|
| 1 | Schedule 'A' |
| 2 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all as specified and directed. |
| 3 | M&L for brick work with subclass ‘B’ bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed. |
| 4 | M & L for brick work with sub class ‘B’ brick straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed. |
| 5 | Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water complete all as specified and directed. |
| 6 | M&L for rendering 15mm thick in CM 1:4 on on fair surfaces of brick in two separate coats (10mm thick backing coat and 5mm thick top coat) using water proofing compound @2% by weight of cement as per manufacture instruction and finishing works/concrete surfaces finished even and smooth complete all as specified and directed.Note : (i) WPC will be measured and paid separately (ii) Rates deemed to be inclusive of scaffolding upto height 12 Mtr at reqd places. No additional payment will be made on this account. |
| 7 | Supply only intergral water proofing compound complete all as specified and directed. |
| 8 | M&L for rendering 10 mm thick on other than fair faces of brick work or concrete surfaces in CM 1:6 finishing even and smooth without using extra cement complete all as specified and directed. |
| 9 | M & L for rendering 5mm thick on fair face of brick work or concrete surface wall or ceiling in CM 1:3 finishing even and smooth without using extra cement complete all as specified and as directed. |
| 10 | M&L for preparation for new or previously untreated plastered surface of walls and applying two coats of cement base paint complete all as specified and directed. |
| 11 | M&L for preparation of surfaces plastered or unplastered new surface on wall and applying two coats of oil bound distemper complete all as specified and directed. |
| 12 | M&L for preparation of surfaces plastered or unplastered new surface on ceiling and applying three coats of white washing complete all as specified and directed. |
| 13 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 14 | Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thick thickness below or above ground level complete all as specified and directed. |
| 15 | M & L for Non skid coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and includig 15 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 16 | M&L for 25mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in levelled course finish even and fair for tile finishes complete all as specified and directed by Engr in Charge. |
| 17 | M & L for Non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engr in Charge. |
| 18 | M & L for Glazed Coloured Ceramic tiles in vertical surface 350x250x7mm / 450x350x7mm thick set and joint in neat cement slury and pointed in white or colour cement to match over and including 10mm thick rendering in CM 1:4 as backing coat to receive tiles complete all as specified and directed. |
| 19 | M & L for Non skid coloured ceramic tiles 7 to 8mm thick of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including rendering 10 mm thick on fair faces of brick work in CM (1:4) for receving vertical dado tiling complete all as specified and directed. |
| 20 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but not exc. 4 sqm each complete all as specified and directed. |
| 21 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and directed. |
| 22 | Taking down shutter of any description exc 1sqm but not exc 2 Sqm each and removing unserviceable materials from site of work complete all directed. |
| 23 | Taking down shutters of any description exc 1 sqm and not exc 2 sqm each including easing and adjusting and also refixing builder hardware as required including renewal of unserviceable screw and necessarry materials refixing shutter in same opening complete all as specifeid and directed. |
| 24 | S&F 2nd class hardwood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 25 | S&F 30mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 26 | S&F 25mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 27 | S&F 35mm thick 2nd class HW glazed skeleton shutters open rebated and prepared to receive glass gazed etc but divided into squares with plain chamfered or rounded mitred and rebated sash bar any numbers edges of framing plain chamfered or rounded fitted with cut and mittered beads for sceuring glass guage etc. size of members as specified in SSR pt-I section 8 clause 8.20(a) fitted to chowkhats complete all as specified and as directed. |
| 28 | Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed complete all as specified and as directed. |
| 29 | Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top and bottom rails and 19 x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009 complete all as specified and as directed. |
| 30 | S&F floor door stopper of aluminium alloy body and tongue with hard drawn steel spring with 140mm overall length of cover plate complete all as specified and directed. |
| 31 | S&F in repair 75mm long stainless steel butt hinges medium weight complete all as specified and directed. |
| 32 | S&F in repair 100mm long stainless steel butt hinges medium weight complete all as specified and directed. |
| 33 | S&F in repair 150mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 34 | S&F in repair 200mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 35 | S&F in repair 150mm long alumiunium handles cast type anodised complete all as specified and directed. |
| 36 | S&F in repair aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and as directed. |
| 37 | S&F in repair 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 38 | S&F in repair 50mm long stainless steel butt hinges medium weight complete all as specified and directed. |
| 39 | S&F 2nd class hard wood small fittings such as brackets of any type ,latch and hing block ,shaped door and window stops and the like including all necessary labours articles n exe 200 cu.cm each complete all as specified and directed. |
| 40 | S&F mild steel flat iron as in hold fast including screwing or welding complete all as specified and directed. |
| 41 | M&L providing cement concrete 1:3:6 type C1 using 20mm graded stone agg as in hold fast complete all as specified and directed. |
| 42 | S & F in door or window frame of any description with aluminium anodised sections, and fixing in position including all necessary cleats, lugs, breading and jointing arrangements complete all specified and directed. |
| 43 | M&L for Anodised aluminium sliding window, 3 track system and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc including all fitting complete all specified and directed. |
| 44 | M&L for 4.8mm thick plain tinted sheet glass ordinary quality in squares exc 0.5 Sqm each pane for aluminium window, complete all as specified and directed. |
| 45 | S & F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 46 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 47 | S&F 4mm thick ply wood grade BWR (type BB) fixed with screws to the timber frame work as on wall including dismantling boarding , any description, fixed in any position with nails complete all as specified. |
| 48 | S&F 12mm thick Medium density fibre board, exterior grade, fixed to timber framework with screws complete all as specified and directed |
| 49 | M&L for 2nd class hard wood plain fillets, square, rectangular or triangular in section, sectional area exc 3 Sqcm & n exc 6 sqcm clean sawn, secured with nails or brads complete all as specified and directed. |
| 50 | Dismantling of framed timper scantling 40 sq .cm and over in section,in any position complete all as specified and directed. |
| 51 | Ditto all as per item No 49.00 here-in-above but in fillets in framed work under 40 sq.cm in section complete all as specified and directed |
| 52 | M&L for second class clean sawn hard wood in scantling wrought, timber framed & fixed complete all as specified and directed. |
| 53 | All as per srl item No 51.00 here-in-above but except timber scantling complete all as specified and directed(NOTE: Seviceable second class hard wood obtained from dismantling under Sl item No 49.00 here-in-above shall be reused under the item) |
| 54 | M&L for preparation of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote oil complete all as specified and directed |
| 55 | M&L for 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed. |
| 56 | S&F in repair Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, 30mm width of flaps complete all as specified and directed |
| 57 | S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed |
| 58 | S&F in repairs magnetic door catches of standard size for cup board door approved complete all as specified and as directed. |
| 59 | Hacking Out Old broken Glass (any thickness,Size,Quality Or description) from wooden frames or Steel frame, concrete or brick surrounds,glazed with Putty or fixed with beads area not exc 1.5 sqm complete all as specified and directed. |
| 60 | S&F sheet glass 3mm thick, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and as directed. |
| 61 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 62 | M&L for MS work as in framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 63 | S & F steel work in tubular or square trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to Fe 410-W (Gde-E-250 quality A) complete all as specified and as directed by the Engineer-in-Charge |
| 64 | S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sucnk) forming holes with any attachement Fe 410W (Gde-E-250) Quality A complete all as specified. |
| 65 | S&F rolled mild steel Fe-410w (Gde-E-250) quality 'A' Roof trusses (framed) , trussed, purlins, crane gantries , rails and fastening and havy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces cleats etc complete all as specified. |
| 66 | All as per item No 64.00 here-in-before but fixing only complete all as specified and directed (Note :-serviceable Roof trusses (framed) , trussed, purlins, crane gantries, etc obtained from under relavant items) |
| 67 | M&L for applying two coats of synthetic enamel paint over a coat of red oxide including preparation of new or previously untreated steel surfaces of any description not other wise described over 10 cm with or girth complete all as specified and directed. |
| 68 | S&F in repair vitreous china squatting pan \\"Orissa\\" pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) with 'P' or 'S\\" trap from or back inlet etc including connection to trap and flushing pipe and provision of lime concrete bedding complete all as specified and as directed. |
| 69 | S& F in reapir Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed. |
| 70 | S&F in repair of PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminumized hinging device complete all as directed. |
| 71 | S&F in repair, light coloured Vitreous china wash basin, white oval shape, size 550 x 400 mm excl taps, waste chain and plug and porcelain stopper but incl brackets, waste pipe & CP waste coupling complete all as specified and as directed. |
| 72 | S&F in repairs Pillar taps, 15mm dia cast copper alloy, with capstan heads, chromium plated, but fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 73 | S&F in repair 10 ltrs capacity high or low level flushing cistern PVC of selected white valveless syphonoic action type inlet ball valve float and handle 10 ltrs discharge capacity complete including PVC connection and brackets complete all as specified and directed. |
| 74 | S&F PVC (SWR) floor trap with grating with incl jointing to waste pipe fixed in cement concerete (1:2:4) diameter of outlet pipe 75mm complete all as specified and directed. |
| 75 | S&F in repairs PVC connection 15x600mm long with PTMT nuts & bolts complete all as specified and directed. |
| 76 | S & F in repairs bore bib taps, ISI marked cast copper alloy, chromium plated fancy type screwed down, screwed for iron pipe or for brass ferule for 15 mm bore dia of pipe complete all as specified and directed. |
| 77 | S&F in repair fancy type Chromium plated with long shank and cup (concealed type) stop valve cost copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe 15mm bore complete all as specified and as directed. |
| 78 | S&F in repair 15 mm CP brass central hole wash hand basin mixer for mixing hot and cold water screwed down for iron pipe, complete all as specified and directed |
| 79 | S&F in repairs brass chromium plated shower roses 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union any colour for fixing with 15mm pipe complete all as specified and directed. |
| 80 | S&F in repairs brass chromium plated, 600mm long between flanges tubular towel rail , 20mm dia, D type. fixed with and including chromium plated brass screws and wooden plastic cleats, complete all as specified and directed. |
| 81 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 82 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 83 | S&F as in replacement stainless steel plate rack of size 24\\" x 36\\" x 10\\" complete all as specidfied and directed. |
| 84 | S&F in repair Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed. |
| 85 | S&F in repairs fancy type Harrison rails, andodised aluminium alloy with fixing brackets, stops, rollers etc, of 20mm dia for window and doors with curtain rings and decorative doom holders fixed to wall with screw complete all as specified and as directed. |
| 86 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coveringscomplete all as specified and directed |
| 87 | S&F Pre-Painted galvalume aluminum zinc coating GI based semi corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified. |
| 88 | S&F Pre-Painted galvantume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified. |
| 89 | S&F 0.63mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with 'J' type hook bolt and washer or self tapping screws in roof, wall etc.with grade of zinc coating 275 complete all as specified. |
| 90 | S&F 0.63mm thick, plain galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed. |
| 91 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.Note :-Dismantling of false ceiling to be carried out carefully without damaging existing fitting and fixtures of flase ceiling items |
| 92 | S&F exposed GI powder coated snap grid frame work for false ceiling of grid size 600 x600mm comprising of wall/cleat angle of size 25 x25 x0.35mm and main/cross tee of size 24 x38 x0.70mm with 4mm dia GI wire as suspender and including 4mm thick Plain E-Board including fixing arrangement from steel truss of any type and applying two coats of oil bound distemper over one coat of chalk whiting complete all as specified and directed. |
| 93 | Taking down existing unserviceable treatment of any description including cement plaster any thickness from roof surfaces, cleaning of roof surfaces and preparing it for further treatment and removing rubbish from the site upto distances 50 mtrs complete all as specified and directed. |
| 94 | M&L for Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed. |
| 95 | M&L for rendering 15mm thick on fair faces of brick work in cement mortar(1:4) using water proofing compound @2% by weight or cement as per manufacture instruction and finishing even and smooth without using extra cement all as specified. Note: (a) Plastering shall be carried out using Dimapur Sand. (b) WPC will be measured and paid separately |
| 96 | M&L for APP based polymeric membrane weighing not less than 3.50kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 160 gms/sqm) over a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per Sqm over one coat of bituminious primer using torch application, overlaping shall be minimum 75mm in transverse and 100mm in longitudinal complete all as specified and directed. |
| 97 | M&L for applying one coat Aluminium paint over APP based polymeric membrane or Surfaces of any description, over 10cm in width or girth, not otherwise described complete all as specified and directed. |
| 98 | S&F Felt bituminous PBS ROLL for roof sheet (metal) water leakling treatment complete all as specified and directed. |
| 99 | Taking up or down 15mm dia of steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed. |
| 100 | S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 101 | Refixing of old 15mm GI tubing and connections on new or old position (walls, ceilling, floor etc) complete all as specified and as directed. |
| 102 | Taking down copper/ aluminium point wiring ie. light, fan, socket or power/points complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and making good disturbed surfaces of ceiling, walls, floors, etc complete all as specified and directed. Please Enable Macros to View BoQ information |
| 103 | Taking down copper/ aluminium point wiring ie. light, fan, socket or power/points complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and making good disturbed surfaces of ceiling, walls, floors, etc complete all as specified and directed. Please Enable Macros to View BoQ information |
