Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: HQ CWE Jhansi Name of Work: SPL REPAIRS TO BLDG NO P-57, OFFICE COMPLEX OF HQ 36 ARTY BDE, MORAR CANTT GWALIOR Contract No: CA NO CWE/JHA/GWL/TOKEN/42 OF 2025-26 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15 cm thickness (below or above ground level) incl the disposal upto 50M complete all as specified and directed. |
| 3 | Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed. |
| 4 | M&L for cement concrete type E2 1:5:10 (using 40mm graded stone aggregate) as in sub base of floor or sunken floor etc complete all as specified and directed. |
| 5 | M&L for 25 mm thick cement concrete type B0, 1:2:4 (using 12.5mm graded stone aggregate) as in leveling course complete all as specified and directed. |
| 6 | M&L coloured vitrified ceramic tiles 8-10 mm thick, light shade (square/rectangular) polished,area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 as in floors. |
| 7 | Ditto- but tiles in vertical surfaces of wall set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick backing layer in CM 1:4 . |
| 8 | M&L coloured vitrified ceramic tiles 8-10 mm thick, light shade (square/rectangular) polished,area of each tile exceeding 0.42 sqm, but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 as in floors. |
| 9 | Ditto- but tiles in vertical surfaces of wall set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick backing layer in CM 1:4 . |
| 10 | M&L non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles, over screed bed or bedding layer 15 mm thick of cement mortar 1:6 complete all as specified and directed. |
| 11 | M&L for glazed ceramic coloured tiles in vertical surface 350mm x 250mm x 7mm/ 450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, aid over and including rendering 10 mm thick on fair faces brick work or concrete surface in cement plaster 1:4 complete all as specified and directed. |
| 12 | M&L Granite slab 18 mm to 20 mm thick machine cut, bedded and joined with cement and pointed with white cement with admixture of pigment to match in CM (1:4) .the shade of granite stone including cutting and polishing type as in cill and jamb/skirting, steps cooking plateforms includigng rounding off the exposed edges and polishing all as specified and directed.. |
| 13 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 14 | S&F for of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe 290,Gde E-165 complete all as specified and as directed . |
| 15 | S & F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or amgles with plates, including all lattice bars, stiffeners, gusset plates,etc Fe-410-W (Gde-E250) quality-A |
| 16 | S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering, Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guiders) and hanging, also fastening and fixing complete Fe 410-W (Gde-E-250) quality-A |
| 17 | Dismantling of asbestos cement (corrugated, semi-corrugated) ect sheets in roof covering including ridges etc complete all as specified and directed. |
| 18 | S&F, Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed. |
| 19 | S&F Pre painted galvalum aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having aluminum zinc coating 150 gms/ sqm steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall, ridge fixed with self tapping screws complete all as specified and directed. |
| 20 | S&F for flat iron 40x6mm thick wind ties fixed to CGI/Galvalume sheets on roof including or necessary drilling, bolting or riveting etc confirming to Fe- 290 grade E-165 complete all as specified and directed. |
| 21 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 22 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 23 | M&L for Brickwork with subclass 'B' bricks old size brick, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 24 | Brick work with sub class `B' bricks straight or curved on plan exc 6m mean radius, built in CM 1:4, in half brick walls. |
| 25 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:6, finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 26 | M&L for rendering 5 mm thick on faces or brick work ,concrete surfaces, in ceiling & in cm 1:3, finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 27 | M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement plaster 1:4 and mixed with WPC , finished even and smooth (without using extra lime or cement) complete all as specified and directed. (Note:- WPC shall be measured & paid seperately). |
| 28 | Supply only integral liquid water proofing compound (ISI marked) complete all as specified and directed. |
| 29 | M&L for preparation of new plastered ceiling surface and applying three coats of white wash complete all as specified and directed. |
| 30 | Material & Labour for new plastered surfaces applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 31 | M&L for new plasterd surface applying two coats of distemper oil emulsion white or tinted over and including a layer of 1-2 mm thick wall care putty on wall complete all as specified and directed. |
| 32 | M&L for complete removal of exiting treatment from external walls (any no of layers ) by scrapping with steel scrappers or any other means, preparation of old surfaces complete applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. all as specified and as directed by the Engineer in charge. |
| 33 | M&L for preparing of old surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efforecent salt and trading oil and greasy spots plastered or un plastered surfaces of wall including cornices, pilasters etc. and applying two coat of oil emulsion distemper white or tinted complete all as specified and directed. |
| 34 | M&L for preparation of old surface and applying one coat of white wash (lime) on walls inl cornices plastered or un-plastered surfaces complete all as specified and directed . |
| 35 | M&L for preparation of old surface and applying one coat of white wash (lime) on ceiling inl cornices plastered or un-plastered surfaces complete all as specified and directed . |
| 36 | Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories)complete all as specified. |
| 37 | S&F in replacement 75 mm dia PVC (SWR ) pipes single socketed in any length with rubber ring joints laid in floor or fixed on wall with necessary clamp complete all as specified and directed |
| 38 | S&F in replacement 110 mm dia PVC (SWR ) pipes single socketed in any length with rubber ring joints laid in floor or fixed on wall with necessary clamp complete all as specified and directed |
| 39 | S&F, PVC (SWR) bends any radius, 75 mm bore, provided with access door complete all as specified and directed |
| 40 | S&F, PVC (SWR) bends any radius, 110 mm bore, provided with access door complete all as specified and directed |
| 41 | S&F, 75 mm bore, PVC (SWR) junction single (single T), equal or unequal, provided with access door complete all as specified and directed. |
| 42 | S&F, 110mm bore, PVC (SWR) junction single (single T), equal or unequal, provided with access door complete all as specified and directed. |
| 43 | M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement |
| 44 | S&F for 110mm dia PVC(SWR) vent cowl, complete all as specified and directed. |
| 45 | S&F in replacement for PVC (SWR) 'P' or 'S' trap 110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 46 | S&F in replacement for PVC (SWR) floor trap/ Nahani trap 75mm, plain with greating including setting and jointing with solvent cement complete all as specified and directed. |
| 47 | Dismantling of water tank exc 250 ltrs and n. exc 500 ltrs capacity and removing from site complete all as specified and directed. |
| 48 | S&F,500 ltr capacity rotational moulded polythene water storage tank two layers ISI Marked (cylindrical vertical with closed top ) hoisted and fixed in position complete all as specified and directed. |
| 49 | Dismantling of water tank exc 500 ltrs and n. exc 1000 ltrs capacity and removing from site complete all as specified and directed. |
| 50 | S&F,1000 ltr capacity rotational moulded polythene water storage tank two layers ISI Marked (cylindrical vertical with closed top ) hoisted and fixed in position complete all as specified and directed. |
| 51 | S&F in replacement Ball brass valves high pressure with polythene float and flynut complete screwed for iron pipe of 20mm bore of brass ferrule complete all as specified and directed |
| 52 | S&F, in replacement 20mm stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union fixed complete all as specified and directed. |
| 53 | Taking up or down 15 mm dia steel water tubing and connections including cleaning for refixing if required or removal from site complete all as specified and directed. |
| 54 | Taking up or down 20 mm dia steel water tubing and connections including cleaning for refixing if required or removal from site complete all as specified and directed. |
| 55 | Supply and laying of 16mm CPVC pipes SDR 11 & plain CPVC SDR 11 fittings in trenches complete all as specified. |
| 56 | Supply and laying of 20mm CPVC pipes SDR 11 & plain CPVC SDR 11 fittings in trenches complete all as specified. |
| 57 | S&F in replacement for Stainless Steel Peg Set of 6 hooks ISI marked medium weight complete all as specified and directed. |
| 58 | S&F frameless with of 600x450mm beveled edges mirror of selected quality mounted fixed to wall with rawal plug and screws complete all as specified and directed. |
| 59 | S &F in replacements tublar towel rail aluminium anodised 20mm dia D type 60 cm long between flange brass chromium plated complete all as specified & directed. |
| 60 | S&F in replacement PVC connection of 450 mm length in replacement complete all as specified and directed. |
| 61 | S&F in replacement bib taps, fancy type 15 mm caste copper alloy long body, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe and fixed complete all as specified and directed. |
| 62 | S&F in replacement Brass CP mixer for basin mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 63 | S&F Health faucet ( ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible and ABS wall hoock including making connection and fixing in position complete all as specfied and directed |
| 64 | S&F, in repair flushing jet spray for wall hung EWC including 1 m long flexible pipe and brass chromium plated nuts, complete all as specified and as directed. |
| 65 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed |
| 66 | S&F in replacement angular stop cock fancy type 15 mm caste copper alloy, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe and fixed complete all as specified and directed. |
| 67 | S&F in replacement wash hand basin, vitreous china, white (counter sunk type) of approved size, excluding taps, waste, chain and plug and porcelain stopper but including brackets cutting for and pinning in ends complete complete all as specified and directed. |
| 68 | S&F in replacement wash hand basin vitreous china (flat back) of size 550 x 400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets cutting for and pinning in ends complete complete all as specified and directed. |
| 69 | S & F in repair Pillar taps cast copper alloy with capstan head Chromium Plated screwed down, high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly nut screwed for iron pipe and fixed complete all as specified and as directed |
| 70 | S&F in replacement 600x450mm beveled edges mirror of selected quality mounted on 6mm thick AC building board or plywood fixed to wall with rawal plug and screws complete all as specified and directed. |
| 71 | S&F in replacement waste fitting for wash basins and sinks with inlet and outlet, screwed for pipe or connections, and with one cleaning cap, 32mm bore complete all as specified and directed. |
| 72 | Supply & Fix for Vitreous China premium / 1st Quality wash down closet wall hung EWC white / Ivory/ with seat cover complete. |
| 73 | S&F for PVC low level flushing concealed cistern (10 lts capacity) with ball valve float and handle ,syphonic action type including brackets and flush pipe of polythelene of low or high density or PVC 32 mm dia as specified and directed. |
| 74 | S&F for in replacements Soap dish of CP fixed with PVC rawal plugs and screw, complete all as specified and directed. |
| 75 | S&F for in replacements Chromium plated grating 100 mm dia complete all as specified and directed. |
| 76 | S&F for in replacements vitreous china urinals, Size 680x470mm Half stall type ,white with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with 60 mm long brass screws, pointing around urinal back in cement and including fixing CP urinal spreader, complete all as specified and directed. |
| 77 | Taking down chowkhat frame with shutter (without taking out shutter from the frame) n.exc 1.50 Sqm each complete all as specified and directed. |
| 78 | Taking down chowkhat frame with shutter (without taking out shutter from the frame) exc 1.50 Sqm but n exc 4 sqm each complete all as specified and directed. |
| 79 | S&F for pressed steel frame of size 125 x 60 mm for door with one or more rebates makaing necessary fixing lugs,higes, lock strike plate, etc, complete, as specified, complete all as specified and directed. |
| 80 | S&F for pressed steel frame of size 105 x 60 mm for door with one or more rebates makaing necessary fixing lugs,hinges, lock strike plate, etc, complete, as specified, complete all as specified and directed. |
| 81 | S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, suppling & fixing in opening as per specification complete all as specified and directed. |
| 82 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 83 | S&F 30 mm thick Flush shutters ,soild core construction ,with block board core and plywood face panels , commercial type on both face is covered with decorative face veneer with lipping /frame to match and complete all as specified and directed. |
| 84 | S&F for 35 mm thick skeleton shutters of 2nd class Hard Wood for door, open rebated and prepare to reveive glass, guage etc (without sash bars ) edges of framing plain chamfered or rounded, fitted with for securing glass etc, size of members of shutters as specified in SSR Pt-I, section 8, clause 8.24(a) complete all as specified and directed. |
| 85 | S&F for 150 mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 86 | S&F for extruded aluminium alloy handles 150 mm, fabricated type, anodised complete all as specified and directed. |
| 87 | S&F for 100 mm butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 88 | S&F aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified and directed. |
| 89 | M&L for preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 90 | M&L for preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 91 | M&L for for applying one coat of synthetic enamel paint on old steel & iron surfaces (previously decorated) for grills, guard bars of any description not otherwise described over 10cm in width or girth including preparation of old surfaces complete all as specified and as directed. |
| 92 | S & F Anodised powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors , windows , ventilators, partitions with one or more rebates including jointing cleat for fixing etc. |
| 93 | S & F anodised powder coated aluminium door shutters, aluminium section weighing not less than 0.55 kg/m including necessary jointing cleats, Glazing clips , rubber neoprene packing, handles 2 Nos in each door, hinges, 200mm long aluminium tower bolts, anodised aluminium snap beading screws etc complete. |
| 94 | S & F anodised powder coated aluminium windows, ventillators shutters, slidding type, aluminium section weighing not less than 0.55 kg/m including necessary jointing cleats, Glazing clips , rubber neoprene packing, anodised aluminium snap beading screws, locking latches etc complete. |
| 95 | S & F anodised powder coated aluminium windows, ventillators shutters, side hung type, without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary jointing cleats, Glazing clips , rubber neoprene packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1 No). hingestype B-21 100mm long (2 no.) suitable handle (1 no.) locking latches etc complete all as specified and directed. |
| 96 | S&F 4.8 mm thick sheet or tinted glass of selected quality in square not exceeding 0.5 sqm in each pane, fixed to aluminum frame with and including suitable rubber beading complete all as specified and directed |
| 97 | S&F 4.8 mm thick sheet or tinted glass of selected quality in square exceeding 0.5 sqm in each pane, fixed to aluminum frame with and including suitable rubber beading complete all as specified and directed |
| 98 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 99 | M&L for repair Aluminum door of any type & any size, taking down and re-fixing including all small accessories (like handle, gaskit, hinges, tower bolt, door stopper etc) Complete all as specified and directed. Note : Glass & Particle board etc shall be paid separately. |
| 100 | M&L for repair Aluminum window of any type & any size, taking down & refixing including all small accessories (like handle, rubber/gaskit, hinges, tower bolt, door stopper etc) Complete all as specified and directed Note : Glass & wire mesh etc shall be paid separately. |
| 101 | S & F for door closer hydraulically regulated, designation No. 3, universal type, aluminium die-cast body (ISI Marked), suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repair complete all as specified and directed |
| 102 | S&F 12mmToughned Glass frameless as in hinged doors, automatic doors and similar work including cutting to shape, drilling holes , screws, clamp and accessories etc complete. |
| 103 | S&F floor spring for glass doors Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 104 | S&F in replacement for curtain rod of Stainless steel 23-25 mm dia pipe thickness not less than 0.8mm of pipe with fixing bracket, side nobes etc fixed on walls with screws with PVC rawl plugs etc complete all as specified and directed. |
| 105 | M&L for 75 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggrtegate as in plinth protection/path and the like including finsihing even & fair complete all as specified and directed. |
| 106 | S&F in repair 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 107 | S&F in repair Solid PVC Wall lining consisting of 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and as directed. |
| 108 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 109 | S&F for 18 mm thick PVC Celuka ply of one side prelaminated and other side plain white colour fixed with screws ,solvent cement /adehesive complete all as specified . |
| 110 | S&F for continous (piano) hinges , mild steel, bright finished or electrogalvanised, width of flap 30mm complete all as specified and directed. |
| 111 | S&F for mild steel Easy- slide auto Hydraulic hinges (CH-S-8), package contains 2 units of hinges with 4 Nos screw for kitchen cabinet, Cup board, wardrobe etc complete all as specified and directed. |
| 112 | S&F for 12 mm thick PVC Celuka ply of both side prelaminated and other side plain white colour fixed with screws ,solvent cement /adehesive complete all as specified . |
| 113 | S&F for magnate catcher of metal body and striking plate heavy duty includind fixed with screw, complete all as specified and directed. |
| 114 | S&F Brass 2 Levers Cupboard locks grade 1, Size 50mm complete all as specified and directed. |
| 115 | S&F for 100 mm Brass handles, cast type, polished bright and fixed complete all as specified and directed. |
| 116 | M&L for Dismantling of AC ceiling board any descrition complete all as specified and directed. |
| 117 | S&F for anodised aluminium snap grid frame work for false ceiling consists of powder coated aluminium angle 22x22x1.3 mm and Tee 35x25x1.3 mm of size and grid 600x600 mm complete all as specified and directed. |
| 118 | M&L for Non asbestos fibre cement building boards 6 mm thick fixed or laid/ inserted to Aluminium anodised frame and hanges framework fixed with Hangers 3-4 mm dia. G.I. (upto reqd length) adjusting level fixed to roof slabs by means of ceilling cleats complete all as specifed and directed |
| 119 | M&L for PCC (1:4:8) type D-2, (using 40 mm graded stone aggregate),100 mm thick, as in sub base for floor, finished even and rough complete all as specified and directed. |
| 120 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed |
| 121 | M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. |
| 122 | M&L 80 mm thickness machine pressed precast concrete interlocking paver block M-40 any shape and size confirming to IS 15658-2006 with grey cement and pigment glossy finish rubber mould casted laid dry over sand cushioning complete all as specified and directed (Make : Mahtab / Gwalior Granite/ Ravi Tiles/Eqwt ISI marked make ) |
| 123 | Heat Reflective Cool Coating for Pre Painted Galvalume Aluminium Zinc Coating GI sheet and Exterior Surfaces. M&L for the surface shall be thoroughly cleaned from all contaminants like dust, traces of grease & oil and grinding to be done for proper adhesion to the substrate. The prepared surface will be applied with two coats of Apcorep Evercool or equivalent over a coat of Primer complete all as specified and directed. Notes: -Primer - Add 400 Ml clean water to 1 Kg Apcorep Evercool or equivalent, stir thoroughly and apply on the prepared surfaces using brush or spray coverage at least 6 - 8 sqm/kg upon dilution. Top Coat - Apply Two coats of Apcorep Evercool or equivalent over a coat of primer applied surface with an interval of 12 hours minimum between the coats having coverage of 4 -5 sqm/kg/coat.> Solar Reflectance Index - 104% > Specific Gravity - 1.23, > Solid Content > 60%,> Tensile Strength as per ASTM D 638 should be min 1.95N/mm2. The coating shall reflect damaging ultraviolet rays from the structure with an good adhesion properties with GI sheet, may reduce surface temperature upto 7°C. |
| 124 | Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed. |
| 125 | Taking down ceiling/exhaust fan of any sweep,removing blades, cleaning the fan completely of dust and dirt and Re-hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook rubber pad, nut bolts and washers etc, complete all as specified and as directed by Engr-in-charge. |
| 126 | Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed. |
| 127 | Taking down unserviceable Sheet metal box & MCB DB SPN with MCB's of any make/capacity, complete, all as specified and directed by Engr-In-Charge. |
| 128 | Taking down unserviceable TPN DB with MCB's of any make/capacity, complete, all as specified and directed by Engr-In-Charge. |
| 129 | M&L, concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No) not less than 20 mm dia with all fitting and fixing accessories and 1.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes factory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches. sockets etc complete |
| 130 | One light point controlled by one switch. |
| 131 | One Ceiling fan point controlled by one switch. |
| 132 | One Exhaust fan point controlled by one switch. |
| 133 | One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch. |
| 134 | One 3 pin/5 pin switch socket outlet, 5 Amps on independent board. |
| 135 | One light point controlled by 2 x two way switches |
| 136 | Three light point controlled by one switch. |
| 137 | Description all as per item No 6 here in before but point wiring with 2.5 sqmm FRLSH H confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire. |
| 138 | S&F Modular switch 1 way 6 A,1 module complete all as specified and directed. |
| 139 | S&F Socket, 6A - 2/3 pin combined 2 module,complete all as specified and directed. |
| 140 | S&F Modular switch 1 way 16 A,1 module complete all as specified and directed. |
| 141 | S&F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. |
| 142 | S&F switch piano, flush button single pole two way 5 Amp complete all as specified and directed. |
| 143 | S&F ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed. |
| 144 | S&F Fan step regulator, 120W - 2 module 240 volts, AC 50Hz complete all as specified and directed. |
| 145 | S&F Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings ISI Marked complete. |
| 146 | S&F LED Lamp 12 Watt, efficiency > 130 lumen/wattwatt complete with 5 star rating. |
| 147 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete as per specified and directed |
| 148 | S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 6500K fitting ,Efficiency >110 lumen /watt incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed. |
| 149 | S & F security light fittings better optics for uniform distribution IP 66 protection LED of 30 watt with photometric sensor automatic on/off at night/mornng, Heat resistance glass, pressure die cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60mtr fixed to wall with 02 Nos FI clamps made of 40 x 5 mm FI, 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including reqd length of 1.5 Sqmm PVC multistranded BIS marked, 03/02 core copper conductor for connection from ceiling rose to light fittings incl testing on completion all as specified and directed. |
| 150 | S & F 9 Watt Concealed Ceiling LED Light in Round shape Lighting Color - White all specified and directed |
| 151 | S & F Solar LED Pathway Lamp BIS Approved IP65 Water proof Bollard Landscape Lamp with 800mAh Ni-MH Battery & Panel Decoration LED Spotlight for Walkway 2.5 ft Height including all accesseries Lighting Color -Warm White all specified and directed |
| 152 | M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 2.5 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 20 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 2.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. (NOTE: (i) Two run of single core of size 2.5 sqmm FRLSH cable with one run of size1.5 sqmm FRLSH cable of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface. |
| 153 | M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. (NOTE: (i) Two run of single core of size 6 sqmm FRLSH cable with one run of size 4 sqmm FRLSH cable of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface. |
| 154 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) with wireless remote control all as per specified and directed. |
| 155 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers all as per specified and directed. |
| 156 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m all as per specified and directed. |
| 157 | S&F sheet metal enclosure double door for distribution board factory made for MCB DB load link VTPN 8 way suitable for MCCB as incomer, 160 Amp,4 pole & Including MCCB 100 amps 4 pole 16 KA complete with 24 Nos. MCB SP 63 Amp with suitable size of busbar complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking down all as directed by Engr-in-Charge at site. |
| 158 | S&F MCB DB, sheet metal enclosures double door SPN 12 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed. |
| 159 | S&F, MCB SPN 63 Amps, 240 volts 'C' series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed. |
| 160 | S&F, MCB SP 240 volts, 10 to 32 Amps, 'C' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed. |
| 161 | S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amp complete all as specified and directed. |
| 162 | Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 35 Sqmm 3.5 Core. |
| 163 | Excavation in trenches n exc. 1.5 m wide and n' exc. 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 164 | Returning, filling of excavated soil, including spreading leveling, watering and well ramming in layers, not exceeding 25cm complete all as specified and directed. |
| 165 | Removing of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete. |
| 166 | Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete. |
| 167 | Supplying and laying un reinforced precast concrete cable cover Class LV, Type I, flat size 250mm x 150mm x 40mm complete all as specified and directed. |
| 168 | S&F tube 'Light' grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed. |
| 169 | Supply and fix cable jointing kit for 1.1 KV grade cable for end joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 25 to 50 sqmm,Indoor/Outdoor type complete all as specified and directed. |
| 170 | Taking out old u/s pipe line alongwith fittings from existing connections of size 25 mm dia complete all as specifies and directed. |
| 171 | Taking out old u/s pipe line alongwith fittings from existing connections of size 20 mm dia complete all as specifies and directed. |
| 172 | M & L for GI pipe Med grade of 25 mm dia alongwith all fittings and fixtures complete laid in trenches all as specified and directed. |
| 173 | M & L for GI pipe Med grade of 20 mm dia alongwith all fittings and fixtures complete laid in trenches all as specified and directed. |
| 174 | S&F 25 mm PPR Gate Valve (Brass insert) cofiorming to IS 14846/2000,ISI Mark MS Spindle and iron wheel head with both ends flanged with new rubber gasket,bolts and nuts including dismantling of old u/s Gate valve fixed at any location of size 25 mmm dia all as specified and directed. |
| 175 | S&F 20 mm PPR Gate Valve (Brass insert) cofiorming to IS 14846/2000,ISI Mark MS Spindle and iron wheel head with both ends flanged with new rubber gasket,bolts and nuts including dismantling of old u/s Gate valve fixed at any location of size 20 mm dia all as specified and directed. |
| 176 | M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test. Testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12 mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe including provn of earth test point made of 50 x 5 mm MS Flat in 'D' shape 500 mm legth grouted in wall complete 01 x 6 mm multistrand PVC insulated copper conductor ( Green Colour) to be provided from test point to DB through 20 mm dia concealed non metallic conduit complete all as specified and directed as per MES Schedule Part I & II.. |
| 177 | S&F for modular plate and provising of new modular plate of different size with flush metel box including fixing ,the existing modular switchs , modular socket ,modulare regulator and refixing them in new board |
| 178 | White cover plate with frame but 2 module |
| 179 | White cover plate with frame but 3 module |
| 180 | White cover plate with frame but 4 module |
| 181 | White cover plate with frame but 6 module |
| 182 | White cover plate with frame but 8/12 module Total in Figures 23 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
