|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All Kind of soil |
| 2 | Ordinary Rock |
| 3 | Dumping stone including cost of stones.in Horizontal on level |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 5 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished 40 mm thick with 20 mm nominal size stone aggregate |
| 6 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 7 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level ::1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 8 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete. |
| 12 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 13 | Columns, pillars, piers, abutments, posts and struts. |
| 14 | Suspended floors, roofs, landings, balconies and access platforms. |
| 15 | Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 16 | Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size) |
| 17 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class Kail wood |
| 18 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Second class Kail wood |
| 19 | Providng & fixing of Float glass panes 4 mm thick glass pane (weight not less than 10kg/sqm)., with wooden fillets wherever required complete |
| 20 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately)Second class teak wood 30 mm thick shutters |
| 21 | Providing and fixing traditionally carved wood work (Shingstak) over doors and windows including all accessories as per the direction of the Engineer in-charge, complete with;Budloo wood |
| 22 | 15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 4 ( 1 cement : 4 fine sand) |
| 23 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) sqm |
| 24 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.Q.V.I (17B+18) |
| 25 | Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 26 | Finishing walls with textured exterior paint of required shade : 13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqmQ.V.I (17A) |
| 27 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primerQ.V.I (19) |
| 28 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 29 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including Hot finished welded type tubesTaking 3.0kgs/sft x Q.V.I (22)including Steel rack inn store, Stair railing, Water Storage tank stang, Window grill etc |
| 30 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. |
| 31 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diametre with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/ m3 |
| 32 | Filling available excavated earth (excluding rock) in trenches, plinth, sides offoundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 33 | Providing & fixing 12mm thick ready made wooden flooring incl 1mm thick thermocol incl placeing in position complete job.(AC-4). |
| 34 | Providing and fixing 12mm thick ply board with 4\\" width plank tongued and grooved, incl. placing in position complete job. |
| 35 | Providing & Fixing Fan Box |
| 36 | Providing & Fixing Conceal Box |
| 37 | Wiring for light point 6amp socket/exhaust fan point / call bell point /with 1.5 Sq.mm PVC FR insulated copper conductor single core in surface/recessed medium class PVC conduit, suitable size MS box and earthing the point with 0.75 Sq.mm. FR PVC insulated copper conductor single core cable as required. |
| 38 | Wiring for 16amp socket outlet with 2.5mm FR PVC insulated copper conductor cable in existing recessed PVC conduit , including sheet as required. |
| 39 | Supplying and fixing of 25mm PVC conduit capping along with accessories in surface/recessed including cutting the wall and making good the same in case of recessed conduit as required. |
| 40 | Supply and fixing of a 10amp 240 volt single pole grid plate mounted switch indicator with molded copper plate including recessed 2 inch M.S box complete as required including connection. |
| 41 | Supply and fixing of combined 3 pin 240 volt 10amp socket outlet with safety shutter and 10amp 240 volt single pole mounted in recessed including M.S box complete as required |
| 42 | Supply and fixing of combined 3 pin 240 volt 10amp socket outlet with safety shutter and 20amp 240 volt single pole mounted in recessed including M.S box complete as required |
| 43 | Supply and fixing of following single pole and neutral sheet steel MCB distribution board 240 volt on surface recess complete with tinned busbar neutral link earth bar, tin bar, detachable glaud plates, double door interconnected including pointing etc as required 16 way double door SPN. |
| 44 | Supply and fixing of the following light fixtures including all accessories like electronic ballasts coms etc, complete as required concealed/Tube lightning 20 watt 3000k, round LED Luminaries as per Philips |
| 45 | Supply and fixing of the following light fixtures of 2'-0\\" x 2'-0\\" L:ED Panel including all accessories like electronic ballasts coms etc, complete as required 36 watt, Complete job |
| 46 | Supply and fixing of miniature circuit breaker of following poles in the existing MCB DB completed with connections testing andcommissioning etc, as required. A) Single pole 6/10/20 Amp |
| 47 | B) Double pole 40 Amp |
| 48 | C) Double pole 63 Amp |
| 49 | 3 modular plate |
| 50 | 6 modular plate |
| 51 | 8 modular plate |
| 52 | 12 modular plate |
| 53 | supply and fixing 25sqm 3.5 core armoured main wire all complete job |
| 54 | Supplying and fixing of 120 watt LED Street Light complete with GI pipe bracket duly embeded along the parapet /wall.Wipro LR02 -501-XXX-57-G1or equivalent approved make |
| 55 | Providing and fixing brass bib cock of approved quality. 15mm nominal bore. |
| 56 | Providing and fixing flow trap of PVC . |
| 57 | Providing and fixing floor jail. |
| 58 | Providing and fixing soil, waste and vent pipes 110mm dia PVC. |
| 59 | Providing and fixing soil, waste and vent pipes 90mm dia PVC. |
| 60 | Providing and fixing of PPR pipe complete with PPR fitting and damps including cutting and making good the walls etc internal complete. 25mm |
| 61 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and color. 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. |
| 62 | Providing and fixing of plain bends of required degree.110mm dia PVC. |
| 63 | Providing and fixing of plain bends of required degree.90mm dia PVC. |
| 64 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 65 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 66 | Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade.Raj Nagar plain white marble/ Udaipur green marble/ Zebra black marble |
| 67 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 68 | PROVIDING AND FIXING OF 2.5 TONS INVERTER SPILT AC (COPPER CONDENSER) 7 IN 1 CONVERTIBLE (HOT AND COLD) PM .1 AIR PURIFICATION FILTER, HIDDEN DISPLAY ETC OF VOLTAS, LG , PANASONIC OR EQUIVALENT BRAND INCL WIRINIG ,SWICHT, STABLIZER ALL COMPLETE JOB. |
| 69 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 70 | Providing and laying 60mm thick factory made cement in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 71 | Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : Ordinary cement without any pigment |
| 72 | CARRIAGE OF MATERIALS By Mechanical Transport including loading, unloading and stackingCement & Steel (avg. lead 5km) |
| 73 | Sand & Stone agg (20mm n/s) (avg. lead 10km) |
| 74 | Soling stone (avg. lead 5km) |
| 75 | Transportation of boring equipment, machine, tools to the new site of bore well. Fixing of complete camp by way of erection of equipment tools ,accessories,attachement fixing of tent for labour and stacking of materil at bore well site. The job include leveling of ground, dirlling machine and other charges on account of POL etc.a) For 1st shifting of boring machine and equpiment |
| 76 | Drilling of bore hole with 137mm dia bit using ODEX method of drilling as per site condition up to depth in collasiplable/ rocky strata, conglomerate ,boulders pebbles, clay etc. including cost of M.S casing pipe consumable store, drilling bits POL etc. with the system of sumlantinously lowering of 100mm dia ID M.S casing pipe 5 to 8 mm thickness which shall be welded together. Please Enable Macros to View BoQ information |
