|
| 1 | Taking down cement plaster on brick/stone walls etc including raking out joints, hacking for key, scrubbing down with water complete. |
| 2 | M&L for 15mm thick rendering in CM 1:6 on fair faces of brick masonry finished fair and even complete all as specified. |
| 3 | M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:4 with WPC and to be finished even and smooth without using extra cement in patches complete all as specified and directed ( WPC compound shall be measured and paid separetely) |
| 4 | M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed.Note : Liquid WPC will be measured and paid separately. |
| 5 | M&L preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of chalk whitining complete all as specified and directed. |
| 6 | Demolition of cement conc. (Unreinforced) in ground floor n exc 15 cm thick |
| 7 | M&L for 25 mm thick cement concrete type B-1, 1:2:4 using 12.50mm graded stone aggregate as in sub-base. |
| 8 | M&L for non skid ceramic coloured joint free tiles 7-8 mm thick area of each tile exceedeing 0.18 sqm but n.exc 0.38 sqm (600x600), as in vertical surfaces such as skirting / dado set and jointed in neat cement slurry and pointed in white cement to over and including 10 mm thick backing in CM (1:4) complete all as specified and directed. |
| 9 | M&L for non skid ceramic coloured joint free tiles7-8 mm thick area of each tile exceedeing 0.18 sqm but n.exc 0.38 sqm (600x600), in floors, set and jointed in neat cement slurry and pointed in white cement to over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 10 | M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.11 sqm and not exceeding 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 11 | Material and labour for Glazed ceramic tiles of size 350x 250x 7mm/ 450X 350X 7mm thick in vertical surfaces such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 all as specified |
| 12 | M&L for Vitriefied tiles 10mm thick LIGHT SHADE (square/rectangular) polished area of each tiles not exceeding 0.36 sqm in patches including 15mm thick screed bedding layer in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile complete all as specified. |
| 13 | M&L for coloured chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors including 15 mm thick screed bed in CM 1:6 for laying floor finish complete all as specified and all as direcred. |
| 14 | Taking down chowkat or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each complete all as specified and directed. |
| 15 | Taking down chowkats or frames exc 1.50sqm but n exc 4 sqm with shutter (without taking off shutters from the frames). |
| 16 | S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded. |
| 17 | S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded. |
| 18 | 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed (172774.30 /2) |
| 19 | 2nd class HW 35mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20; supplied and fitted to chowkats ( 3742.1/2 ) |
| 20 | S&F 35mm thick flush shutters, solid core construction with block board core and plywood face panels commercial type on one face and other side covered with decorative face veneer with liping/frame to match complete all as specified. |
| 21 | S&F, 1mm thick wood grain printed PVC sheet fixed or laid on to flush doors by using rubber used adhesive, supplying & fixing at site as per specification |
| 22 | S&F, Aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 23 | S&F, Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete |
| 24 | S&F 100 butt hinges extruded aluminium alloy with galvanised mild steel hinges complete. |
| 25 | Aluminium handles cast type anodised of 150mm complete. |
| 26 | S&F aluminium, anodised, barrel tower bolts of extruded section 150 mm long complete all as specified and directed. |
| 27 | S&F in repair 18 mm thick ply , PVC sheet coloured Prelaminated on one side with approved texture (\\"Celuca ply of Rajshree make or equivalent in \\"sintex\\" as approved by GE) as in kitchen cabinet ( with shelves and partition ) including necessary fittings & fixtures as per manufacture's instrucions complete all as specified and directed |
| 28 | S&F continuous (Piano) hinges,mild steel, bright finish or electro galvanised width of flaps (when open) 30 mm complete all as specified and directed. |
| 29 | S& F for Solid PVC moulded door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening but single prelam PVC sheet used instead of Plain colour PVC sheet as per specification & drawing complete all as specified and directed. |
| 30 | S&F, Factory Made Solid PVC Moulded Door Shutters with wood free EPS 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 31 | S&F Anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 32 | S&F Anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. |
| 33 | Anodised aluminium powder coated sliding three track window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 34 | Taking down steel tubing and connections including cleaning for refixing or removal from site for 15mm bore pipe all as specified and directed by Engr-in-charge. |
| 35 | Taking down steel tubing and connections including cleaning for refixing or removal from site for 20mm bore pipe all as specified and directed by Engr-in-charge. |
| 36 | Taking down steel tubing and connections including cleaning for refixing or removal from site for 25 mm bore pipe all as specified and directed by Engr-in-charge. |
| 37 | S&F 25mm bore tubes medium grade galvanized with all fitting such as socket, elbow, Tee tee, union and short length etc. and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-charge. |
| 38 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors for 20mm bore of pipe including Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor and all necessary fittings etc complete all as specified and directed. |
| 39 | Dismantling water tanks capacity exc 250 Ltr and n exc 500 Ltr and removing from site all as specified and directed by Engr-in-charge. |
| 40 | S&F rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) capacity 500 Ltr hoisted and fixed in position all as specified and directed by Engr-in-charge. |
| 41 | S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and directed. |
| 42 | S&F in repair gunmetal, globe or gate valve for 20 mm bore pipe with iron wheel head, screwed both ends for iron pipe all as specified and directed by Engr-in-charge. |
| 43 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. |
| 44 | S&F in repair PVC low level flushing cistern of capacity 10 litres complete with siphon handle, lever, float valve and PVC bend including connecting to ITWC/ ETWC, PVC connection 450 mm long and fixing on wall bracket complete all as specified and directed by Engr-in-charge. |
| 45 | Stainless steel plate rack, 0.56mm thick of standard pattern, 31”x36” size including fixing to wall with 4 Nos 50mm long screws & PVC rawl plugs complete all as specified. |
| 46 | S & F Door Seal rubber etc, complete all as specified |
| 47 | S&F in repair 5 mm thick looking mirror 600 x 450 mm selected quality glass mounted on 6 mm thick commercial plywood, with aluminium beading and fixed to wall with brass screws, cups and washers complete as specified and directed. |
| 48 | S&F in repair vitreous China squatting pan of pattern Orissa Pattern , size 580 x440 mm white with P or S trap , front or backinlet and integral foot rests any pattertn (excl flushing cistern and flush pipe) complete incl provn of lime concrete bedding connection to flush pipe , trap etc & making good complete all as specified and directed (Make: PRAYAG / CERA/ Parryware).. SI- 18306 (1819.09) + SI - 18248 (850+300) = 2969.09 |
| 49 | S&F vitreous china wash basin white flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets, PVC connections 450 mm long all as specified and directed by Engr-in-charge. |
| 50 | S&F in repair brass chromium plated shower rose 125 mm size with or without swivel joint complete all as specified and directed. |
| 51 | S & F in repair 15 mm bore brass chromium plated Wall Mixture three in one including Provn of OH shower fancy type screwed down to GI pipe with CP brass cup complete all as specified and directed. |
| 52 | S & F in repair 15 mm bore brass chromium plated Wash Basin Mixture for hot & cold water with long shank and fly nut complete all as specified and directed. |
| 53 | S & F in repair 15mm bore brass chromium plated stop cock/angle cock fancy type long body with CP brass cup and screwed down to GI pipe complete all as specified and directed. |
| 54 | S&F in repair 15mm bore bib tap fancy type chromium plated long body cast copper alloy screwed down for iron pipes or for brass ferrule complete all as specified and directed by Engr-in-charge. |
| 55 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples beads or in steel/wooden window complete all as specified and directed by Engr-in-charge. |
| 56 | S&F for galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed. |
| 57 | S&F Soap Dish,Chromium plated fancy type with brass screws and wooden/plastic cleats complete all as specified and all as directed. |
| 58 | S&F 3mm thick sheet glass ordinary quality and galzing with oil putty or wooden beads in squares of any size complete all as specified and directed by Engr-in-charge. |
| 59 | S&F 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqmtr each pane complete all as specified and directed by Engr-in-charge. |
| 60 | M&L for 5.50mm thick sheet glass, ordinary quality in squares exceeding 0.50 SqM in each pane fixed to aluminium frame complete all as specified and directed. |
| 61 | S & F for CP Towel Ring of Prayag or equivalent as approved by GE fixed in repairs |
| 62 | S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed. |
| 63 | Brushing neat cement slurry with 3.0kg of cement per sq. metre all as directed. |
| 64 | M & L for Granite (Zed Black/Ruby Red ) work (table rubbed and polished) 20 mm thick in cooking platforms incl edge moulding & cutting holes for gas pipe through drill machine and jointed with grey cement slurry and pointed to match the shade of granite stone including grinding and polishing fixed over and including screed bed 15 mm thick in CM 1 : 6 etc all complete. |
| 65 | M & L for 20mm thick Granite (zed Black) work (table rubbed and polished) in cooking platforms including bedded in CM 1:4 and jointed with grey cement slurry and pointed to match the shade of granite stone in patches etc complete all as specified and as directed. |
| 66 | M&L for rounding to edges of granite stone slabs one edge, such as in cooking platform, and other similar situations all as specified and as directed. |
| 67 | M&L for machine cut cudappa stone slab 20 to 25 mm thick over and including cement screed base 15mm thick in CM 1:6 in floors laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed . |
| 68 | Taking down of eves gutter,rain water pipes ,AC/PVC pipes of any size or pattern including all fittings etc complete all as specified and directed. |
| 69 | S&F, PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed. |
| 70 | S&F, in repair PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed. |
| 71 | Supply, laying and jointing 200mm nominal bore dia DWC ( HDPE double wall corrugated), socketed and sewage pipes having 6.0 mtr length, conforming to IS-16098 (Part-2) of SN-4 stiffness with and includung necessary jointing materials etc complete all as specified and directed. Make:- Ultra plus of make Supreme or equivalent brand , Kisan Mouldings Pvt ltd or fenotex or Durtonor Kaveri as approved by GE. |
| 72 | M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 200 mm bore of pipe with cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate complete all as specified and directed. |
| 73 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches , in floors or walls of 110 mm bore of pipe etc complete all as specified and directed. |
| 74 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches , in floors or walls of 75 mm bore of pipe etc complete all as specified and directed |
| 75 | M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in surface channels and drains complete all as specified and directed. |
| 76 | Supply only Integral water proofing compound complete |
| 77 | M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed. |
| 78 | S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed. |
| 79 | S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed. |
| 80 | S&F in repairs PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed |
| 81 | S&F in repairs PVC (SWR) junction single, (single T) equal or un equal of 75 mm bore of pipe complete all as specified and directed |
| 82 | M&L 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in floor sub base and finished even and fair complete all as specified and directed. |
| 83 | M&L for Cement concrete 75mm thick as in sub base type D- 2, 1:4:8 (40mm graded aggregate) |
| 84 | M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate, 75mm thick in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed. |
| 85 | M&L for PCC 1:2:4, type B-1 using 20 mm graded stone aggregate as in coping, benching, bed block, lintel band, plinth courses etc and similar work including necessary form work complete all as specified and directed. |
| 86 | M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 complete all as specified and directed. |
| 87 | M&L for TMT Mild steel bars 10mm dia and over , cut to length, bent to shape required including cranking, placing and binding with mild steel wire ( annealed less than 0.90 mm dia.) |
| 88 | M&L for Mild Steel TMT bar 8 mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete. |
| 89 | M&L Fromwork to Soffiting of Suspended slab such as roof slab,floor slabs landing and similar work not exceeding 200 mm thickness as directed by Engr-in-Charge |
| 90 | M&L for Complete removal of existing water proofing treatment from roof and providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing memberane comprising of the following for Non approachable roofs-(i) Cleaning and sweeping and washing down with water to remove all dust etc from plastered roof surfaces / walls and filling of crack with sealing compound etc (ii) Bituminous based primer conforming to IS: 3384 – 1965 @ 0.3 Kg/Sqm (iii) One layer of super thermo APP modified water proofing memberane with non polyester reinforcement of any make.( M/s STP texsa ltd/Hyperplas memberane of M/S IWL India ltd/MS STPand Tikki Tar ltd). (iv) 3mm thick and minimum Weight @3.50Kg/Sqm,laid with gas torch and pasted on roof surfaces with roller. The over laps shall be sealed by flame including vertical surface after cutting necessary grooves and making good with PCC gola 1:2:4 type- B1 etc adhere to bitumen all as per manufactures instructions. (v) Applying one coat of aluminum paint @ 0.20 Kg / Sqm in two coats over bitumen layer as per manufacturer instruction . (application including sides lap,over laps shall be provided not less than 10 cm and joint sealed with torch as per manufactureerr's instructions specifications and as per particular specifications complete all as specified and directed. |
| 91 | M&L for 10mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound @ 3% by wight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and direcated (WPC shall be measured & paid seperately) |
| 92 | S&F fancy type draphery rods with two way wooden/brass brackets 20-25mm bore cut to length as reqd of colour as selected , approved by GE & as directed by Engr-in -Charge. |
| 93 | S & F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 |
| 94 | Demolition of stone/brick masonry built in CM or cement/ lime mortar. |
| 95 | M&L Brick work using fly ash bricks having crushing strength not less than 75 Kg/Sqcm bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed. |
| 96 | M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed. |
| 97 | Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in Modular bricks in cement mortar 1:6 |
| 98 | Dismantling of Stone slabs and tiles of any description or thickness floors, aprons etc complete and removing debris from the premises. |
| 99 | M & L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface |
| 100 | M&L for 100 mm thick Cement concrete type D-2, 1:4:8 , using 40 mm graded stone aggregate as in sub base. |
| 101 | M & L Machine pressed coloured precast concrete rubbber moulded interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade. |
| 102 | M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 103 | Cutting holes in brick walls, Exc. half brick but not exc. one brick in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required |
| 104 | S&F PVC connection 15mm size with brass nuts of length 450mm all as specified and directed by Engr-in-charge. Make:- Symet/ Prayag |
| 105 | S&F Chromium plated mild steel hat pegs, solid body, 175mm to 250 mm |
| 106 | M & L preparation of new steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer. |
| 107 | M&L for prepartion Surfaces of new wood or wood based materials of any description not other described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed |
| 108 | M&L preparing old wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 109 | M & L for preparation of old painted steel surfaces of any description over 10 cm in width or girth not otherwise described and applying one coats of synthetic enamal paint complete all as specified and directed. |
| 110 | Preparing new steel surface and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engre-in-charge. |
| 111 | M & L preparation of New plastered wall surfaces and applying 1 mm thick wall care putty to get smooth and even surfaces as directed and applying two coats of oil bound distemper over resistant priming paint complete all as specified and as directed by Engineer-in-charge. |
| 112 | M & L for complete removal of existing treament and preparation of old plastered wall surfaces and applying 1mm thick wall care putty to get smooth and even surfaces as directed and applying two coats of oil bound distemper complete all as specified and as directed by Engineer-in-charge. |
| 113 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and directed. |
| 114 | M&L for removal of old painted surface applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces. complete all as specified and directed. |
| 115 | Preparation of old surfaces of ceiling and applying two coats of white wash complete all as specified and directed. |
| 116 | Prepration of newly plastered surfaces and applying three coat of white wash on ceiling all as specified. |
| 117 | S&F Floor door stopper of cast aluminium alloy body and tongue anodised with double leg ,fixed in floor complete Please Enable Macros to View BoQ information |
| 118 | S&F Floor door stopper of cast aluminium alloy body and tongue anodised with double leg ,fixed in floor complete Please Enable Macros to View BoQ information |
