|
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in soft loose soil |
| 2 | Removal of excavated material to a distance nexc 50 m and depositing at a level nexc 1.5 m above the starting point |
| 3 | Returning filling in including spreading levlling ,atering and well ramming in layers nexc 25cm thick complete all as spfd. |
| 4 | M&L cement concrete (1:4:8) type D2 using 40mm graded stone aggregate as in foudation, filling, sub base and mass concrete all as specified. |
| 5 | M&L for mild steel TMT bars 10mm dia and over cut to length bent to shape as reqd , incl crancking bending ,spirally for hooping columns hooking ends and binding with and including mild steel wire not less than 0.9 mm dia. |
| 6 | M&L for mild steel TMT bars 5mm dia and over upto incl 10mm cut to length bent to shape as reqd ,as in stirrups and spacers. |
| 7 | M&L for reinforced cement concrete as in beams, lintels etc ,(Design Mix M-25) ,using 20 mm graded crushed stone aggregate. |
| 8 | M&L for reinforced cement concrete as in foundation ,including footings ,foundations beams , bases for columns ,etc ,(Design Mix M-25) ,,using 20 mm graded crushed stone aggregate. |
| 9 | M&L for reinforced cement concrete as in columns ,pillars ,etc ,(Design Mix M-25),using 20 mm graded crushed stone aggregate. |
| 10 | M&L for reinforced cement concrete as in slabs supported on wall, beams and columns in floors roofs landings ,etc (Design Mix M-25) ,using 20 mm graded crushed stone aggregate including necessary form work all as directed. |
| 11 | M&L for Form work to sides of concrete foundations, footings, bases of columns, raft, and raft beaams sides and soffits of foundation and plinth beams and similar work and fair finished surfaces etc complete. |
| 12 | M & L for Form work to sooffits and sides of beams finished rough complete all as directed |
| 13 | M & L for Form work to sides of sides of pillars columns of sq or rectangular finished rough complete all as directed |
| 14 | M&L cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed all as specified. |
| 15 | M& L for Sand filling under floors or in foundations including watering and consolidation all as directed |
| 16 | M & L for Hardcore of gauge n exc. 63 mm, broken stone and boulders to deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface |
| 17 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as directed |
| 18 | M&L 15mm thick rendering in cement mortar (1:6) on fair faces of brick/ concrete surfaces of walls , finished even & smooth without using extra cement all as specified. |
| 19 | M&L 15mm thick rendering in cement mortar (1:4) on fair faces of brick/ concrete surfaces of walls , finished even & fair without using extra cement all as specified.. |
| 20 | S & F framed work as in door or gates of angle ,MS hollow pipes, solid SQ sections Flat iron etc or other section with gusset plates, rails, braces etc complete with steel sheeting as required to be prepared for hanging or sliding with and including MS Channel as posts & hold fasts & suitable arrangements for locking etc including welding complete all as specified & directed conforming to Fe 290.Gde E165. |
| 21 | S&F Pre-laminated galvatume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 22 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 23 | Providing and fixing Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finishand including 605mmx605mm of grid GI frame work for seamless ceiling comprising of GI channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to centre to centre/ intermediate channel 0.90mm thick having two equal flanges of 15mm ach and web of 45mm suspended from soffit or trusses at approx 900mmcentre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) o 0.55mm thickness having kurled web of 50mm and flange of 26mm each with clips of 10.5mm fixed to the intermediate channel at 457mm length adjusting level fixed to roof slabs bymeans of ceiling cleats made out of GI flate 40x30mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including two coats of distemper over false ceiling board complete for all heights as per specifications and as directed by Engineer-in-charge. |
| 24 | S & F Factory made single extruded WPC (wood polymer composite) solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (suspension grade), calcium caronate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum nd screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , odulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category of being termite / borer proof, water / moiture proof and fire retardant and fixing with stainless steel butt hinges of required ie with necessary full body threaded star headed counter sunk SS screws, all as per direction of engr-in-charge complete all as directed |
| 25 | S & F Factory made single extruded WPC (wood polymer composite) solid door/window/ceosetory windows & other frames/chowkkat of size 45x85 mm comprising of virgin polymer of K value 58-60 (suspension grade), calcium caronate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mmiter joints after applying PVC solvent cement and screwed with full dody threaded star headed SS screws having minimum density of 650 kg/cum nd screw withdrawal strength of 2200 N (face) & 1100 N (Edge), minimum compressive strength 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of class A category of being termite / borer proof, water / moiture proof and fire retardant and fixed in positin with suitable MS hold fast /lugs/SS dash fasteners f required dia and length complete, all as per direction of engr-in-charge complete all as directed |
| 26 | S&F for Anodised aluminium barrel tower bolts, 150 mm size stove enamelled black, with bright bolt and fixed |
| 27 | S&F for Aluminium alloy, anodised, sliding door bolt 300mm size with hasp, staple (bolt type) and fixing clips of sheet,cast orextruded sections& fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 28 | S&F for Stainless steel butt hinges 100mm size medium wt fixed with steel nut blots in PVC door frames & PVC shutters. |
| 29 | S&F for Anodised Aluminium handles 150 mm size D type with plate |
| 30 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steelFrame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 31 | Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mmthick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludescost of glass and includes all other connected accessories. Net opening will be measured forpayment purpose.) (A) Area not exceeding 1.00 sqm each |
| 32 | Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each |
| 33 | M&L for 4.80 mm thick plain Sheet glass/ tinted or coloured film as required, ordinary quality and glazing withsecured in wooden beads or snap fit glazinng clips square exc 0.5 sq. m in each pane |
| 34 | M&L for 4.80 mm thick plain Sheet glass/ tinted or coloured film as required, ordinary quality and glazing withsecured in wooden beads or snap fit glazinng clips square exc 0.5 sq. m in each pane |
| 35 | M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 36 | M&L for 18-20 mm thick Black granite stone as in cooking platforms , slabs for oval type WHB,sinks etc & the likes complete laid over 15 mm thick cement sand screed in CM 1:4 incl mirror polishing complete & providing necessary holes for gas pipe / water supply pipes etc . |
| 37 | S&F Solid WPC Hollow Wall Lining designer type printed coloured in strip and channel feather edges inclusive of solvent cement and fixing at site with frame complete all as per specifications complete all as directed. |
| 38 | S&F Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg Aluminium (extruded section) body complete all as directed |
| 39 | M&L for 25 mm thick Cement concrete type B-0 1:2:4 (12.5 mm graded aggregate) as in sub floors etc incl finishing the surface even & rough to receive screeding |
| 40 | M&L for light shade vitrified ceramic tiles, 10 mm thick (square/ rectagular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.72 sqm, (size & shape, shade and pattern as approved by GE), as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles, over & including M&L 15 mm thick screed bed in cement mortar 1:4, complete all as specified and directed. |
| 41 | All as above, but as in skirting over & including M&L 10 mm thick rendering in CM 1:4 complete all as directed. |
| 42 | M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including M&L 15 mm thick screed bed in cement mortar 1:4, complete all as specified and directed. |
| 43 | M&L for Coloured Glazed ceramic tiles digital print series in vertical surface 300x450 mm size 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & including M&L 10 mm thick rendering in CM 1:4 complete all as directed. Note :- The tiles shall be in one or more colour patterns incl highlighters all as approved & directed at site . |
| 44 | M & L for 50 mm thick plain cement concrete 1:3:6, type C1 (using 20 mm graded stone aggregate) as in plinth protection surfaces finished even and smooth without using extra cement including filling the joints by bitumen and sand mixed in the ratio 1:4 by weight complete all as directed. |
| 45 | S&F 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed |
| 46 | S&F 15mm bore CP brass bib cock fancy type screwed for iron pipe or ferrule and fixed complete all as specified and directed |
| 47 | S&F 15mm bore CP brass angular stop cock screwed for iron pipe or ferrule and fixed complete all as specified and directed |
| 48 | S&F 15mm bore CP central hole basin mixer popup waste system with 450mm long copper pipe and brass nuts |
| 49 | S&F 15 mm bore CP cast copper alloy body mixer sink cock with hot & cold mixing valves & casted central spout all as per sample |
| 50 | S&F Health foucet with 1200mm long flexible mild steel tube 80mm dia with wall hook and complete all as specified and as directed and approved by Engineer-in-Charge. |
| 51 | S&F Two way angle cock cromium plated fancy type 15 mm bore /size |
| 52 | S&F white coloured vitreous china, wash hand basin of size 550mm X 400mm flat back with pedestal Including bracket , CP waste coupling ,chain and plug, 2 Nos PVC connection 15 mm size & 45-60cm long & PVC Waste coupling & flexible waste pipe complete all as directed. |
| 53 | S&F Rimless Single Piece EWC (Brand-I) Size: 395x710x730 mm, with UF Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories and Accessories Set,etc complete, S Trap- 300 mm, complete all as specified and as directed. |
| 54 | S&F Vitreous china urinal full stall type of size 750 mmx395mm x 365mmwith including urinal spreader, coupling, suitable PVC waste pipe etc and providing & fixing of plugs bedding against wall in cement mortar 1:2 pointing around urinal back in cement mortar complete all as specified. |
| 55 | S&F Stainless steel sink with draining board,made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as directed incl taking out & removal of old sink arrangement . |
| 56 | S&F Stainless steel plate rack of size 30\\"x24\\"x10\\" size as per trade pattern fabricated with 0.50mm thick stainless steel sheet suitable for stacking 15 plates with hooks /fittings complete all as per sample . |
| 57 | S&F Corner Glass shelf 250mm superior quality with CP tubular framing & brackets complete all as per sample. |
| 58 | S&F WHB Glass shelf 300mm superior quality with CP tubular framing & brackets complete all as per sample. |
| 59 | S&F 600mmx750mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 60 | S&FTubular towel rail 20mm dia brass chromium plated `D' type 60cm long with bracket and fixed complete all as directed |
| 61 | S&F PVC (SWR) pipes 110 mm single socketed, in any length with solvent cement joints fixed to walls incl stack clamps of 50mm x 3 mm MS flat iron with bolts & nuts. |
| 62 | M&L PVC (SWR) Nahani/floor trap, with CP grating including joining to waste pipe fixed in cement concrete type B-1 (1:2:4) 75 mm dia complete all as specified. |
| 63 | S&F PVC (SWR) 110mm bore pipes single socketed in any length witlh rubber ring joints laid in trenclhes or in floors all as spd |
| 64 | S&F PVC (SWR) 75mm bore pipes single socketed in any length witlh rubber ring joints laid in trenclhes or in floors complete all as specified. |
| 65 | S&F PVC (SWR) bend 110mm dia radius complete all as specified. |
| 66 | S&F PVC (SWR), junction single, (Single T) equal or unequal 110 mm bore |
| 67 | S&F PVC (SWR) bends with access door of radius 75mm dia |
| 68 | M&L for Cutting into existing manholes for connecting new drain pipe and making good to pipe and rendering cutting out existing benching for and forming branch (1/2type B-1 smooth finished, and reforming benching as required] round or 3/4th Section) in cement concrete 1:2:4 channel |
| 69 | M & L for 15 mm GI tubing, medium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors |
| 70 | M & L for 20 mm GI tubing, medium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors |
| 71 | S&F rotational moulded polyethylene water storage tanks triple layer white colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified cap 1000 ltr including suitable tank nipple etc complete all as directed. |
| 72 | S&F Ball valves 20 mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s .) all as specified & directed. |
| 73 | Preparation of new external wall surfaces by Brooming down or steel wire brushing, scrapping down mass and efflorescent salts and trading oil & greasy spots, washing rubbing down and stopping distempered surfaces and M&L for applying two coat of exterior acrylic emulsion (apex or equivalent) of approved quality & tint on walls over two coats of wall putty , sand papering the same & making good to depressions if any to obtain totally smooth surfaces as spd and as directed by Engineer-in Charge. |
| 74 | Preparation of New surfaces by Brooming down or steel wire brushing, scrapping down mass and efflorescent salts and trading oil & greasy spots, washing rubbing down and stopping distempered surfaces and M&L for applying two coats of oil bound distemper (of approved quality & tint) on walls over two coats of wall putty , sand papering the same & making good to depressions if any to obtain totally smooth surfaces all as spd and as directed by Engineer-in Charge. |
| 75 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand;complete. |
| 76 | M&L Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete. |
| 77 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, as in soft/loose soil complete all as specified & directed. |
| 78 | M&L for PCC 1:3:6 Type C-2 (using 40mm graded stone agg) as in foundation filling and mass concrete complete all as specified & directed. |
| 79 | S&F Mild steel work as in hand rails, half round or other section, balusters running bars, nosing to steps, wind ties, posts and struts in fencing incl cutting tops to shape as required, drilling holes , noching for wire , flat iron fillets for securing wiremesh etc., incl all necessary drilling, bolting or riveting etc & similar work conforming to Fe-290 Gde E-165 and all as specified. |
| 80 | S&F mild steel round bars 10mm dia cut to length, bent to shape required, including cranking, bending spirally for hooking ends and binding or welding as required and fixed in fencing confirming to Fe 410-W or Fe 290 complete all as specified. |
| 81 | S&F 5 to 10mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long |
| 82 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire |
| 83 | Supply only MS galvanisd chain link fencing / wire mesh of size 50mmx50mm made of 4mm dia of plain GI wire complete all as specified. |
| 84 | M&L for Preparing new steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tintsurfaces and applying two coats of synthetic paint over and including one coat of red oxide primer complete all as directed |
| 85 | M&L for PCC 1:2:4 type B-2 (using 40mm graded stone agg) as in surface channel bed in manholes all as specified laid to slope and finished surface even and smooth complete all as specified & directed. |
| 86 | Brick work with old size sub class 'B bricks straight or curved on plan exc 6 metre mean radius built in cement mortar (1:6). |
| 87 | M & L 15mm thick rendering in CM ( 1 : 4 ) on fair faces of brick walls or concrete surfaces etc. and finished even & smooth without using extra cement complete all as specified. |
| 88 | M & L 15mm thick rendering in CM ( 1 : 4 ) on other than fair faces of brick walls or concrete surfaces etc. and finished even & smooth without using extra cement complete all as specified. |
| 89 | M&L for PCC 1:4:8 Type D-2 using 40mm graded crushed stone aggregate as in concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested all as specified and shown on drgs for 150mm dia complete all as specified & directed. |
| 90 | M&L for Reinforced concrete pipes, class NP 2 with one collar per length of pipe 200mm internal dia laid in trenches jointed im CM 1:1 and tested complete all as specified & directed. |
| 91 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement incl forms moulds, mitered/stopped ends etc. complete all as specified & directed. |
| 92 | M&L for pre cast RCC cover slab for manholes Type B-1, 1:2:4 (using 20mm grade stone agg) set in cement mortar 1:6 complete all as specified & directed ( Reinforcement shall be measured & paid separately) |
| 93 | Construction of soakage wells exc, in ordinary soil, fdn in PCC 1:3:6, wells of honey combed and solid in M-25, concrete, including intercepting chamber screen chamber brick work in CM, RCC cover slab in M-25/ RR Masonry/Filling with brick bats complete of size 3.0x4.5m |
| 94 | M & L for Point wiring for One light/ fan point controlled by one way switch 5 amp with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, 1100 volts grade copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases (making good all to the disturbed surfaces as per existing) including with modular flush metal boxes with modular cover plateS&Frame for mounting modular switches, sockets, regulators etc and including earth wire of PVC insulated (FRLS) copper conductor multistranded of 1.5 Sqmm size in green colour complete all as specified in current SSR Part-I & II & directed by the Engineer-in-Charge |
| 95 | All as per item No. 94 but for One 3 pin 5 Amps socket point controlled by one way switch on same board. |
| 96 | All as per item No. 94 but for One 3 pin 5 Amps socket point controlled by one way switch on independent board. |
| 97 | All as per item No. 94 but for One bell point controlled by one push button |
| 98 | All as per item No. 194 but for 3 pin / 5 pin 16 Amps sockets outlet with 4 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent Point wiring complete all as specified and as directed . |
| 99 | S&F ceiling rose, PVC / Polycarbonate, isolated body 65mm x 50mm three terminals complete. |
| 100 | S&F Modular switch 6 Amps single pole one-way, 1 Module complete. |
| 101 | S&F Modular switch 16 Amps single pole one-way, 1 Module complete all as specified. |
| 102 | S&F Modular socket 2-in-1, 5 pins 6 Amps, combined 2 Module complete. |
| 103 | S&F Modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete. |
| 104 | S&F stepped type electronic fan reglator, 120 Watt, 2 Module complete all as specified. |
| 105 | S&F Modular bell push switch 6 Amps with indicator single pole one-way 1 Module complete all as specified. |
| 106 | S&F lamp holder, PVC / polycarbonate type with back plate suitable for batten. |
| 107 | S&F LED 9W suitable for normal holder (Base Cap B22) complete all as specified. |
| 108 | S&F Call bell ding dong AC 230 Volt, single pole complete all as specified. |
| 109 | Supply & fixing indoor decorative ultra slim surface /Wall mounted LED batten tube light complete fitting 1x 20 watt LED Tube fitting with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts, co- related colour temperature (CCT) of 6500K, >100 Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge. |
| 110 | Supply & fixing LED light fitting mirror type withhight output diffuser 2 feet, 10 warr 220 V AC decorative type with driver holder and LED lamp incl connecting up with threee core flexible copper conductor cable of suitable size complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge. |
| 111 | Supply and install of 35 W LED building security light fitting with lens & driver, powder coated pressure die cast aluminium, top opening and maintainable with heat resistance toughened glass, built-in Short-Circuit Protection, Over voltage Protection and Surge Protection, IP-65 proction with luminaire efficiecy of greater than 80Lumen/Watt, Colour rendering (CRI) of ≥ 70 and co- related colour temperature (CCT) of 5700K (±500K) . The luminaire should have 10 KV surg protection, PF ≥ 0.9 and total harmonic distortion of THD ≤ 10%, voltage range of 140-280V including all connections complete all as specified. |
| 112 | M&L for building security light bracket made out of 40mm dia light grade GI pipe of 1.2 m length bent to required shape suitable for fixing street light fitting on Steel tubular pole/wall including two Nos clamps made out 40mm X 6mm flat with suitable nuts and bolts including two coats of aluminium paint over a coating of red oxide primer complete all as directed taking down old unserviceable bracket as scrap any size / description. |
| 113 | Supply & fix in repair recess type, 35/36 watt LED panel light (600x600 mm) complete with fittings integrated electronic driver,energy efficient, 230 volts,co- related colour temperature (CCT) of 6500K, complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge. |
| 114 | S&F MCB distribution board, SPN 12 way, Double door, sheet steel, phosphatised, powder painted with Copper bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V complete all as specified. |
| 115 | All as per Item No 114 but for 8 Way |
| 116 | All as per Item No 114 but for 4 Way |
| 117 | S&F powder coated CRCA steel sheet MCB distrbution board, IP-43 IK-09 protection, double door recess mounted, TPN 4 way complete. |
| 118 | S&F 415V 10KA 'C' curve miniature circuit breaker (MCB), TPN 40-100 Amps, complete with connection (Note 100 Amp 3 Nos, 63 Amps 2 Nos) |
| 119 | S&F MCB SPN 32 Amps,' C' series , bracking cap 10KA, 240V complete. |
| 120 | S&F MCB SPN 40-63 Amps,' C' series , bracking cap 10KA, 240V complete. |
| 121 | S&F MCB SP 6-32 Amps, ' C' series ,bracking cap 10KA, 240V complete. |
| 122 | S&F MCB SP 40 Amps,' C' series , bracking cap 10KA, 240V complete. |
| 123 | M & L for Sub Main Wiring wiring with two runs single core 4 Sqmm PVC insulated unsheathed (FRLS) cable, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) with and including 4 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge.(Note: Two runs of 4 Sq mm (P&N), one run of 4 Sq mm earth wire & One run of PVC casing and caping will be measured as one RM). |
| 124 | M&L for Sub Main Wiring for DB to DB with two runs single core 10 Sqmm PVC insulated unsheathed (FRLSH) cable with stranded copper conductor drawn in suitable size of rigid non-metallic PVC conduit and its all accessories complete concealed in wall/roof with and including 10 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge.Note - 02 run 10 Sq mm single core cable, one run of 10 Sq mm earth wire & One run of PVC conduit will measured as one RM. |
| 125 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V,1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed by Engr-in-charg |
| 126 | S&F exhaust fan, steel body AC single Phase 230V of size 300mm sweep with blades, and frame and louvers complete all as specified and as directed. |
| 127 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as specified and as directed. |
| 128 | Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one Single pole MCB 20 amp complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 129 | Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one Single pole MCB 20 amp complete all as specified and as directed. Please Enable Macros to View BoQ information |
