|
| 1 | 55 sqmm AAAC |
| 2 | MS Channel 75x40x6mm |
| 3 | 11KV Pin Insulator, Polymer |
| 4 | 7/10 SWG GI wire (for stay) |
| 5 | G.I. Nuts, bolt & Washer |
| 6 | GI Barbered wire for anticlimbing |
| 7 | Concrete materials for stay anchor plate |
| 8 | padding and concreting materials for sup |
| 9 | Fabrication & Galvanisation |
| 10 | 11 mtr 160X160 GI WBP Pole |
| 11 | 75x40x6mm. Channel for Straight Cross-ar |
| 12 | 11 KV V- Cross Arm (MS)(10.2 Kg each) |
| 13 | Back Clamp for 'V' CrossArm (1.7kg) |
| 14 | 11 KV F Clamp 2.9 Kg.each |
| 15 | 11KV B&S Disc Insulatorpolymer 70 KN |
| 16 | 11KV B&S Hardware Fitting |
| 17 | PG Clamp for 100Sqmm AAAC |
| 18 | 11KV Pin Insulator polymer |
| 19 | H.T. Stay Set Complete |
| 20 | HT Stay Insulator |
| 21 | Stay clamp |
| 22 | 7/10 SWG Stay Wire |
| 23 | G.I. Nuts, bolt & Washer |
| 24 | Earthing of support (CoilType) |
| 25 | Fabrication & Galvanisation |
| 26 | Concrete materials for stay anchor plate |
| 27 | padding and concreting materials for sup |
| 28 | 11 mtr 160X160 GI WBP Pole |
| 29 | MS Channel 100x50x6mm |
| 30 | MS Channel 75x40x6mm |
| 31 | MS Angle 50x50x6mm |
| 32 | 11 KV Polymer DiscInsulator B&S (70 KN) |
| 33 | 11 KVH/W fitting for Disc(70KN) |
| 34 | Gl Flat 25x6 mm |
| 35 | H.T.Stay set complete |
| 36 | HT Stay Insulator |
| 37 | HT Stay Clamp |
| 38 | 7/10 SWG Staywire |
| 39 | 40mm nominal bore GIpipe (medium gaug |
| 40 | Earthing of support(Coiltype) |
| 41 | G.I. .Bolts, Nuts & Washers. |
| 42 | Material for masonry workfor earth pit |
| 43 | Charcoal, Salt etc. forearthing. |
| 44 | GI Barbered wire forAnticlimbing |
| 45 | Danger Plate |
| 46 | 10 Core 2.5mm sq ControlCable for MU in |
| 47 | Concrete materials for stay anchor plate |
| 48 | padding and concreting materials for sup |
| 49 | fabrication & Galvanisation |
| 50 | 9 Mtr. long 150X150 mm.RS Joist Pole |
| 51 | CABLE 1.1KV AB3x95+1x70+1x16 SQMMXLPE |
| 52 | 4 core Al PVC armoured 25sqmm |
| 53 | POLE CLAMP |
| 54 | CLAMP DEAD END |
| 55 | CLAMP SUSPENSIONWITH EYE HOOK FOR ABCA |
| 56 | NEUTRAL CONNECTOR |
| 57 | WIRE GI STRANDED 7/12SWG-7/2.64 MM |
| 58 | LINE STAY CLAMP FOR LT |
| 59 | INSULATOR STAY FORL.T. |
| 60 | EARTHING COIL |
| 61 | WIRE GINO.8 SWG/4.06MM FOR EARTHING |
| 62 | BOLT & NUT GI 16 x 55MM |
| 63 | PIERCING CONNECTORLT TYPE A |
| 64 | Conductor ACSR PVC(61.7 Sqmm) |
| 65 | LT STAY SET COMPLETE |
| 66 | 4WAY SERVICE Distb.Boxwith kit kat fuse |
| 67 | Concreting of Stay |
| 68 | Padding & Concreting material for suppor |
| 69 | 11 mtr 160X160 GI WBPPole |
| 70 | 250 KVA, 11/0.4 KV Level-II(as per amnd |
| 71 | MS Channel 100x50x6mm |
| 72 | MS Channel 75x40x6mm |
| 73 | MS Angle 50x50x6mm |
| 74 | 11 KV Polymer DiscInsulator B&S (70 KN) |
| 75 | 11 KVH/W fitting for Disc(70KN) |
| 76 | PG Clamp for 100sqmmAAAC |
| 77 | GI Flat 50x6mm |
| 78 | Gl Flat 25x6 mm |
| 79 | 11KV A/B Switch (400 A,3pole, Hz type) |
| 80 | 11KV DD Fuse 3pole |
| 81 | DD Fuse Link Unit(20A) |
| 82 | 11KV Lightning Arrestor |
| 83 | Conductor ACSR PVC(61.7 sqmm) |
| 84 | H.T.Stay set complete |
| 85 | HT Stay Insulator |
| 86 | HT Stay Clamp |
| 87 | 7/10 SWG Staywire |
| 88 | 40mm nominal bore GIpipe (medium gaug |
| 89 | Pipe HDPE(25mm) |
| 90 | Pipe GI(100mm) |
| 91 | 1.1KV, 4Cx300 sqmmXLPE Cable |
| 92 | 1Cx300 mm2 LT XLPECable (Armoured) |
| 93 | Gland for arm(4Cx300sqmm XLPE Cable) |
| 94 | LT Distribution Box withMCCB, Aluminium |
| 95 | Al Cable Socket 70mm |
| 96 | Al Cable Socket 95mm |
| 97 | G.I. .Bolts, Nuts & Washers. |
| 98 | GI Barbered wire forAnticlimbing |
| 99 | Danger Plate |
| 100 | Fabrication & Galvanisation |
| 101 | Concrete materials for stay anchor plate |
| 102 | padding and concreting materials for sup |
| 103 | Economic Brick Design fencing |
| 104 | Plinth for transformer |
| 105 | Earthing Pit for Pipe Earthing |
| 106 | Inspection Fee For S/S upto 100KVA |
| 107 | Inspection Fee for HT Line for 1stKM Please Enable Macros to View BoQ information |
