|
| 1 | Taking down cement plaster on brick wall or concrete surface etc including raking out joints hacking for key scrubbing down with water etc complete all as directed. |
| 2 | M&L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:6) on wall finishing the surfaces even and smooth without using extra cement.all as specified & directed. |
| 3 | M&L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:4) with using WPC (WPC shall be measured seperetly)on wall finishing the surfaces even and smooth without using extra cement.all as specified & directed |
| 4 | M&L for 10 mm thick cement plaster in cement mortar 1:3 for ceiling, finished even & smooth without using extra cement complete all as specified and directed. |
| 5 | M&L for preparing newly platered surfaces and applying two coat of distemper oil emulsion white or tinted over priming plastered or other surface with alkalli-resistant priming paint over 1mm thick wall care putty on ceiling complete all as specified and directed |
| 6 | Complete removal of existing treatment and applying two coats of distemper oil emulsion white or tinted over priming plastered or other surface with alkalli-resistant priming paint over 1mm thick wall care putty on ceiling complete all as specified and directed |
| 7 | M&L for preparing newly platered surfaces and applying two coat of distemper oil emulsion white or tinted over priming plastered or other surface with alkalli-resistant priming paint over 1mm thick wall care putty on walls complete all as specified and directed |
| 8 | Complete removal of existing treatment and applying two coats of distemper oil emulsion white or tinted over priming plastered or other surface with alkalli-resistant priming paint over 1mm thick wall care putty on walls complete o all as specified and directed |
| 9 | M&L for preparing the new plastered surfaces and applying two coats of exterior Emulsion weather proof coat white or tinted on walls/soffit of chajja surfaces complete all as specified directed. |
| 10 | Complete removal of existing treatment and applying two coats of exterior Emulsion weather proof coat white or tinted on walls/soffit of chajja surfaces complete all as specified directed. |
| 11 | Supply only integral water proofing compound. ISI Marked |
| 12 | Taking down chowkhats or frame n.exc 1.50 Sqm each with shutter without taking of shutter from framed complete incl removing from site |
| 13 | Taking down chowkhats or frame exc 1.50 Sqm but n.exc 4.00 Sqm each with shutter without taking of shutter from framed complete incl removing from site |
| 14 | Resecuring or easing and adjusting without taking down shutter of any description exc 1 sqm and n exc 2 sqm each complete all as specified. |
| 15 | M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directe incuding necessary formwork required complete all as specified and as directed by EIC. |
| 16 | M&L for Pressed steel frames for doors (105X60MM) with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 17 | M&L for cement concrete type C-0,1:3:6 (12.50 mm graded crushed stone aggregate) as in coping, bed block , water trought and similar works including rounding, chamfered and throting complete all as specified and directed. |
| 18 | S&F flush shutter (35mm thick), solid core construction, with block board core and plywood face panels, commercial type on both sides and fitted to chowkats complete all as specified and directed. complete all as specified and directed. |
| 19 | Framed work such as grills, grating doors or gates etc. of angle iron, flat iron with ends of bars shouldered and or rivetted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings for terrace, framework of water tanks and similar work confirming to Fe 290. |
| 20 | S & F powder coated anodised alm ventilator louvre type with two separate frame of size 50.5mmx40mmx1.5mm thick (01x frame for fixing of 5mm thick coloured glass & 01x frame for fixing SS wire mesh) powder coated anodised aluminium section weighing 0.55 kg/m including 5mm thick coloured glass, SS wire mesh and necessary joining cleats, glazing clips, rubber packing, side handles fixed to wall with fastener etc, complete all as specified & directed. |
| 21 | S&F powder coated Aluminium three track sliding glazed window manufactured with approved aluminium section with three sliding shutters each shutter width one half of the length of window with the following specifiecation and making good the adjascent surfaces :-(a) Window frame of cross section 101mmx40mmx1.5mm thick.(b) Three way track for smooth slding shutters of cross sections 91.80mmx31.75mmx1.1mm thick. (c) Sliding shutter frame of cross section 40x18x1mm.(d) Aluminium glazing stip of size 18.2x16.66mm. (e) 4mm thick flat glass superior quality for two shutter. (f) IDPE rubber gasket for fixing glass. (g) Locking cleat/device as shutter 01 Nos. (h) 02 Nos sliding roller per shutters. (j) aluminium wire cloth 0.36mm stainless steel nominal dia of wire and average width of aperature 1.40mm for one shutter.(k) Fixing screws for frame with wall 06 per window with fancy design.(Note: Window will be measured outer to outer frame and no extra to be paid. |
| 22 | M&L for powder coated alumunium chowkhat of size 0.6mmx44.5mmx1.5mm thick in section fixed to walls and alumunium frame with coloured anodised alumunium screws complete all as specified and directed by Engr-in-Charge. |
| 23 | S&F coloured powder coated alumunium three track sliding glazed door shutter with four panel made of vertical style of size 85x44.5x1.5mm and Top rail size 114.30x44.5mmx1.5mm bottom rail 150mmx44.5mmx1.5mm and middle rail 114.3mmx44.5mmx1.5mm all alumunium section including all fittings as per door shutter such as alumunium door handles round type-2 Nos ,stainless steel hinge 100mm size -4Nos,central mortice lock ,alumunium tower bolts 300mm-2 Nos double leg alumunium anodised door stopper and hydraullic door closer ,designation No 2, universal type ,cast iron body ISI marked and necessary clips rubber packing and alumunium beading to receive and including 5.5mm thick plain tined glass or 6mm thcik alumunium composite panel in top and bottom panel. complete all as specified and as directed by Engr-in-Charge. |
| 24 | Supply & Fixing 5 mm thick figured glass, pin head type and glazing with oil putty in squre and fixed inside aluminium frame exc 0.5 Sqm in each pane all as specified and directed. |
| 25 | S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube S&F in opening all as shown on drawing and specified. |
| 26 | S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed to gather with solvent cement supplying and fixing in the frame at site as per specification and drawing incl 3 Nos but hings 100 mm long for each door |
| 27 | S&F in Repair prelaminated particle board 18-19 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination in cupboard incl frame complete all as specified and directed. |
| 28 | M&L for 30mm width of flap MS piano hinges complete as directed at site |
| 29 | S&F 100 mm Hasp and stable, mild steel, wire type stove enamelled black, including bolt to hinge plate and fixed with screws all as specified and directed. |
| 30 | S & F in reapirs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 31 | S&F butt hinges 100mm long medium weight cold rolled MS and fixed complete all as directed at site |
| 32 | S&F 150 mm long aluminum anodized barrel tower bolt extruded section. |
| 33 | S&F aluminum handles cast type anodize 150 mm long. |
| 34 | S&F aluminium alloy anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alumionium alloy and fixed 300mm long. all as specified |
| 35 | M&L for preparetion of new steel surfaces and applying two coats of synthetic enamel paints over a coat of primar with red oxide on new steel surfaces over 10cm width or girth |
| 36 | M&L for applying two coat of synthetic enamelled paint over one coat of pink primer on new wooden surfaces of any description not otherwise described over 10cm width or girth including preparation of new surface all as specified and directed |
| 37 | M&L for applying one coat of synthetic enamel paint on old painted wooden surfaces of any description not otherwise described over 10cm width or girth including preparation of surface all as specified and directed |
| 38 | Demolition of plain cement concrete in ground floor and paving not exceeding 15cm thickness below or above ground level including removal of same to exceeding 1 Km but not exceeding 1.5 Km complete all as directed. |
| 39 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete. |
| 40 | S&F for glazed ceramic tiles coloured of size 350x250x7mm/450x300x7mm thick fixed in verticle surfaces, set and jointed in neat cement slurry and pointed in white and colour cement to match incl 10mm thick screed bed in CM 1:4 all as directed. |
| 41 | M&L for coloured non skid cermic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.18 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6 all as directed. |
| 42 | M&L for double charged vitrified tiles 600x600mm, glossy finish (light shade 10 mm thick (square / rectangular ) polish,as in floor etc set and jointed, joint free and pointed in white or coloured cement to match incl 20 mm thick screed bed in CM 1:6 on concrete surface rough finish to recive tiles of approved shade & colour complete all as specified and directed. |
| 43 | All as per Item No 42 above but skirting/dado incl 10mm thick rendering in cement mortar 1:4 finished rough to recive tiles all as specified and directed. |
| 44 | M & L for 25mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in flooring finished even and fair. |
| 45 | M & L for brick work with fly ash modular bricks straight or curved on plan exc 6m mean radius built in CM 1:6 including Demolition of brick/stone work built in cement mortar including all quoins, arches, pillar including coping etc., all as directed.. |
| 46 | M&L for 75 mm thick PCC 1:3:6 Type C-2 using 20mm graded aggregate as in plinth protection etc, laid to slope of 1:12 and shall be laid in alternate bays n.exc 1.5 m in length, joints 20mm wide will be provided every 1.5m and filled with ceiling compound grade ‘A’ the joints between external wall and plinth protection shall also be laid with ceiling compound grade ’A’, finished cement concrete surface even and smooth all as specified. |
| 47 | M&L for 100 mm thick PCC 1:4:8 Type D-2 using 40mm graded stone aggregate as in sub base all as specified and directed. |
| 48 | M&L coloured glazed chequered cement concrete tiles with grey cement and no pigment 30cmx30cmx25mm thick over 15mm thick screed bed in CM 1:6 set jointed and pointed in neat cement slurry in floors complete all as specified and as directed by Engr-in-Charge. |
| 49 | M&L for repair and rendering 10mm thick in CM 1:3 on chajjas not exceeding 60cm width after removing cracked plaster and concrete including cleaning of viisible reinforcement and treating with cement slurry also necessary repair to cracked concrete if any with cement concrete 1:2:4 Type B-0 using 12.5mm graded aggregate including necessary scafolding work for double/single storey bldgs all as directed. |
| 50 | S&F in repairs Stainless Steel pipe (chromium plated) 50mm dia,1.50mm thick for railing/staircase fixed wall/floor with sutaible screw and PCC 1:2:4 type BO using 12.5mm graded crushed stone aggregate, welded, jointed all as per specified and directed by Engr-in-Charge. |
| 51 | S&F in repairs decorative curtain rod made out of 25mm dia (outer dia) MS pipe having wall thickness 0.63mm, PVC coated of any colour and pattern as approved overall dia 28 to 28mm, includiing and including two nos brackets on each ends alongwith globe on each ends for earch window/door fro fixing complete all as specified and directed with fancy design |
| 52 | S&F in repair Bath cabinet mirror of size 350 x 450 mm made of PTMT alloy complete all as specified. With fancy design.Make Jaquar, Kohler, Kajaria |
| 53 | S&F inrear Health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in positiion complete in all respect as specified Make Jaquar, Kohler, Kajaria |
| 54 | S&F in repair vitreous china wash basin, white flat back size 550 x 400 mm including waste, chain & plug and poreclain stopper and bracket etc. Complete including cutting for and pinning in ends of brackets or errecting bracket and 32mm dia waste fitting brass chromium plated for WHB etc;with long screwed shanks and fly nuts,flange end bedded in red lead cement including 32mm dia waste pipe fitted complete all as specified and directed |
| 55 | S&F in repair for PVC waste pipe of 32/38/40 mm dia and 1000 mm long to WHB, urinal and Kitchen sink complete all as specified and directed with fancy design. |
| 56 | S&F in repairs pillar tap cast 15mm bore copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without lettered head 'HOT' or 'COLD' with long screwed shank and flynuts screwed for iron pipe (half turn type) |
| 57 | S&F in repair stop valve (concealed type), cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore. |
| 58 | S&F in repair Angle valve / stop valve , cast copper alloy fancy type chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions Mand fixed of size 15mm bore with fancy design (half turn type) |
| 59 | S&F in repair Angle valve two way, cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore with fancy design (half turn type) |
| 60 | S&F in repairs fancy type shower rose, screwed down, screwed for iron pipe or for brass ferrule |
| 61 | S&F in repairs Bib taps fancy type cast copper alloy chormium plated 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule (half turn type) |
| 62 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm |
| 63 | S&F in repair Brass chromium plated tubular towel rail 20mm dia,D type, 60 cm long between flanges. |
| 64 | S&F Corner Glass Shelf 300 mm (with fancy ABS brackets) of size (300x300)mm complete all as specified and as directed with fancy design. |
| 65 | S&F in repair CP soap Dish approx size 160x 160x90mm complete all as specified and directed |
| 66 | Dismantling of existing water tanks and removinging to store and S&F 1000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &high density plastic ball screwed for iron pipe and fixed. |
| 67 | Taking up or down steel tubing and connection of 15 mm bore complete all as specified directed at site |
| 68 | All as per item No 67 above but for 20 mm bore pipe |
| 69 | Supplying and laying 16mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking up or down 15mm dia steel tubing and connections from wall / ceiling or laid floors including cleaning for refixing all as directed. |
| 70 | -Ditto-All as above item No 69 but for 20 mm dia |
| 71 | Cutting chases in brickwall pinning in making good to facings where required and pointing in cement mortar 1:3 to ends and cutting chases for concealed water tubing and making good cutting n.exc. 10 cm girth. |
| 72 | Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittins,heads,shoes,bends,swan-necks,etc including removing from site |
| 73 | M&L for 110mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed. |
| 74 | M&L for 75mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed. |
| 75 | S&F PVC (SWR) bends 110 mm bore of any radius all as specified & directed |
| 76 | S&F PVC (SWR) bends 75 mm bore of any radius all as specified & directed.. |
| 77 | S&F PVC (SWR) junction single (singleT) equal or unequal 110mm bore provided with access door all as specified & directed.. |
| 78 | S&F PVC (SWR) junction single (singleT) equal or unequal 75mm bore provided with access door all as specified & directed.. |
| 79 | S&F 110 mm bore PVC (SWR) vent cowl. |
| 80 | S&F 75 mm dia outlet PVC (SWR) floor trap plain with steel grating including jointing with solvent cement. |
| 81 | S&F 110mm dia PVC (SWR) WC connector with lip ring |
| 82 | S&F in repair for 10ltrs capacity flushing cistern PVC low level valve less, symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and 32 mm flush pipe of polyethylene complete all as specified and directed. |
| 83 | S&F in repairs vitreous china wash down water closet pan (Padestral Pattern) white with 'P' or 'S' trap including water closet seat, closed pattern with flat bottom, and cover mild steel chromium plated or aluminised hinging device excluding flushing cistern and flush pipe, all as specified and directed. |
| 84 | S&F in repair Vitreous China squatting plate urinals, white of size 310x700mm, complete including providing and fixing plugs, bedding urinal against floor in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed |
| 85 | S&F in repair fancy tpye Vitreous China urinals, bowl type flat back, size of 465 x 355 x 265 mm (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) including 32mm dia waste pipe fitted complete all as specified and directed. |
| 86 | Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth and getting out for foundation etc, or for shafts, wells, cespits, manholes, pier holes, for laying/ taking out of pipe in hard/dense soil complete all as specified and directed. |
| 87 | All as per Item No 86 here in before but exc 1.5 mtr but not exc 3 mtr. |
| 88 | Returning/refilling in trenches including spreading, levelling, watering and well ramming in layer not exc 25 cm thick, complete all as specified and directed. |
| 89 | Removal of excavated surplus soil not exc 50 m and depositing where directed at level not exc 1.5 m above the starting point, complete all as specified and directed. |
| 90 | Supply, laying, jointing & testing of DI pressure pipes socket or flanged type including machinary work and nut, bolts, washer, rubber gasket etc as per requirement, lining in inner side as per IS:8329/2000 (latest revision) and other relevant standards and mettalic zinc coating followed by a finishing layer of epoxy paint/bitumen on outer side, suitable for push on joint (rubber gasket joint) incl rubber gasket or to be fixed by means of nut bolt and washer in case of flanged pipe including suitable rubber gasket, in any length reuired at site laid horizantly or vertically in trenches/ manholes/closed chambers upto 6 mtr depth /over masonry pillar and connection to old or new position of Class \\"K-7\\" of size 200 mm dia bore complete all as specified and as directed. Note:- Before placing the order to manufacturer, contractor should take measurement from ground and get approval of Engr-in-Charge. Pipeline casted by manufactures factory only will be accepted. Any modification/welding/alteration by local workshop or by contractor will not be accepted. |
| 91 | All as per item No 90 here-in-before but of size 100 mm dia bore complete all as specified and directed. |
| 92 | Supply and fixing cast iron sluice valve with stainless steel spindle and cast iron hand wheel complying with IS 14846-2000, class PN 1.0 both ends flanged with with 2 nos rubber insertion gasket joints, nuts, bolts, & washers of required size & nos of size 200 mm dia in trenches/manholes/closed chambers upto 6 mtr depth /wall/floors concealed or open execution vertically or horizantally complete all as specified and as directed. |
| 93 | All as per item No 92 here-in-before but of size 100 mm dia bore complete all as specified and directed. |
| 94 | Material and Labour for PCC 1:3:6 type C1 using 20 mm graded aggregate for construction for thurst blocks to the pipe at corners and bends etc in trenches/manholes/closed chambers upto 6 mtr depth /wall/floors concealed or open execution vertically or horizantally including all type of frame or shuttering work complete all as specified and directed. |
| 95 | Material and labour for cutting existing CI water mains 200 mm dia in position for insertion of tee, branch line etc to new water connection in trenches/manholes/closed chambers upto 6 mtr depth /wall/floors concealed or open execution vertically or horizantally complete all as specified and directed. |
| 96 | All as per item No 95 here-in-before but of size 100 mm dia bore complete all as specified and directed. |
| 97 | Supply and fixing DI fittings for flaged and spigot type DI pipeline as per IS-9525 in all types and sizes and in form of mechanical joints, bends, tees, all types of flanges, socket and spigot, collars caps etc as required at site in trenches/manholes/closed chambers upto 6 mtr depth /wall/floors concealed or open execution vertically or horizantally complete all as specified and directed. |
| 98 | Supply & Fixing in repair MS ERW pipes flanged with necessary fittings, clamps etc and welding work for flanges and bends etc of any type and size in any length of pipe laid in trenches/manholes/closed chambers upto 6 mtr depth /wall/floors concealed or open execution vertically or horizantally of size 80 mm dia bore complete all as specified and directed. Note:- Before placing the order to manufacturer, contractor should take measurement from ground and get approval of Engr-in-Charge. |
| 99 | All as per item No 98 here-in-before but of size 100 mm dia bore complete all as specified and directed. |
| 100 | Supply and fixing non-return valve in trenches/manholes/closed chambers upto 6 mtr depth, complying with IS 14846-2000, class PN 1.0 both ends flanged with with 2 nos rubber insertion gasket joints, nuts, bolts, & washers of required size & nos of size 200 mm dia including taking down of old non-return valve in trenches/manholes/closed chambers upto 6 mtr depth /wall/floors concealed or open execution vertically or horizantally complete all as specified and as directed. |
| 101 | Supply and fixing foot valve in trenches/manholes/closed chambers upto 6 mtr depth , complying with IS 14846-2000, class PN 1.0 both ends flanged with with 2 nos rubber insertion gasket joints, nuts, bolts, & washers, strainer of required size & nos of size 200 mm dia including taking down of old foot valve in trenches/manholes/closed chambers upto 6 mtr depth /wall/floors concealed or open execution vertically or horizantally complete all as specified and as directed. |
| 102 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safecustody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. etc complete all as directed. |
| 103 | Taking down old/unserviceable MCB DB SPN/TPN any capacity by disconnection of electric connection including MCBs,Isolators,etc and making good to disturbed surface complete all as directed. |
| 104 | Taking down carefully copper/aluminium sub main wiring of size 4&6 sqmm from surface/concealed at any height and removing the materials from site and making good the disturbed surfaces of walls,floors roofs etc complete all as directed. |
| 105 | M&L for point wiring for One light/Fan point controlled by one five amps one way single pole switch complete with 1.5 sqmm , single core , multi stranded copper conductor PVC insulated and unsheathed FRLSH cable 1100 Volts grade , drawn through PVC concealed conduit 20/25 mm dia on wall/ceiling ,including replacement by new modular sheet top covers and sunk type CI/steel terminal boxes ,cromium plate screw as suitable size for mounting of switch & scoket including 1.5 sqmm size pvc insulated unsheathed copper conductor to common earth and connecting to earth dolly complete all as specified and directed.Note: The rate quoted is deemed to be included for modular sheet and steel terminal box including cutting chases in wall making good to disturbed surface and matching with existing surfaces. |
| 106 | All as per Ser item No 105 here-in-before but one 3 Pin Socket out let 5 Amps on the same board. |
| 107 | All as per Ser item No 105 here-in-before but one 3 Pin Socket out let 5 Amps on the independent board. |
| 108 | All as per Ser item No 105 here-in-before but point wiring with 2.5 sqmm for 15 Amp socket outlet & provision of earth wire 2.5 sqmm connected to common eart dolly. |
| 109 | S&F Switch modular, one way 6 Amps 240 Volts one module complete all as specified & directed. |
| 110 | S&F Switch modular, one way 16 Amps 240 Volts one module complete all as specified and directed. |
| 111 | S&F Socket modular one way 6 Amp 240 Volts two module complete all as specified and directed. |
| 112 | S&F Socket modular one way 16 Amps 240 Volts two module complete complete all as specified & directed. |
| 113 | S&F Ceiling rose, 3 terminal PVC/polycarbonate complete all as specified and directed. |
| 114 | S&F modular fan regulator step type, 230 Volts single phase 120 watt complete all as specified and directed. |
| 115 | M&L for submain complete with 2X4 Sqmm , single core, multi stranded copper conductor , PVC insulated and unsheathed FRLSH cable 1100 Volts grade, drawn in with and including PVC concealed conduit 20/25 mm dia as per site requirement along walls/ceiling etc including 1X 4.0 Sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed. Note:- (i) all three wire(Phase red colour,neutral black colour and earth wire green colour) should be run through for each individual circuit from the DBs(ii) painting over surface conduit to be done to match with walls/ceiling existing surfaces. (iii) Two run of wire (phase & neutral) and one run of wire (earth conductor) be measured as one length) |
| 116 | All as per ser item No-115 here-in-before but 2X 6 Sqmm and 1X 6.0 Sqmm for Earth wire |
| 117 | Supply and fix MCB DB SPN 8 way double door with metal door suitable for housing of MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed. |
| 118 | Supply and fix MCB DB SPN 4 way double door with metal door suitable for housing of MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed. |
| 119 | Supply and fix MCB DB VTPN 4 way with metal door suitable for Provision of incommer and out going MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed. |
| 120 | Supply and fix in replacement MCCB 100 Amp 415 volts 16kA 4 pole complete all as specified and directed at site. |
| 121 | S&F in replacement of MCB SP 6 to 32 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed. |
| 122 | S&F in replacement of MCB DP 40 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles. |
| 123 | S&F in replacement of isolator DP 63 Amps 'C' Series fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed. |
| 124 | S&F in replacement of LED tube light fitting 20 watt 230 Volt decorative ultra slim linear LED Lighting with aluminium housing & integrated electronic driver , including all internally pre-wired and inncluding connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. |
| 125 | S&F in replacement of Lienear & compact 9 wat LED mirror light with decorative grey end caps,polycarbonate body and ribbed opal diffuser including 2/3 core flexible copper wire with flexible pipe ceiling rose to light fittings complete all as specified and directed. |
| 126 | S&F ceiling fan 230 volts, 50 Hz 1200mm sweep with down rods, canopy, blades, BLDC motor etc complete with service value of the fan shall be greater than 6.1 as per BIS including necessary electric connection from ceiling rose to fan terminal with engraved MES No with synthetic enamel black paint including taking down old fan and deposited to MESstore yard complete all as specified and directed. |
| 127 | Supply and fixing energy efficent LED slim square polycarbonate housing down lighter with superior light output and integral including surface ring mounting fitting 18W white powder coated Seamless front frame soft diffuser non integral driver acrylic cover Cat No : LCDEP-18 CDLof Crompton or equivelent in CG/Havels/Philips/Bajaj |
| 128 | Supply, installation, testing & commissioning of under water LED lumi plus flexi niche, lumiplus PAR 56 series standard light complete all as specified and directed. |
| 129 | Supply, installation, testing & commissioning of junction boxes made in ABS, composed of 3 entries 3/4\\" or PG16 copling complete all as specified and directed. |
| 130 | Supply, installation, testing & commissioning of cable conduit hose, flexible 1 mtr long conduit for con light to junction box 3/4\\" and PG 16 threaded ends complete all as specified and directed. |
| 131 | Supply, installation, testing & commissioning of electronically regulated low voltage swimming pool transformer with IP 55 enclosure, electrostatic protective shield between primary and secondary windings internal thermal protection against over load, 300VA 240Volts primary voltage and 12 secondary voltage 12-16 volts complete all as specified and directed. |
| 132 | S&F in repair exhaust fan steel body AC single phase 300 mm sweep complete with louver shutter and including making of hole suitable size fan base after cutting of brick/stone wall /suitable size of water proof ply wood including deposit of old fan to MES store yard complete all as specified and directed. |
| 133 | S&F in replacement of building LED security light fitting 40 Watt in aluminium pressure die cast aluminium housing with high power LED as lightning sourse and lens embedded PC Cover having IP 65 protection and impect resistance of IK07 with 10 KV Built in super protection device. luminaire with high power LED as light source including suitable size of GI bracket fixed with two Nos GI clamp nut,bolt,washer etc complete all as specified and directed at site. |
| 134 | Supply, Laying on replacement ,connecting, testing and commissioning of XLPE LT UG cable of size 35 sqmm 3 1/2 core PVC insulated and sheathed armoured heavy duty cable 1100 V grade with alu conductor cable all as directed. |
| 135 | Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying of cables, poles/stays and struts etc and getting out including trimming sides and forming bottom surface complete, all as specified. |
| 136 | Removing excavated surplus (soil) obtained from excavation to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete, all as specified. |
| 137 | Returning & filling in including spearing, leveling watering and well ramming in layers not exc 25cm thick |
| 138 | Supply and Spread dry river sand for cable cushioning in trenches all as specified and directed.Note : Punned down thickness shall be considered for measurement |
| 139 | Supply and lay burnt bricks sub class ‘B’ old size laid dry in trenches across the cable protection all as specified and as directed Please Enable Macros to View BoQ information |
| 140 | Supply and lay burnt bricks sub class ‘B’ old size laid dry in trenches across the cable protection all as specified and as directed Please Enable Macros to View BoQ information |
