|
| 1 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc complete all as specified and as directed. |
| 2 | Taking down shutters of any description area exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed. |
| 3 | All as per BOQ Serial item No 2 above but area exc 2 Sqm each complete all as specified and directed. |
| 4 | Taking down of steel window with guard bar any size/ area complete all as specified and directed. |
| 5 | Taking down of shutter and refixing of shutters of any discription in the same opening after easing and adjusting area n exc 1 sqm each complete all as specified and directed. |
| 6 | Taking down of shutter and refixing of shutters of any discription in the same opening after easing and adjusting area exc 1 Sqm and n exc 2 sqm each complete all as specified and directed. |
| 7 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) area not exc 1.5 Sqm each and removing from site complete all as specified and directed. |
| 8 | All as per BOQ Serial item No 7 above but area exc 1.5 sqm and not exc 4 Sqm each and removing from site complete all as specified and directed. |
| 9 | Preparation of old surfaces of wall and M&L for applying one coat of cement base paint externally complete all as specified and directed. |
| 10 | Preparation of old decorated surfaces and M&L for applying one coat of exterior acrylic emulsion painting on walls complete all as specified and directed. |
| 11 | Preparation of old decorated surfaces and M&L for applying two coats of exterior acrylic emulsion painting on walls complete all as specified and directed. |
| 12 | Preparation of old decorated surfaces of walls/ceilling by washing rubbing down and stopping of distempered and painted surfaces and M&L for applying one coat of oil bound distemper (oil emulsion) on walls/ceilling complete all as specified and directed. |
| 13 | Preparation of old decorated surfaces of wall and stopping of painted surface and M&L for applying one coat of interior plastic emulsion paint on walls complete all as specified and directed. |
| 14 | All as per BOQ Serial item No 13 above but as on ceiling complete all as specified and directed. |
| 15 | Preparation of old decorated surfaces of wall and M&L for applying two coats of interior plastic emulsion painting over a coat of primer on walls complete all as specified and directed. |
| 16 | Preparation of the uneven surfaces of walls and M&L for applying two layer of wall care putty after complete removal of existing treatment complete all as specified and directed. |
| 17 | Preparation of old wooden surfaces of any description having width/girth exceeding 10cm and M&L for applying one coat of synthetic enamel paint complete all as specified and directed. |
| 18 | Preparation of old steel surfaces of any description having width/girth exceeding 10cm and M&L for applying one coat of synthetic enamel paint complete all as specified and directed. |
| 19 | M&L for two coats of lacquer based polish to existing wooden surfaces over 10cm width/girth including complete removal of existing finish using emery paper of suitable grade, making the surface smooth using good putty complete all as specified and directed. |
| 20 | S&F decorative wallpaper over a coat of primer on wall surface complete all as specified and directed. |
| 21 | Preparation of old surface include brooming down or steel wire rushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots of old surface of floor tiles/paver block and M&L for applying one coat of apex floor guard paint etc complete all as specified and directed. |
| 22 | Preparation of old surface include brooming down or steel wire rushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots of old surface of floor tiles/paver block and M&L for applying two coats of apex floor guard paint etc complete all as specified and directed. |
| 23 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 24 | S&F Steel work of MS Square/round pipe as in purline, rafter, post and trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.Note: Work shall be carried out to bldgs upto height of 4 storey. |
| 25 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete and similar work conforming Fe-290, Gde E-165 complete all as specified and as directed. |
| 26 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed. |
| 27 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc, complete all as specified and directed.Note: Work shall be carried out to bldgs upto height of 4 storey. |
| 28 | S&F Pre-painted mangalore pattern galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc, complete all as specified and directed.Note: Work shall be carried out to bldgs upto height of 4 storey. |
| 29 | S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc, complete all as specified and directed.Note: Work shall be carried out to bldgs upto height of 4 storey. |
| 30 | M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for inseritng roof sheet in wall, etc., and making good, cutting not exc 10 cm girth in brick wall. complete all as specified and directed.Note: Work shall be carried out to bldgs upto height of 4 storey. |
| 31 | M&L for RCC 1:2:4 Nominal mix using 20 mm graded stone aggregate as in chajja, beam, facia, fin, facia, parapets balcony and similar suspended work complete all as specified an directed. |
| 32 | S&F 12 mm dia wall anchor fasterner system machanical/epoxy based of standard make for conactions in concrete i/c power drilling. Cleaning of holes by air blowing, insertion of epoxy cartridge with plastic nozzles as required, placing internally threaded screw driving of boltes etc, complete all as specified and directed.Note: Work shall be carried out to bldgs upto height of 4 storey. |
| 33 | Preparation of new steel surfaces of any description having width/girth exceeding 10cm and M&L for applying two coats of synthetic enamel paint over & including a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 34 | S&F in repairs 15 mm bore tube medium grade galvanised with all fittings fixed complete to wall and ceiling or laid in floors complete all as specified and directed. |
| 35 | All as per BOQ Serial item No 34 above but bore in 20 mm complete all as specified and directed. |
| 36 | S&F in repairs sensor of wall mount urinal as per sample complete all as specified and directed. |
| 37 | S&F in repairs stain less steel hand dryer as per sample complete all as specified and directed.Make: Cera or equivelent as approved by GE |
| 38 | S&F in repairs CP wash hand basin mixture for mixing hot and cold water including joints to 15 mm bore pipes or union and plugging and screwing to wall with all fittings, complete all as specified and as directed. |
| 39 | S&F in repairs 15 mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 40 | S&F in repairs CP wall mixture telephonice type for mixing hot and cold water including three joints to 15 mm bore pipes or union and plugging and screwing to wall with shower conection with all fittings, complete all as specified and as directed. |
| 41 | S&F in repairs angular stop cock made of brass chromium plated screwed both ends for iron pipe for 15mm bore complete all as specified and directed |
| 42 | S&F in repairs 15mm bore CP stop cock fancy type, with crutch or butterfly handle complete all as specified and as directed. |
| 43 | S&F in repairs 15 mm bore two way Bib tap CP, screwed down screwed for iron pipe complete all as specified |
| 44 | S&F in repairs 15 mm bore Bib tap CP long body, screwed down screwed for iron pipe complete all as specified and directed. |
| 45 | S&F in repairs 15 mm dia bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed .(Minimum weight 15mm-90gms) complete all as specified and directed. |
| 46 | S&F in repairs 15 mm dia pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms) complete all as specified and directed. |
| 47 | S&F in repairs 15 mm dia stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) complete all as specified and directed. |
| 48 | S&F in repairs 15 mm dia angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) complete all as specified and directed. |
| 49 | S&F in repairs Factory made 800 mm x 600 mm bevelled edge mirror of selected quality glass, fency type and fixed with chromium plated brass screws and cup washers complete all as specified and as directed. Make: Parryware or equivalent as approved by GE. |
| 50 | S&F in repairs 600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 51 | S&F in repairs CP papper holder fency type complete all as specified and as directed. |
| 52 | S&F in repairs CP soap dish fency type complete all as specified and as directed. |
| 53 | S&F in repairs towel rack stainless steel 600mm long complete all as specified and as directed. |
| 54 | S&F in repairs towel rail of brass chromium plated tube 19 to 20 mm dia 600 mm long `D' type complete fixed in repairs with brass chromium plated screw complete all as specified and directed. |
| 55 | S&F in repairs brass CP shower roses with or without swivel joints,with shower arm, 125mm size, including fixing to steel pipes or union complete all as specified and as directed. |
| 56 | S&F in repairs shower panel aluminium aloy body size 200x1500mm, overhead shower, hand shower and 4 body massage jet, CP hand shower with 1.5 meter long hose with stainless steel finish, complete all as specified and as directed. |
| 57 | S&F in repairs vitreoues china WHB, white, flat back, Table Top and wall hung with & including CI brackets, Bottle Trap, CP Pillar tap fency type, CP connector pipe 15mm bore and 450mm long complete all as specified and as directed. |
| 58 | S&F in repairs vitreoues china WHB, white, flat back, of size 550X400mm with & including CI brackets, CP waste coupling 32 mm bore, PVC waste pipe 32mm dia, PVC connector pipe 15mm bore and 450mm long with PTMT coupling at both ends complete all as specified and as directed. |
| 59 | S&F in repairs 32 mm dia PVC flush pipe of polyethylene of low or high density for low level cistern/kitchen sink/WHB complete all as specified and as directed. |
| 60 | S&F in repairs Chromium Plated towel ring square with round flange complete all as specified and as directed. |
| 61 | S&F in repairs PVC connection 15 mm size pipe with PTMT nut of Length 600mm complete all as specified and as directed. |
| 62 | S&F in repairs 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete all as specified and directed. |
| 63 | S&F in repairs PVC water closet seat cover heavy duty coloured closed pattern with flat bottom and cover and mild steel CP hinnging device complete all as specified and directed. |
| 64 | S&F in repairs vitreous china squatting pan of orissa pattern long pan of size 580 mm x 440mm with integral foot rest white with cast iron p or s trap with back inlet including flush pipe of suitable length to connection with existing cistern & make good complete all as specified and as directed. |
| 65 | S&F in repairs, vitreous china wash down water closet pan, (pedestal pattern) white, including P or S trap and with plastic water closet seat cover white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed. |
| 66 | S&F in repairs vitreous china white wash down water closet wall hung with flushing cistern, hush seat cover and internal fittings complete with fixing bolts and making all necessary connections complete all as specified and directed. |
| 67 | S&F in repairs 12mm thick toughened glass for shower pation openable/ sliding type fixed with aluminium frame complete, fixing bolts,handle and all necessary fittings complete all as specified and directed. |
| 68 | S&F in repairs CP hand shower (faucet) fancy type with one meter flexible tube with wall hook complete all as specified and directed. |
| 69 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., (measured overall as fixed along the centre line over fittings and accessories) including removal of debris outside MoD land complete all as specified and directed. |
| 70 | S&F in repairs 75mm PVC (SWR) multi floor trap with steel grating including jointing with solvent cement complete all as specified and as directed. |
| 71 | S&F in repairs 110mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete all as specified and as directed. |
| 72 | S&F in repairs 110 mm bore PVC(SWR) pipe bend single socket complete all as specified and as directed. |
| 73 | Dismangling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceavble tiles from site and rubish off the premises outside MoD land complete all as specified and directed. |
| 74 | Demolition of cement concrete on Ground, floors, (other than ground floors) including removel of debries out side MoD land complete all as specified and as directed |
| 75 | M&L for PCC type D-2 1:4:8 using 40mm graded stone aggregate, 75 mm thick as in sub base for floors, complete all as specified and directed. |
| 76 | M&L for 25 mm thick PCC 1:2:4 type B-0 (12.5 mm graded stone aggregate) as in sub base of floor, complete all as specified and directed. |
| 77 | M&L for Non-skid coloured ceramic floor tiles 7 to 8 mm thick area of each tile exc. 11 sqm but n exc 0.18 sqm in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including 15 mm thick screed bedding in CM (1:4), complete all as specified and directed. |
| 78 | M&L for coloured Glazed ceramic tiles in vertical surfaces 450x300x7 mm and 600x300x7 mm thickness on vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10 mm thick backing coat in CM 1:3 including complete all as specified and directed. |
| 79 | M&L for Double charge colour Vitrified ceramic tiles 10mm thick (square/ rectangular) light shade polished area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm in floor, set and jointed in neat cement slurry and pointed in white or colour cement to match with and including of 15 mm thick screed bedding in CM (1:4), complete all as specified and directed. |
| 80 | All as per BOQ Serial item No 79 above but in vertical surfaces such as skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 10mm thick rendering in CM (1:3) as backing coat, complete all as specified and directed. |
| 81 | M&L for 25 mm thick glazed coloured chequered cement concrete tiles glossy finish with mixture of grey cement with pigment area of tiles not exceeding 0.16 sqm over & including 15 mm thick screed bed in CM (1:4) set jointed and pointed in neat cement slurry in floors complete all as specified and directed. |
| 82 | M&L for Granite slab (of any type) 18-20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window-cills,cooking platforms including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade including 15mm thick rendering/screed bed in CM (1:4) as backing coat, complete all as specified and directed. |
| 83 | M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregates as in bed blocks for hold fasts including making good or disturbed portion with plaster to match with existing surface complete all as specified and directed. |
| 84 | S&F curtain rods decorative aluminium alloy with fixing brackets including taking down old pelmet box making wood on wall complete all as specified and directed. |
| 85 | S&F bracket decorative type for curtain rods aluminium alloy complete all as specified and directed. |
| 86 | S&F in repairs floor door stopper of brass body and tongue with hard drawn steel spring, overall length cover plate 150mm complete all as specified and as directed. |
| 87 | Resecuring or easening, adjusting without taking down of shutters area exc 1 Sqm and n.exc 2 Sqm each in situ complete all as specified and as directed. |
| 88 | S&F in repairs stay/ handle cleat as per requirement at site and welded complete for fixing of handle /stay in steel windows including taking down old one complete all as specified and as directed. |
| 89 | S&F in repairs 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamferred put together with Glue, pinned at joints complete all as specified and as directed. |
| 90 | S&F in repairs 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 91 | S&F in repairs mortice lock set combipack with 6 lever and with decor brass handle set complete all as specified and as directed.Make: Godrej Cat No 8286 or equivalent make as approved by GE |
| 92 | S&F in repairs mortice lock set combipack with 6 lever and with decor brass handle set complete all as specified and as directed. |
| 93 | S&F in repairs for steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and as directed. |
| 94 | All as per BOQ Serial item No 93 above but without glazing bars complete all as specified and as directed. |
| 95 | S&F 35mm thick 2nd class hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauze ect (wihout sash bars), edge of framing plain, chamferred or rounded, fitted with cut and mitred beads for securing glass etc sizes of memebers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and as directed. |
| 96 | S&F Solid PVC Moulded Door Frame of size 50mm x 47mm made out of 5mm Moulded/printed PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification & drawing complete all as specified and as directed. |
| 97 | S&F Factory made solid panel PVC Moulded door shutter 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick Moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face in frame complete all as specified and as directed. |
| 98 | S&F in repairs 100mm long butt hinges medium weight, cold rolled mild steel complete all as specified and as directed. |
| 99 | M&L for Hacking Out Old Broken Glass (any thickness, size, quality or description) from Wooden/steel Frames, Glazed with Putty or fixed with Beads including removal of debris outside MoD land complete all as specified and as directed. |
| 100 | M&L for Sheet Glass, 3.0mm thick glazing with Beads or Oil Putty, not exc. 0.50 sqm in Each Pane, complete all as specified and as directed. |
| 101 | All as per BOQ serial item No 100 above but figured pinheaded complete all as specified & directed |
| 102 | S&F in repairs 150 mm long aluminium anodised , barrel tower bolts of extruded section complete all as specified and as directed. |
| 103 | S&F in repairs 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 104 | S&F in repairs aluminium alloy anodised sliding door bolts and hasp and staple (Bolt type) and fixing clips of sheets cast or extruded sections and fixing bolts and sliding bolts or extruded section ot cast alum alloy and fixed length of bolt 300mm complete all as specified and as directed. |
| 105 | Preparation of new or previous untreated wood and wood based surfaces of any description over 10 cm girth or width not otherwise described and M&L for applying two coats of Synthetic enamal paint over & including a coat of pink primer complete all as specified and as directed. |
| 106 | S&F in repairs 150 mm long fency type brass barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed. |
| 107 | S&F in repairs 150 mm aluminium handles, cast type, anodised complete all as specified and as directed. |
| 108 | S&F in repairs 150 mm long fency type brass handles, fabricated type, anodised complete all as specified and as directed. |
| 109 | S&F in repairs 125 mm long fency type brass handles, fabricated type, anodised complete all as specified and as directed. |
| 110 | S&F in repairs Brass sliding door bolt 300 mm long with sand or die-cast brass hasp, staple ( Bolt type) and fixing with rolled or drawn brass bolts complete all as specified and as directed. |
| 111 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 112 | S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 113 | S&F Framed work such as grills to window/ventilation, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 complete all as specified and as directed. |
| 114 | M&L for 4 mm thick teak wood Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work complete all as specified and as directed. |
| 115 | S&F powder coated aluminium sliding windows on 2 tire frame of section 64mm x 30mm x 1.55mm and shutters of section 20mm x 40mm x 1.55mm fixed with 5mm thick plain sheet glass with 25 micron solar control film reflective type rubber gasket, handles, fixed with aluminium frame with all necessary fittings etc complete all as specified and as directed. |
| 116 | S&F in repairs powder coated aluminium sliding windows sliding on 3 tire frame of section 92mmX30mm X1.55mm and shutters of section 20mm X40mm X1.55mm fixed with 5mm thick coloured sheet glass/wiremesh with rubber gasket , handel lock, 'U' channel with including with all fittings etc complete all as specified and as directed. |
| 117 | S&F in repairs power coated aluminium door shutter fixed including roller machine with rubber gasket, stopper, cleats, handles etc complete incl aluminium door styles of size 80 mm x 38 mm x 2.00 mm and aluminium door section of top, bottom and lock rail shutter frame of 80 mm x 38mm x 2.00 mm taking down old door with all necessary fittinngs complete all as specified and as directed. |
| 118 | S&F in repairs aluminium anodised Partition wall of frame size 80mm x 38mm x 3.00 mm with standard beads/glazing clips, locking arrangement etc with necessary all fittings also including 5mm thick plain Sheet Glass and 9mm thick prelaminated particle board interior grade (both sid elaminated) as require in the partition, complete all as specified and as directed. |
| 119 | S&F in repairs 4.8 mm plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area of glass not exc 0.5 sqm each pane complete all as specified and as directed. |
| 120 | M&L for 9 mm thick prelaminated partilce boards interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screw to timber frame for pelmet boxes,aluminium door and aluminium partitions complete all as specified and as directed. |
| 121 | M&L for repairing of Aluminium door shutters fixed /side hang/sliding type with & including all necessary jointing cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading , screws, etc and locking arrangement as required for making the shutter functional complete all as specified and as directed. |
| 122 | M&L for repairing of Aluminium Window shutters fixed /side hang/sliding type with & including all necessary jointing cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading , screws, etc and locking arrangement as required for making the shutter functional complete all as specified and as directed. |
| 123 | S&F in repairs aluminum (extruded section Body) body door closer hydraulically regulated design No 3( Make Hyper) suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed. |
| 124 | M&L for double action floor spring hydraulically regulated made up of minium 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed. |
| 125 | M&L for rendering 15mm thick plaster in CM (1:4) on fair faces of brick or concrete surface of wall and finished even and smooth without using extra cement, complete all as specified and directed. |
| 126 | M&L for rendering 15 mm thick on fair faces of brick work in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 127 | All as per BOQ serial item No 126 above but 5mm thick in CM (1:3) as In celling complete all as specified and as directed. |
| 128 | Preparation of newly plastered wall surfaces and M&L for applying two coat of cement base paint over & including a coat of cement primer complete all as specified and as directed. |
| 129 | Preparation of new plastered surface of wall and M&L for applying two coats of Oil bound distemper over a coat of primer complete all as specified and directed. |
| 130 | All as per BOQ Serial Item No 129 above but on ceiling complete all as specified and as directed. |
| 131 | Demolition of brick work or stone /boulder masonry built in cment mortar or cement lime mortar including removing demolished materials outside MoD land complete all as specified and as directed. |
| 132 | M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed. |
| 133 | M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in c.m 1:4 complete all as specified and as directed. |
| 134 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets etc. complete all as specified and as directed. |
| 135 | M&L for false ceiling with 4 mm thick high pressure steam curd (HPSC) no asbestos building boards fixed over GI poweder coating white or framed work GI grid consisting of main Tee section of size (15mm x 30mm), cross Tee section of size (15mm x 23mm), and powder coating GI wall angle of size (20mm x 20mm) suitable for mounting tiles of 595 x595 mm with 1.5 mm dia GI wire suspended including fabrication complete as per manufacturers instructions fixed with steel rawl plug with nut and bolts arrengement with gred size 60 x 120 cm complete all as specified and as directed. |
| 136 | M&L for suspended false ceilling system using metalic exposed suspende system, grid section size 600mm x 600mm comprising of GI powder coated main runner of dimension 39 mm x 24mm x 0.80mm thick ( thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of Runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X 24mm x 0.8 mm thick wall angle 22.2mm x22.2mm x 0.65 mm thick ( thickness comprising of GI/0.35 + PPPCGS/0.3 mm & Weight of angle 0.70 kg for 3050 mm length) with and including 6 mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid ( placed in the grid system duly suspended with 4 mm dia G I bars hangers fixed with steel dash through fasteners from purlins of the roof with necessary fittings and fixtures etc complete all as specified and as directed. |
| 137 | S&F in repairs 6 mm thick Gypsum board/calcium silicate board tiles of size 600x600 mm incl proper hanging arangement as required complete all as specified and as directed. |
| 138 | Dismantling bitumenous felt of any type and removal of debris outside MoD land complete all as specified and directed.Note: Work shall be carried out to bldgs upto height of 12 storey. |
| 139 | M&L for Water Proofing Treatment on existing cleaned RCC Roof with the following Specifications and Manufacturer's instructions, complete all as specified and as directed :- (a) Rendering 10mm thick in Cement Mortar 1:4, Plastered Surfaces finished Even and Smooth. The Plastered Surfaces shall be cured properly for 7 Days by Ponding of Water over Roof. (b) Preparing and cleaning of fully dry Plastered Surfaces as per IS:3067-1966. (c) Applying Bitumen Primer conforming to IS-3384-1986 over the Cleaned Plastered Surface @ 0.30 Litre per Sqm. (d) Applying evenly One Coat Blow Hot Bitumen of grade 85/25 @ 1.20 Kg per Sqm on Primed Surfaces. (e) Applying a layer of APP based Polymeric Membrance 3.0mm thick (minimum) weighing 3.50 Kg per Sqm (reinforced) with Polyster Non-woven Fabric weighing not less than 160 Grams per Sqm by Torch application. The Overlaps shall be minimum 100mm on the Transverse direction and 75mm on Longitudinal direction. (f) Applying One Coat of Aluminium Paint @ 0.10 Litre per Sqm over APP based Polymeric Membrane.Note: Work shall be carried out to bldgs upto height of 12 storey. |
| 140 | S&F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed. Note: Each line wire to be measured |
| 141 | S&F in repairs concertina coil of dia (600/900mm) fixed in steel brackets hooked properly etc complete all as specified and directed. |
| 142 | S&F in repairs coloured acrelic sheets to steel frames including necessary fittings and fixtures etc complete all as specified etc complete all as specified and directed. |
| 143 | Dismantling and removing all unsound/weak concrete materials from slabs, lintel,chajja, fin, facia etc. for 25mm average thickness by any means as directed by engr-in-charge including tapering all edges, making square shoulders of cavities air or sand blasting etc and cleaning of exposed concrete surface of lightly picking materials by air blasting or sand blasting incl foreign matrials , loose concrete/aggregate etc and disposal of all debris out of MOD land upto ten storey bldg and complete all as specified and directed. |
| 144 | M&L for Removing of concrete all around reinforcement upto 12 mm dia bar including from behind the reinforcing bars to give an avrage 25 mm (but not less than 15 mm clear air gap) by manual methods (using wire brushing, chiselling etc) and applying alkaline rust removing chemical followed by removing rust by emery paper and cleaning the area throughly by water and allow it to dry all as per manufacturer,s instruction to give it a totally rust free finished steel surface complete all as specified and directed (Make: SIKA/FOSROC or equivalent make as approved by GE). |
| 145 | Prepration of exiting reinfoecement surface by brush and M&L for application of two coats of Epoxy Zinc rich primer on the prepared steel surface excluding behind the bar by brush the primer shall have a minimium specific gravity 1.75 minimum weight minimum adhesive bond strength with steel is 1.5N/mm2 complete all as specified and directed. Make: SIKA/FOSROC or equivalent make as approved by GE |
| 146 | M&L for providing single coat of epoxy bond adhesive of prepared non metallic surface (existing surface) and applying by brush all as per manufactures instruction/specification. The bonding agent shall have minimum compressive strength of 40 N/Sqmm and complete all as specified and directed.Note: Work shall be carried out to bldgs upto height of 10 storey. |
| 147 | M&L for introducing TMT bars up to 12mm dia for structural connections in RCC Bram, Lintels, Columns and slabs uncluding power drilling holes of appropriate diameter in reinforced of plain cement concrete to a minimum depth of 150 mm and upto 200 mm including power drilling , fixed the reinforcement in position using epoxy of loose dust by blowing air, sealing with epoxy cartridges etc complete bldg all as specified and directed.Note: Work shall be carried out to bldgs upto height of 10 storey. |
| 148 | Supply, mixing for providing and applying at two component structural grade polymer modified reinstatement morter, up to the thickness of 15mm over a coat of epoxy resin boanding agent as per manufacturer instruction where local spalling has taken place or shuttering is not possible . The morter can be applying in layers not exceeding 6mm thick in each layer in and upto any thickness in smaller vertical pockets and upto any thickness in horizontal applications. The mortar should have a minimium compressive strength 12N/mm2 in 1 day and 45N/mm2 in 28 days. Minimum flexural strength should be 8 N/mm2 in 28 days. A modified styrene butadience emulsion for use as a bonding aid and gauging liquid for cementious system to be mixed with cement slurry before the application of modified polymer mortar to be used @ 6 ltr/bag of cement. The bonding agent should have minimium compressive strength 24N/mm2. Minimum tensile strength 3.5N/mm2, minimium flexural strength 6.5N/mm2 complete all as specified and directed upto 25 mm average thickness Make :- Sika/Fosroc or equivalent as approved by GE NOTE:- (i) Cement and sand morter in proportion of 1:2 graded coarse sand ) with polymer admixed in proportions(ii)Work shall be carried out to bldgs upto height of 10 storey. |
| 149 | M&L for supply, mixing and placement of micro concrete cement based prepacked single component chloride free sulphate free, non-shrink, free flow etc compacting, ready to use after mixing water in specified portion and in required thickness as per manufacturer instruction including necessary form work . compressive strength (ASTM C 109,cm cube ) of 35 MPa at 28 days including application curing compound at various location in bldg complete all as specified and directed. |
| 150 | M&L for applying of high efficiency polymeric resin base film forming curring compound or equivalent, Over concrete surface with max coverage area 5.0 sqm per liter as per manufactures instructions, complete all as specified and directed.Note: Work shall be carried out to bldgs upto height of 10 storey. |
| 151 | S&F rotational moulded poly-ethylene water storage tanks of 500 ltr capacity, (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing water tank and remove from site complete all as specified and directed. |
| 152 | S&F rotational moulded poly-ethylene water storage tanks of 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing water tank and remove from site complete all as specified and directed. |
| 153 | S&F rotational moulded poly-ethylene water storage tanks of 2000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing water tank and remove from site complete all as specified and directed. |
| 154 | S&F in repairs 20mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed |
| 155 | S&F in repairs 25mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed |
| 156 | S&F in repairs 50mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed |
| 157 | S&F in repairs for Gun-metal, globe or gate valves, with iron wheel head, screwd both end for iron pipe and fixed 20 mm dia complete all as specified and directed. |
| 158 | S&F in repairs for Gun-metal, globe or gate valves, with iron wheel head, screwd both end for iron pipe and fixed 25 mm dia complete all as specified and directed. |
| 159 | S&F in repairs 12mm thick toughened glass door fixing to glass partition/Aluminum Frame including necessery stainless steel fitting and fixture etc complete all as specified and directed. |
| 160 | S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed complete all as specified and directed |
| 161 | S&F 25mm dia stainless steel handle of 400mm length including necessary fiting and / fixture to glass door etc. complete all as specified and directed. |
| 162 | S&F Roller blinds of required shape size and colour any description of approved make complete all as specified and directed. |
| 163 | S&F in repairs Polycarbonate sheeting with side lap fixed with coach screw and washer in roof, wall etc with wind ties by L-type or J-type or cranked hook bolts etc including wind ties and connected fittings complete all as specified and directed. |
| 164 | S&F in repairs Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc with L-type or J-type or cranked hook bolts etc complete all as specified and directed. |
| 165 | S&F in repairs 18 mm thick Plywood, grade BWP, type BB, fixed with screws to timber/aluminum frame work etc complete all as specified and as directed. |
| 166 | S&F 0.9 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instruction complete all as specified and as directed. |
| 167 | S&F stainless steel hydraulic hinges fixed to cabinets etc complete all as specified and as directed. |
| 168 | S&F Brass Locks, cupboard, grade I, size 50 mm two levers complete all as specified and as directed. |
| 169 | S&F telescopic chanels of any length fixing to cabinets for drawers etc complete all as specified and as directed. |
| 170 | S&F 100 mm long Brass handles, cast type, polished bright complete all as specified and as directed. |
| 171 | S&F in repairs 32/40 mm Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary complete all as specified and directed Please Enable Macros to View BoQ information |
