|
| 1 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness any description and in any position not otherwise specifically provided as dir. |
| 2 | Excavating hard dense soil in post holes (or similar holes) each n exc 0.5 cu. m, getting out,returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm as dir. |
| 3 | M&L Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface all as dir. |
| 4 | M&L Cement concrete type B2, 1:2:4 (c2,1;3:6)40mm graded aggregate foundations,filling and mass concrete all as dir. |
| 5 | M&l type-B0,12.5mm graded agg.concrete in roof kerbs or mud stops, rounded or chamfered on edges, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets as dir. |
| 6 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia as dir. |
| 7 | M&L Mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia as dir. |
| 8 | M&L for RCC type-B-1 1:2:4, 20mm gradded aggregate in Columns, pillars, piers, posts and struts as dir. |
| 9 | M&L Formwork rough finished surfaces of concrete to sides of pillars,posts, struts, piers, columns and stanchion as dir. |
| 10 | S&F ISMB'S, 125 single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections and structural steel is painted one shop coat of zinc chromate primer paint (including preparation of surface) at all as dir. |
| 11 | Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. |
| 12 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified as dir. |
| 13 | M&L brock work with sub class b bricks built in cement mortar 1:6 as dir. |
| 14 | M&L plastering 15mm thick CM (1:4) as dir |
| 15 | Roughening surfaces of old concrete floor by picking, sweping clean and washing down with water to remove dust etc. as dir. |
| 16 | Brushing neat cement slurry with 3.0 kg of cement per sq. metre as dir. |
| 17 | Screed bed or bedding layer of 1:4 (1:6) cement mortar 20 mm thick for laying floor finishes as dir. |
| 18 | S&F joints free Non Skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors & skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. Make : Premium Quality tiles of HR Johnson/Kajaria/Nitco as dir. |
| 19 | Oil Bound Distemper:- M & L Distempering with 1st quality acrylic distemper on wall (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as permanufacturer's specification. Two or more coats . Make : Asian, Berger, Dulux & JSW as directed by EIC /WIC |
| 20 | S&F wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 Please Enable Macros to View BoQ information |
