|
| 1 | S&F High performance component brushable elastomeric polyurea waterproofing coating cold applied with brush/roller smartcare damp proof xtreme / Weather pro top shield elastromeric/ ultraseal BA or approved equivalent on any horizontal or vertical surface liquid membrane with white in color with an elongation of Min 200% vertical & Min 300% horizontal surfaces and tensile strength of 1.5 N/mm2 @DFT 1mm as per ASTM D 2370, Min 55 % Solid Content, shore A Hardness of min 70, system includes final base preparation using polymer primer/ Epoxy application @ 200-250gms/sqm, depending upon the surface porosity and crack bridging ability 3.50mm horizontal & 1.2mm vertical applying Smart care Damp proof xtreme / Home Shield Ultraseal BA or approved equivalent in two coats at not less than 0.93Sqm/ltr in horizontal & 2.79-3.25Sqm/ltr in vertical surfaces, complete as per Manufacturer specifications. Make : Asian paints or equivalent |
| 2 | M&L for 25mm thick PCC 1:2:4 type B0 using 12.50mm grades crushed stone aggregate as in padding on roof finished even and smooth using extra cement complete all as specified and directed. |
| 3 | M&L for roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust and brushing neat cement sulurry with 3.0kg of cement per sqm etc as directed. |
| 4 | Supply only liquid water proofing liquid complete all as specified and directed . |
| 5 | M&L 15mm thick plastering in CM 1:4 on brick surface or concrete surface as on external surfaces in two layers, surface finished even and smooth without using extra cement including mixing of WPC including taking down cement plaster of any description and any thickness including manglore pattern tiles on brick/stone/concrete surface complete all as specified and directed. (Note- Integral water proofing compound shall be measured and paid seprately) |
| 6 | M & L rendering 10 mm thick in CM 1:6 on fair face of brick work or conctrete surface of brick masonry, finished even and smooth without using extra cement including taking down cement plaster of any description and any thickness including gritt finish as directed. |
| 7 | M&L for preparation of new plastered surfaces of wall and applying two coats of Distemper Oil Emulsion over 2 mm thick wall care putty to prepare the surface even and smooth all as specified and as directed. |
| 8 | M&L for preparation of old plastered surfaces of wall by complete removal of existintg treatment and applying two coats of Distemper Oil Emulsion over 2 mm thick wall care putty to prepare the surface even and smooth all as specified and as directed. |
| 9 | M&L for preparation of old plastered surfaces of wall applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces over two coat of wall putty all as specifed and as directed. |
| 10 | M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block M-40 grade with approved colour , design and pattern as in footpath, parks, lowns, drive way or light traffic parking etc, of required strength, thickness and & size/shape , made by table vibratory method using PU mould, laid in require colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand including demolition of existing tiles and removal outside the MoD land complete all as specified and directed. |
| 11 | M&L 75 mm thick cement concrete in foundation filling and mass concrete type D2 1:4:8 (using 40mm graded crushed stone aggregate) complete all as specified and directed . |
| 12 | M&L colour chequered cement concrete tiles, machine pressed, factory made of size 300x300x25mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry, laid in floors, ever and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 13 | M&L 75mm thick PCC 1:3:6, type C-2 (Using 20mm graded crushed stone aggregate) as in plinth protection etc and finished even and smooth without using extra cement, complete all as specified and directed. |
| 14 | Demolition of cement concrete (unreinforced) of any description and in any postion not otherwise specifically provided all as specified and directed |
| 15 | M&L for cement concrete type B-1 1:2:4 (20mm graded crushed stone aggregate) as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings etc, complete all as specified and directed. |
| 16 | M&L Granite of any type tiles 15 to 20mm thick laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand) machine cut bedded and jointed with grey cement slurry and pointed with cement with admixture of pigment to match the shade of granite stone including grinding and polishing & Demolition of stone slab and tiles of any description or thickness in floors, aprons etc Laid, bedded complete all as specified and directed . |
| 17 | M&L machine cut kota stone slab flooring 18-20mm thick laid over and including 15 mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing incl Demolition complete all as specified and directed . |
| 18 | M&L machine cut kota stone slab 18-20mm thick in riser of steps,skirting,dado and pillar laid over and including 15 mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand) jointed including 10mm screed plaster in CM 1:4 complete all as specified and directed . |
| 19 | M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius, built in CM (1:6), any description of roof including demolition of brickwork or stone boulder masonry built in cement or cement mortar complete all as specified and directed . |
| 20 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed . |
| 21 | M&L for cement concrete (1:2:4) type B1 as in cover slabs, floor slabs, chajja and other similar work all as specified and directed. |
| 22 | S&F mild steel TMT bars 500 D, 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.9mm dia for TMT bars all as specified and directed. |
| 23 | M&L for Vitrified Ceramic tiles 10mm thick light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floots etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 including dismantling complete all as directed. |
| 24 | M&L for wall glazed tile coloured of size 300x450x8mm/1200X600X8mm thick as in vertical surface such as jointed in neat cement slurry and pointed with white/grey cement to match and including 10mm thick plastering in cement mortar 1:4 (1cement : 4 coarse sand) or fixing with epoxy grout & fixing chemical if required including dismentling complete all as directed. Colour, size and pattern to be approved by GE. |
| 25 | M&L Non-skid, Ceramic tiles coloured 7 to 8mm thick area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement: 6 coarse sand) complete including dismentling all as directed colour, size and pattern to be approved by GE. |
| 26 | M&L for 25mm thick PCC 1:2:4 type B-2(using 12.50mm grades crushed stone aggregate) and finished even as in floor in subbase, complete all as specified and directed. |
| 27 | Taking down chowkats or frame with shutters (without taking of shutters from the frame) n. exc. 1.5 sqm each complete all as specified and directed. |
| 28 | Taking down chowkats or frame with shutters (without taking of shutters from frame) exc. 1.5 sqm and n. exc. 4.0 sqm each complete all as specified and directed. |
| 29 | S&F in Powder coated anodised aluminium frame/chowkhat for doors, windows, ventilators with minimum thickness of powder coating 50 micron with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 30 | S&F powder coated Anodised aluminium door shutters (powder coating of any colour and thickness not less than 50 micron) aluminium section weighting 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprane packing two numbers of aluminium handle 150mm long for each shutter, one aluminium door stopper, hinges type B-21, 100mm long, anodised aluminium snap beading, screws, anaodised aluminium fittings complete all as specified and directed. |
| 31 | S&F powder coated Anodised aluminium window and ventilator shutters (powder coating of any colour and thickness not less than 50 micron) side hung type with sash bars, aluminium section weighting 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprane packing one number of aluminium handle of suitable size for each shutter, one peg stays 150mm long, 02 numbers hinges type B-21, 100mm long, anodised aluminium snap beading, screws, anaodised aluminium fittings complete all as specified and directed. |
| 32 | S&F door closer hydraulically regulated, Aluminium (extruded section) designation No. 3 universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg fixed complete all as specified and directed. |
| 33 | S&F 4mm thick sheet glass ordinary quality, exceeding 0.50 sqm in each pane fixed with rubber gasket and aluminium powder coated snap beading etc. including hacking out old broken glass from wood or steel frame or frame of any discription complete all as specified and directed. |
| 34 | S&F 3mm thick figured glass, pin head type and glazing with oil putty in squeres not exceeding 0.50 sqm each pane including hacking out old broken glass from wood or steel frame or frame of any discription complete all as specified and directed. |
| 35 | S&F Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. and providing one shop coat of primer, complete all as specified and directed. |
| 36 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of k value 58-60 (Suspension Grade) calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/cum and screw withdrawal strength of 1800 N (face) & 900N (edge), minimum compressive strength 50n/mm squre modulus of elasticity 850 N/mm squre and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhessive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screw all as per direction. |
| 37 | S & F Powder coated aluminium (minimum thickness of powder coating 50 microns) partitions with slider frame of two/three numbers, allowing parallel tracks within the sliding frame with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make confirming to IS : 733 and IS:1285, fixing with dash fasteners of required dia and size , including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium section shall smooth , rust free, straight, mitred and jointed mechanically wherever required including cleats angle. Aluminium snap beading for glazing/paneling, CP brass/ stainless steels , screws. , complete all as specified. (Note:- Glass to be fixed in sliding panel paid seperately) |
| 38 | S&F 12mm thick toughned glass as in hinged doors, partitions, automatic doors and similar work including cutting to shape, drilling holes required, complete all as specified and directed. |
| 39 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified & directed. |
| 40 | S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying and fixing in opening as per specifications & directed. |
| 41 | S&F 100 mm size butt hinges, medium weight cold rolled mild steel complete all as specified and directed. |
| 42 | S&F 150 mm size (length of bolt) aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed. |
| 43 | S&F 150 mm size extruded aluminium alloy handle, fabricated type anodised complete all as specified and directed. |
| 44 | S&F 300 mm size (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 45 | S&F in repairs 18/19 mm thick lead free factory made, 100% solid WPC (Wood polymer composite) sheet for cupboard/kitchen cabinet shutters and frames having high natural fibre content 25 to 30% wood colour sheets ith density not less than 500 kg/cum and the weight of sheet of 1 Sqm should be 11 Kg (+/-5%)nmanufactured by ISO 9001 2015 certified company the sheet should be 100% water proof, termite proof, fire retardant, manufactured by single layer extrusion process with excellent screw, fixed with screws to timber/ steel frame work complete as directed. |
| 46 | S&F Auto closing hinges 35mm of 0 degree crank (KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and directed. |
| 47 | S&F stainless steel handles 100mm size for kitchen cabinet shutters complete all as specified and directed. |
| 48 | S&F chromium plated stainless steel wire basket (storage basket) pull out type for large utensils size 480x500x150mm of Grade 304 with necessary fixing clips etc complete all as specified and directed. |
| 49 | S&F chromium plated stainless steel wire basket (cup and saucer basket) pull out type for large utensils size 380x500x100mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed. |
| 50 | S&F chromium plated stainless steel wire basket (plate basket) pull out type for large utensils size 380x500x100mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed. |
| 51 | S&F chromium plated stainless steel wire basket (cutlery basket) pull out type for large utensils size 380x500x100mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed. |
| 52 | S&F in repairs door seal (Snake guard) with aluminium frame powder coated upto 900 to 1000mm door opening complete all as specified |
| 53 | S&F 1700mm x 900mm/1200mm x 600mm bevelled edge mirror of selected size and selected quality glass mounted on 6mm thick AC building board of commercial plywood decorative type with frame or frameless body and fixed to according plug with chromium plated brass screws and cup washers complete all as specified size to be approved by GE |
| 54 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern) One piece cistern white with 'P/S' trap connected to drain or out going pipe and flushing pipe complete including PVC sheet cover closed recessed type with flat bottom, and covered with mild steel chromium plated or aluminium hinging device complete all as specified and directed. Make;- Jaquar or equivalant. |
| 55 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white/coloured as approved (excluding fixing bolts, flushing cistern and flush pipe) including seat and cover for pedestal pan complete all as specified and directed by Engineer-in-charge. |
| 56 | S&F as in repair CP jet spray hygenic spray jet for 15mm bore dia fittings 1 to 1.5m long tube acrylic type complete all as specified and directed. |
| 57 | S&F in repairs 10 litres capacity PVC, low level, valveless, syphonic action type flushing cistern, white/coloured as approved inlet ball valve, handle and arrangment 32mm dia PVC flushing pipe and 15mm dia 450mm long PVC connection with PTMT coupling nuts and PVC washer at both ends, complete all as specified and directed. |
| 58 | S&F fixed in repair for vitreous china wash basin, white oval type size 550 x420mm excluding tap, waste chain and plug and pocelain stopper but including bracket, cutting for and pinning in ends of brackets or erecting stand including waste pipe complete all as specified and directed. |
| 59 | S&F in repairs vitreous china urinals, half stall type white of size 400x590mm with integrated CP spreader including bottle trap and fitting complete all as directed. Make - Jaquar or Equivalent |
| 60 | S&F in repairs 8mm thick frosted glass type urinal partition white of size 900x450mm complete all as specified and directed. Make:- Jaquar or equivalent |
| 61 | S&F fixed in repairs vitreous china wash basin, white oval type cental top size 550 x420mm excluding taps, including bottle traps and fittings complete all as specified and directed. |
| 62 | S&F in repair CP swan neck type pillar taps fancy type 15mm bore cast alloy with capasten head screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts screwed complete all as specified and directed. |
| 63 | S&F in repair steel water tubing, 15 mm bore dia, galvanised , \\"medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work etc, complete all as specified and directed. |
| 64 | S&F in repair steel water tubing, 20 mm bore dia, galvanised , \\"medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work etc, complete all as specified and directed. |
| 65 | S&F in repair chromium plated toilet paper holder premium quality complete all as specified and directed. |
| 66 | S&F in repair soap dish any type fixed to plugs with chromium plated brass screws premium quality complete all as specified and directed. |
| 67 | S&F in repairs 15mm bore angle valves, CP fancy type (ISI marked) two way screwed down, high pressure with carutch or butterfly handle, screwed both ends (externally threaded) complete all as specified and directed by EIC. |
| 68 | S&F in repairs concealed type with wall flange, stop valves 15mm bore , cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 69 | S&F in repair bib taps 15mm bore, fancy type cromium plated with butterfly handle, screwed down, high pressure, with carutch or butterfly handle, screwed both ends for iron pipe or for unions.including wall flange complete all as specified and directed. |
| 70 | S&F in repairs brass chromium plated mixture for mixing hot and cold water for Bath/WHB, screwed down for iron pipe for 15mm dia bore pipe, complete all as specified and directed by Engineer-in-charge. |
| 71 | S&F in repairs brass chromium plated shower rose 125mm/200mm/250mm size fancy type premium quality round or square shaped with long body with swivel joints including fixing to steel pipe or union complete all as specified and directed. |
| 72 | S&F Brass Chromium plated WHB/Sink mixture for mixing hot and cold water for WHB/ sink, screwed down for iron pipe for 15mm dia bore pipe, complete all as specified and directed. |
| 73 | S&F in repair sheet glass shelf assembly consisting of 50mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 74 | S&F in repairs brass chromium finished SS material tubular towel rail 600mm long dual towel shelf complete all as specified and directed. Make - Jaquar |
| 75 | S&F kitchen sink double bowl made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets as required and connecting union to & size of each bowl 410mm x 330mm x 160mm complete all as directed. |
| 76 | S&F kitchen rack of stainless steel 1520x610x865mm with minimum 3 tier workbench with 2 overhead shelevs steel complete all as specified and directed. Pattern/ design to be approved by GE. |
| 77 | S&F In repair PVC connection 15mm size, 450 mm long with PTMT nuts washers complete all as specified and directed. |
| 78 | S&F waste pipe of polyethylene of low or high density of PVC, 32mm dia, complete all as specified and directed. |
| 79 | Dismantling of CI/PVC pipe 75/100mm bore fixed to wall or laid in floors or trenches including connection all as specified and directed. |
| 80 | S&F PVC (SWR) pipe 75mm bore dia, single socketed, in any length with rubber ring joints fixed to walls etc, complete all as specified and directed. |
| 81 | S&F PVC (SWR) pipe 75mm bore dia, single socketed, in any length with rubber ring joints laid in trenches or in floors etc, complete all as specified and directed. |
| 82 | S&F PVC (SWR) pipe 110mm bore dia single socketed, in any length with rubber ring joints fixed to walls etc, complete all as specified and directed. |
| 83 | S&F PVC (SWR) pipe 110mm bore dia, single socketed, in any length with rubber ring joints fixed to laid in trenches or in floors etc, complete all as specified and directed. |
| 84 | S&F 75mm bore PVC bends (SWR) |
| 85 | S&F 75mm bore PVC (SWR) T- Junction with ovel acces door |
| 86 | S&F 110mm bore PVC bends (SWR) |
| 87 | S&F 110mm bore PVC (SWR) single,(single T) Junction with ovel acces door |
| 88 | S&F CP grating 100mm dia of PTMT (minimum weight 25 gms), specified all as directed. |
| 89 | S&F CP (SWR) floor trap, plain of 75mm dia with grating including jointing with solvent cement |
| 90 | S&F PVC (SWR) vent cowl 110mm dia |
| 91 | M&L PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified and directed. |
| 92 | M&L preparation of steel and iron surfaces of any description not otherwise descibed over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 93 | S&F 1000 Ltrs capacity rotational moulded polyethylene water storage tank (Cylinderical vertical with closed top) hoisted and fixed in position including tank nipple, with washers all as specified and directed. |
| 94 | S&F 20mm dia gun metal, glove or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 95 | M&L Preparing wood surface for varnishing incl and cleaning and stoping and applying one coat of liquid transparent wood filler and finishing with a varnish coat complete all as specified and as directed. |
| 96 | S&F in repairs 25mm drappery rod Stainless Steel fancy/ designer pattern incl brackets Complete all as specified and as directed. |
| 97 | Dismantling wrought iron or mild steel work of any discription not otherwise provided for complete all as specified and directed. |
| 98 | S&F compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. Built up from 2 or more beam or channel sections or angles with plates, including all lattice bars, stiffiners, gusset plates etc. Fe-410W(Gde-E-250) quality-B complete all as specified and directed. |
| 99 | M&L PCC 1:3:6, type C-2 (Using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete for filling MS angle post complete all as specified and directed. |
| 100 | S&F in repair for hollow PVC wall panelling soper heavy quality minimum 5mm thick, printed PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 101 | S & F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engineer-in-Charge.(Make : Cera or Equivalant |
| 102 | Surface excavation (not exceed) 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed. |
| 103 | M&L 100mm thick hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to true surface completed all as specified and ditected. |
| 104 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed . |
| 105 | PCC 1:4:8(nominal mix) type D-2 (using 40 mm graded crushed stone aggregate), as in fdn filling and mass concrete, complete all as specified and directed. |
| 106 | M&L 40mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate as in plinth protection/flooring finished even and smooth without using extra cement complete all as specified. |
| 107 | M&L Brickwork with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified. |
| 108 | M &L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick/concrete surface and finished even and smooth with out suing extra cement mixed with WPC @3% by wright of cement (External surface) WPC shall be measured and paid seprately complete all as specified directed. |
| 109 | M&L preparing of new plastered wall surface and applying two coat white wash on newly plastered surfaces complete all as specified directed. |
| 110 | Excavating in post holes in soft/loose soil (or similar holes) each n exc. .5 cum gettingh out returning, filling in land eamming earth or broken rubble mixed with earth around in layers not exceeding 25cm watering and removing surplus soil to distance n exc 50m and making good surface complete all as specified directed. |
| 111 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified, compete all as specified and directed by Engineer-in-charge |
| 112 | S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tube confirming to I.S. 1161-1979 grade St.-240 complete all as specified and directed by Engineer-in-charge. |
| 113 | S&F rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe-410-W Gde E-250) quality complete all as specified and directed by Engineer-in-charge. |
| 114 | Returning filling inclding spreding leveling watering and well ramming in layout n. exc. 25cm in any type of soil complete all as specified and directed. |
| 115 | Removing excavated material n. exc.50mtr and depositing where directed at a level n. exc. 1.5m above the starting point all as specified and directed. |
| 116 | M&L for 50mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in plinth protection/flooring finished even and smooth without using extra cement, complete all as specified and directed. |
| 117 | M&L for providing and laying 80mm thick factory made chamfereg edge cement concrete paver block M-30 grade with approved colour , design and pattern as in footpath, parks, lowns, drive way or light traffic parking etc, of required strength, thickness and & size/shape , made by table vibratory method using PU mould, laid in require colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding / laying in inteer locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand including demolition of existing tiles and removal outside the MoD land complete all as specified and directed. |
| 118 | Taking down old unsv copper/aluminium point wiring concealed/batten (light, fan, socket or power point) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting and any type switch board wooden/iron, round block etc removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition conditions separately) and making good the disturbed surfaces of walls, floors, etc complete all as specified and directed. |
| 119 | Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc, complete all as specified and directed. |
| 120 | Taking down un-servicable submain wiring of any size and any type from wall ceiling etc. complete all as specified and directed. Please Enable Macros to View BoQ information |
| 121 | Taking down un-servicable submain wiring of any size and any type from wall ceiling etc. complete all as specified and directed. Please Enable Macros to View BoQ information |
