|
| 1 | Supply and errection of 8.0 mt long(410SP-14) steel tubular poles, sawaged type conforming to IS-2713, (Part-II) ,planting depth 1.5 mt .Pole shall have 2 no bolts welded at a distance of 3 mt. from bottom of pole and suitable holes shall be drilled in pole for service connection and lum. earth wires. |
| 2 | Erection of metallic pole 8.0 metre and upto 10.0 metre in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation , refilling and concrete jaketing above ground etc. as required. |
| 3 | Earthing of the pole, Complete by GI Pipe 40 mm dia. 0.5 mtr long through 10 swg GI wire after driving in ground up to a depth of 3' from the base of foundation including nuts , bolts etc. (Complete job) |
| 4 | Painting of pole with one coat of red oxide and two coats of Al. paint. |
| 5 | Supply and fixing of four way arm bracket for mounting the luminaire on the top of the pole fabricated out of 40-50 mm OD GI pipe , welded and supported with a triangular MS gasset plate , with a provision of cast iron cap.( design to be approved before installation) |
| 6 | Providing of service connection and earthings to luminaire from the junction box in 1.5 mm PVC insulated, multicore copper wire . |
| 7 | Providing and fitting of M.S. junction box with suitable size clamp.The junction box shall be fitted with 4 pole 32 amp backelite connector and 3-6amp MCB 1 No. schinider/Legrand make. Also a suitable clamp to be provided with junction box for proper fixing of junction box. |
| 8 | Supply , laying underground including excavation , testing and commissioning of PVC alluminium armoured cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments.Havell/Eq. standard make as directed by engineer incharge and making end termination with brass compression gland and aluminium lugs of required size. |
| 9 | b) 16 sq.mm 2 core |
| 10 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting,jointing etc.direct in ground (90 cm below ground level) including excavation and refilling the trench, making the surface level but excluding sand cushioning and protective covering etc., complete as required. |
| 11 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 12 | Supply, installation , testing and commissioning of LED based Flood light, housing made up of pressure die cast aluminum Alloy with effective thermal management,sturdiness and embossed brand name/logo name of manufacturer. The fixture should have a minimum system efficacy of greater than 120 lumen/Watt and a minimum system lumen output of 24000 lumens and maximum system wattage of 200 Watts.The fixture shall have a CRI of minimum 70, SDCM<5. The fixture shall be designed for a system life of 50,000 hours @70% lumen maintenance. Ingress Protection of IP66 (lamp and gear Compartment) and Mechanical Impact Resistance Rating of IK >=07 with toughened glass cover.The fixture driver should have an operating voltage range of 140-270 V, inner surge protection of >=4KV, PF >0.95 and THD<10% at full load. Driver should cut off at high voltage of 320volt for safety. The fixture should comply with the parameters as per IS10322. The LED driver should comply to IEC61000-3-2 ed.3.2, 2009 for Harmonics. Manufacturer shall have inhouse lab approved by NABL. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Philips/ Havell ( Jeta Aris)/ Wipro/ Crompton make ( sample to be approved before installation) |
| 13 | Supply installation testing and commissioning of Flexible waterproof with IP68 rating, Silicon made, LED Rope light 6 watt per meter,400 lm/Mt,72 LEDs per Mtr, Color : Warm White/Yellow, along with accessories in surface, using high brightness SMD LED as the light source suitable for decorative lighting along with suitable LED driver for providing power supply to the LED strip. Prefered make : Philips/Havell/Crompton make. Please Enable Macros to View BoQ information |
