|
| 1 | Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified and directed. |
| 2 | Demolition of cement concrete (un-renforced) in ground floor and paving. N exc. 15 cm thickness (below or above ground level.) & removal of rubbish material complete. |
| 3 | Demolition of reinforced cement concrete of any description and in any position (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 4 | Dismantling of stone slab and tiles of any description or thickness in floors, aprons etc laid, beded and pointed in any mortar including removing the dismantled material complete all as specified and directed. |
| 5 | Taking down Chowkatts or frames with shutters without taking off shutters from the frame exc 1.5 sq. m but n exc 4 sq m each complete all as specified and directed. |
| 6 | Taking down Chowkatts or frames with shutters (without taking off shutters from the frame n. exc 1.5 sq. m each complete all as specified and directed. |
| 7 | Taking down shutter of any descriptioon exc 1 Sqm but n exc 2 Sqm each complete all as specified and directed. |
| 8 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish of the premises complete all as specified and directed. |
| 9 | Excavation in trenches, n.exc 1.5 m wide & n.exc 1.5 m deep for foundation etc, or for shaft, wells, cesspits, man holes etc not exceeding 10 Sqm on plan & getting out in soft/loose soil complete all as specified and directed. |
| 10 | All as per srl item No 9.00 but depth exc 1.5 m but n exc 3 m in depth and getting out in soft / loose soil complete all as specified and directed. |
| 11 | Suface excavation n exc 30cm deep and averaging 15cm deep in any type of soil complete all as specified and directed. |
| 12 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 13 | Removing surplus excavated soil to a distance n.exc 50 metre and n exc 100 metre and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed. |
| 14 | PCC (1:4:8) type D-2, using 40 mm graded stone aggregate in fdn mass concrete complete all as specified and directed. |
| 15 | M&L for hard core of broken stone or boulders of gauge n.exc. 63mm deposited spread and levelled in layers n.exc. 15 cm thick watered and rolled/ rammed to a true surface complete all as specified and directed. |
| 16 | M&L RCC work M-25 Design Mix (using 20mm gradedcrushed stone aggregate )as in foundation including , raft, plinth beam bases for column etc basement slabs under ramed piles and mass concrete complete all as specified and directed. |
| 17 | M&L RCC work M-25 Design mix (using 20mm graded crushed stone aggregate) as in columns , pillars , piers posts and struts complete all as specified and directed. |
| 18 | M&L RCC work M-25 design Mix (using 20mm graded crushed stone aggregate) as in beams, cantilevers bressumers, lintel over 1.5 mtr span complete all as specified and directed. |
| 19 | M&L RCC work M-25 design mix (using 20mm graded crushed stone aggregate) as in slab supported in walls cantilevers etc complete all as specified and directed |
| 20 | M&L RCC work M-25 design mix (using 20mm graded crushed stone aggregate) as design mix as Chajjas complete all as specified and directed. |
| 21 | M&L for RCC (Nominal mix ) in chajjas, kitchen shelves Type B1 1:2:4 (20mm graded stone) complete all as specified and directed. |
| 22 | M&L TMT bars, 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 23 | All as per srl item No 22.00 but for 5mm to 10mm dia as in stirrups, spacers binders etc complete all as specified and directed. |
| 24 | M&L TMT bars, 6 to 8 mm dia cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 25 | M&L form work to side of concrete foundation , footing , bases of columns, raft and raft beams, sides and soffits (If any) of foundation and plinth beams and similar work, vertical or to batter complete all as specified and directed. |
| 26 | M&L form work to side of pillar posts struts piers columns etc complete all as specified and directed. |
| 27 | Form work to chulla hoods, chajjas, troughs, kitchen slab and similar items including edges and fair finished surfaces complete all as specified and directed. |
| 28 | M&L form work to sides and soffits of floor or roof beam, beam nauching, griders, bressum-mers lintels cantilevers, shelves including supprots, overhangs etc also splays between floors and beams etc complete all as specified and directed. |
| 29 | M&L form work as in suspended slab, such as roof slabs, floor slabs, landings and similar work, not exceeding 20mm thick (Horizonal or sloping) complete all as specified and directed. |
| 30 | M&L form wok to edges of concrete flats, treads, breaks in floors, windows cills, concrete railings, floor and roof n.exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide complete all as specifed and directed. |
| 31 | M&L form work to cullaah hoods, chajjas, throughs and similar items including edges complete all as specified and directed. |
| 32 | Treating the bottom and side of exc at the rate 5 ltr/sqm emulsion of surface area complete all as specified and directed. |
| 33 | Treating the backfil in contact with foundation at the rate of 7.5ltr/sqm emulsion of surface area complete all as specified and directed. |
| 34 | Treating the bottom surface of floor at the rate 5 ltr/sqm emulsion of surface area complete all as specified and directed. |
| 35 | Treating the of under plinth protection at the frate of 5 Ltr/Sqm emulsiom of surface area complete all as specified and directed. |
| 36 | M&L for 15 mm thick screed bed on fair faces of concrete/brick surfaces in CM 1:4 with water proofing compound @ 3% of wt of cement finished even and smooth in order to maintain proper slope over existing roof surfaces for laying APP based polymeric membrane finished complete all as specified and directed. (Polymeric membrane and WPC shall be meausred and paid seperately here-in-after) |
| 37 | Supply only integral water proofing compound complete all as specified and directed. |
| 38 | M&L water proofing treatement to RCC roof slab including parapet comprising of following course of treatement/specified from bottom to top (a) Applying Bituminous primer @ 0.40 Ltr per sqm over plastered surfaces of roof including parapet surfaces. NOTE : Bituminous primer shall be manufactured by M/S STP Ltd or 'EMW FLATE' M/S Texas India Ltd (b) Over the priming coat laying one layer APP based polymeric membrane of approved manufacturer, 3 mm thick weight not less 3.6 Kgs/Sqm reinforced with non woven polyester fabric weight not less than 150 gms per sqm polymeric membrane shall be taken to a height of 60 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flushing including 2 coats of aluminium paint over APP membrane surface. |
| 39 | M&L two coat of reflective silver Aluminium paint over APP membrane complete all as specified and as directed. |
| 40 | M&L providing cement concrete cast in situ (1:2:4) type B1, using 20mm graded crushed stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span,cills, steps, seismic and other similar bands, plinth courses, string courses , lacing courses, parapits and railings upto 60cm in height, copings kneelers, apex stones, bed plates, kerbs not provided for in item No 04028 water throughs and the like including weathering slightly rounded or chamfered angles and throating as directed. |
| 41 | M&L brick work with fly ash 'brick straight or curved on plan exc 6m mean radius built cement mortar 1:6 complete all as specified and as directed. |
| 42 | M&L brick work with fly ash 'brick straight or curved on plan exc 6m mean radius built cement mortar 1:4 complete all as specified and as directed. |
| 43 | M&L 15 mm thick rendering in cement mortar 1:4 mixed with water proofing compound finished with even and smooth mixed with Liquid Water Proofing admixture complete all as specified and directed. (Note : WPA shall be measured and paid separately under relevant item of this Schedule). |
| 44 | Material and labour for rendering 10mm thick internal surfaces in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and directed. |
| 45 | M&L rendering 5 mm thick in CM 1:3 on concrete ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 46 | M&L for preparing newly plastered surfaces of wall and applying two or more coats of 100 % premium acrylic emulsion Paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance dirt resistance ,exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre / 10 Sqm over and including priming coat of Exterior primer @ 0.9 litre /10 sqm over 1mm thick Birla white wall care putty complete all as specified and directed. |
| 47 | M & L for complete removal of existing treated surfaces of wall and applying two or more coats of 100 % premium acrylic emulsion Paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance dirt resistance ,exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre / 10 Sqm over and including priming coat of Exterior primer @ 0.9 litre /10 sqm over 1mm thick Birla white wall care putty complete all as specified and directed. |
| 48 | M & L for complete removing of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salt, trading oil greasy spots etc on old decorated surfaces of wall and applying two coats of oil bound distemper of approved shade/tint over and inclucluding 1 mm thick Birla white wall care putty complete all as specified and directed. |
| 49 | M&L for preparing newly plastered surfaces and applying two coats of Oil bound distemper over a coat of alkali resistant primer on walls including 1 mm thick wall putty complete all as specified and directed. |
| 50 | M&L preparation of newly plastered surface of ceiling applying three coats of white wash complete all as specified and directed. |
| 51 | Material and labour complete removal of existing treatment of ceilings & applying two coats of white wash complete all as specified and directed. |
| 52 | S&F in repair PVC connection pipe, 15mm dia & 600mm long with adopter and washer at both end complete all as specified and directed. |
| 53 | S&F Rotational moulded polyethylene water storage tanks of 500 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 54 | S&F in repair ball valves brass high pressure with polythelene float and fly net complete, screwed, iron pipes 15 mm dia complete all as specified and directed. |
| 55 | S&F in repair fancy type bib taps, chromium plated alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed bore in dia 15mm complete all as specified and directed. |
| 56 | S&F in repair white vitreous china wash hand basin 'Flat back' of size 450x300mm fixed on and including new brackets CP waste coupling and PVC Waste pipe complete all as specified and directed. |
| 57 | S&F in repair stop valves,fancy type, chromium plated alloy screwed down high presure, screwed both ends for iron pipe or for unions of 15 mm dia long sunk concealed type complete all as specified and directed. |
| 58 | S&F in repair Stop/angle valves,fancy type, chromium plated alloy screwed down high presure, screwed both ends for iron pipe or for unions of 15 mm dia complete all as specified and directed. |
| 59 | S&F in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed. |
| 60 | S&F in repair PVC waste pipe of 32mm bore of suitable length for WHB/Urinal/sink complete all as specified and directed. |
| 61 | S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 62 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 63 | S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 64 | M&L writing letters or figures (Block, roman, Italic or Indian letter n.exc 30cm high) complete all as specified and directed. |
| 65 | S&F anodized aluminium frame and other sections for doors, windows, ventilators, partitions, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed. |
| 66 | S&F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified and directed. |
| 67 | S&F for powder coated of any colour as approved anodised aluminium grill of approved pattern for windows/ ventilators/doors complete all as specified and directed. |
| 68 | S&F sheet glass ordinary quality, in squares n. exc. 0.5 SQM each 4.80 mm thick complete all as specified and directed. |
| 69 | S&F Sheet glass, ordinary quality, in squares exc 0.5 sq. m each pane 5.5 mm in thickness complete all as specified and directed. |
| 70 | S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples to wooden/steel frames with beading complete all as specified & directed. |
| 71 | S&F frame work such as grills,gratring etc with ends of bars shouldered or riveted or forged into spikes, framed guard bars, barred iron door ladder, door frame, cooler stand, balusters, walk ways, railing, frame work or water tanks & Similar work conforming to Fe-290 Gde E-165. |
| 72 | Cutting holes in brick/stone walls n. exc. Half brick built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed. |
| 73 | S&F 35mm thick IInd class hard wood factory made panelled door shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. the size of rail and stiles as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated and fixed to chowkats complete all as specified & directed |
| 74 | M&L for factory made 2nd class glazed and skelton door shutter made out of stiles & rails of 30mm thick 2nd class hard wood, klin seasoned and chemically pressure treated & open reabted and prepared to receive glass/gauge etc (without sash bars), edges of framing plain,chamfered of rounded, fitted with and mitred beads for securing glass etc compelte, the SIze of members of shutter shall be as per IS-1003. The shutter shall be fitted to the chowkhats complete all as specified and directed. |
| 75 | Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 76 | M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified & directed by Engr-in-Charge. |
| 77 | M&L 75 mm thick PCC 1:4:8 type D2 (using 40mm graded aggregate) as in floor sub base complete all as specified and directed |
| 78 | M&L PCC 25mm thick 1:2:4 type B0 (using 12.5mm graded aggregate) as in floor as in leveling course complete all as specified and directed. |
| 79 | M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and directed. |
| 80 | M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar 1:4 complete all as specified and directed. |
| 81 | M&L for non skid ceramic tiles (coloured) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but n exc 0.18 in floors etc. laid over 15 mm screed bed or bedding layer in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed. |
| 82 | M&L Non skid white Ceramic tiles 7 to 8 mm thick in light shade(square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick cement screed in cm 1:6 complete all as specified and directed. Make : Johnson, Kajaria, AGL. |
| 83 | All as per srl item No 82.00 but on walls over 10 mm thick rendering in CM 1:4 complete all as specified and directed. |
| 84 | M&L for Glazed coloured ceramic tiles in vertical surface 300x450x7 mm thick over 10 mm rendering in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed. |
| 85 | M&L 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection path laid in panel surface finished even and fair using extra cement complete all as specified and directed. |
| 86 | S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing. |
| 87 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing. |
| 88 | S&F exctruted aluminum alloy with galavanisied mild steel hing pin Butt hinges 100mm long complete all as specified and directed. |
| 89 | S&F Aluminum anodised, barrel tower bolts of extruded section and fixed 150 mm long complete all as specified and directed. |
| 90 | S&F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor complete all as specified and directed |
| 91 | M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings, cooler stands (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming Fe 410 (Gde E-250 quality A) & making good the floor in PCC 1:2:4 type B-0 to match the existing floor complete all as specified and directed. |
| 92 | S&F aluminium anodised barrel tower bolt 200 mm long extruded section and fixed complete all as specified and directed. |
| 93 | S&F 150mm 'D' type Aluminium handles, anodised complete all as specified and directed. |
| 94 | S&F extruded aluminium alloy handles 150mm size fabricated type anodized ISI marked complete all as specified and directed. |
| 95 | S&F mild steel butt hinges medium weight colod rolled of size 100mm, ISI marked complete all as specified and directed. |
| 96 | S&F Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) 300mm long not less than 12mm dia with and incl minimum of 06 bolts and nuts, 4 on plate and 2 on staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, plate and fixed complete all as specified and directed. |
| 97 | S&F door closer hydraulically regulated, designation No. 3, aluminium (Die cast) body, universal type (ISI marked), fixed in repairs, complete all as specified & as directed. |
| 98 | S&F vitreous china squatting pan of Orrisa pattern size 580mmx440mm white with integral foot rest (excluding flushing cistern and flush pipe complete incluidng provision of lime concrete bedding complete all as specified and directed |
| 99 | Supply and fixing PVC flushing cistern low level 10 ltr cap with inlet ball valve float and handle syphonic action type incl brackets and flush pipe of polythene of low or high density ISI marked complete all as specified and directed. |
| 100 | Taking up or down 15mm steel tubing and connections, complete all as specified and directed. |
| 101 | Taking up or down 20mm steel tubing and connections, complete all as specified and directed. |
| 102 | Taking up or down 25mm steel tubing and connections, complete all as specified and directed. |
| 103 | Dismantling/demolition water tanks of capacity exc 250ltr but not exc 500ltr and removing from site complete all as specified and directed. |
| 104 | Dismantling of 110mm bore PVC(SWR) drain pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed. |
| 105 | Dismantling of 75mm bore PVC(SWR) drain pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed. |
| 106 | S&F tubes medium grade 'galvanised' with and including all fitting and fixed bore of 25 mm dia complete to walls and ceiling or laid in floor complete all as specified and directed. |
| 107 | S&F tubes medium grade 'galvanised' with and including all fitting and fixed bore of 20 mm dia complete to walls and ceiling or laid in floor complete all as specified and directed. |
| 108 | S&F tubes medium grade 'galvanised' with and including all fitting and fixed bore of 15mm dia complete to walls and ceiling or laid in floors of 15mm bore complete all as specified and directed. |
| 109 | S&F 15mm dia stop valve/angle valve of copper alloy fancy type chromium plated screwed down high pressure with crutch or butter fly handle screwed on both ends for iron pipe or for union complete all as specified and directed. |
| 110 | S&F 15 mm bore fancy type long body bib tap, half turn, with wall flange, cast copper alloy with capstan heads, chromium plated, screwed for iron pipe or for brass ferrule, complete all as specified & as directed. |
| 111 | S&F 600mmx450mx5mm thick looking mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood incl framing and fixed to wooden plugs with chromium plated screws & cup washers complete all as specified and directed. |
| 112 | S&F WHB flat back of Size 580x450mm excluding taps waste chain plug stopper but incl brackets incl waste pipe cutting pinning in ends of brackets complete all as specified and directed. |
| 113 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 114 | S&F vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm, white with integral foot rest and 'P' or 'S' trap, including provision of Cement concrete bedding, connection to trap and Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level etc complete including making good to disturbed surfaces of floor to match with existing surface complete all as specified and directed. |
| 115 | S&F in repairs PVC low level flushing cistern 10 litrs capacity (white ISI marked) with inlet ball valve, float and handle, syphonic action type including brackets fixed in repairs, complete all as specified and directed. |
| 116 | S&F in repair 15mm dia CP pillar tap fancy type cast copper alloy, CP with capstan head, screwed down high pressure, with or without lettered 'HOT' or 'COLD' with long screwed shank and fly nuts screwed for iron pipe and fixed complete all as specified and directed. |
| 117 | S&F in repair Tubular towel rail, 20mm dia, D type, 60cm long between flanges of Brass chromium plated complete all as specified and directed. |
| 118 | S&F 15mm dia bore cast copper alloy chromium plated fancy type pillar tap swan neck type for with out cold & hot water complete all specified and as directed . |
| 119 | S& F 1000 Ltr capacity of rotational moulded polyethylen water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including S&F 20mm float valeve 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600 mm long with fitting complete all as specified and directed. |
| 120 | S& Fixing ball valve brass high pressure with polythene float and fly nut screwed on iron pipe ad fixed 20 mm bore of pipe complete all as specified and directed. |
| 121 | S&F PVC connection pipe 15mm dia & 600mm long with adopter and washer at both end complete all as specified and directed. |
| 122 | S&F 20mm bore Gun Metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed |
| 123 | S&F Brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 124 | S&F stainless steel curtain rod of 25 mm dia including ss bulb at both ends and pair of stainless steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam complete all as specified and directed. |
| 125 | S&F Grating doom 100 mm dia of PTMT (Minimum weight 25 gms) fixed with cement complete all as specified & directed. |
| 126 | S&F PVC (SWR) pipes of 75 mm nominal outside diameter single socketed in any length with rubber ring joints laid in trenches or in floors of 75mm pipe complete all as specified and directed. |
| 127 | S&F PVC (SWR) pipes of 110 mm bore single socketed in any length fixed to wall/floor complete all as specified and directed. |
| 128 | S&F PVC (SWR) floor trap, plain with grating including joining with solvent cement 75 mm dia complete all as specified and directed. |
| 129 | S&F PVC (SWR) bend 75mm bore of any radius complete all as specified and directed. |
| 130 | S&F PVC (SWR) bend 110 mm bore of any radius complete all as specified and directed. |
| 131 | S&F PVC(SWR) Vent Cowl 110 mm bore complete all as specified and directed. |
| 132 | S&F PVC (SWR), 110mm junction single, (Single T) equal or unequal complete all as specified and directed. |
| 133 | S&F in repair Grating doom 100 mm dia of PTMT (Minimum weight 25 gms) fixed with cement complete all as specified and directed. |
| 134 | S&F in repair 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed. |
| 135 | S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 136 | Dismantling of old app membrane on roof surfaces in cluding removal of loose old plaster for receiving new plastering complete all as specified and directed. |
| 137 | M&L for PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in roof padding, laid to a minimum consolidated thickness of 25 mm as leveling course, laid and compacted in min slope 1:30 over roof complete all as specified and directed. |
| 138 | M&L for 20mm thick Granite slab of approved shade, as in platform etc, bedded & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of Granite stone including cutting, grinding and polishing (mirror polish i.e. full granite polish as per local trade practice) including required cutting to suit the size of oval type wash hand basin over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed. |
| 139 | M&L Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window, cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed. |
| 140 | S&F in repair vitreous china wash down water closet pan (Pedestal pattern), white including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc. & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified & as directed. |
| 141 | M&L 100 mm thick PCC 1:4:8 type D2 (using 40mm graded aggregate) as in foundation filling and mass concrete as floor sub base complete all as specified and directed. |
| 142 | M&L sand filling under floor or in foundations including watering and consolidation complete all as specified and directed. |
| 143 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade and fixed with grey cement and pigment over sand cussuion complete all as specified and directed. |
| 144 | M&L Precast cement concrete solid block factory made in PCC 1:2:4 type B-1 using (20 mm graded stone aggregates ) set in CM 1:6 (size of precast concrete block complete all as specified & directed. |
| 145 | M&L for Reinforced concrete pipes, class NP-2, ISI marked, laid to slope in trenches, jointed and tested complete with collars for 150 mm bore pipes complete all as specified and directed. |
| 146 | M&L for PCC (1:4:8) type C-2, using 40 mm graded stone aggregate in bedding to drain pipes, including packing under and haunching against the sides of pipes tested complete for 150 mm bore concrete pipe complete all as specified and directed. |
| 147 | M & L for brick work with sub class B bricks, straight or curved on plan to any radius in old type brick thick walls , built in C M in 1:4 complete all as specified and directed. |
| 148 | Taking down cement plaster any description on brick or stone any description complete all as specified and directed. |
| 149 | M&L for PCC (1:3:6) type C-2, using 40 mm graded stone aggregate as in manholes etc complete all as specified and directed. |
| 150 | M&L for Cement concrete (1:2:4) type B-1, using 20 mm graded stone aggregate in surface channels of drains and benching including finishing the top of benching even and smooth using extra cement complete all as specified and directed. Notes :- Forming fair finished channel shall be measured and paid for separately. |
| 151 | S&F TMT bars as in reinforcement 8 mm dia cut to length bent to shape required including cranking, hooking ends and binding with mild steel wire (annealed ) not less than 0.9 mm complete all as specified and directed. |
| 152 | M&L for PCC (1:2:4) type B-1, using 20 mm graded stone aggregate in coping etc complete all as specified and directed. |
| 153 | M&L precast cement concrete Type B1 1:2:4 (20 mm graded stone aggregate) as in covers to landing, man hole covers etc complete all as specified and directed. |
| 154 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150mm bore pipe complete all as specified and as directed. |
| 155 | M&L for flat iron as in hold fast, hooks, cleats welded to angle iron door/window frames etc complete all as specified and directed. |
| 156 | Taking down carefully copper/aluminium point wiring (light, socket or power) complete (fittings such as switches, ceiling roses, pendants, regulatos, sockets etc to be measured separately), and making good disturbed surfaces of walls, floors etc to match with existing surfaces complete all as specified and directed. Please Enable Macros to View BoQ information |
| 157 | Taking down carefully copper/aluminium point wiring (light, socket or power) complete (fittings such as switches, ceiling roses, pendants, regulatos, sockets etc to be measured separately), and making good disturbed surfaces of walls, floors etc to match with existing surfaces complete all as specified and directed. Please Enable Macros to View BoQ information |
