|
| 1 | Please Enable Macros to View BoQ information |
| 2 | Demolition of concrete of any description in any position not otherwise specically provided for reinforced cement concrete complete all as specified and as directed. |
| 3 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles & precast concrete block walling built in cm complete all as specified and as directed. |
| 4 | M&L PCC 1:3:6 type C-1(using 20 mm graded stone aggregate) precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in CM 1:6 etc complete all as specified and as directed. |
| 5 | M& L providing precast reinforced cement concrete as in cover slab for drain ,landing etc in mixing of type B-1 1:2:4 (nominal mix ) using 20 mm graded stone aggregate set in cm1:6 complete all as specified and as directed Note : Reinforcement shall be measured & paid separately. |
| 6 | M&L rendering 10mm thick in CM 1:6 on fair faces of concrete/PCC block surfaces of walls finished even and smooth without using extra cement complete all as specified and as directed. |
| 7 | M&L Prepairing newly plastered wall surfaces and applying two coats of cement base paint complete all as specified and as directed. |
| 8 | M&L Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed. |
| 9 | Dismantling floor , hearth or wall tiling including cement mortarbedding (but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 10 | M&L 40 mm thick PCC, 1:2:4 type B0 (using 12.5mm graded stone agg) as in Levelling course,Sub floors and pavingetc complete all as specified and as directed. |
| 11 | M&L Non skid ceramic Coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exc 0.18 sqm, in floors & Roof etc. set and jointed in neat cement slurry and pointed in coloured cement to match joint free including 15 mm thick screed bed in CM 1:4 bedding complete all as specified and as directed. |
| 12 | M&L Joint free Non skid ceramic Coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match joint free including 15 mm thick screed bed in CM 1:4 bedding complete all as specified and as directed. |
| 13 | M&L 20 mm thick granite stone (of any type) work (table rubbed and polished) in floors ,staircase tread & rises of steps cooking platform,window cill/jambs etc laid bedded over 15 mm thick (1:4) bedding & pointed in white/coloured cement to match coloured tiles including grinding and mirror polishing complete all as specified and as directed. |
| 14 | M& L Hydraulically pressed burnt clay tile plain of size 200x200x19/20mm machine made laid over & including cement mortar screed 15mm thick in CM 1:6 mixed with water proofing compound and jointed pointed in CM 1:3 mixed with 5% crude oil by weight of cement complete all as specified and as directed. |
| 15 | S & F 1 mm thick stainless steel sink with drainage board in kitchen with waste coupling, plugs ,washers and waste pipes fixed on granite platform, overall size 915 x 460 mm bowl size 410 x 330 mm x 160 mm complete all as specified. |
| 16 | M & L 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and as directed. |
| 17 | S& F 20 mm bore unplasticised PVC pipe of pressure rating 10 kg/sqcm including all fitting fixed complete to walls ,ceilling or in floor etc. all as specified and as directed. |
| 18 | S&F fancy type chromium plated bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore complete all as specified and as directed. |
| 19 | S& F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and as directed. |
| 20 | M&L preparing new galvanised surfaces to receive painting by coating with morden solution including washing and cleaning and applying two coats of anticorrosive roof paint over a coat of red oxide primer over 10 cm width or girth on steel surface complete all as specified and as directed. |
| 21 | S&F alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets , cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed etc complete all as specified and directed. |
| 22 | Dismantling wall and ceiling boards of any description including cover fillets complete all as specified and directed. |
| 23 | Dismantling Timber scantling with framed work in fillets, rails, posts, rafters, purlins, etc. under 40 sq cm in section , in any position all as specified and directed. |
| 24 | M& L cleansawn Second class hard-wood scantlings with framed work complete all as specified and as directed. |
| 25 | M& L 19 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and as directed. |
| 26 | M & L 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed. |
| 27 | S& F auto hinges stainless steel suitable for kitchen cabinets,CB,Shelves etc. complete all as specified and as directed. |
| 28 | Supply & fix Extruded Aluminium anodised alloy handles fabricated type 75 mm long complete all as specified and as directed. |
| 29 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded (inclu fly proof shutter) complete all as specified and as directed. |
| 30 | S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 31 | Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed. |
| 32 | Excavation in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard / dense soil complete all as specified and as directed. |
| 33 | M&L Cement concrete 1:4:8 type C-2 using (40 mm graded stone aggregate) in post foundation and mass concrete complete all as specified and as directed. |
| 34 | M&L plain cement concrete 1:2:4 type B-0 (Using 20 mm graded stone aggregate ) including necessary formwork in columns, plinth courses, parapets and railling upto 60 cm in height,copings complete all as specified and as directed. |
| 35 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161 1979 grade St.-240 complete all as specified and as directed. |
| 36 | S&F Plate girder or single stanchions, built up one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections Confirming to Fe 410-W (Gde E- 250) quality A complete all as specified and as directed. |
| 37 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed. |
| 38 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Confirming to Fe 410-W (Gde E- 250) quality A complete all as specified and as directed. |
| 39 | Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 15cm long but not exc 22.5 cm long complete all as specified and as directed. |
| 40 | M&L preparation of newly steel surfaces of any description, over 10cm in width or girth, not otherwise described with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 41 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 42 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge , Gutter, Gable flashing, corner flashing etc, fixed with self tapping screws complete all as specified and as directed. |
| 43 | Taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.50 Sqm but n exc 4.0 Sqm each including iron mongeries complete all as specified and as directed. |
| 44 | S&F of Anodised aluminium powder coated (min thickness 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 45 | S&F Anodised aluminium window and ventilator shutters powder coated (min thickness 50 micron), fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed. |
| 46 | S&F Toughened glass 10mm thick as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and as directed. |
| 47 | Demolition of cement un-reinforced concrete in any position and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 48 | M&L 100 mm thick Cement concrete type D-2, 1:4:8 (using 40mm graded stone agg) as in Sub base complete all as specified and as directed. |
| 49 | M & L sand filling (cushioning) 50 mm thick under Floors or in fdn including watering and consolidation complete all as specified and as directed. |
| 50 | M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement no pigment complete all as specified and as directed. |
| 51 | M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement no pigment complete all as specified and as directed. |
| 52 | M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement no pigment complete all as specified and as directed. |
| 53 | M& L Providing, cement concrete in PCC 1: 2:4 type B-1 (using 20mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges including necessary form work complete all as specified and as directed. |
| 54 | Excavation in trenches n. exc 1.5 m wide and n exc. 1.5 m in depth for fdn etc nexc.10 sqm on a plan and n exc 1.5 m in depth and getting out hard/dence soil complete all as specified and as directed. |
| 55 | M & L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed. |
| 56 | M&L RCC Nominal Mix , 1:2:4 (type B-1) (using 20mm graded stone agg) for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 57 | M&L RCC Nominal Mix , 1:2:4 (type B-1) (using 20mm graded stone agg) for Columns, pillars, piers, posts and struts complete all as specified and as directed. |
| 58 | M&L formwork to rough finished surfaces of concrete sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed. |
| 59 | M&L Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed. |
| 60 | M&L Mild steel TMT bars 6 to 8 mm dia., and over as in stirrups cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed. |
| 61 | Returning filling in incl spreading,levelling, watering and well ramming in layers n.exc 25cm in any type of soil complete all as specified and as directed. |
| 62 | Removal of surplus soil to a distance of exceeding 250 meter but n.exc 500.0 m complete all as specified and as directed. |
| 63 | S& Fabricate and fixing Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts complete all as specified and as directed. |
| 64 | S& F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed. |
| 65 | S&F in repairs fancy type chromium plated bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore complete all as specified and as directed. |
| 66 | S&F in repairs stop valve, fancy type, chromium plated of brass with long shank and cup, concealed type, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of 15mm bore complete all as specified and as directed. |
| 67 | S&F in repairs fancy type pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without letter 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore complete all as specified and as directed. |
| 68 | S & F in repair 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float, chain and pull and brackets etc complete all as specified and as directed. |
| 69 | S&F PVC connection 15mm size with PTMT nuts, of 450mm length complete all as specified and as directed. |
| 70 | S& F in repairs NT Grating doom 100 mm dia of PTMT (minium wt 25 gms ) complete all as specified and as directed. |
| 71 | S& F in repairs Plastic water closet seat, black,closed pattern with flat bottomand cover and mild steel chromium plated or aluminium hinges devices,seat and cover for pedastal pattern Grating doom 100 mm dia of PTMT (minium wt 25 gms ) complete all as specified and as directed. |
| 72 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 73 | S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and as directed. |
| 74 | S&F Soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and as directed. |
| 75 | S&F in repairs glass self assembly complete all as specified and as directed. |
| 76 | S & F looking mirror 600 mm x 450 mm bevelled edge mirror or selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 77 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed. |
| 78 | S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 79 | S&F figured glass pin headed type and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 80 | S& F in repairs aluminium anodised barrel tower bolt of extruded section 150 mm long complete all as specified and as directed. |
| 81 | S& F in repairs aluminium anodised barrel tower bolt of extruded section 75 mm long complete all as specified and as directed. |
| 82 | S& F in repairs butt hinges extruded aluminium alloy with galvinised mild steel hinge pin anodized of hinges 100 mm type b-21 complete all as specified and as directed. |
| 83 | S& F in repairs 19/20 mm dia aluminium anodised pipe for curtain road complete all as specified and as directed. |
| 84 | S& F in repair alumium anodised brackets for above item complete all as specified and as directed. |
| 85 | M&L Preparing surfaces, plastered or unplasterd old decorated wall surfaces including cornices pilasters etc and applying one coat of white wash on wall complete all as specified and as directed. |
| 86 | Description all as per srl item No84 here-in-before but on ceiling complete all as specified and as directed. |
| 87 | M&L preparation of old decorated wall surfaces and applying one coat of distemper oil emulsion including necessary patch putty on walls complete all as specified and as directed. |
| 88 | M&L preparation of old surface of wall and applying one coat of cement base paint including necessary curing and necessary patch work Etc (external borders required dark blue or existing colour) complete all as specified and as directed. |
| 89 | M & L preparation of old painted wooden surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 90 | M&L for preparation of old steel surface of any description, over 10cm in width or girth,not otherwise described applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 91 | S& F floor door stopper of aluminium alloy body and double tongue, anodised with hard drawn spring of 140 mm size fixed in floor complete all as specified and as directed. |
| 92 | S& F Door closer hydrau lically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed. |
| 93 | Taking down chowkats or frames with shutter (without taking off shutter from the frame) n .exc 1.50 Sqm including iron mongeries complete all as specified and as directed. |
| 94 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per manufacturer's instructions complete all as specified and as directed. |
| 95 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width tuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable colour PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per manufacturer's instructions complete all as specified and as directed. |
| 96 | M&L for 75mm thick PCC , 1:3:6 type C-2 (using 40mm graded stone agg) as in plinth protection complete all as specified and as directed. |
| 97 | Taking down carefully aluminum/copper point wiring (light ,fan, socket any type, power, bell etc. ) complete including fixtures & fittings (such as ceiling rose, socket, Pendent, regulator, light fitting etc) and removing the material from site and making good the disturbed surfaces of walls ceiling etc complete all as directed. |
| 98 | M & L Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated sheathed (FRLS) cable, multi-stranded, copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd)and its all accessories complete concealed in wall / roof incl cutting & chases( making good all to the disturbed surfaces as per existing) and including modular flush metal boxes , modular cover & Plates suitable for modular fittings, concealed type for mounting modular switches, sockets, regulators etc including earth wire of PVC insulated (FRLS) copper conductor multistranded of 1.5 Sqmm size in green colour for one light point controlled by one way switch 5 Amp complete all as specified and as directed. |
| 99 | Description all as per srl item No 97 here-in-before but one ceiling fan point controlled by one way switch 5amp and one regulator complete all as specified and as directed. |
| 100 | Description all as per srl item No 97 here-in-before but one exhaust fan point controlled by one way switch 5amp complete all as specified and as directed. |
| 101 | Description all as per srl item No 97 here-in-before but 3 pin 5amp socket point controlled by one switch on independent board complete all as specified and as directed. |
| 102 | Description all as per srl item No. 97 but for 3 pin / 5 pin 16 Amps sockets outlet with 4 Sqmm PVC insulated & sheathed (FRLS) copper conductor cable independent complete all as specified and as directed . |
| 103 | M & L Sub Main Wiring with two runs single core 4 Sqmm PVC insulated sheathed (FRLS) cable with stranded copper conductor drawn in suitable size of rigid non-metallic PVC conduit and its all accessories complete concealed in wall/roof with and including 4 Sqmm copper green colour earth wire incl taking down old one complete all as specified and as directed.Note 02 run 4 Sq mm single core cable, one run of 4 Sq mm earth wire & One run of PVC conduit will measured as one RM. |
| 104 | Supply and Fixing fancy ceiling rose surface bakelite 65mm x 50mm three terminals complete all as specified and as directed |
| 105 | Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module complete all as specified and as directed |
| 106 | Supply and Fixing Modular switch 16 Amp single pole one way,1 Module complete all as specified and as directed |
| 107 | Supply & Fixing Modular fan Regulator electronic step type 120watt , 2 Module complete all as specified and as directed |
| 108 | Supply and Fixing Modular socket 2-in-1, 5 pins 6 Amps , combined 2 Module complete all as specified and as directed |
| 109 | Supply and Fixing Modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete all as specified and as directed |
| 110 | Supply & fixing indoor decorative ultra slim surface /Wall mounted T5 LED batten tube light complete fitting 1x 20 watt LED Tube fitting complete all as specified and as directed |
| 111 | Supply & fixing indoor decorative ultra slim surface /Wall mounted T5 LED batten tube light complete fitting 1x 10 watt LED Tube fitting complete all as specified and as directed |
| 112 | Supply & Fixing LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.complete all as specified and as directed |
| 113 | Supply & Fixing LED Gate light fitting made out with aluminum die cast with modern artistic design and white PC diffuser suitable with LED lamp B22 type including Lamp 7.5 Watt complete with three core flexible copper conductor cable of suitable size complete all as specified and as directed |
| 114 | Taking down old unserviceable existing DB / enclousers any size and type / any descriptions as iron sheet scrap including MCB any type / size and making good disturbed surface / wall as per existing complete all as specified and as directed |
| 115 | S&F MCB distribution board, SPN 8 Way, Double door, sheet steel, phosphatised, powder painted with Copper bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, 8 way complete all as specified and as directed |
| 116 | S&F MCB distribution board, SPN 2 Way, single door, sheet steel, phosphatised, powder painted without bus-bar , neutral link, earth bar and din rail , cable ties for cable management, 240 V, 2 way complete all as specified and as directed |
| 117 | Supply & fixing MCB SP 6 - 32 Amps, ' C' series ,bracking cap10KA complete all as specified and as directed |
| 118 | Supply & fix MCB DP 40 Amps,' C' series , bracking cap10KA, 240V complete all as specified and as directed |
| 119 | Supply & fix MCB DP 20 Amps,' C' series , bracking cap10KA, 240V complete all as specified and as directed |
| 120 | Supply and install of 35W LED building security light fitting with voltage range of 140-280V including all connections complete all as specified and as directed |
| 121 | M&L building security light bracket made out of 40mm dia light grade GI pipe of 1.2 m length bent to required shape suitable for fixing street light fitting on Steel tubular pole including two Nos clamps made out 40mm X 6mm flat with suitable nuts and bolts complete all as specified and as directed |
| 122 | M&L building security light bracket made out of 40mm dia light grade GI pipe of 1.2 m length bent to required shape suitable for fixing street light fitting on Steel tubular pole including two Nos clamps made out 40mm X 6mm flat with suitable nuts and bolts complete all as specified and as directed |
