|
| 1 | M&L for Rendering 15 mm thick on of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), including taking down cement plaster complete all as specified and directed. |
| 2 | M&L for Rendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), including taking down cement plaster complete all as specified. |
| 3 | M&L for Rendering 15 mm thick on of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:6), including taking down cement plaster complete all as specified. |
| 4 | M&L for repairing of RCC projection chhajjas, roof, facia etc by necessary preparation. Scraping cutting, chiselling derusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC with cement concrete (1:1.5:3) using 20mm graded stone aggregate and reinforcement with welded mesh of weight 2 Kg per Sqm but n.exc 3 Kg per Sqm (if reqd) with or without facia and finished with cement and sand mortar (1:3) using coarse sand and work in patches area n.exc 5 Sqm and thickness of RCC member n.exc 70mm incl necessary formwork and applying two coats of finishes to match with the existing surfaces at any height complete all as specified and as directed by Engr-in-Charge. (The rate quoted by the contractor shall included for scaffolding and necessary formwork upto triple storey bldg). |
| 5 | M & L for two coats of interior acrylic distemper on new ceiling surfaces, including preparation of surfaces complete all as specified . |
| 6 | M&L for preparation of plastered or un plastered old decorated ceiling surfaces and applying one coat distemper oil emulsion white or coloured by auto roller complete including removal of nails etc and grinding where necessary complete all as specified & directed by Engineer-in-Charge. |
| 7 | M&L for preparation of new plastered wall surfaces complete all as specified and applying the following: -(a) Applying wall care putty upto 2mm thick as required on wall surfaces, (preparatory to paint as directed), complete all as specified. (b) Priming plastered or un-plastered surfaces of walls with alkali resistant priming paint, complete all as specified.(c) Two coats oil emulsion distemper white or coloured on wall surfaces |
| 8 | M&L for complete removal of existing treatment of any description, including preparation of wall surfaces of any description, complete all as specified and applying the following: -(a) Applying wall care putty upto 2mm thick as required on wall surfaces, (preparatory to paint as directed), complete all as specified. (b) Priming plastered or un-plastered surfaces of walls with alkali resistant priming paint, complete all as specified.(c) Two coats oil emulsion distemper white or coloured on wall surfaces complete all as specified and directed. |
| 9 | M&L for preparation of new plastered wall surfaces of any description complete all as specified and applying the following: -(a) Applying wall care putty upto 2mm thick as required on wall surfaces, (preparatory to paint as directed), complete all as specified. (b) Priming plastered or unplastered surfaces of walls with alkali resistant priming paint, complete all as specified.(c) Two coats exterior acrylic emulsion paint white or coloured on wall surfaces complete all as specified and as directed |
| 10 | M&L for complete removal of existing treatment of any description, including preparation of wall surfaces of any description, complete all as specified and applying the following: -(a) Applying wall care putty upto 2mm thick as required (multi purpose mixer shall be used for uniform and proper mixing of putty) on wall surfaces, (preparatory to paint as directed), complete all as specified., (preparatory to paint as directed), complete all as specified. (b) Priming plastered or unplastered surfaces of walls with alkali resistant priming paint by auto roller/ spray machine, complete all as specified.(c) Two coats exterior acrylic emulsion paint white or coloured by auto roller/ spray machine on wall surfaces |
| 11 | M&L for preparation of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. |
| 12 | M&L for Preparation of new wood & wood based surface and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed . |
| 13 | M&L for preparation of old painted Concrete/plastered surface (Kerb Stone) of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. |
| 14 | M&L for preparation of old painted surfaces of steel & steel based surface of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. |
| 15 | M&L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of red oxide primer complete all as specified and directed by Engineer in charge. |
| 16 | M&L for writing letters or figures by specialist / professional painter (Block, Roman, Italic or Indian) with thick black synthetic enamel paint not exc. 10cm height on white base complete all as specified and directed. |
| 17 | S & F in repair uPVC pipes,160 mm external dia pipe, type-A, ISI marked (IS:13592) single socketed in any length with or without rubber ring joints, fixed along walls with clamps as RWP complete. |
| 18 | S&F in repair uPVC bend/Shoe, 160 mm external dia type-A, ISI marked any radius, complete all as specified and directed. |
| 19 | M&L for Uprooting tree/plants upto 30 cm girth from wall or any part of building upto double storey buildings completely to the entire satisfaction of Engineer-in-Charge, making good the disturbed portion and filling holes in cement mortar (1:3) or PCC (1:2:4) type B-1 using 20mm graded stone aggregate to match with existing surfaces and removal of rubbish outside MOD land complete all and specified and directed. |
| 20 | M&L for Granite 15-18mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including 20mm thick screed bed in CM (1:6) for laying of Granite slab& pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 21 | M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified. |
| 22 | M&L for 75 mm thick, plain cement concrete (1:3:6), type C-2, (using 40 mm graded mechanically crushed stone aggregates), laid in 1:20 slope as in plinth protection including making joints at 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/ 25 & two parts heated sand (by volume), surface finished even and smooth without using extra cement, complete all as specified and as directed.Note: The concrete shall be laid at a stretch not exceeding 3 metre in length and width of joint shall not be more than 12 mm. |
| 23 | S&F Pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc and applying a shop coat of red oxide primer including providing PCC 1:3 :6 type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified and as directed by the Engineer-in-Charge |
| 24 | S&F Pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc and applying a shop coat of red oxide primer including providing PCC 1:3 :6 type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified and as directed by the Engineer-in-Charge |
| 25 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 100 x 50 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and as directed . |
| 26 | M&L for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 125 x 50 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). →Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and as directed . |
| 27 | M&L for factory made single extruded WPC (Wood Polymer Composite) solid door/ window /Ceosetory windows & other Frames/Chowkhat of size 62x32 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gm) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/Cu.m, screw withdrawal strength of 2200N Face & 1100 N (Edge), minimum compressive strength of 58 N/ Sq.mm, modules of elasticity 900 N/Sq.mm and resistance to spread of flame of Class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed |
| 28 | S & F for flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, thickness 30 mm etc complete all as specified and directed. |
| 29 | S & F for 2nd class HW rail and style, thickness of shutters,35 mm, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specified and directed. |
| 30 | S & F 35 mm,2nd class hard wood factory made, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a);,etc complete all as specified and directed. |
| 31 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain Glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary Screws shall be paid separately) |
| 32 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary screws shall be paid separately) |
| 33 | Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge |
| 34 | S&F Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 35 | Steel windows made of MS sheet 1.25 mm thick box type (primer coated) ERW hollow ‘P’ section of size 60 mm x 25 mm single rebate comprises of skeleton shutter ERW sec 50 x 20 mm & 1 mm thick & openable leaf consisting two Nos sash bars of ‘T’ section 20 x 3 mm complete welded to frame including cutting holes & making good dismantled portion in PCC 1:2: 4 type B1 four Nos for each window including following fitting welded to shutter ;- (a) Hold fast 150 mm long 12 mm x 3 mm made to shape -04 Nos(b) Handle of ‘Z’ section 20 x 25 mm , 100 mm long 01 Nos each leaf.(c) MS tower bolt 150 mm long 02 Nos each leaf.(d) ‘Z’ section 20 x 25 mm , 100 mm stopper-01 Nos each leaf.(e) Cleat 55 mm long of hollow square 15 x 20 x 63 mm welded to hinges-01 Nos per leaf.(f) MS box type hinges of size 75 x 12 mm -02 Nos per leaf.(g) Fabrication & fixing complete all as specified and directed |
| 36 | All as per item above here-in-before but with out sash bars |
| 37 | S & F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed |
| 38 | S&F Powder Coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 39 | S&F powder coated (minimum thickness of coating 50 micron) aluminium three track sliding windows with frame and shutters ( without sash bars) and frame having three shutters - two glazed & one gauged with & including 5.5 mm thick tinted glass, stainless steel wire cloth, locking arrangement & handle (s) , aluminium , snap beading, jointing cleats, glazing clips, rubber packing rollers etc. complete comprising the following : Window frame size 100.00mm x 40.00mm x 1.50mm, vertical rail section 90 x 25 x 1.5mm, , top rail of shutter 40 x 25 x 1.5mm, bottom rail of shutter 40 x 25 x 1.5mm, including glazing clips, 5.5 mm thick tinted glass in two shutters and stainless steel wire cloth in 1 Nos shutters , including necessary drilling. fixing, screws Locking arrangements etc complete all as specified and as directed. |
| 40 | S&F Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) |
| 41 | M&L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; frame structure; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed |
| 42 | S & F for Stainless steel wire cloth,0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, etc complete all as specified and directed. |
| 43 | Supply and Fix 4 mm thick Sheet glass, ordinary quality, in squares n exc 0.5 sq. m each pane, etc complete all as specified and directed |
| 44 | Supply and Fix for 4 mm thick Figured glass, pin head type in squares n exc 0.5 sq.m each pane etc complete all as specified and directed |
| 45 | Supply and fix 4 mm thick Sheet glass, ordinary quality, in squares n exc 0.5 sq. m each pane etc including hacking out old broken glass complete all as specified and directed |
| 46 | S&F 5.0 mm thick Toughened glass as in hinged doors, Upvc windows/ Door, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed |
| 47 | M&L for 9mm thick Pre-laminated particle board, interior grade, pre-laminated both sides with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 48 | S & F Factory made solid PVC Door frame of size 50mm x 47mm made out of 5mm thick wood grain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening, complete all as specified and directed |
| 49 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and a gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site all as specified in SSR part-II 2004 Section-8, clause 8B.1 to 8B.2.1 and shown on drawing in page No 146 of SSR part-II 2004 complete all as specified and directed |
| 50 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 18mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (Wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gm) having minimum density of 650 kg/Cu.m and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50N/Sq.mm, modulus of elasticity 850 N/Sq.mm and resistance to spread of flame of Class A category with property of being termite/borer proof, water / moisture proof and fire retardant and fixing complete all as specified and directed. |
| 51 | S & F Continuous (piano) hinges, 30mm width of flap mild steel, bright finish or electro galvanised complete all as specified and directed. |
| 52 | S & F for 250 mm long , Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, etc complete all as specified and directed. |
| 53 | S & F for stainless steel Butt hinges of size 75 mm, etc complete all as specified and directed.. |
| 54 | S&F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed. |
| 55 | S&F 125 mm size, aluminium anodized handles, cast type complete all as specified and directed. |
| 56 | S&F 75mm Aluminium handles, cast type, anodised complete all as specified and directed. |
| 57 | S & F 300 mm long mild steel ordinary rat tail rod pattern door spring including roller and roller plate fixed in repairs complete all as specified and directed. |
| 58 | S & F for Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws, Size of hasp and staple in 100 mm, etc complete all as specified and directed. |
| 59 | S & F floor door stopper of aluminium alloy body double leg 75-80 mm long with rubber stopper at bottom complete all as specified and directed. |
| 60 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.50 Sqm each and removing to or from store complete all as specified and as directed by the Engineer-in-Charge |
| 61 | Taking down, Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each but with shutters (without taking off shutters from the frame),etc and removing to or from store complete all as specified and as directed by the Engineer-in-Charge |
| 62 | Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and removing from site complete all as specified and as directed by the Engineer-in-Charge |
| 63 | Notes: Amount of credit for retrieved materials is mentioned in tender documents in pdf form which will be deducted while acceptance of tender offline. Please Enable Macros to View BoQ information |
