|
| 1 | Supply of 1.5 sq. mm ISI marked, FRLS/HFFR PVC insulated, single core copper conductor cable. |
| 2 | Supply of 2.5 sq. mm ISI marked, FRLS/HFFR PVC insulated, single core copper conductor cable. |
| 3 | Supply of 4.0 sq. mm ISI marked, FRLS/HFFR PVC insulated, single core copper conductor cable. |
| 4 | Supply of 6.0 sq. mm ISI marked, FRLS/HFFR PVC insulated, single core copper conductor cable. |
| 5 | Supply of 10.0 sq. mm ISI marked, FRLS/HFFR PVC insulated, single core copper conductor cable. |
| 6 | Supply of 16.0 sq. mm ISI marked, FRLS/HFFR PVC insulated, single core copper conductor cable. |
| 7 | Supply of 25 mm dia ISI marked, PVC conduit |
| 8 | Supply of S.P. 5/6 amps, one way modular switch, ISI marked |
| 9 | Supply of S.P. 15/16 amps, one way modular switch, ISI marked |
| 10 | Supply of 3 pin 5/6 A, modular socket outlet, ISI marked |
| 11 | Supply of 6 pin 15/16 A, modular socket outlet, ISI marked |
| 12 | Supply of 3 pin 5/6 Amp socket outlet piano type ISI marked. |
| 13 | Supply of Call bell/ buzzer, single phase |
| 14 | Supply of 25 A modular SPMCB, 'C' curve |
| 15 | Supply of 6 A, to 32 A, ratings, SP MCB, \\"C\\" curve, 10 KAbreaking capacity |
| 16 | Supply of 6 A, to 32 A, ratings, SPN MCB, \\"C\\" curve, 10 KAbreaking capacity |
| 17 | Supply of 63 A, 2 pole isolator |
| 18 | Supply of 63 A, 4 pole isolator |
| 19 | Supply of 100 A, 4 pole isolator |
| 20 | Supply of 100 A, 16KA, TPMCCB, Ics=100% Icu and Operational Voltage 690V |
| 21 | Supply of 125 A, 16KA, TPMCCB, Ics=100% Icu and Operational Voltage 690V |
| 22 | Supply of 150 A, 16KA, TPMCCB, Ics=100% Icu and Operational Voltage 690V |
| 23 | Supply of 200 A, 25KA, TPMCCB, Ics=100% Icu and Operational Voltage 690V |
| 24 | Supply of 250 A, 25KA, TPMCCB, Ics=100% Icu and Operational Voltage 690V |
| 25 | Supply of 400 A, 35KA, TPMCCB, Ics=100% Icu and Operational Voltage 690V |
| 26 | Supply of 40 A, rating, 2 pole RCCB, 30mA. |
| 27 | Supply of 63 A, rating, 4 pole RCCB, 30mA |
| 28 | Supply of sheet steel DP MCB enclosure |
| 29 | Supply of sheet steel TP MCB enclosure |
| 30 | Supply of 9 Watt LED retrofit lamp suitable for B22 holder |
| 31 | Supply of 15'' inch (380 mm) sweep 1400 rpm exhaust fan Heavy duty complete with shutter blades etc. as required. |
| 32 | Supply of 250 mm (10 inch) sweep 1250 rpm exhaust fan Fresh Air Type complete with shutter blades etc. as required. |
| 33 | Supply of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply, earthing etc. complete as reqd. 1200mm, BEE 5 star rating, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) |
| 34 | LED Batten light (System lumen efficacy >135 lm/Watt)Supply of LED surface mounted Batten light of following body material and construction as per IS :10322 with driver (Replaceable) as per the requirement with Driver efficiency >85% ,Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI ≥80, Flicker free (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing complete in all respect. As required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body (Thickness ≥ 1.20 mm) (C) 36 Watt |
| 35 | LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy >135 lm/Watt) Supply of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 °C to 50°C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66, IK 10, CRI ≥70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM (Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect. As required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 150 Watt Please Enable Macros to View BoQ information |
