two coat of synthetic enamel paint after priming with pink primer. |
| 57 | Supply and fix vitreous china wash down water closet pan (pedestal pattern) with seat and cover closed pattern flat bottom, and mild steel chromium plated or aluminised hinging device white colour with 'P' or 'S' trap including connection to drains (or outgoing pipes) and to the flushing pipes, complete all as per manufacturer instruction |
| 58 | Supply and fix Vitreous China wash basin, white, flat back, size 580 mm x 450 mm including 32 mm dia waste fittings and waste pipe including brackets complete all as specified. |
| 59 | Supply and fix 10 ltrs capacity PVC valveless syphonic action type, low level flushing cistern, white with inlet, ball valve float and handle including brackets and 32 mm dia PVC low or high density flush pipe complete all as per manufacturer instructionMake Parryware Cat No E8109 / Cera Cat No B1020101/ Johnshon Cat No P2831PW |
| 60 | Supply and fix brass CP single lever basin mixer for mixing hot and cold water including 15 mm bore hot water pipe duly insulated with glass wool and aluminium cladding complete all as specified.Make:- Parryware Cat No G3165A1/ Jaquar Cat No COP-001BPM / Johnshon Cat No T6045C |
| 61 | Supply and fix for 15 mm dia cast copper alloy chromium plated two way Bib cock with wall flange concealed type screwed down for iron pipe or for unions complete all as Per manufacturer instruction.Make :- Parryware Cat No G2381A1/ Cera Cat No F1016163/ Johnson Cat No T3370C |
| 62 | Supply and fix 15 mm dia cast copper alloy chromium plated Angle valves, with wall flange concealed type screwed down for iron pipe of for unions complete all as specified and directed. Make :- Parryware Cat No T3907A1/ Cera Cat No F1016201/ Johnson Cat No T5310C |
| 63 | Supply and fix Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as directed for 20 mm bore all as specified. |
| 64 | Supply and fix CP health faucet with tube and wall hook including all fittings as per manufacturer instruction.Make: Parryware Cat No T9961A1/ Jaquar Cat No ALD-579 / Johnson Cat No S0826C |
| 65 | Supply and fix soap dish holder (polycarbonate) as per manufacturer instruction.Make:- Jaquar / Parryware/ Johnson |
| 66 | Supply and fix 6 mm thick frameless bathroom looking mirror size 600 mm x 450 mm alongwith stainless steel desigm bolt complete all as specified.Make: Jaquar & Company Private Limited. / Cera/ Saint Gobain/ Modiguard/ Prayag Polymer Pvt. Ltd. |
| 67 | Supply and fix corner glass shelf of size 300 mm radius (with brass chromium plated brackets) fixed in wall with necessary screws etc. complete all as per directed by Engineer-In-Charge.Make: Prayag Polymer Pvt. Ltd./ Saint Gobain/ Modiguard/ Jaquar & Company Private Limited./ Cera |
| 68 | Supply and fix Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified.Make: Prayag Polymer Pvt. Ltd./ Saint Gobain/ Modiguard/ Jaquar & Company Private Limited./ Cera |
| 69 | Supply and fix 20 mm dia brass chromium plated tubular towel rail and 600 mm long with brackets, complete all as specified.Make:-Jaquar Cat No ACN-1111SM/ Parryware Cat No T6001A1/ Cera Cat No F5007103 Please Enable Macros to View BoQ information |
| 70 | Supply and fix 20 mm dia brass chromium plated tubular towel rail and 600 mm long with brackets, complete all as specified.Make:-Jaquar Cat No ACN-1111SM/ Parryware Cat No T6001A1/ Cera Cat No F5007103 Please Enable Macros to View BoQ information |
