|
| 1 | Demolition of brick work or stone boulder masonery, built in cement mortor including all quoins arches pillars etc, complete all as specified and directed. |
| 2 | Demolition of cement concrete unreinforecement of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 3 | M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius butt in CM 1:6, complete all as specified and directed. |
| 4 | M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius butt in CM 1:4, complete all as specified and directed. |
| 5 | All as per ser item No 4.00 here-in-above but except bricks. complete all as specified and directed. |
| 6 | M&L for brick work with subclass 'B' old size burnt bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4, complete all as specified and directed. |
| 7 | Taking down cement plaster of any description on bricks, PCC block or stone walls, etc. Including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 8 | M&L for rendering 10 mm thick cement plaster on fair face of brick work or concrete surfaces of wall in cement mortar 1:6, finished even and smooth without using extra cement, complete all as specified and directed. |
| 9 | M&L for rendering 10 mm thick cement plaster on fair face of brick work or concrete surfaces of wall in cement mortar 1:4, finished even and smooth without using extra cement, complete all as specified and directed. |
| 10 | M&L for 15mm thick rendering on fair faces or brick / concrete surfaces in cement mortar 1:4 with using water proofing compund and finishes even and smooth without using extra cement, complete all as specified and directed.Note: WPC shall be measured and paid seperately. |
| 11 | M&L for rendering 15 mm thick cement plaster on fair face of brick work or concrete surfaces of wall in cement mortar 1:6, finished even and smooth without using extra cement, complete all as specified and directed. |
| 12 | M&L for rendering 5mm thick in cm 1:3 on ceiling, finished even & smooth without using extra cement, complete all as per specified and directed. |
| 13 | Supply only integeral water proofing compound. |
| 14 | M&L for two coats of cement base paint over newly plastered surfaces of wall including one coat of primer and preparing surfaces, complete all as specified and directed. |
| 15 | M&L for preparation new decorated surfaces of walls surfaces and applying two coats of cement base paint over one coat of wall care putty over one coat of cement primer, complete all as per specified and directed. |
| 16 | M&L for preparation new decorated surfaces of ceiling surfaces and applying two coats of cement base paint over one coat of wall care putty over one coat of cement primer, complete all as per specified and directed. |
| 17 | M&L for 50mm thick cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection, finished the surface even and smooth with using extra cement, complete all as specified and directed. |
| 18 | M&L for 50mm thick PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in plinth protection, laid in slope in 1:30 in pannels not exc. 2m long, concrete surfaces, finished even and smooth without using extra cement including making ioints, complete all as specified and directed. |
| 19 | Dismantling of wrought iron or mild steel work of any decription not otherwise provided for, complete all as specified and directed. |
| 20 | M&L for two coats of synthetic enamel paint on steel surface over one coat of priming with red oxide zinc chrome of any description over 10cm in width or girth, not otherwise described including preparation of surfaces, complete all as specified and directed. |
| 21 | Taking down chowkats or frames (without taking off shutters from frame) exc 1.50 Sqm and not exc 4.00 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed. |
| 22 | Taking down chowkats or frames (without taking off shutters from frame) not exc 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed. |
| 23 | S&F factory made steel window (box type) with glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc. incl one shop coat of red oxide zinc chrome primer, complete all as specified & shown in drawings. |
| 24 | S&F factory made steel window (box type) without glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc. incl one shop coat of red oxide zinc chrome primer, complete all as specified & shown in drawings. |
| 25 | M&L for pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete all as specified and directed. |
| 26 | M&L for factory made, 2nd class hard wood rail and style 35mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12mm thick veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and directed. |
| 27 | M&L for 18-20mm thick machine cut kota stone slab flooring, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing complete and rounding of edges, laid over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 28 | M&L for 18-20mm thick machine cut kota stone slab as in skirtings, dados, walls, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing complete and rounding of edges, fixed over and including 10mm thick plaster in CM 1:3, complete all as specified and directed. |
| 29 | M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in floors, sub base of floor etc, finished the surface even abd smooth without using extra cement, complete all as specified and directed. |
| 30 | M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in floors, levelling course, staircase including steps etc, finished the surface even abd smooth without using extra cement, complete all as specified and directed. |
| 31 | M&L for machine pressed rubber moulded, manufactured / compacted by vibrating table method precast concrete interlocking coloured paver block, glossy finish, any shape and size, confirming to IS:15658-2006 of 60mm thickness, M-35 grade with grey cement and pigments, complete all as specified and directed. |
| 32 | M&L for sand filling under floors, paver blocks or in foundations including watering, ramming and consolidation, complete all as specified and directed. |
| 33 | Dismantling asbestos cement (corrugated or semi corrugated etc) sheet in roof covering including ridges, complete all as per specified and directed. |
| 34 | S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 35 | S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed self tapping screws, complete all as specified and directed. |
| 36 | M&L for mild steel framed work such as grills, gratings, hold fasts etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, ladders framed balusters and similar work, conforming to Fe-290-0 or Fe-310-0 incl portions framed and hung as gates, pintle hinges, stops, hand made sliding bolts etc. complete all as specified and directed. |
| 37 | S&F in repair PVC (SWR) pipe 110mm dia single socket in any length with rubber ring joints, fixed to wall / floor including PVC clamps, complete all as specified and directed. |
| 38 | M&L for cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in lintels upto 1.50 mtr clean span, cills, plinth courses, coping, kneelers, bonders, cobbles bed plates and the like with plain fair faces including necessary formwork and weathering, slightly rounded or chemfered angles and throating including necessary formwork, complete all as specified and directed. |
| 39 | Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft soil, complete all as specified and directed. |
| 40 | Excavation in trenches in any type of soil, not exc 1.5 mtr deep and not exc 1.5 mtr wide for foundations, manholes, laying of under ground cable, pipe, electric pole etc. and getting out, complete all as specified and directed. |
| 41 | Returning, filling in including spreading, leveling and well ramming in layers not exc 25cm in thick, complete all as specified and directed. |
| 42 | Removing excavated material to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and directed. |
| 43 | M&L for hardcore of broken stone or boulders of gauge not exc 63mm, deposited, spread and levelled in layers not exc 15cm thick including watering and ramming to a true surface, complete all as specified and directed. |
| 44 | Excavating in post holes (or similar holes) each not exc 0.50 Cum, getting out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm thick in any type of soil, complete all as specified and directed. |
| 45 | M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation, mass concrete, filling in etc, complete all as specified and directed. |
| 46 | S&F mild steel joist, channel, angle, or tee sections, fixed independently without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated), conforming to Fe- 290 Gde E- 165, complete all as specified and directed. |
| 47 | Supply only Chain link MS galvanisd fencing, any size or type, complete all as specified and directed. |
| 48 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire, complete all as specified and directed. |
| 49 | Holes drilled up to 12mm dia (and countersunk, if required) depth of holes exc 3mm but not exc 12mm, complete all as specified and directed. |
| 50 | M&L mild steel screw bolts (machine made) 5 to 10mm dia neck with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagona or square nut, not exc 5cm long, complete all as specified and directed. |
| 51 | S&F Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. Note :- Each line wire to be measured and paid. |
| 52 | M&L for preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over and including 2-3mm thick wall care putty and wall primer, complete all as specified and directed. |
| 53 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed. |
| 54 | M&L for mild steel TMT bars 5mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed. |
| 55 | Use and waste of formwork to rough finished concrete soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed. |
| 56 | M&L for RCC 1:1.5:3, type A-1 (nominal mix) (using 20mm graded crushed stone aggregates) as in roof slabs etc, complete all as specified and directed. |
| 57 | M&L for RCC 1:1.5:3, type A-1 (nominal mix) (using 20mm graded crushed stone aggregates) as in columns, pillars etc, complete all as specified and directed. |
| 58 | M&L for RCC 1:1.5:3, type A-1 (nominal mix) (using 20mm graded crushed stone aggregates) as in lintels, beams and roof beams etc, complete all as specified and directed. |
| 59 | Use and waste of formwork to sides of concrete foundations, footings, base of columns, sides anc soffits of plinth beams, sides of pile caps and similar work for rough finished surface of concrete, complete all as specified and directed. |
| 60 | M&L for RCC 1:1.5:3, type A-1 (nominal mix) (using 20mm graded crushed stone aggregates) as in foundation including rafts, footings, foundation, plinth beam,and mass concrete complete all as specified and directed. |
| 61 | Use and waste of formwork to sides and soffits of roof beams . intel beams etc for fair finished concrete surface, complete all as specified and directed. |
| 62 | S&F powder coated anodised aluminium frame for doors windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & directed. |
| 63 | Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections sliding / openable 2 or 3 tier and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, CP brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 64 | S&F 5mm thick tinted sheet glass ordinary quality and glazing with oil putty or wooden beads in square exceeding 0.50 Sqm in each pane, complete all as specified and directed. |
| 65 | S&F powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 66 | S&F powder coated anodised aluminium window and ventilator shutters, side hung type, openable/ louvers, fixed/ sliding type, without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining leats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitings such as peg stays 150mm long (1 No.) hinges type B-21 100mm long (2 Nos) suitable handle (1 No.), complete all as specified and directed. |
| 67 | M&L for rolled mild steel roof trusses (framed) trusses purlin/ cranes/ ganttries, rails & fastening & heavy bracket framing (beam, Tee, angle, channel or flat sections) including distance pieces, cleats etc, conforming to Fe 410 -W (Gde-E- 250) quality-A, complete all as specified and directed. |
| 68 | S&F in replacement of brass chromium plated towel ring, square with round flange, complete all as specified and directed. |
| 69 | S&F in replacement of chromium plated tubular towel rails with lower hanger (stainless steel), complete all as specified and directed. |
| 70 | S&F glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed. |
| 71 | S&F corner glass self (with CP brakets), size 225mm x 225mm, complete all as specified and directed. |
| 72 | S&F in replacement of single lever basin mixture with popup waste with 450mm long baraded hoses for mixing hot & cold water for wash hand basin, cast copper alloy, with dual capstan heads, chromium plated, screwed down high pressure with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe suitable for 15mm bore, complete all as specified and directed. |
| 73 | S&F in replacement of angle valve, brass, chromium plated, fancy type with capstan head handle, screwed down high pressure including CP brass wall flanges, screwed for 15mm bore pipe connection, complete all as specified and directed. |
| 74 | S&F in replacement of bib tap, brass, chromium plated, fancy type, long nose with capstan head handle, screwed down high pressure including CP brass wall flanges, screwed for 15mm bore pipe connection, complete all as specified and directed. |
| 75 | S&F in replacement of two way bib tap, brass, chromium plated, fancy type, long nose with capstan head handle, screwed down high pressure including CP brass wall flanges, screwed for 15mm bore pipe connection, complete all as specified and directed. |
| 76 | S&F fancy type looking mirror of size 1200mm x 900mm with bevelled edge, made of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 77 | S&F in replacement of health faucet, brass, chromium plated with 1000mm long 8mm dia chrome finish flexible pipe with wall hook, complete all as specified and directed. |
| 78 | S&F jet spray, brass, chromium plated, heavy duty including flexible pipe, suitable for 15mm bore water connection for EWC fixed, complete all as specified and directed. |
| 79 | S&F PVC flexible connections, 600mm long 15mm dia with brass flange nuts & washers, complete all as specified and directed. |
| 80 | S&F in replacement of soap dish, brass, chromium plated, heavy duty, fixed to wall with plugs with brass cromium plated screws, complete all as specified and directed. |
| 81 | S&F CP brass grating of 100mm dia, complete all as specified and directed. |
| 82 | S&F toilet paper holder, brass, chromium plated, heavy duty, fixed with brass screws, complete all as specified and directed. |
| 83 | S&F tumbler holder, brass, chromium plated, heavy duty, having suitable recesses made for hanging necessary bath items complete fixed with brass screws as per manufacturer's instructions, complete all as specified and directed. |
| 84 | M&L for 18-20mm thick granite (of any type) work (table rubbed & polished) as in steps, jambs, pillars, window cills, cooking platforms and like, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone, laid over and including 20mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 85 | M&L for 7-8mm thick non skid coloured ceramic tiles (square/ ractangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 86 | M&L for glazed ceramic coloured tiles, size 450x300x7mm / 350x250x7mm as on vertical surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, fixed over and including 10mm thick rendering in CM 1:4, complete all as specified and directed. |
| 87 | S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame, complete all as specified and directed. |
| 88 | S&F in replacement of wash hand basin, vitreous china, counter top type, size 705mm x 460mm x 195mm including cutting for and pinning in ends of brackets or erecting stand including CP waste coupling of 32mm dia and PVC waste pipe of 32mm bore, complete all as specified and directed. |
| 89 | S&F in replacement of vitreous china urinal with spreader and fixing accessories set of size 330mm x 400mm x 600mm, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with including 60mm brass screws, pointing around urinal back in cement, complete all as specified and directed. |
| 90 | S&F in replacement of one peice wash down water closet with UF soft close slim seat cover hinges, sencer and manual operated single flush cistern with necessary fittings and accessories, size 370mm x 670mm x 720mm including 'S' trap of 300mm, complete all as specified and directed.Note :- Make and model of WC shall only be decided and approved by GE. |
| 91 | S&F 5.5mm thick tinted/ plain sheet glass fixed to aluminium section of doors, windows and fixed frame with suitable EPDM rubber packing and powder coated aluminium beading to frame, complete all as specified and directed. |
| 92 | S&F in replacement of door closer of aluminium die cast body, hydraulically regulated designation No. 3, universal type, suitable for door shutters of 851mm to 1000mm in width and of weight between 61 to 80 KG and fixed, complete all as specified and directed. |
| 93 | Taking down eaves gutters and rainwater pipes upto 07 Storey Bldg (23 Mtr Height) of any size or pattern including all fittings, heads, shoes, bends swan necks etc, including necessary arragement for fixing of pipe like scafolding, ladder and all other fittings /accessories, complete all as specified and directed. |
| 94 | S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls/ floor with MS stack clapms, nuts and bolts, complete all as specified and directed. |
| 95 | S&F PVC (SWR) bends with access door any radius, suitable for 75mm bore pipe, complete all as specified and directed. |
| 96 | S&F 15mm bore steel water tubing, medium grade, galvanised with all fittings and fixtures, fixed to wall or ceiling or laid in floors, complete all as specified and directed. |
| 97 | S&F in repair 18/19mm thick PVC board one side decorated laminated, wallnut color / glossy finish of approved color and pattern and other balancing side white in colour, cut to size as required and fixed in position for cabinets etc., complete all as specified and directed. |
| 98 | S&F in replacement of stainless steel zero crank hinges (auto) fancy type (with Euro concealed hinges) fixed to shutters in cupboards of standard size and shape for modular kitchens, complete all as specified and directed. |
| 99 | S&F 200mm size stainless handle, fancy type, complete all as specified and directed. |
| 100 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel staples, complete all as specified and directed. |
| 101 | Taking down carefully old u/s point wiring copper/aluminium (light, fan, call bell socket, and power socket ) complete (fittings such as switches ceiling roses, pendent regulators, sockets, buzzer, T/L fitting any type and size etc.) to be measured and paid for separately removing materials to store for keeping of safe custody and making good the disturbed surfaces, complete all as specified and directed. |
| 102 | Taking down unserviceable/ serviciable MCB DB's including MCBs taking in schedule of credit of any size/rating, complete all as specified and directed. |
| 103 | M&L for point wiring with multi stranded copper condutor 1.5 Sqmm nominal cross section area,single core,PVC insulated and unsheathed FRLS cable 1100V grade,in and including medium grade, PVC concealed conduit ISI marked of dia not less than 25mm and conduilt accessories concealed in wall/roof/floor etc with terminated to new pressed flush metal box and readily available cover with outer plates and inner plates etc for Modular, suitable for mounting modular type switches, sockets fan regulators etc PVC insulated Pmultistranded copper condutor 1.5 sqmm nomina cross section area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dully, complete all as specified and directed with the followings :- One light point / ceiling fan point / exhaust fan point, controlled by one SP switch. |
| 104 | All as per ser item no. 103.00 herein above but for one 3 Pin 5 Amp modular socket on independent board. |
| 105 | All as per ser item no. 103.00 herein above but for one 3 Pin 5 Amp modular socket on same board. |
| 106 | M&L for point wiring for one 5 pin modular socket outlet two 16/6 amps with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multistranded copper conductor of size 2.5 Sqmm drawn through in and including PVC conduit size of not less than 25mm dia, concecled in wall / surface including sutiable new annealed sunken boxes, modular frame and cover plate for fixing of modular switch, socket and regulator along with earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of size 2.5 sqmm including making good disturbed surface to match with existing surface, complete all as specified and directed. |
| 107 | S&F modular switch one module, 5/6/10 Amp, one way, 230 volts AC, complete all as specified and directed. |
| 108 | S&F modular socket 6 amps 5 pin flush type, 240 volts with polycarbonate body, complete all as specified and directed. |
| 109 | S&F modular socket outlet 5 pin 6 & 15 amps, multipurpose 2 in 1, flush type, 230 volts with polycarbonate body, complete all as specified and directed. |
| 110 | S&F modular switch single pole one way 16 Amps, 240 volts with polycarbonate body, complete all as specified and directed. |
| 111 | S&F ceiling rose, 3 phase, PVC / polycarbonate, surface type, 65mm x 50mm, insulated body, three terminal, complete all as specified and directed. |
| 112 | S&F modular electronic fan regulator, step type, two module, 120 watt, 230 Volt and making all necessary connections, complete all as specified and directed. |
| 113 | S&F LED Light fitting 20 watt High-quality materials and design. Extruded aluminium housing enhances safety with High quality PC Diffusers Reliable and robust housing structure, maximize the endurance over the life time slim Integrated design easy to install Efficacy: 110 Im/W and also available in warm white and natural white complete making all connection using 1.5 sqmm copper conductor multistranded PVC insulated twin core flexible cable from ceiling, complete all as specified and directed. |
| 114 | S&F LED Light fitting 10 watt mirror light is a robust and high performance batten This LED luminaire comprises of extruded channel in thermally conductive material High translucent serrated milky white diffuseris used to get glare free and smooth light distribution. Efficacy: 110 Im/W. Also available in warm white and natural white complete making all connection using 1.5 sqmm copper conductor multistranded PVC insulated 2 core flexible cable from ceiling rose to fitting, complete all as specified and directed. |
| 115 | S&F 35 Watt LED building security light fitting with ASTRA NEC building security lights are made up of pressure die cast housing with toughened glass and high power LED's with secondary optics and IP66 protection and with 0.6 mtr long 20/25 mm (as per manufacturer standard) dia GI Pipe in 45 degree bend shape and necessary clamping devices required at site, complete all as specified and directed. |
| 116 | S&F single pole and neutral sheet steel powder coated distribution board for MCBs fitted with bus bar, Neutral link, Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SPN DB system 4 Ways, complete all as specified and directed. |
| 117 | S&F single pole and neutral sheet steel powder coated distribution board for MCBs fitted with bus bar, Neutral link, Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SPN DB system 8 Ways, complete all as specified and directed. |
| 118 | S&F single pole and neutral sheet steel powder coated distribution board for MCBs fitted with bus bar, Neutral link, Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SPN DB system 12 Ways, complete all as specified and directed. |
| 119 | S&F MCB SP, 5 to 32 Amps, 240 Volts, repturing capacity 10 KA, 'C' Series, complete all as specified and directed. |
| 120 | S&F MCB SPN 32 to 63 Amps, 240 Volts, repturing capacity 10 KA, 'C' Series, complete all as specified and directed. |
| 121 | S&F SPN Isolater 40 Amps, 240 V, 50 Hz,10 KA lighting and other domestic loads incl all termnials, fitting etc, complete all as specified and directed. |
| 122 | S&F ceiling fan complete with blades, down rods electronic regulators and accessories 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE 5 star rated with brush less direct current motor (BLDC), complete all as specified and directed.Note : Old u/s exhaust fan of any size and type needs to be deposite to MES store yard being old vintage so that BER case may be initiated as per policy in vogue. |
| 123 | S&F exhaust fans steel body, AC, single phase 230 volts of size 300mm sweep with blades and frame and louver, complete all as specified and directed.Note: Old u/s exhaust fan of any size and type needs to be deposite to MES store yard being old vintage so that BER case may be initiated as per policy in vogue. |
| 124 | S&F exhaust fans steel body, AC, single phase 230 volts of size 450mm sweep with blades and frame and louver, complete all as specified and directed. |
| 125 | M&L for sub main wiring with copper conductor cable two runs of multistaranded 6 Sqmm FRLS PVC ISI marked with all insulated unsheathed in and including PVC concealed conduit 25mm dia medium grade fittings including cutting, chasing and 1x6 Sqmm copper conductor cable FRLS PVC insulated unsheathed multithreaded usinc as continues earth wire, connected to common earth and earth duly, complete all as specified and directed. |
| 126 | M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground evel) with top edge of the plate not less than 1.5 mtr below normal ground leve connected to earth lead wire of Gl wire 4mm dia by means of nuts/bolts and washers check nuts of galvanized iron or steel including 15mm dia GI pipe light grade upto 1.5 mtr below GL for protection pipe, excavation and earth work charcoal dust, commor salt, PCC 1:3:6 type C-1 chamber with cover and RCC 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 6mm dia round bars @ 75mm c/c both way with MS handle 12mm dia PGI funnel and wire mesh all as shown in electrical plate No 5 of SSR Part-l connected to ear thing test point all as specified or indicatec including testing on completion, complete all as specified and directed. |
| 127 | Supply, laying and testing XLPE cable insulated, screened, PVC bedded galvanised stee strip or wire armounded electric power cables (heavy duty) 1100 Volts conductor of size 10 Sqmm 2 Core, complete all as specified and directed. |
| 128 | Supply, laying and testing XLPE cable insulated, screened, PVC bedded galvanised stee strip or wire armounded electric power cables (heavy duty) 1100 Volts conductor of size 16 Sqmm 2 Core, complete all as specified and directed. |
| 129 | M&L for dry sand cushioning to under ground cables provided with a layer of sand 8cm thick before laying the cable and 15cm thick after laying cable & stretching the cable, complete all as specified and directed. |
| 130 | Supply and laying brick, class B, old size, covering as mechanical protection to cable with wel burnt, complete all as specified and directed. |
| 131 | Supply and laying 40mm bore GI pipe light grade with all fittings required for protection of under ground cable including cutting of road surface wherever required and making good to match with existing surface, complete all as specified and directed. |
| 132 | S&F electric water heater storage type ABS body, SS tank with glass line coating upto 2 KW of capacity 25 litre, BEE 5 Star rated complete with all accessories including hot and cold water and heating element connection pipes, complete all as specified and directed.Note :- Old geyser shall be deposite to mes store. |
| 133 | S&F in replacement of surface/recessed mounting LED white/warm light fitting 15 watt LED environmental friendly, new generation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source suitable for armstrong / grid / ceiling, complete all as specified and directed. |
| 134 | S&F decorative wall light stainless steel, rust free fixture with white glass diffuser incluiding suitable light fitting lamp, complete all as specified and directed. |
| 135 | S&F PVC body air freshner fan, copper windind, AC single phase of size 150mm sweep with louver including making necessary hole for fixing of PVC air freshner fan etc, complete all as specified and directed. S&F in repair rigid non - metalic PVC casing caping of 25/12mm inclusive of all elbow, tees,etc complete all as per the direction of Engr-in-Charge. Please Enable Macros to View BoQ information |
