|
| 1 | Note: (i) Please refer schedule 'A' notes before quoting the tender. (ii) Amount of Schedule of credit shall be deducted off line by the department. |
| 2 | Taking down chowkhats or frame exc 1.5 sqm but n exc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 3 | M&L for cement concrete type B-0, 1:2:4 using 12.5mm graded crushed stone aggregate as in filling of window frames of pressed steel/ or etc to making good to surface of window and in bed blocks etc complete all as specified and directed. |
| 4 | S&F for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specifiedPowder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 5 | S&F anodised three track sliding aluminium window and ventilator shutters, without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 6 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 7 | Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds, downward facia and similar work exc 15 cm but n exc 30 cm in width or girth; including cutting to edges, all mitres and stopped ends, etc. complete all as specified and directed. (Note - work has to be executed in three storey bldg and necessary arrangement for scaffolding etc are included in this item) |
| 8 | M&L for taking down plaster including rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 on outer surface of wall/ bands, sunk panels, cornices, skirtings, drip moulds, downward facia and similar work and ceiling with WPC including Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed.Note:- The water proofing compound shall be measured and paid separately. |
| 9 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. including M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 on outer surface of wall surfaces with WPC complete all as specified and directed.Note:- The water proofing compound shall be measured and paid separately. |
| 10 | Supply only integral water proofing compound complete all as specified and directed. |
| 11 | S&F for 3mm to 4mm sheet glass, tinted ordinary quality for fixing in window or where required complete all as specified and directed. |
| 12 | M&L for anodised aluminium snap grid frame work for false ceiling and hangers 6mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and including 4mm Non-asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/aluminium framework with screws complete all as specified and directed. |
| 13 | M&L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 14 | M&L for brick work with fly ash bricks (modular size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. |
| 15 | S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 ltrs capacity, low level, white, with inlet ball valve, float and handle including brackets flushing cistern and flushing pipe, complete all as specified and directed. |
| 16 | M&L for PCC in 1:4:8 type D2 (using 40mm graded crushed stone aggregate) 100mm thick as in sub base of hardstanding and finishing cement concrete surface even and rough complete all as specified and directed. |
| 17 | M&L for Non-Skid coloured ceramic tiles 7 to 8mm thick joint free, (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and including 15mm thick screed bed or bedding layers in CM 1:6 complete all as specified and directed. |
| 18 | M&L for Non-Skid coloured ceramic tiles 7 to 8mm thick joint free, (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and including 15mm thick screed bed or bedding layers in CM 1:6 complete all as specified and directed. |
| 19 | M&L for vitrified ceramic tiles of dark shade 8 to 10mm thick (square/rectangular) of size 1200 mm x 600 mm as in walls/floors etc. over and including 15mm thick screed bed or bedding layers in CM 1:3 set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tiles, complete all as specified and directed. |
| 20 | Dismantling of existing kota slab/stone slabs or tiles of any type complete all as specified and directed. |
| 21 | M&L for granite (any type) 18mm to 20mm thick machine cut in steps, jambs, cooking platform , window cills and similar works over and including 15mm thick screed bed or bedding layers in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone inlcuing grinding and polishing types complete all as specified and directed. |
| 22 | M&L for machine cut cudappah stone slab 20mm to 25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 23 | S&F in repairs 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 24 | S&F in repairs chromium plated/SS grating square slit 150 mm dia with or without waste hole complete all as specified and directed. |
| 25 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 600mm fixing complete all as specified and directed. |
| 26 | M&L PVC (SWR) floor trap plain/multi with grating including jointing with solvent cement 75mm bore complete all as specified and as direcetd. |
| 27 | S&F in repairs 15mm bore stop cock, (angle valve) cast copper alloy, fancy type, chromium plated, screwed down, high pre-ssure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 28 | S&F in repairs 15mm bore bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed. |
| 29 | S&F in repairs 15mm bore stop cock, cast copper alloy, chromium plated with long shank and cut, screwed down, screwed for iron pipe or union complete as specified and as directed. |
| 30 | Taking up or down 25mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 31 | Supplying and laying 25mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 including fittings in trenches complete all as specified with all necessary fittings and fixed complete to wall and ceiling or laid in floors (concealed type) complete all as specified and directed. |
| 32 | Taking up or down 20mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 33 | Supplying and laying 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 including fittings in trenches complete all as specified with all necessary fittings and fixed complete to wall and ceiling or laid in floors (concealed type) complete all as specified and directed. |
| 34 | S&F in repair 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in walls / laid in trenches/floors fixed with or without MS clamp incl necessary bends elbow, tees fittings etc required complete all as specified and directed. |
| 35 | S&F in repairs 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in walls / laid in trenches / floors fixed with or without MS clamp including bends elbow, tees fittings etc required complete all as specified and directed. |
| 36 | S&F in repairs vitreous china urinal, half stall type, white vitreous china urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe, including urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (minimum weight 60gms), flushing cistern and flushing pipe, complete all as directed.Note:- Sample shall be approved by GE before execution |
| 37 | S&F in repairs WHB table top, approved make and size selected quality fixed over granite surface including coupling and waste pipe of PTMT and Bore 32mm having minimum water seal of 25mm (Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and directed. |
| 38 | S&F bottle trap 32mm bore dia of PTMT having minimum water seal of 25mm (Minimum weight 32mm-260gms /40mm-270gms) complete all as specified and directed. |
| 39 | S&F in repairs towel ring stainless steel fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. |
| 40 | S&F in repairs vitreous china wash down water closet 1st quality wall hung with seat cover and trap incl connection to drain pipe or outgoing pipe and MS tube flushing pipe 32mm dia etc complete, waste pipe, sheet covers & fittings (complete set) and fixing complete all as specified and directed. |
| 41 | S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 42 | S&F in repairs 15mm bib cock two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed complete all as specified and directed. |
| 43 | S&F aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 44 | S&F in repairs toilet paper roll holder chromium plated fixing complete all as specified and directed. |
| 45 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab or on wall with suitable arrangement complete all as specified and directed. |
| 46 | S&F in repairs fancy type pillar taps of 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed |
| 47 | S&F veneered decorative plywood, 18mm thick, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work, Partition, cupboard, shutters or etc complete all as specified and directed. |
| 48 | Extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick and 18/19mm wide, fixed with nails complete complete all as specified and directed. |
| 49 | S&F 50mm dia wooden, polished, hard wood knobs fixed with screws complete all as specified and directed. |
| 50 | S&F mild steel, magnetic catches for cabinets of size 50mm complete with striking plate & magnetic stud complete all as specified and directed |
| 51 | S&F approx 350mm long stainless steel telescopic channel fixed in sliding drawer with necessary screws complete all as specified and directed as per approved samples complete all as specified and directed. |
| 52 | S&F 150mm size extruded aluminium handles fancy type polished complete all as specified and directed |
| 53 | S&F 75mm aluminium handles fancy type of approved quality complete all as specified and directed. |
| 54 | S&F in repairs vitreous china urinal partition white of size 310 x 700mm. Urinal partitions slabs terminating about 40cm above floor line, complete all as specified and directed. |
| 55 | S&F liquid soap container of stainless steel fixed with and including chromium plated brass screws and wooden/plastic cleats etc complete all as specified and as directed |
| 56 | S&F latch 150mm with two levers, of mild steel body. stove enamelled finish; with brass knob or lever handle and fixed complete all as specified and directed. |
| 57 | S&F in repairs 25mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 58 | S&F in repairs 32mm waste fittings, for drain out of waste water from glazed ware sinks, basins, etc. complete all as specified and directed. |
| 59 | M&L for factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws, complete all as specified and directed. |
| 60 | M&L for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/stainless steel dash fasteners of required dia and length complete all as specified and directed. |
| 61 | Taking down chowkhats or frames not exc. 1.5 sqm each complete all as specified and directed. |
| 62 | M&L for butt hinges 100mm size, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 63 | M&L for extruded aluminium alloy handles of size 125mm, fabricated type, anodised complete all as specified and directed. |
| 64 | M&L for aluminium anodised, barrel tower bolts 150mm Long of extruded section and fixed complete all as specified and directed. |
| 65 | Dismantling of old broken water storage tank of capacity exc 500 ltrs and n. exc 1000 ltrs complete all as specified and directed |
| 66 | S&F rotational moulded polyethylene water storage tank 1000 ltrs capacity cyllinderical vertical with closed top hoisted and fixed in position at roof or stand all as specified in SSR Part-I including float valve high pressure with polythene float and fly nut complete 25mm pipe dia complete all as specified and as directed |
| 67 | Complete removal of existing treatment on any surface free from dust, loose paint etc complete all as specified and directed. |
| 68 | M&L for 2mm to 3mm thick wall care cement based putty on walls to prepare the surface even and smooth and also filling the cracks, holes etc complete and sanding of the puttied surface with mechanical wall sander to make the surface free from dust etc complete all as specified and directed |
| 69 | M&L for preparing of old distempered surface of walls and applying two coats of oil bound distemper over and including one coat of primer complete all as specified and directed. |
| 70 | M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces complete all as specified and directed. |
| 71 | M&L for preparation of old decorated plastered or unplastered surfaces and applying two coats of white wash on ceiling complete all as specified and directed. |
| 72 | M&L for preparation of old painted surfaces of wood and wood based material of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 73 | M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint (approved tint) complete all as specified and directed. |
| 74 | M&L for preparation of old decorated plastered or unplastered surfaces and applying two coats of white wash on wall complete all as specified and directed. |
| 75 | Demolition of cement concrete (unreinforced) in ground floor n exc 15cm thickness (below or above ground level) complete all as specified and directed |
| 76 | M&L for 150mm thick PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in sub base floor complete all as specified and directed. |
| 77 | M&L for sand filling under floors or in foundation including watering and consolidation as in bedding layers for laying tiles complete all as specified and directed. |
| 78 | M&L for factory made machine pressed precast concrete interlocking paver blocks any shape and size conforming to IS 15658-2006 of 80mm thickness coloured chemically treated PCC (ISI Marked ) M-40 grade of desgin & pattern with grey cement and pigment approved by GE as in footpath and filling of joints with Narmada fine sand complete all as speciified and directed. |
| 79 | M&L for PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in coping including weathering, slightly rounded or chamfered angles and throating, as directed and necessary form work complete all as specified and directed. |
| 80 | M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in plinth protection and similar works finished fair and even laid in bays n.exc 2m in length and joints filled with bitumen mastic 1:3 complete all as specified and directed |
| 81 | Taking down carefully copper/aluminium point wiring from wooden battan/ conduits or from the wall by chasing/cutting (light, fan, socket or power) completely including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc) and making good disturbed surfaces of walls, floor etc complete all as specified and directed. |
| 82 | Taking down old DBs including existing MCCBs and connected items of any make and type from the site and making good surface complete all as specified and directed complete all as specified and directed. |
| 83 | Taking down old submain wiring of any size and make from the site and making good surface complete all as specified and directed complete all as specified and directed by EIC. |
| 84 | Taking down old unsv light fitting,Security light ,bulb of any size and make from the site and making good surface complete all as specified and directed complete all as specified and directed by EIC. |
| 85 | M&L point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall & including rigid PVC conduit FRLS, medium grade ,ISI marked ,terminal box of 1.6 mm thick and its also including various sizes of module plates in white colour and also including provision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm multi stranded copper conductor single core cable connected to common earth dolly complete all as speccified and directed by EIC. Note :- Switch & Socket will be paid separately. |
| 86 | One light/fan point controlled by one way switch |
| 87 | One light point controlled by two way switch |
| 88 | One socket outlet on same board |
| 89 | One 5 pin socket outlet 5 hole 5 Amp independent board |
| 90 | All as per item Ser No 85.00 but copper conductor 2.5 sqmm for 15 amp socket outlet. |
| 91 | All as per item Ser No 85.00 but copper conductor 4.0 sqmm |
| 92 | M&L Submain wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 volts grade in concealed New PVC conduit 25mm dia ISI marked alongwith one run of 6 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main DB and testing on completion etc complete all as directed by EIC.Note: Two runs of 6 sqmm cable and one run of PVC conduit shall be measured as one RM. |
| 93 | M&L for sub main wiring with two run of 4 sqmm size PVC insulated multi stranded copper conductor fire retardanr cable (Nominal area) and one run of 4 sqmm size PVC insulated unsheathed solid core copper conductor cable drawn in either existing or new surface/ recessed steel/ PVC conduit/ PVC casing capping of required size complete all as directed by EIC. Note: Two runs of 4 sqmm cable and one run of PVC conduit shall be measured as one RM. |
| 94 | M&L for sub main wiring with two run of 2.5 sqmm size PVC insulated multi stranded copper conductor FRLS cable (Nominal area) and one run of 2.5 sqmm size PVC insulated unsheathed solid core copper conductor cable drawn in surface/ recessed steel/ PVC conduit/ PVC casing capping of required size complete all as directed by EIC.Note: Two runs of 2.5 sqmm cable and one run of PVC conduit shall be measured as one RM. |
| 95 | M&L in replacement of switch Modular type 6 Amps 1 Way,1 module, 230V AC complete all as specified and directed by EIC. |
| 96 | M&L in replacement of switch Modular type 16 Amps 1Way, 1 module with indicator modular plate light marking 230V AC complete all as specified and directed by EIC. |
| 97 | M&L in replacement of Modular socket outlet 2/3 pin 6 Amp socket 2 module complete all as specified and directed by EIC. |
| 98 | M&L in replacement of Modular socket outlet 2/3 pin 6/16 Amp universal socket 2 module complete all as specified and directed by EIC. |
| 99 | M&L in replacement of switch Modular type 6 Amps 2 Way,1 module, 230V AC complete all as specified and directed by EIC. |
| 100 | Suppy & fixing of MCB Protected Socket 20 Amps , PVC Plastic Base (white) with Plug top & MCB SP 20 amps complete all as specified and directed.. |
| 101 | M&L ceiling rose 3 terminal PVC polycorbonate,isolated body complete all as specified and directed by EIC. |
| 102 | S & F in replacement LED batten luminaire surface/wall mounted ,4 feet 20 Watts comprise of aluminium extruded with anodised with powder coated in white colour with decorative plastic end cap. The luminare is pre-wired with high efficiency electronic driver, with lifetime of 50000 burning hours . CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6000 to 6500K, surge protection DM-4KV & CM-3KV, IP-40 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 140 to 300 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 120 lm/w, filiker free and including connecting up with PVC sheathed suitable size copper conductor with push type cable connector 2/3 pin cable connector from ceiling rose to fitting fixed with 2 years of replacement warranty on fittings complete all as specified and directed by EIC. |
| 103 | S & F in replacement LED batten luminaire surface/wall mounted, 2 feet 10 Watts comprise of aluminium extruded with anodised thermally conductive material with powder coated in white colour with decorative plastic end cap. The luminare is pre wired with high efficacy electronic driver, with lifetime of 50000 burning hours . CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6000 to 6500K, surge protection DM-4KV & CM-3KV, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 140 to 300 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 120 lm/w, filiker free and including connecting up with PVC sheathed suitable size copper conductor with push type cable connector 2/3 pin cable connector from ceiling rose to fitting fixed with 2 years of replacement warranty on fittings complete all as specified and directed by EIC. |
| 104 | S&F 25W High efficient LED Street light fitting with pressure die cast Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie should more than 110lm/W. The color temperature is 6000 to 6500 K with a color rendering index of 70. The luminaire is IP:66 protected. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<10%, High and low protection along with a surge protection of 4 KV including provision of suitable dia GI light grade pipe 1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on wall fixed complete as specified and directed by EIC. |
| 105 | S & F Recess/ceiling mounting as suitable in existing fitting ultra slim 36 W LED 2x2 edge-lit tile in Aluminium Extruded housing with full opal diffuser suitable for perfect lighting conditions for most varied visual tasks in offices and general areas complete all as specified and directed by EIC. |
| 106 | Taking down Ext fan,ceiling fan or other type fan cable end,dismantling blades and removing fan and blades to E/M store. |
| 107 | Supply only Ventilating Fan 250 mm sweep, 900 RPM, non metallic resin body, single phase 230 volts AC 50 Hz and connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all as specified and as directed by EIC. |
| 108 | Supply only ceiling fans complete with blade, down rods, including electronic regulator and accessories rated speed not less than 330 RPM, 230 V, 1200 mm sweep, air delivery not less than 220 CMM with service value not less than 6, BEE five star rated voltage range 140 - 280 volts power factor > .9 and THD < 20 % with brushess direct current motor (BLDC) all as specified and directed by EIC. Note : Down rods length should be as per site requirement. |
| 109 | S&F in replacement of sheet metal enclosure for MCCB VTPN DB 4 way, with 200 A rated bus bar, double door with 100/63 Amp,25 KA,TP MCCB adjustable thermal and fixed magenetic release as incomer (Vertical type double door, 100/63 Amps MCCB rate inclusive) and suitable for SP/TP DB in outgoing, enclosure made up of epoxy powder coated, IP-43 including wooden rectangle board of first quality of suitable size for mounting of DB box with provision for 4 Pole100/63 amp MCCB as incomer (MCCB must be Ics=100% Icu)and SP/TP MCBs as outgoings complete all as specified and directed by EIC |
| 110 | S & F in repair factory made epoxy powder coated Load line Distribution Board TPN-4 ways with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including insulated 200 Amp copper bus bar, Isolated neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one TPN- MCB 63 Amp as incomer complete all as specified and directed by EIC. |
| 111 | S & F in repair of MCB TPN 40 to 63 Amps, 415 V with thimble suitable for existing wires complete all as directed by EIC. |
| 112 | M&L distribution board SPN 12 way double door with 200 Amp rated bus bar double door , IP-43 protection complete all as directed by EIC |
| 113 | S&F in repair amp rating 240V 10 KA'B' curve MCB SPN 32-40 A current currying capacity in the MCB DB complete with connection testing and commissioing complete all as specified and directed by EIC |
| 114 | S&F in repair amp rating 240V 10 KA'B' curve MCB SP 6-32 Amp current currying capacity in the MCB DB complete with connection testing and commissioing complete all as specified and directed by EIC. |
| 115 | M&L for earthing complete with galvanized steel earth plate electrode size 600 x 600 x 6 mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized steel and GI pipe medium grade 20 mm dia bore for watering funnel with wire mesh, 15 mm dia GI pipe light grade for earthing electrode protection, CI cover with frame, PCC chamber pit with PCC (1:3:6 ) type C- 1, 40 mm thick precast RCC M-25 (Design Mix) cover reinforce with 8 mm dia TMT bars @ 10 cm c/c both ways and lifting handle, excavation and earth work all as shown in electrical plate No 3 of SSR Part-I (2009) connected to earthing test (Contd..) |
| 116 | (Description continue from last item)point all as specified or indicated including testing on completion.Note:-(i). Excavation, returning filling and removing of surplus soil is deemed to be included in the unit rate.(ii) Cost of PCC pit, RCC Pit cover with funnel & wire mesh, water pipe, test point is demmed to be included in the unit rate in addition to ItemNo.1(a) to 1(e) of premeable (Notes) under sub-heading earthing, specified in SSR Part-II.(iii) The unit rate also includes the cost of GI earth lead and GI pipe for protection of earth strip up to 7.5 metre (any variation in length shall be adjusted through deviation order).(iv) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate. |
| 117 | Supply,fixing and laying GI tubing medium grade 25 mm bore with all fitting and fixed complete upto water tank incl taking down, complete all as directed by EIC |
| 118 | M/L for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as directed |
| 119 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core,including GI tubing, cable tray complete all as specified and directed |
| 120 | Supply, installlation of cable tray for laying of XLPE Insulated cable, which is made up of GI sheet of thickness 1.5 mm and size of cable tray must be min 200 x 50 mm incl complete fittings on wall/roof all as required on site complete all as specified and directed Please Enable Macros to View BoQ information |
