|
| 1 | Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square Metre each, complete all as specified and as directed. |
| 2 | Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 sqm and not exc 4.00 sqm each complete all as specified and as directed. |
| 3 | M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors , windows , ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 4 | S&F Anodised Aluminium grill ( anodised transparent ordyed to required shade according to : 1868 with minimum anodic coating of grade AC 15) of approved design/patterm, with approved standardsection and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opning size for fixing and operation of handles and fixing opproved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 5 | M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium door shutters of aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing, powder coated aluminium handles 150mm size 2 Nos, 3 Nos powder coated aluminium hinges heavy duty and 02 Nos 150mm long powder coated aluminium tower bolts in each door shutter with powder coated aluminum snap beading, screws etc complete all as specified and directed Note : Panel filling ie. glass, fibre sheet, board etc. shall be measure and paid for separately. |
| 6 | M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator (adequate track) without sash, aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware ie. handles, barrel tower bolts, hinges etc, powder coated aluminum snap beading, screws etc. complete all as specified and directed. Note : Panel filling ie. glass, fibre sheet, board, wire mesh etc. shall be measured and paid for separately. |
| 7 | S&F 4.8 mm thick tinted glass of selected quality in square not exceeding 0.5 sqm in each pane, fixed to aluminum frame with and including suitable rubber beading complete all as specified and directed |
| 8 | S&F 4.8 mm thick tinted glass of selected quality in square exceeding 0.5 sqm in each pane, fixed to aluminum frame with and including suitable rubber beading complete all as specified and directed |
| 9 | S&F galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised staples complete all as specified and directed |
| 10 | Dismantaling of wall and ceiling boards fibre pulp insulation etc or insulation boards/slabs/blankets any thickness including cover fillets, complete all as specified and directed. |
| 11 | S&Fof False ceiling 4 mm thick HPSC pre-prime non asbestos fibre cement building board (E-classic of size 600mm x 600 mm/ 595 mm x595 mm ) decorative finish fixed with clips and screw including powder coated galvanised MS grid frame work false ceiling of (Main Tee of size 32mmx24mmx0.45mm cross tee of size 24mmx24mmx0.35mm ) and with slot for fixing including suspended with 2mm dia. GI wire hangers fixed with steel dash through fasteners from purline of the roof complete all as specified and as directed |
| 12 | Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed. |
| 13 | M&L for VitrIfied Ceramic tiles light shade 10mm thick ( square/ rectangular) polished,area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc set over and including 15 mm thick cement screed in (1:6) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 14 | M&L for vitrified ,coloured and printed tiles of width as directed and 10 mm thick as in skirting fixed over and including 10 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 15 | Dismantiling of stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar complete all as specified and directed. |
| 16 | M&L for 18-20 mm thick black granite stone slab machine cut in skirting/dado, cooking platform, jams, pillars, windows cills and the like laid over and including 20mm thick screed bed or backing coat in cement mortar (1:6) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed. |
| 17 | M&L for machine cut Kota stone slab flooring 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing , over and including screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:6 ) complete all as specified and directed. |
| 18 | M&L for machine cut kota stone slab 20 - 25 mm thick as in riser / steps, skirting, dado,cills and pillars laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing over and including 10 mm thick backing coat in CM (1:4) complete all as specified and directed. |
| 19 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc. 15cm thickness (below or above ground level) complete all as specified and directed. |
| 20 | Demolition of reinforcement cement concrete of any description and in any position reinforced concrete (re-inforcement cut to facilitate demolition) including disposal of unserviceable of mateial complete all as specified and directed. Note : Demolition material throughout MOD Land rate include above item |
| 21 | Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with aproved colour, design & attern as in foothpath, parks, lawns, drive ways or light traffic arking etc. of required strenght, thickness & size / shape, made by table vibrating method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra cement complete all as specified and directed. |
| 22 | Fair cutting n exc 10 cm width or girth on exposed surfaces of brick work as to fire place apertures, splayed angles, weathering cornices, groins etc. including rubber finish and waste complete all as specified and directed |
| 23 | M&L for PCC (1:4:8) Type D2 (using 40mm graded stone aggregate) as in foundation filling mass concrete, complete all as specified and directed. |
| 24 | M&L for 75mm thick PCC (1:3:6) Type C2 (using 40mm graded stone aggregate) as in plinth protection surface even and fair without using extra cement including forming & filling expension joints 65 mm deep x 10 mm wide filled with sealing compound grade A complete all as specified and as diected |
| 25 | Taking down cement or cement lime plaster on brick or stone walls etc. including racking out joints hacking for key scrubbing down with water etc complete all as specified and as diected |
| 26 | M&L for 15 mm thick rendering in cement mortar (1:4) on brick / concrete/ stone surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under appropriate item of BOQ as \\"supply only \\" |
| 27 | S & F Cast iron work grade FG 150, unmachined, in brackeds, gully traps, gratings, railing, frames, manhole covers fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles complete all as specified and as diected |
| 28 | M&L for 12 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 29 | M&L for 10 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 30 | M&L for preparation of the newly plastered surfaces of wall & applying two coats of cement base paint complete all as specified and directed. |
| 31 | M & L for two coats of oil bound emulsion paint over a coat of 2mm thick Birla wall care putty on plastered surfaces on wall incl preparation of surfaces complete all as specified and directed. . |
| 32 | M & L for two coats of oil bound emulsion paint over a coat of 3mm thick Birla wall care putty on plastered surfaces on wall incl. preparation of surfaces complete all as specified and directed. . |
| 33 | Material and labour for Preparation of old decorated surface of walls of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots and applying two coats cement base paint complete all as specified and directed. |
| 34 | Material and labour for Preparing of old decorated surface of walls of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots and applying two coats of oil emulsion over a coat of wall care putty complete all as specified and directed. |
| 35 | Supply only Liquid water proofing compound complete all as specified and as diected |
| 36 | Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) including all fittings, heads, shoes, bends, swan necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as diected. |
| 37 | S&F for 110mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as diected |
| 38 | S&F for 110mm dia PVC(SWR)pipes bends any radious complete all as specified and directed. |
| 39 | S&F for in renewal Curtain rod stainless steel decorative type 25 mm dia including fixing bracket and end knobs complete all as specified and directed. |
| 40 | Demolition of brick work /stone work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed. |
| 41 | M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6).complete all as specified and as directed. |
| 42 | M&L for Brick work with sub-class `B' bricks, straight or curved on plan to any radius, in half brick work built in cement mortar 1:4 complete all as specified and as directed. |
| 43 | M&L for RCC (1:2:4) type B-1(nominal mix) (using 20mm graded stone aggregate) as in foundation , including rafts, footings, foundation beams, plinth beams, bases for columns, etc. basement slabs and mass concrete complete all as specified and directed. |
| 44 | S&F TMT bars 10 mm dia over cut to length bent to shape required including cracking,bending spirally for hooping ends and binding with and including mild steel wire not less than 0.90 mm dia quality of steel conforming to Fe-410-0 or Fe-410-S, complete all as specified and as diected |
| 45 | M&L Hand rails, framed bracket of angle iron, support of any section, half round or other stock section or core for wooden hand rail straight portion , drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing post including cutting tops to shape as directed, drilling holes, notching for wire , etc.; flat iron fillets ( for securing wire mesh etc. including all necessary drilling , bolting or rivetting , etc., and similar work conforming to Fe 290 Gde E 165 with and including applying two coats of synthetic enamel paint over a coat of primer alround before fixing in position complete all as specified and directed |
| 46 | S&F mild steel work as in posts, main and cross beams, hip and jack rafters, purlins etc complete all as specified and directed. |
| 47 | M&L for applying for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified and as diected |
| 48 | M&L for applying for One coats of synthetic enamel paint on Old steel surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified and as diected |
| 49 | M&L for preparation of Old wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 50 | Dismantling Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings complete all as specified and as diected. |
| 51 | S&F Pre painted galvalum sheet 0.50 mm thick having aluminum zinc coating 150 gsm/ sqm double ribed trapezoidal profile steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall fixed with self tapping screws complete all as specified and as diected |
| 52 | S&F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as diected . |
| 53 | M&L for cement concrete ( 1:2:4) type B-1 (using 20mm graded stone agrregate) in lintels upto 1.5m clear span, cills, stes, seimic and other similar bands, plinth course, string course, lacing cours, arapets and railings upto 60cm in height, coping, kneelers, apex stones, bed plates, kerbs, water througs and the like including wheathering slightly rounded or chamfered angle and throating complete all as specified and directed. |
| 54 | S&F 30 mm thick Flush shutters ,soild core construction ,with paticle board core and plywood face panels , commercial type both face is covered with decorative face veneer with lipping /frame to match and complete all as specified and directed. |
| 55 | M & L for 35 mm thick glazed and skeleton factory made shutters of 2nd class Hard Wood, open rebated and prepare to reveive glass, guage etc (without sash bars ) edges of framing plain chamfered or rounded, fitted with moulded beads both sides for securing glass etc, size of members of shutters complete all as specified and directed. |
| 56 | M&L for New surface of wood and wood based material any description and in any position over 10 cm width or girth and M&L for applying two coats of synthetic enamel paint over one coat pink primer complete all as specified and as diected |
| 57 | S&F in renewal for floor door stopper of brass body and tongue, overall length of cover plate of size 150 mm, anodized, with hard drawn steel spring, fixed to shutters complete all as specified and as directed. |
| 58 | S&F for Mild Steel Butt hinges , medium weight, cold rolled, of size 100 mm complete all as specified and as diected |
| 59 | S&F for Extruded aluminium alloy handle of 150 mm size fabricated type, anodised complete all as specified and as diected |
| 60 | S&F for Aluminium anodised sliding door bolts 300mm long, plate type, complete all as specified and directed. |
| 61 | S&F for aluminium anodised barrel tower bolt of 200 mm of extruded section complete all as specified and as diected |
| 62 | S&F pressed steel frame of size 125mmx60mm for doors with one or more rebates including necessary lock strike plate,etc as per IS requirement complete all as specified and directed |
| 63 | S&F pressed steel frame of size 105mmx60mm for doors with one or more rebates including necessary lock strike plate,etc as per IS requirement complete all as specified and directed |
| 64 | S&F for MS 300 mm size ordinary rat tail springs plate type incl.rollar plate etc, complete all as specified and directed. |
| 65 | M&L for digital glazed ceramic tiles, coloured tiles of size 300mm x 450mm x 7mm thick on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:4) complete all as specified and directed. |
| 66 | M&L for hard core of gauge not exc. 63mm deposited spread and levelled in layers not exc. 15 cm thick, spread, levelled and rammed to a true surface including watering complete all as specified and directed. |
| 67 | M&L for 25mm thick PCC (1:2:4) Type B0 (using 12.5mm graded stone aggregate) as levelling course/mass concrete omplete all as specified and directed. |
| 68 | S&F for in renewal of size 600mmx450mm looking mirror of selected quality glass mounted on 4mm thick AC building board or commercial plywood and fixed to wooden plug with chromiun plated screws complete all as specified and directed |
| 69 | M & L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed. |
| 70 | M&L for RCC (1:2:4) type B-1 (nominal mix) (using 20mm graded stone aggregate) as in shelves, etc complete all as specified and directed. |
| 71 | Dismantling of wrought iron or mild steel work of any description not other wise provided for complete all as specified and as directed. |
| 72 | M&L Hand rails, half round or other stock section or core for wooden hand rail straight portion , drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing post including cutting tops to shape as directed, drilling holes, notching for wire , etc.; flat iron fillets ( for securing wire mesh etc. including all necessary drilling , bolting or rivetting , etc., and similar work conforming to Fe 290 Gde E 165 with and including applying two coats of synthetic enamel paint over a coat of primer alround before fixing in position complete all as specified and directed |
| 73 | Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed. |
| 74 | Taking down ceiling/exhaust fan of any sweep, removing blades, cleaning the fan completely of dust and dirt and Re-hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook rubber pad, nut bolts and washers etc, complete all as specified and as directed. |
| 75 | Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed. |
| 76 | Taking down unserviceable Sheet metal box & MCB DB SPN with MCB's of any make/capacity, complete all as specified and directed. |
| 77 | Taking down unserviceable TPN/VTPN DB with MCB's of any make/capacity, complete all as specified and directed. |
| 78 | M&L concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No) not less than 20 mm dia with all fitting and fixing accessories and 1.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes factory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches. sockets etc complete all as specified and directed. |
| 79 | One light point controlled by one switch. |
| 80 | One Ceiling fan point controlled by one switch. |
| 81 | One Exhaust fan point controlled by one switch. |
| 82 | One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch. |
| 83 | One 3 pin/5 pin switch socket outlet, 5 Amps on independent board. |
| 84 | Description all as per item No 78 here in before but point wiring with 2.5 sqmm FRLSH H confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire complete all as specified and directed. |
| 85 | S&F Modular switch 1 way 6 A,1 module complete all as specified and directed. |
| 86 | S&F Modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed. |
| 87 | S&F Modular switch 1 way 16 A,1 module complete all as specified and directed. |
| 88 | S&F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. |
| 89 | S&F ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed. |
| 90 | S&F Modular Fan step regulator, 120W - 2 module 240 volts, AC 50Hz complete all as specified and directed. |
| 91 | S&F Modular Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings ISI Marked complete all as specified and directed. |
| 92 | S&F LED Lamp 12 Watt, complete with 5 star rating complete all as specified and directed |
| 93 | S&F Decorative ultra slim LED Tubelight 20W LED Batte LED Tubelight, colour 6500k TO 4000k as per requirement, fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, fitting reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion complete all as specified and directed. |
| 94 | Supply and fixing LED luminaire of size 600 mm x 600 mm, 35/36 watt, 220 V AC,colour 6500k TO 4000k as per requirement ,recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete as per specified and directed |
| 95 | S & F security light fittings better optics for uniform distribution IP 66 protection LED of 30 watt with photometric sensor automatic on/off at night/mornng, Heat resistance glass, pressure die cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60mtr fixed to wall with 02 Nos FI clamps made of 40 x 5 mm FI, 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including reqd length of 1.5 Sqmm PVC multistranded BIS marked, 03 core copper conductor for connection from ceiling rose to light fittings incl testing on completion complete all as specified and directed. Please Enable Macros to View BoQ information |
| 96 | S & F security light fittings better optics for uniform distribution IP 66 protection LED of 30 watt with photometric sensor automatic on/off at night/mornng, Heat resistance glass, pressure die cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60mtr fixed to wall with 02 Nos FI clamps made of 40 x 5 mm FI, 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including reqd length of 1.5 Sqmm PVC multistranded BIS marked, 03 core copper conductor for connection from ceiling rose to light fittings incl testing on completion complete all as specified and directed. Please Enable Macros to View BoQ information |
