Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thick above or below ground level complete and disposal of unserviceable material, debris and rubbish to a distance not exceeding 100m complete all as specified and directed. |
| 2 | Demolition of cement concrete (reinforced) in ground floor and paving n.exc 15 cm thick above or below ground level complete and disposal of unserviceable material, debris and rubbish to a distance not exceeding 100m complete all as specified and directed. |
| 3 | Demolition of brick work or stonework built in cement mortar including all quoins, arches pillars etc but excluding ashlar facings ,dressed stonework and precast concrete articles and stacking the serviceable materials within 100m and disposal of unserviceable material, debris and rubbish to a distance not exceeding 100m complete all as specified and directed. |
| 4 | Taking down cement plaster including backing etc from brick/stone walls / concrete surfaces including raking out joints, hacking for key , scrubbing down with water etc complete all as specified and directed |
| 5 | Dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing), removing and rubbish of the premisses, complete all as specified. |
| 6 | Taking down and removing chowkats with shutters (without taking off shutters from chowkat) not exceeding 1.50 Sqm each complete all as specified and directed. |
| 7 | Taking down and removing chowkats with shutters (without taking off shutters from chowkat) exc 1.50 Sqm but not exc 4.00 Sqm each complete all as specified and directed. . |
| 8 | Taking down shutter of any description exc 1 sqm and not exc 2 sqm each,complete all as specified and directed. |
| 9 | Taking down shutter of any description exc 2 sqm each, complete all as specified and directed. |
| 10 | Dismantling plain or corrugated steel sheets any gauge thickness including Nanital or similar pattern roof covering including ridges complete all as specified and directed. |
| 11 | Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 12 | Demolition of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 13 | Taking down steel water tubing 15 mm bore including all fitting and connections complete all as specified and directed. |
| 14 | Taking down steel water tubing 20 mm bore including all fitting and connections complete all as specified and directed. |
| 15 | Taking down Aluminium door shutter/ partition hung type/ sliding type / fixed, any size and re-fixing in same opening including making petty repairs as required like cleaning and repair/replacement of beadings, glazing clips, rubber gasket, stoppers, adjusting tower bolts, locks, hydraulic door closer, hinges etc. and make smooth functioning to entire satisfaction of Engr-in-charge, complete all as specified. |
| 16 | Dismantling timber in scantling 40 sqcm and over in section, unframed work complete all as specified and directed. |
| 17 | Dismantling timber fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, unframed work complete all as specified and directed. |
| 18 | Dismantling boarding, any description, fixed in any position with nails, complete all as specified. |
| 19 | Taking down roof trusses and , coupled raftersor trussed beams, above 8 metres and upto 12 metres clear span as specified all as directed by Engineer-In Charge. |
| 20 | Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out in hard/dense soil, complete all as specified and directed. |
| 21 | Removing excavated materials/ soils, not exceeding 50mtrs and depositing where directed at a level not exceeding 1.50mtrs, complete all as specified and directed. |
| 22 | PCC 1:4:8 (nominal mix) type D-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete complete all as specified and directed. |
| 23 | Precast rein-forced cement concrete as in landing, cover slabs (for manhole etc) and similar articles with precast cement concrete Type B-1, 1:2:4 (20mm graded crushed stone aggregate) and setting in cement mortar 1:4 , including necessary form work , complete all as directed. |
| 24 | Reinforced cement concrete , 1:2:4, nominal mix, type B-1, using 20mm graded crushed stone aggregate as in footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified. |
| 25 | Reinforced cement concrete , 1:2:4, nominal mix, type B-1, using 20mm graded crushed stone aggregate as in slab supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 26 | Providing precast cement concrete , 1:3:6, nominal mix, type C-1, using 20mm graded crushed stone aggregate as in window or doorcills, lintels, bressumers, steps, quoin blocks (foruse with masonry), string courses, copings.kneelers, apex stones, pier caps, columns, posts,boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), withplain fair faces, including chamfers, weatherings,throating etc. and setting in mortar complete withjoints to match including necessary form work, complete all as specified. |
| 27 | Hand packing (any thickness) of broken stone or boulders at back of walls over arches etc. and raising (or lowering) to the required level, complete all as specified. |
| 28 | Supply only 40mm graded crushed stone aggregate ( for weep hols), complete all as specified. |
| 29 | Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors, complete all as specified. |
| 30 | Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified. |
| 31 | Brick work with old size fly ash bricks, class 7.5, straight or curved on plan exc. 6 metre mean radius built in cement mortar 1:6 (01 cement : 06 coarse sand) all as specified & directed. |
| 32 | Walling of random rubble stone masonry,uncoarsed, well bonded, bedded and soilidly hearted, built in CM 1:6, complete all as specified and directed. |
| 33 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing as shown on page No 176 to 183 of MES SSR 2020 Part-II compete all as specified and directed. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) |
| 34 | 18mm thick lead free factory made, 100% solid WPC ( wood polymer composite) sheet for cup board/ kitchen cabinet shutters and frames having high natural fibre content 25 to 30 % wood coloured sheets having density not less than 500kg/ Cum and weight of sheet 11 Kg/ Sqm (+ 5 % ) manufactured by ISO 9001-2015 certified company , sheet should be 100% water proof , termite proof , fire retardant , manufactured by single layer extrusion process with excellent screw, fixed with screws to timbe/ steel frame work, fixed in repair complete all as specified. |
| 35 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails.M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Pane of 4 mm thick sheet glass to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ), and joined together with solvent cement, suppling & fixing in the frame at site, complete as shown on page No 176 to 183 of MES SSR 2020 Part-II compete all as specified and directed. |
| 36 | Powder coated (minimum thickness of powder coating 50 micron),Anodised aluminium window and ventilator shutters with frame , side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, one no aluminium hadle of suitable size for each shutter with 3mm thick sheet glass , anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 37 | Powder coated (minimum thickness of powder coating 50 micron),Anodised aluminium partitian with frame, side hung type without sash bars , aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, one no aluminium hadle of suitable size with 4mm ACP Board and 4mm thick sheet glass,anodised aluminium snap beading, screws, anodised aluminium fittings , complete all as specified and directed. |
| 38 | Powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium door shutters with frame , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, 4mm thick ACP board and 4mm thick sheet glass , one aluminium door stopper , hinges type B-21 , 100mm long ,anodised aluminum snap beading, anodised aluminium fitting , screws etc. complete all as specified |
| 39 | Extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed. |
| 40 | Extruded aluminium alloy handles, fabricated type, anodised of size 100 mm complete all as specified and directed. |
| 41 | Aluminium anodized barrel tower bolt of extruded section of size 150 mm and fixed complete all as specified and directed. |
| 42 | Mild steel butt hinges of size 75mm medium weight cold rolled complete all as specified and directed. |
| 43 | Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete, overall length of cover plate 140mm, complete all as specified and directed. |
| 44 | Galvanished mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanished wire staples complete all as specified and directed. |
| 45 | Sheet glass, 4mm thick ordinary quality and glazing with oil putty in squares n.exc 0.5 sqm each pane complete all as specified and directed. |
| 46 | 3mm thick, Figured glass, pinhead type in squares not exc 0.5 sqm in each pane, complete all as specified and directed. |
| 47 | Brass Mortice lock, vertical type, size 100 mm, $ levers, fixed in repair, complete all as specified. |
| 48 | Aluminium (extruded section) body ,door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg ,fixed in repair, complete all as specified and directed. |
| 49 | Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed,fixed in repair, complete all as specified and directed. |
| 50 | Continuous (piano) hinges,mild steel, bright finish or electrogalvanised, width of flap 30mm (when opened), complete all as specified. |
| 51 | 75mm size, Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 52 | Magentic catcher , fixed with screws to timber frame work, fixed in repar , complete all as specified and directed. |
| 53 | Stainless steel, Peg set of six, fixed/ welded/ soldered om stainles steel base plate of size 30mmx30mmx2.5mm,amd fixed stainless steel screws/ Rawl plugs , complete all as specified. |
| 54 | Door seal (Snake Guard) with powder coated aluminium frame work , suitable for 900 to 1000 mm door opening , fixed in repair, complete all as specified. |
| 55 | Mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed. |
| 56 | Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed. |
| 57 | Mild Steel work as in Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for largegates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 , complete all as specified and as directed. |
| 58 | Steel work in tubular hollow section trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.4923-1997, complete all as specified. |
| 59 | Rolled Mild Steel Work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410- W(Gde-E-250) quality- B, complete all as specified and as directed. |
| 60 | Rolled mild steel work as in Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc conforming to grade Fe 410 -W (Gde-E- 250) quality-A, complete all as specified and as directed. |
| 61 | Rolled mild steel work in Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc., conforming to Fe-410- W(Gde- E-250) quality- A, complete all as specified and as directed. |
| 62 | Framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars including cutting, drilling, welding etc confirming to Fe-290 Gde E-165 all as specified and directed. |
| 63 | Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified, all as specified and directed. |
| 64 | Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 65 | 0.8mm thick, Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified. |
| 66 | Clip-in false ceiling system with plain steel beveled edged tile (600mmx600mm) manufactured out of 0.70 mm aluminium sheet having power coating with 60 microns polyester paint on front side. Two sides of each tile shall be rised and piped and stopped to ensure positive engagement into the spring clip-in profile allowing for demounting of indivual tiles. The rigid suspension system consists of rows of galvanized steel 0.50 mm thick clip-in profile of size 38mm x 20 mm and installed at 600 mm c/c spacing to support the tiles clip-in profiles shall be suspended and jointed from galvanized steel ‘C’ channels of size 10mm x 38mm x 10mm with hold on clamps at spacing as specified by manufacture. Suspension angles shall be suspended from the roof structure by GI ceiling brackets as per manufacture instructions and jointed to the ‘C’ channels. The tiles shall be held in place by pressure clips ‘C’ at spacing as per manufactures instructions. GI wall angle shall be used on wall angle shall be used on wall of size 20mm x 30mm x 20mm and 0.5mm thick with matching the color with tiles all as per manufacture specifications/ instructions and including necessary scaffolding all as specified and directed by Engr-in-Charge |
| 67 | Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing , fixed in repair, complete all as specified. |
| 68 | 75mm thick PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregates) as in sub base complete all as specified and directed. . |
| 69 | Plain cement concrete 1:3:6, nominal mix, type C-1, using 20mm graded mechanically crushed stone aggregate, 75mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen and two parts of heated coarse sand (by volume), all as specified. Note:- The unit rate include for use of form work (straight or curved). |
| 70 | Vitrified ceramic tiles (Light shade) 10mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 Sqm as directed by EIC, as in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 71 | Vitrified ceramic tiles (light shade) 10mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 sqm as directed by EIC as in vertical surfaces , set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tile over and including 10 mm thick cement screed in cement mortar 1:4 complete , , all as specified and directed. Note:Size/Shade/Colour of tile shall be approved by the GE. |
| 72 | Mat finish, premium quality, joint free (edge cut), coloured/ printed ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement pointed in white or coloured cement to match including dismantling old tiles and rubbish off permises, all as specified and directed. Note:Size/Shade/Colour of tile shall be approved by the GE. |
| 73 | Mat finish, premium quality, joint free (edge cut), coloured/ printed ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 as in vertical surfaces , set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tile over and including 10 mm thick cement screed in cement mortar 1:3 including dismantling old tiles and rubbish off permises, all as specified and directed. Note:Size/Shade/Colour of tile shall be approved by the GE. |
| 74 | Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurryand pointed with white cement with admixture of pigment to match the shade of granite stoneincluding grinding and polishing complete over and including 20 mm thick cement screed in cement mortar 1:6, complete all as specified and directed. |
| 75 | Glazed ceramic coloured tiles of size 350x 250x 7 mm/ 450X 350X 7mm thick as in vertical surfaces , set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tile over and including 10 mm thick cement screed in cement mortar 1:3 including dismantling old tiles and rubbish off permises, all as specified and directed. Note:Size/Shade/Colour of tile shall be approved by the GE. |
| 76 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness& size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sandbedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size andpattern, finishing and sweeping extra sand; including demolition of existing tiles and removal outside MOD land , complete all as specified and directed. |
| 77 | Machine cut kota stone slab flooring 20-25 mm thick of size not less than 550 mm X 550 mm as per sample kept in GE’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, as in floor etc, laid over and including 15mm screed layer in cement mortar 1:6 including cutting, rubbing, grinding and polishing to achieve mirror finish complete, all as specified. |
| 78 | Machine cut kota stone 20-25 mm thick as per sample kept in GE’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab,as in in skirting, dados, risers to steps etc, laid over and including 10mm thick rendering in cement mortar 1:4 , cutting, rubbing, grinding and polishing to achieve mirror finish complete, all as specified.Note: Kota stone on treads and risers shall be fixed in one piece only. No joints shall be provided. |
| 79 | Rendering cement plaster 15mm thick in cement mortar 1:4 on fair faces of brick wall or on concrete surfaces, surface finished even and smooth without using extra cement, all as specified. |
| 80 | Rendering cement plaster 15 mm thick in cement mortar 1:6 (1 cement : 4coarse sand), on other than fair faces of brick wall or on stone masonry surfaces, trowelled to even and smooth finish without using extra cement complete all as specified. |
| 81 | Raised pointing to random or polygonal rubble, uncoursed or brought upto courses masonary in CM 1:4, complete all as specified. |
| 82 | Preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 83 | Preparation of new plastered surfaces or un plastered, previously undecorated wall surfaces and applying two coats of oil bound distemper , over 2mm thick wall care putty, complete all as specified and directed. |
| 84 | Preparation of old plastered surfaces or un plastered, previously undecorated wall surfaces and applying two coats of oil bound distemper , over 2mm thick wall care putty, complete all as specified and directed. |
| 85 | Preparation of new plastered surfaces or un plastered, previously undecorated wall surfaces and applying two coats of white wash , complete all as specified and directed. |
| 86 | Preparation of old plastered surfaces or un plastered, previously undecorated wall surfaces and applying two coats of white wash , complete all as specified and directed. |
| 87 | Preparation of old plastered surfaces or un plastered, previously undecorated ceiling surfaces and applying two coats of white wash , complete all as specified and directed. |
| 88 | Preparation of new plastered surfaces or un plastered, previously undecorated wall surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm, complete all as specified and directed. |
| 89 | Preparation of old plastered surfaces or un plastered, previously undecorated wall surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm, complete all as specified and directed. |
| 90 | Stop valve/ Angle valve, cast copper alloy, fancy type, chromium plated , with quarter turn flange, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore iron pipe or for unions fixed in repair complete all as specified. |
| 91 | Bib tap, long body, cast copper alloy ,chromium plated, fancy type , screwed for iron pipe or for brass ferrule of 15 mm bore, fixed in repair, complete all as specified and directed. |
| 92 | Brass Chromium Plated, centre hole mixer for mixing hot & cold water screwed down for iron pipe and fixed 15 mm bore,suitable for sink/WHB fixed in repair, complete all as specified and directed. |
| 93 | Brass Chromium Plated, centre hole basin mixer for WHB long single lever for mixing hot & cold water screwed down for iron pipe and fixed 15 mm bore, fixed in repair, complete all as specified and directed. |
| 94 | Sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed. |
| 95 | Brass chromium plated , tubular towel rail, 20mm dia, D type, 60cm long between flanges, fixed in repair complete all as specified. |
| 96 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position completein all respect , fixed in reapir as specified all as specified. |
| 97 | 32mm PVC waste pipe to WHB, sink, complete all as specified. |
| 98 | 600x450 mm bevelled edge mirror of slected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screwed and cup washers. |
| 99 | Soap dish, SS, approximate size 160x160x90mm, any type, fixed to plugs with chromium plated brass screws, fixed in repair complete all as specified. |
| 100 | PVC connections 15 mm size with PTMT nuts of length 450mm ,complete all as specified and directed. |
| 101 | 20mm bore, Ball brass valves, high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, fixed in repair, complete all as specified. |
| 102 | 32mm bore, Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, fixed in repair, complete all as specified. |
| 103 | Vitreous China wash down water closet (pedestal pattern), white including traps, connection to drain or outgoing pipe, flushing pipe, anti-syphonage pipe complete including fittings, PVC white seat cover and chromium plated jet including PVC connection, fixed complete including demolition of old unservicable WC and provision of plain cement concrete M-15, type B-I, using 20mm graded crushed stone aggregate, fixed in repairs all as specified. Make: Cat Part No. 2008 for EWC, 2308 for seat cover, 2201/B for internal fittings of 'Cera' or equivalent makes mentioned in PS. |
| 104 | Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580 mm x 440 mm, crystal white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete M-15, type B-I using 20 mm graded crushed stone aggregate complete all as specified, incl making connections to trap and to flush pipe, etc, fixed in repair all as specified. Make: Cat Part No. 2071 of 'Cera' or equivalent makes mentioned in Appx. |
| 105 | PVC valve less, snow white, syphonic action type flushing cistern 10 litre capacity, superior quality, plunger type, low level, with inlet, ball valve, float and handle, 32 mm dia PVC long bend flush pipe 90cm long and 15 mm dia 600 mm long PVC connection with CP brass coupling nuts and PVC washers at both ends fixed, in repairs, all as specified. Make: Cat Part No.B1010112 of Cera or equivalent in makes mentioned in Appx 'C'. |
| 106 | Wash basins, Vitreous China (Flat white type) size 550mmx400mm, crystal white with and including cutting for and pinning on ends of brackets, 450 mm long PVC connections 15mm size with PTMT coupling nuts at both ends, trap, grating and Union for discharge pipe, waste, chain and plug and porcelain stopper, waste pipe of polythylene of low or high density or PVC of 32mm dia including , 32mm dia waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed, screwed for iron pipe and fixed, complete all as specified. Make: Cat Part No. 1008 of Cera or equivalent in makes mentioned in Appx 'C' |
| 107 | Vitreous china urinal, half stall type,white with spreader, including fixing bolts, flush pipe, PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, capacity 7.0 litre, PVC waste pipe including providing and fixing plugs,including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe, complete all as specified and as directed. |
| 108 | Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantileverbrackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm, fixed in repair, complete all as specified. |
| 109 | G I tubing medium grade of 15 mm bore with all fittings and fixtures fixed to wall and ceiling or laid in floor/trenches, including cutting chases for conceated work where required , complete all as specified and directed. |
| 110 | Fixing only old GI tubing 15 mm bore pipe and connections in new or old position as fixed to wall and ceiling or laid in floor/trenches, including cutting chases for conceated work where required , complete all as specified and directed. |
| 111 | G I tubing medium grade of 20 mm bore with all fittings and fixtures fixed to wall and ceiling or laid in floor/trenches, including cutting chases for conceated work where required , complete all as specified and directed. |
| 112 | Fixing only old GI tubing 20 mm bore pipe and connections in new or old position as fixed to wall and ceiling or laid in floor/trenches, including cutting chases for conceated work where required , complete all as specified and directed. |
| 113 | 32mm bore, Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm, complete all as specified. |
| 114 | 110mm dia PVC(SWR) pipe single socketed with rubber ring joints, laid in trenches or in floor , fixed in repair, complete all as specified and directed. |
| 115 | 110mm dia PVC(SWR) pipe single socketed with rubber ring joints, fixed to wall , fixed in repair, complete all as specified and directed. |
| 116 | 75mm dia PVC(SWR) pipe single socketed with rubber ring joints, laid in trenches or in floor , fixed in repair, complete all as specified and directed. |
| 117 | 75 mm dia PVC(SWR) pipe single socketed with rubber ring joints, fixed to wall , fixed in repair, complete all as specified and directed. |
| 118 | 75 mm dia PVC(SWR) bend, any radius provided with oval access door complete all as specified and directed. complete all as specified and directed. |
| 119 | 110 mm dia PVC(SWR) bend, any radius provided with oval access door complete all as specified and directed. complete all as specified and directed. |
| 120 | 75mm dia PVC (SWR) junction single, (single T) equal or unequal provided with oval access door complete all as specified and directed. |
| 121 | 110mm dia PVC (SWR) junction single, (single T) equal or unequal provided with oval access door complete all as specified and directed. |
| 122 | PVC (SWR) floor trap, plain with grating including jointing with solvent cement for 75mm bore pipe, complete all as specified. |
| 123 | PVC (SWR) floor trap, plain with grating including jointing with solvent cement for 100/110mm bore pipe, complete all as specified. |
| 124 | Rotational moulded polyethylene water storage tank 1000 Ltrs capacity four layered (ISI Marked) cylinderical vertical with closed top, hoisted and fixed in position with ball brass valve, high pressure with PVC float valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line including dismantling old tank complete all as specified. |
| 125 | PVC Coated Mils steel conduit pipe , 25mm bore (Drapery rod) , with a pair of PVC Coated MS Clamps to hold drapery rod and decorative attachment at one or both ends of drapery rod , fixed to opening of door/ windows ( Each opening not exc 1.5 metre, containing a pair of clamps and a pair of side ornamental attachments) complete all as specified and directed. |
| 126 | Taking down point wiring with aluminium/ copper conductor for light point, socket point/ power point etc. in PVC casing and caping, surface pvc/ steel conduits, wood batten with clips including taking down board any type and size complete with any type of switches, sockets, holders, (batten or pendent type), ceiling rose etc. The light fittings (any type), main switches, distribution board with MCB’s of any capacity and make are to be removed/ replaced if required and all as specified and directed. NOTE: - Existing fan regulator any type (Where required) and electric meters are to be refixed and connected properly where required. |
| 127 | Taking down main switches, distribution board, steel enclosure with MCB's any way and rating including wooden board or from steel board and making good distubed surfaces complete all as specified and directed. |
| 128 | Taking down the sub main wiring of any size from the wall/roof/ceiling and removing from the site and making good disturbed surface complete all as specified and directed. |
| 129 | M&L for point wiring for one light/fan/call bell point controlled by one 5/6 Amp switch with 1.5 Sqmm two single core multistranded copper conductor FRLSH, PVC insulated (unsheathed) heavy duty cable 1100 volts including continuous earth wire of size 1.5 Sqmm copper conductor multistrand FRLSH, PVC insulated (unsheathed) drawn into concealed rigid non-metallic PVC conduit Medium Grade ISI marked not less than 20mm wide of 1.8mm wall thickness ISI marked including modular GI sunken flush box (Pressed steel powder coated Modular GI sunken flush boxese of any way i.e. 1 to 12 way as per site requirement suitable for modular switch/socket) for mounting switches, and including modular white cover plate with frame 1 to 12 way as per site requirement , way sockets, fan regulators etc & making good to disturbed surfaces as well as matching with existing whitewash colour/surface complete all as specified and as directed for the following:- (a) Wiring shall be done by using proper colour coding(b) Earth wire shall be of green colour(c) On RCC roof/ceiling PVC conduit shall be provided on surface with proper fixing clamps all as directed. |
| 130 | All as per serial item No '129' above, but for one 3 pin 5 Amps socket outlet, on same board all as specified and directed. |
| 131 | All as per serial item No '129' above, but for one 3 pin 5 Amps socket outlet, independent all as specified and directed. |
| 132 | All as per serial item No. '129' above but for 3 pin 15 Amps socket out let independent with 2.5 Sqmm PVC copper conductor cable and and PVC insulated, unsheathed 2.5 Sqmm stranded copper conductor cable as continuous earth wire, all as specified. |
| 133 | Modular switch 1 way 6A, 1 module complete all as specified and directed. |
| 134 | Modular socket, 6A-2/3 pin combined 2 module complete all as specified and directed. |
| 135 | Modular socket, 6A and 16A, 2/3 pin combined 2 module complete all as specified and directed. |
| 136 | Modular switch 1 way 16A, 1 module complete all as specified and directed. |
| 137 | Ceiling rose, 65 mm to 50 mm, two to three terminals, PVC/ Polycarbonate, insulated body fixed on PVC block, all as specified. |
| 138 | Lamp holder, PVC/Polycarbonate type with back plate suitable for angular/ batten fittings complete all as specified & directed. |
| 139 | Sub main wiring with two single core PVC insulated cable 1100 volts grade with copper stranded RLS conductor of size 6 Sqmm (2 single run) with one continuous FRLS copper earthing lead wire of size 6 Sqmm and drawn into PVC conduit/ casing & capping with all fittings/ accessories, junction boxes 1 to 4 way 20mm dia, cutting chases, making good in cement mortar (1:3), finishing surfaces to match with existing and connected to common earth dolly , complete and as directed. Note :- Two run (each run of 1 RM) of 6 sqmm copper conductor and one RM of earth wire of 6 Sqmm, shall be measured as one RM). |
| 140 | Sub main wiring with two single core PVC insulated cable 1100 volts grade with copper stranded RLS conductor of size 10 Sqmm (2 single run) with one continuous FRLS copper earthing lead wire of size 10 Sqmm and drawn into PVC conduit/ casing & capping with all fittings/ accessories, junction boxes 1 to 4 way 20mm dia, cutting chases, making good in cement mortar (1:3), finishing surfaces to match with existing and connected to common earth dolly , complete and as directed. Note :- Two run (each run of 1 RM) of 10 Sqmm copper conductor and one RM of earth wire of 10 Sqmm, shall be measured as one RM). |
| 141 | MCB TPN 63 Amp, 415 Volts, 10 KA, B Curve all as specified. |
| 142 | MCB TPN 100 Amp, 415 Volts, 10 KA, B Curve all as specified. |
| 143 | MCB SPN 40-63 Amp, 240 Volts, 10 KA, B Curve all as specified. |
| 144 | MCB SP 6 to 32 Amp, 240 Volts, 10 KA , B Curve all as specified. |
| 145 | MCCB 4 Pole, 415 Volts, Adjustable and fixed magentic settings type, 250 Amps with breaking capacity 36 KA, complete all as specified. |
| 146 | MCCB 4 Pole, 415 Volts, Adjustable and fixed magentic settings type, 6350 Amps with breaking capacity 16 KA, complete all as specified. |
| 147 | Sheet metal enclosures for DBs when MCBs to be used, single pole and neutral, 12 way, double door, 240 volts with 200 Amp rated bus bar completed all as specified. |
| 148 | Sheet metal enclousers, TPN Distribution board 4 way 415 V, double door complete with copper bus bar and neutral link earthing fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Note:- Distribution board and MCB's should be same make. |
| 149 | LED Luminaire 600mmx600mm, 36 watt, 6500K, Ultra modern recess mounting luminaire with high performance LEDs, suitable for mounting withArmstrong/Grid ceiling, complete all as specifiedMake: Havells cat part No. LHEBAEP7IW1W036 or equivalent in Appx |
| 150 | 80 Watt LED Flood Light, High performance floodlight luminaire with pressure die-cast housing,toughened glass and secondary lens optics with IP66 ingress protection. Efficacy 140 lm/W., complete with accessories internally prewired and with suitable fixing arrangement for mounting on existing MS frame bracket and making connection complete , including taking down existing light fitting complete all as specifiedMake: Bajaj cat part No. PRAZE F 112L WH NB-A5 TG SD or equivalent in Appx |
| 151 | Disconnecting/ Taking down Ceiling fan, keeping in safe custody and refixing and making the conection and testing complete all as specified and directed. |
| 152 | Disconnecting/ Taking down geyser any capacity , keeping in safe custody and refixing and making the conection and testing complete all as specified and directed. |
| 153 | Disconnecting OT ( Operation Theater ) Light, handing over to user for safe custody, and refixing and making the conection and testing complete all as specified and directed. |
| 154 | GI pipe light grade of size 50 mm dia laid in trenches/ walls including clamps, screws etc, complete all as specified and directed. |
| 155 | XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with multi-standard aluminium conductor, 1100 volts grade, cross sectional area 50 Sqmm, 3.5 core, laid in trenches or passing through pipes, including making necessary connections at both ends, including taking out old cable complete all as specified and directed. |
| 156 | Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of plate not less than 1.5 metre below ground level, connecting to galvanised iron strip 32X6 mm size (as earth lead strip), by means of bolt, nuts, check nuts and washer of galvanised and earth wire protected by provision of galvanised iron pipe light grade, 40 mm bore including provn of concrete pit in plain cement concrete M-15 type B-1 using 20mm graded crushed stone aggregates with 40mm thick cover of rainforced cement concrete M-15 reinforced with XPM (weight not less than 4 kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia mild steel bar handle made to shape, galvanised iron medium grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorous bronze with fixing arrangement, funnel, wire mesh and including earth work in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metre, all as per electrical plate No. 3 of SSR 2009 Part-I and connection to earth test point all as specified and testing on completion. |
| 157 | Deduct Credit Amount as per Schedule of credit as details given on Srl Page No 32 of tender doucments. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
