|
| 1 | SCHEDULE 'A' PART-I: B/R WORKS |
| 2 | Dismantling wrought iron or mild steel work of any description as in barbed wire, concertina oil of etc complete all as directed. |
| 3 | Demolition of brick, stone/boulder masonry, laid dry |
| 4 | Excavation in trenches not exc. 1.5m wide and not exc. 1.5m deep for foundation etc. not exc 10 Sqm on plan getting out as in soft/loose soil complete all as specified. |
| 5 | M&L PCC 1:4:8 type D-2 (using 40mm graded aggregate ) as in foundation, filling & mass concrete |
| 6 | M & L for reinforced cement concrete Design mix M-30 (using 20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under-reamed piles and mass concrete. |
| 7 | M & L for reinforced cement concrete Design Mix M-30(using 20 mm graded stone aggregate) in beams, cantilevers, lintels over 1.5 m span. |
| 8 | M & L for reinforced cement concrete Design mix M-30 (using 20 mm graded stone aggregate) as in columns, pillars, piers, posts and struts etc. |
| 9 | M & L for form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter. |
| 10 | Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers,lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. |
| 11 | M&l for formwork to sides of pillars, posts, struts, piers, columns and stanchions |
| 12 | M & L for Mild steel TMT bars upto 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips. |
| 13 | M&L for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips. |
| 14 | M & L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 |
| 15 | Returing filling in incl spreading levelling watering in layers n.exc 25 cm . |
| 16 | Removing excavated material not exc. 50mtrs and depositing where directed at a level not exc. 1.50mtrs above the starting point. |
| 17 | M&L plastering in CM (1:4) 15mm thick on brick/concrete and finished even and smooth without using extra cement. |
| 18 | M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of white wash. |
| 19 | Mild steel Framed work with square / rectangular hollow section , angle iron, MS flat etc such as ornamental grills, gratings etc . with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290. Gde-E-165 complete all as specified and as directed.(Note : Design of Grill,Gate and others similar works as approved by GE ) |
| 20 | M & L for preparation of new steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide priming. |
| 21 | Supply only Integral water proofing compound |
| 22 | S&F in repairs galvanised 2 stranad steel barbed wire 2.24 mm dia barbed with 2 mm dia barbed at 75 mm spacing s and straing and fixing to any type of standard rail strain -ing Bolt , including, securing or tying at crossing with and provision of galvanised mild steel wire , staples or steel pine etc complete all as specified & directed |
| 23 | S&F concertina coil 600mm dia 10m openable length having 50 Nos rounds per 6m length, upto 4.00m height wall. |
| 24 | M & L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in cast in lintels upto 1.5m span, copings, bed blocks for hold fasts. bed plates, roof kerbs and similar work including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work and demolition of old concrete complete all as specified and directed. |
| 25 | S & F 50 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls including all necessay fittings. Please Enable Macros to View BoQ information |
