|
| 1 | Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 2 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick, (AZ 150GSM) of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 3 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick (AZ 150GSM) of any colour having tensile strength of 550 Mpa as in ridge,roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 4 | S&F 1.25 mm thick, 150 mm dia Mild steel sheet eaves gutters, galvanised class 3, half round with rounded edges incld dismantling all as specified and directed. |
| 5 | Dismantling of wall and ceiling boards (fibre, pulp, insulation. etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 6 | Providing & fixing Anodised aluminium snap grid frame work for false ceiling Size of grid 605 x 605mm all as specified as per directions of the Engineer-in Charge. |
| 7 | S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm longcomplete all as specified and directed. |
| 8 | S&F 6mm Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed. |
| 9 | Dismantling wooden scantling work framed truss etc complete all as specified and directed. |
| 10 | S&F Mild steel screw bolts shank dia 12 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long Fe-410- W(Gde-E-250) quality-B complete all as specified and directed. |
| 11 | S&F mild steel rolled work as in roof trusses, (framed),trussed,purlin,crane gantries,rails and heavy bracket framing (Beam,angle,channel or flat section) including distance pieces,cleats etc,confirming to gradeFe 410 -W (GdeE- 250) quality-A, complete all as specified and directed. |
| 12 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. |
| 13 | S&F for mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, angle iron chowkhats; ladders; framed balusters; walk ways; railings; framework of water tanks, wind tie and similar work conforming to Fe.290.Gde-E-165 including fixing of hold fast with bed block of size 200x200x15mm in CM 1:2:4 (using 20mm graded agg complete all as specified and directed. . |
| 14 | M&L for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over and incld a coat of red oxide primer.complete all as specified and directed. |
| 15 | M&L Preparation of new wooden surfaces over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over and incld a coat of pink primer complete all as specified and directed. |
| 16 | M&L for Vitrified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles exc 0.176 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour tiles including 15 mm thick screed bed in CM 1:6 complete all as directed. |
| 17 | All as per item no 16 above here-in-before but in skirting/ dado incld 10mm thick rendreing as backing coat all as specified and directed. |
| 18 | M&L for glazed ceramic coloured tiles (300x600x7mm) thick on vertical surfaces such as skirting and dado set and joint in neat cement slurry and pointed in white or coloured cement to match including 10mm thick plastering in C:M 1:3 as a backing coat rough finished to receive tiles.complete all as specified and directed. |
| 19 | Taking down Chowkats or frames n.exc 1.5 sqm each with shutters (without taking off shutters from the frames).complete all as specified and directed. |
| 20 | Taking down Chowkats or frames exc 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames).complete all as specified and directed. |
| 21 | S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDMrubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 22 | S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 23 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantt and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified and directed. |
| 24 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately complete all as specified and directed.. |
| 25 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm (double patam/rebate) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantt and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified and directed. |
| 26 | S&F providing 30mm thick factory made wire mesh solid WPC door shutter consisting of density 650 kg/cum manufactured by an ISO 9001-2015 certified company door to be panneled with SS mosquito mesh and XTN aluminum mesh for additional strength and safety purpose. ( Conforming as per IS 4020) The door should be water prooof , termite proof, fore retardant and having screw holding capacity. Door to be fixed to frame with 3 Nos SS butt hinges size 100mmx25mmx2mm and 32mm long steel screws drilled suitable to pass through other hardware should be fixed with 19x6mm size steel screws etc complete as per direction of engr in charge, manufacturers specifications & drawings Note: Fixture /fittings shall be measured & paid under relevant item. |
| 27 | S&F 4 mm thick tinded glass with one side vision film and glazing in squares not exc 0.5 Sqn in each pane complete all as specified and directed. |
| 28 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples (for windows and gauzed doors) all as specified and directed |
| 29 | M&L PCC 1:3:6 type C1 (20mm gr agg) as in anchoring hold fast, bed plate etc all as specified and directed. |
| 30 | S&F curtain rails 25 mm dia SS, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed. |
| 31 | S&F floor door stopper Overall length of cover plate 140 mm of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor. |
| 32 | Taking down cement plaster from stone/brick walls including racking out joints for keys and scrubbing down with water etc, complete all as specified and directed. |
| 33 | M&L rendering Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately) |
| 34 | Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge |
| 35 | M&L for 10mm thick rendering of ready mix mortar of approved make on brick work or concrete surfaces on external walls, finish the surface even and smooth without using extra cement as whole or in patch etc complete all as specified and directed. |
| 36 | M&L for preparation of newly plastered surfaces of walls and applying two coat of oil bound distemper over and incld a coat of alkali primer (of approved quality and tint) on wall using painting roller, complete all as specified and directed. |
| 37 | M&L for complete removal of exixting treatment of walls and applying two coat of oil bound distemper over and incld a coat of alkali primer (of approved quality and tint) on wall using painting roller, complete all as specified and directed. |
| 38 | Providing and applying wall care putty of 1 mm thick over plastered surface to prepare the surface even and smooth. complete all as specified and directed. |
| 39 | Demolition of brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings dressed stone work and Precast concrete articles, complete all as sfd and directed. |
| 40 | M&L for Brick work with Sub class 'B' old size burnt bricks straight or curved on plan to any radius in half brick thick walls, built in Cement mortar 1:4 complete all as specified and directed. |
| 41 | M&L for Brick work with Sub class 'B' old size burnt bricks straight or curved on plan exceeding 6m mean radius, built in Cement mortar 1:6 complete all as specified and directed. |
| 42 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 43 | M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl Screed bed or bedding layer 15 mm thick of mortar 1:4 complete all as sfd and directed. |
| 44 | Demolition of cement concrete in ground floor and paving n.exc 15CM thickness (below or above ground level) complete all as specified & directed. |
| 45 | M&L for Plinth protection 75 mm thick in PCC 1:3:6 type C-2(using 40 mm graded crushed stone aggregate) laid in alternate bays(not exc 2 Sqm each) finished even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 graded and three parts of sand by weight all as directed at site complete all as specified and directed. |
| 46 | M&L PCC chequered tiles glossy finish 30cm x30cm x 20 mm thick,set, jointed and pointed in neat cement slurry in floors With grey pigment cement and pigment 15mm thick screed bed in CM 1:4 etc all as specified and directed |
| 47 | M&L for Hardcore of broken stone or boulders n exc 63mm deposited, spread and levelled in layers n exc 15cm thick watered and rammed to a true surface complete all as specified and directed. |
| 48 | M&L for 75 mm thick Cement concrete type D2 (1:4:8) using 40 mm graded aggregate as in sub base all as specified and directed. |
| 49 | M&L for providing precast cement concrete, Type B1 1:2:4 (20 mm graded aggregate) factory made, Kerb Stone, having strength M-30, quoin blocks, string courses, copings, kneelers, apex stones, pier caps, pintle blocks, anchorage blocks, bonders (for stone walling), (of any section directed), with plain fair faces, including chamfers, weatherings, throating etc. and setting in CM 1:4 complete with joints to match complete all as specified and directed. |
| 50 | M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) as in coping etcc complete all as specified and directed. |
| 51 | M&L for 150 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars including Concrete bed cement concrete type C-2 1:3:6 to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; including Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed. |
| 52 | Dismantling of stone slab/paving tiles laid, bedded and pointed in any mortar of any description or thickness in floors complete all as specified and directed. |
| 53 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over and incld 15mm thick cement screed base in CM 1:4 complete all as spd & directed. |
| 54 | S&F in repair grating doom 100 mm dia of CP complete all as spd & directed. |
| 55 | M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified & directed. |
| 56 | Supplying and laying of 20 mm external dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with all plain fittings in trenches/ walls including dismantling old GI pipes including complete all as specified and directed. |
| 57 | Supplying and laying of CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all brass and plain fittings including dismantling old GI pipes complete all as specified and directed. |
| 58 | S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/walls fixed with MS clamps and shoe at ground level incl dismantling drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as directed. |
| 59 | M&L for PVC floor trap of 100mm dia,plain with grating including jointing with solvent cement. complete all as directed. |
| 60 | S&F PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement. |
| 61 | S&F 110mm PVC (SWR) bends any radius complete all as specified & directed. |
| 62 | S&F Brass CP Sink mixer for mixing hot & cold water (for wash hand basin) and fixed including dismantling of 15mm dia chromium plated pillar tap, complete all as specified and directed. |
| 63 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 64 | S&F in repair 15mm dia bib taps, cast copper alloy chromium plated with capstan head fancy type,screwed down,screwed for iron pipe or for brass ferrule and fixed all as specified. |
| 65 | S&F in repairs 15 mm bore chromium plated fancy type stop valve/angle valve, cast copper alloy screwed down high pressure with capstain head with long shank & cup complete all as specified & directed. |
| 66 | M&L 1000 litres capacity rotational moulded polyethylene water storage tanks ISI marked triple layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified including 20 mm brass valve high pressure with polyethylene float and fly nut complete and GI tank nipple, screwd for iron pipe incld dismantling of tank incld tank nipple and float valve complete all as specified and directed. |
| 67 | Supply and fabrication & fixing of Modular Kitchen cupboards, lower and upper cabints ( depth of 45 Cm up to 70 Cm) etc ,front side, bottom, top, and partions etc made out of 15-18 mm thick HDHMR board and back side 12 mm board (action tesa or equivalent ) with the front face shall be covered with laminate of high gloss from merino and the edges to be covered via 1.3 mm thick edge bending tape (colour of glossy laminates as approved by GE) Colour of laminates , design & paterns of partations/ etc as approved by GE) including all accessories of fittings - Auto/soft closing hinges for shutters , C/J gola profile for handel less, etc as required complete all as specified and as directed including frame work etc all as specified and directed.. |
| 68 | S & F stainless steel butt hinges 100mm long medium weight etc complete all as specified and directed. |
| 69 | S & F 200mm long SS barrel tower bolts of extruded section complete all as specified & directed. |
| 70 | S & F SS handle 150 mm long cast type complete all as specified & directed. |
| 71 | S & F 300mm long SS, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed. |
| 72 | Excavation in trenches n.exc 1.5m wide and n.exc 1.50m depth, for foundation etc. and getting out in soft loose type of soil.complete all as specified and directed. |
| 73 | Returning filling in excavated approved earth in to trenches around pipe etc after laying of pipes and testing complete including watering and well ramming in 25 cm layers complete all as specified & directed. |
| 74 | Removing surplus soil to a distance beyond 5 km upto total distanceof 15 km out side defence area where directed complete all as specified & directed.. |
| 75 | M&L for 150mm nominal size Double wall corrugated HDPE pipes stiffness class SN 8 high density,polyethylene pipe resistent to chemicals,easy and light weighted,long living,low friction,flexible,sun resistant pipe and laid in trenches incl demolition of old cement pipes complete all as specified and directed. |
| 76 | S&F factory made SFRC (Steel fibre reinforcement concrete ) manhole cover medium duty M-25 grade,75mm thick with SFRC frame of clear size exc. 0.35 Sqm but n.exc 0.90 Sqm, provided with provision of two lifting hooks welded at appropriate location, complete all as specified & directed. |
| 77 | Demolition of reinforced cement concrete roofs, floors (other than ground floor), beams, staircases, landing, chajjas and similar suspended work complete all as specified & directed. |
| 78 | M&L for RCC 1:1.5:3 type A1 with 20mm graded crushed stone agg as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete.complete all as specified and directed. |
| 79 | M&L for RCC 1:1.5:3 type A1 with using 20mm graded stone agg as in beams, cantilevers, bressummers, lintels over 1.5m span.complete all as specified and directed. |
| 80 | M&L for RCC 1:1.5:3 type A1 with using 20mm graded stone agg as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, desk slabs and in shelves and the like etc all as specified and directed. |
| 81 | M&L Formwork to sides of rough finished surface of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter fair finished surfaces of concrete etc all as specified and directed. |
| 82 | M&L Formwork to sides and soffits of rough finish surfaces of concretefloor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams fair finished surfaces of concrete etc all as specified and directed. |
| 83 | M&L Formwork to soffits of rough finish surfaces of concrete suspended slabs such as roof slabs, floor slabs, landing and similsr works; not exc. 200 mm thik etc all as specified and directed. |
| 84 | S&F MS TMT bars 10mm dia and over, cut to lenght, bent to shape required, including cranking, bending spirally for hooping for coloums, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips as specified and directed. |
| 85 | Ditto but 5 mm dia and over upto and incl 10 mm dia in stirrus, spaces, and binders as specified and directed. . |
| 86 | S&F Door closer hydraulically regulated,aluminium extruded section body designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 87 | M&L ploviding and injectiong chemical emulsion for post anti termite treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron. complete all as specified and directed. |
| 88 | Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface ofthe sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as directed. |
| 89 | Rough excavation, n exc1.5 m deep and getting out in Soft/loose soil complete all as specified and directed. |
| 90 | M&L for hard core n.exc 63mm gauge of broken stone or boulders deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 91 | M & L for Cement concrete type E-2, 1:5:10 (using 40mm graded aggregate) as in fdn and subbase to received top layer complete all as specified and directed. |
| 92 | M & L for Cement concrete 1:1.5:3, type A-1 (using 20mm graded aggregate) as harstanding finished surface even and fair complete incl form work complete all as specified and directed. |
| 93 | M&L for forming 12mm thick expansion joints filled with pre-formed bituminous fillar and top 30mm primed and sealed with sealing compound, Grade 'A' complete, thickness of slab 100mm complete all as specified and directed. |
| 94 | M&L for forming grade 'A' contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound complete all as specified and directed. |
| 95 | M&L for finishing surface of concrete surfaces by brooming complete all as specified and directed. |
| 96 | Removing excavated material (soils) to a distance not exceeding 1.50 km but n exc 5 km and depositing where directed complete. |
| 97 | Taking down carefully copper/aluminium any type of point wiring (light/fan/socket /power) complete (fittings such as switches, ceiling roses, holders, sockets,regulators light fittings) and making good the disturbed surfaces of wall/floors/ceiling etc) complete all as specfied & directed. |
| 98 | M&L point wiring with PVC insulated FRLSH 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing in & including rigid PVC conduit FRLSH grade ,ISI marked ,GI flush box of suitable size and 3 mm thick hylam sheet cover for flush boxes also including provision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly and earth terminal box drawn in same concealed conduit. |
| 99 | (a) One light/fan/bell point controlled by one way switch 5 amps. |
| 100 | (b) One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board. |
| 101 | (c) One 3 pin 5 Amps socket outlet point controlled by one way switch on same board. |
| 102 | All as per above item No 100. but with cable 2.5 Sqmm size 1100 volts grade for One 3 Pin socket 15A Independent board |
| 103 | S&F of switch piano type 5 amps single pole one way complete all as specified and directed. |
| 104 | S&F of switch piano type 15 amps single pole one way complete all as specified and directed. |
| 105 | S&F of socket outlet multipurpose 2/3 pin 5 amps flush button type complete all as specified and directed. |
| 106 | S&F of socket outlet multipurpose 2 in 1, 5 and 15 Amps complete all as specified and directed. |
| 107 | S&F of ceiling fan regulator step type for 1200/1400 mm sweep suitable for BLDC ceiling fan including connections complete all as specified and directed. |
| 108 | Supply, laying and drawing submain wiring in and including 20 mm dia concealed PVC rigid conduits including cutting of chases for laying conduit making good the surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 6.0 sqmm (as earth wire) of multistranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforing to IS : 694 of 1990 complete including connection all as specified and directed. |
| 109 | Taking down ceiling fan, sealing cable end, dismantling blades and removing fan and blades and deposit to MES store with complete accessories all as specified and directed. |
| 110 | Supply & fixing ceiling fans complete with blades, down rod and accessories, 230 volt, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) alongwith providing/fixing hook for hanging of ceiling fan as per site requirement all as specified and directed. |
| 111 | S&F of factory made epoxy polyester powder coated distribution board SP & N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection) fixed flush to wall and suitable for universal mounting and including Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and as per required SP MCBs as outgoings complete all as specified and directed.NOTE (a) MCBs shall be measured and paid separately.(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. |
| 112 | S&F of factory made epoxy polyester powder coated distribution board TP & N 4 way (VTPN MCCB DB) with metal double door (IP-54 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 100 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with 4 pole MCCB as incommer and as per rquirement SP MCBs outgoings complete all as specified and directed including taking down old DBs. NOTE :-(a) MCB/MCCBs shall be measured and paid separately.(b) All cables terminating into MCB/MCCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. |
| 113 | S&F in of MCCB 100 Amp 4 pole 16 KA at 415 V with fixed thermal megnatic release complete all as specified directed. |
| 114 | S&F of single pole MCB 6 to 32 Amps, 240 V, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete including taking down old MCB's complete all as specified and directed. |
| 115 | S&F of SPN MCB 32 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity, complete all as specified and directed. |
| 116 | Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.complete all as specified and directed. |
| 117 | Supply and fixing LED Building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistantcomplete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete withIP 65/66 protection complete. complete all as specified and directed. |
| 118 | Supply and fixing LED luminaire 600mm x 600mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 119 | Supply and fix exhaust fan steel body AC single phase 230 Volts of size 300 mm sweep with blades and frame and louvers with making opening on the wall/surface in round/square shape as per site requirement complete all as directed and specified. |
| 120 | S&F ceiling rose 3 phase/PVC/polycarbonate isolated body complete all as specified and directed. |
| 121 | S&F single pole and neutral enclosure with a two pin earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed. |
| 122 | S&F of single pole MCB 40 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete including taking down old MCB's complete all as specified and directed. |
| 123 | M&L far Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, burieddirectly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed. Please Enable Macros to View BoQ information |
