|
| 1 | M & L for rough excavation not exceeding 1.5 m deep and getting out in soft soil. |
| 2 | M&L Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. |
| 3 | M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in Cement mortar.ratio 1:6. |
| 4 | M/L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) flat Rough finished surface of concrete. (Fair finished surface) |
| 5 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 6 | M&L for R.C.C (nominal mix) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like (Type B0 1:2:4 12.5mm graded aggregate). |
| 7 | Demolition of cement Concrete of any description and in any position not otherwise specifically provided. |
| 8 | M&L for cement concrete Type B, 1:2:4( M15), 12.5mm graded aggregate. |
| 9 | M&L for hard core of gauge n. exc. 63 mm deposited, spread and levelled in layers n. exc. 15cm thick with broken bricks, watered and rammed to a true surface. |
| 10 | M&L Brushing neat cement slurry with 3.0kg of cement per sq. metre®and Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes (1:4). |
| 11 | M & L for Machine cut kota stone slab flooring 40-50mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. |
| 12 | M & L for Marble work (table rubbed and polished) for wall lining (veneering to wall) 25mm thick in cement mortar (1:3) and pointin with white cement (1:2) using marble dust with admixture of pigment to match with shade of following types (a) Makrana White |
| 13 | M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match colored tiles.( make: kajaria, jonson, somani) Shade / design as approved by EIC at the time of execution. |
| 14 | S&FVirified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. |
| 15 | S&F Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.20mm |
| 16 | M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 17 | Dismantling asbestos cement corrugated, semicorrugated, etc.) sheets in roof coverings. |
| 18 | M&L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes.conforming to I. S.1161- 1979 grade St.-240 |
| 19 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 20 | Cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3. |
| 21 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.(make: TATA, Bhusan, Jindal) |
| 22 | Dismantling boarding, any description, fixed in any position with nails. |
| 23 | S & F of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to tre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. |
| 24 | S&f for Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) thickness 8mm. |
| 25 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. |
| 26 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. |
| 27 | M&L for Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash asteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. |
| 28 | S&F PVC tiles/ sheets, laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors. |
| 29 | M & L for taking down Chowkhats or frames exc. 1.5 sq. m each but n. Exc 4 sqmwith shutters without taking off shutters from the frames and remove to store. |
| 30 | M&L forProviding and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) ® Make Fenesta, AIS, Prominance, Aluplast. |
| 31 | Supply and fixing factory made uPVC white colour Two track four panels sliding glazed door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 8.00 sqm upto 10.00 sqm) comprising of uPVC multi-chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.l fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & widthof profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Make Fenesta, AIS, Prominance, Aluplast. |
| 32 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profileswith wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed tothe wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated),steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area exceeding 2.00 sqm each Make Fenesta, AIS, Prominance, Aluplast. |
| 33 | S&F 4.8mm thick Sheet glass, ordinary quality, glazing with oil putty in square exc 0.5 sq. m in each pane sheet Extra over sheet glass, ordinary quality, if sheet glass is ground or obscured or frosted, on one side |
| 34 | S&F Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified Powder Coating (minimum thickness of powder coating 50 micron) |
| 35 | Supply & Fixing of powder coating of any colour (Thickness or powder coating not less than 50 micron) Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 36 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. withpowder coating of any colour (Thickness or powder coating not less than 50 micron). |
| 37 | S&F 4.8mm thick Sheet glass, ordinary quality, glazing with oil putty in square exc 0.5 sq. m in each pane sheet |
| 38 | S&F Prelaminated particle board, interior grade, prelaminated with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work®both sides with decorative choice laminations12 mm |
| 39 | S&F size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed250 mm. |
| 40 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed |
| 41 | S&F Door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed aluminium bodu (Die cast) |
| 42 | S & F of Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples ® |
| 43 | M&L for Preparation of new surface of any descriptionin width or girth not otherwise described and apply one coat of red oxide zinc chrome primer and two coat of synthetic enamel paint. Shade will be decided by EIC.(steel surface). |
| 44 | Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. |
| 45 | M&L rendering 15mm thick on fair faces of brick work or concrete surfaces1:6 cement plaster and rendering is to be finished even and smooth (without using extra lime or cement)® |
| 46 | M&L for 3mm thick wall care putty on wall (Make: asian, JK,Birla) |
| 47 | M&L for preparing the new surfaces, apply plastic emulsion two coat Surfaces of any description over 10cm girth or width, not otherwise described (Asian paints/ Nerolac, Berger) as approved by EIC in exterior grades. |
| 48 | Cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3. |
| 49 | M&L for cement concrete Type B, 1:2:4( M15), 12.5mm graded aggregate. |
| 50 | Removing building materials etc. to a distance of 5 km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination.(0.62 cum =One load) |
| 51 | M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc, Brushing neat cement slurry with 3.0kg of cement per sq. metre®screed bed (1:4) of avg.25 mm thick over cemented surface and the surface to be finished even & smooth without using extra cement & maintaining proper cross slope for effective drainage. |
| 52 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 15 mm dia |
| 53 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 20 mm dia |
| 54 | S&F GI tube 15 mm dia Tubes, 'medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors. (make: jindal, Tata, Bhusan) |
| 55 | S&F GI tube 20 mm dia Tubes, 'medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors (make: jindal, Tata, Bhusan) |
| 56 | S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) fixing in repair with Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.(Make: Essco,kohler,Grohe) |
| 57 | S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedfancy type, chromium plated15 mm bore dia.(Make: Essco,kohler, Grohe) |
| 58 | S & F OF 10 lit. PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets. and connections to pipes and fixing of chain and pull, or lever, if any. (Make: Essco,kohler, Grohe) |
| 59 | S&F Tubular towel rail 20mm dia brass chromium plated. |
| 60 | S&F for brackets of brass chromium platedfix in tubular towel rail 20mm dia |
| 61 | S&F PVC connections 15mm size with PTMT nuts of length 450mm |
| 62 | S&F 15 mm bore dia Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed chromium plated fancy type.(Make: Essco,kohler,Grohe) |
| 63 | S/F of vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including provision of lime concrete bedding and making good to floor fixed in repair.(make: essco, hindware, parryware) |
| 64 | S & F Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level fixing in repair. |
| 65 | S&F of Waste coupling of PTMT (half or full threaded, Dia 32 mm (Minimum weight 45gms), suitable for washbasin. |
| 66 | S & F of Vitreous China wash basin, white, flat back, size 550x400mm excluding ditto but including brackets, Wash basins, Fixing of Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, fixed in repair.(make: jaquar, kohler, grohe) |
| 67 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long with aluminium alloy brackets and guard rail ® |
| 68 | S&F Self-closing taps, cast copper alloy, chro-mium plated, screwed for iron pipe and fixed fixed in repair.(make: essco, kohler, grohe) 15MM SIZE. |
| 69 | S&F Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) bore dia of discharge pipe 32 mm |
| 70 | S&F Brass chromium plated shower rose 125mm sizewith or without swivel joints, including fixing to steel pipe or union. (make: essco, kohler, grohe) |
| 71 | S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) |
| 72 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors(110mm) |
| 73 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors (75mm) |
| 74 | S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement ®(75mm) |
| 75 | S/F of PVC (SWR) 'P’ trap, size 110/110 mm. (make: supreme, prince, Kisan) |
| 76 | S/F of PVC(SWR) bends of any radius of size 75.0mm |
| 77 | S/F of PVC(SWR) bends of any radius of size 110 mm |
| 78 | S/F of PVC(SWR) Tee of any radius of size 75.0mm |
| 79 | S/F of PVC(SWR) Tee of any radius of size 110 mm |
| 80 | S/F of PVC (SWR) vent cowl, size 75 mm |
| 81 | M&L for painting with aluminium paint of approved brand and manufacture to give an even shade two or more coats on new work. |
| 82 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of acoat of bitumen primer for bitumen membrane @ 0.40 litre/sqm of the same manufactures as membrane of density at 25°C, 0.87-0.89 kg/litre and viscocity 70-160 cps. Over the primer coat the layer ofmembrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through theauthorised applicator of the manufacturer of membrane Make- STP,IWL,TATA. |
| 83 | S & F chrome plated gun hand shower (Health faucet) with 8-10 mm dia 1.2-1.5 meter long flexible tube and wall hook complete complete with desireable colour finsh Make: Jaquar,Kohlar, grohe |
| 84 | S & F SS Toilet paper holder fixed to walls with chromium plated (CP) brass screws. |
| 85 | S&F S.S Soap dish, any type, fixed to plugs with chromium plated brass screws |
| 86 | M&L for pvc flexible waste pipe minimum length 80 cm with inner thread adapter. |
| 87 | S&F of Hand dryer with automatic sensor start (touch free) power minimum 1800 w and support 200-240 v, wind temerature 55 c +/- 10 c induction distance 50mm-120 mm. |
| 88 | S&F Urinal partition of figured/frosted toghned figured glass size 900X450 mmand min 8 mm thick with brass chrome plated fittings for fixing of glass.(Make: jaquar, kohler, grohe) |
| 89 | S&F Vitreous China urinals, bowl type (flat back or corner wall type), complete including inbuilt spreader, waste and trap providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including Auto closing urinal flushvalve with wall flanges for flushing (cocealed type) grating and Union for discharge pipe with urinal spreader fixied in supply pipe and waste coupling minimum weight 50gms (Exclusive of fixing supply pipe to flushing cistern) fixed in repair.(Make; Jaquar, Kohler, grohe) mimimum size 385x325x635. |
| 90 | S&F bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers in required / custimize sizes. |
| 91 | S&F of fancy light for wash basin mirror minimum 08 watts, compatible 200-240v. |
| 92 | S & F of High density polyethylene (HDPE) pipe 50mm in floor, wall and celing with clamps and nesessary fittings like Tee, elbow, socket etc complete. |
| 93 | 1. REMOVING THE EXISTING FLOORING Removing the existing Laminated wooden flooring and carting the material within 10 mtrs from the site thereafter disposal of the debris will be in the scope of the client.(113 sqm)2. SURFACE PREPARATION Through surface cleaning Chemically and mechanically cleaning the surface of all cement residuals, and other particles(113 sqm)3. Anti Termite Treatment. (Thoroughly executed prior and after fixing the wooden flooring(113 sqm)4. 20mm ROBBINS/ACTION USA MAPLE SPORTS FLOORING \\"MFMA, WSF& BWF Accredited\\" 2nd & Better GRADE - MFMA Laying of 6 microns HDPE sheet with a overlapping of minimum 6\\" which acts as a vapour barrier. >Fixing of (19mm) Air Cush cushion pads 330mm Centre to Centre >Thereon fixing of seasoned runners kiln dried of size 30/38mm SQM 113 6321.25 711140.63 x 60/68mm. >The sleepers are fixed at a distance of 310mm centre to centre, in a brick pattern in right angle to the intended edges of finished flooring. >Thereon installation of MFMA approved wooden flooring of 20mm X 57mm/83mm thickness (embossed by MFMA Mill manufacturer) >Allow 2\\"(50mm) voids at perimeter & vertical obstructions. >Provide adequate expansion at regular intervals accross the flooring during installation as per local humidity conditions >The flooring to be sanded manually with coarse, medium and fine grade sandpaper >Finally finishing it with anti-skid \\"MATT\\" sports polish system(113 sqm)5. LINE MARKING: Line Marking of the Badminton Court.(for one court)6. BADMINTON POLE :\\" SFCO E\\" Movable Badminton Poles Model-2M60NR Providing and Installing Movable \\" SFCO E\\" Badminton Pole made with 2\\" Square Pipe with Base Unit for countervailing weight load of 60 kgs per side with Top Protective Foam Top , and two castors painted in white , spray painted.(for one court) Please Enable Macros to View BoQ information |
