|
| 1 | [13.27]Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. [Through Rate] |
| 2 | [13.32]Providing and fixing bolts including nuts and washers complete. [Through Rate] |
| 3 | [24.1.1]EARTHING AND LIGHTENING ARRESTOR 1. Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. [Through Rate] |
| 4 | [24.1.2]EARTHING AND LIGHTENING ARRESTOR 2. Extra for using salt and char coal/coke for pipe earth electrode as required. [Through Rate] |
| 5 | [24.1.8]EARTHING AND LIGHTENING ARRESTOR 8. Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material. [Through Rate] |
| 6 | [24.2.1]LT CABLE 1. Supply & erection of LT phase separator on LT line complete in all respect up to entire satisfaction of the Engineer-in-charge of the work. [Through Rate] |
| 7 | [24.2.8.14]LT CABLE 8.14. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work.300 sqmm [Through Rate] |
| 8 | [24.3.4.1]HT CABLE 4.1. Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :70 to 120 sqmm [Through Rate] |
| 9 | Supply and erection of PCC pole 9 mtr long as per IS: 1678-1960 specifications, 105mm x 115mm at top and 105mm x 315mm at bottom with working load of 200 Kg. buried 1.80m in ground or as per DHBVNL specification. (Rate without GST) |
| 10 | Supply and erection of PCC pole 11 mtr long as per IS: 1678-1960 specifications, 140mm x 200mm at top and 140mm x 400mm at bottom with working load of 400Kg buried 2.20M in ground or as per DHBVNL specification (Rate without GST) |
| 11 | Supply and Erection of 11 kV G.O. Switch vertical mounted with heavy duty 9 Nos. post insulators suitable, for copper male and female contacts fixed on GI angle frame with G.I. Nut and Bolts including G.I. pipe and operating handle complete in all respect (Rate Without GST). |
| 12 | Supply and erection of 300 Sqmm single core cable un-armored made out of aluminum conductor, 650/1100 Volt confirming to ISS 1554(Part-I) of 1988 IS: 7098/Part-1/1988 with latest amendments and complete in all respect up-to the entire satisfaction of Engineer-in-Charge of the Work. (Rate Without GST).Make – Havells/KEI/Polycab |
| 13 | Supply and erection of 11 KV lighting arrestor set (L.A. Set) as per relevant ISS specification. (Rate without GST) |
| 14 | Supply, Stringing and Sagging 8 SWG G.I. Earth wire complete in all respect to the entire satisfaction of Engineer-in-charge conforming to IS 298/1978 and 7807/1973 and with latest amendment thereof. (Rate without GST) |
| 15 | Supply and erection of L.T. stay set for LT Line complete in all respect with G.I. stay wire( rope of 7 wires of 8 SWG G.I. Wire), egg/Disc insulator , G.I. rod of 20mm dia, 8’ long threaded up-to 250mm long with nut (weight 6.224 kg) with cross of angle of 450mm each made out angle of size 65x65x6 mm(weight 5.33 kg), elbow (weight 2.24 kg ) complete with clamps , nuts and bolts complete in all respect up-to the entire satisfaction to Engineer-in-Charge of the work. (Rate without GST) |
| 16 | Supply and erection of H.T. stay set for HT 11 KV Line complete in all respect with G.I. stay wire( rope of 7 wires of 8 SWG G.I. Wire), egg/Disc insulator , G.I. rod of 20mm dia, 8’ long threaded up-to 250mm long with nut (weight 6.224 kg) with cross of angle of 450mm each made out angle of size 65x65x6 mm(weight 5.33 kg), elbow (weight 2.24 kg ) complete with clamps , nuts and bolts complete in all respect up-to the entire satisfaction to Engineer-in-Charge of the work. (Rate without GST) |
| 17 | Supply and erection of 11 KV pin insulator polymeric type 10 KN with GI pin as per latest specification and approved make by DHBVN. (Rate without GST) |
| 18 | Supply and erection of top hamper suitable for 11 Mtr. long PCC pole and 11KV system made out of MS flat of size 50x6mm (A shape) having approx weight 2.5 kg as per approved design and drawing including primer and alum paint complete all respect. (Rate without GST) |
| 19 | Supply and erection of fuse unit of L.T. side suitable for 25 kva to 200 KVA transformer complete with wooden board, aluminum strips, MS clamp and nut and bolts including all petty material required up-to the entire satisfaction of Engineer-in-Charge. (Rate without GST) |
| 20 | Supply and erection of ACSR conductor of size 80 sqmm (Raccoon) conforming to IS 398 (Part-II) 1976/1996, IS 4826-1976 IS 1521-1972 and IS 1778-1980 with latest amendments including stringing and sagging of conductor as well as jointing and binding with insulator at supports complete in all respect up to the entire satisfaction of Engineer-in-Charge. (Rate without GST) |
| 21 | Supply and erection of ACSR conductor of size 50 sqmm ( Rabbit ) conforming to IS 398 (Part-II) 1976/1996, IS 4826-1976 IS 1521-1972 and IS 1778-1980 with latest amendments including stringing and sagging of conductor as well as jointing and binding with insulator at supports complete in all respect up to the entire satisfaction of Engineer-in-Charge. (Rate without GST) |
| 22 | Supply and erection of V-shape cross arm suitable for 11KV system made of out of 1650mm long MS channel of size 100x50x50x6mm as per design and drawing 2 Nos. 18mm dia holes provided in the base for fixing of half clamp made of MS flat of size 50x6mm and 2 Nos. holes 22mm dia for GI Pin on the flange plate of MS Flat of size 50x6mm shall be provided on the top and bottom flanges of both end of V-shape X-arm with 22mm hole in the plate complete in all respect including primer and aluminum paint. (Rate without GST) |
| 23 | Supply and erection of L.T. Aerial bunched cable of size 120 Sqmm X 4 core with messenger conductor of size 95 Sqmm single core including making of necessary connection of make Polycab/ Havell’s /KEI complete in all respect up to the entire satisfaction of Engineer-in-charge. (Rate without GST) |
| 24 | Supply and erection of 11 KV Disc insulator polymer type with fitting on PCC pole of approved make of State Electricity Nigam ( DHBVN) , confirming to ISS 731/1971 latest amendment thereto complete in all respect (Rate without GST) |
| 25 | Supply and erection of wooden cleats made out of good quality of wood complete with 4 Nos. grooves suitable to pass through 300/400sqmm single core cable complete in all respect up to the entire satisfaction of Engineer-in-charge. (Rate without GST). |
| 26 | Supply and Erection of M.S. D-strap made out of M.S Flat of size 40 x 6mm suitable for LT insulator 90mm x75mm with latest amendments complete in all respect up to the entire satisfaction of Engineer-In-Charge. (Rate without GST). |
| 27 | Supply and Erection of shackle insulator brown glazed of size 90 mm x 75 mm suitable for 415 /240 Volt confirming to IS 1545/1977 with latest amendment thereof complete in all respect up to the entire satisfaction of Engineer-In-Charge. (Rate without GST). Make- as approved by DHBVN |
| 28 | Supply and erection of L.T. underground cable armored PVC insulated and PVC sheathed made out of aluminum conductor, 650/1100 Volt, as per IS 7098(part 1) 1988 with latest amendments loose in existing pipe or trenches complete with necessary connections Make –Havell’s/ KEI/RR/Polycab (Rate without GST). 16 sqmm X 4 core L.T. cable |
| 29 | Supply and Erection of 11 KV (UE) TR-XLPE cable, stranded compact circular, Aluminum conductor, screened with extruded semi-conducting compound, XLPE insulated, galvanized steel flat armoured and overall PVC sheathed cable conforming to ISI 7098 (Part-2) 2011 with up to date amendments, loose in existing pipe or trench including making necessary connections complete in all respect up to the entire satisfaction of Engineer-In-Charge of the work. (Rate without GST) Make –Havell’s/ KEI/Polycab (Rate without GST).H.T. 11 KV (UE) Cable of size 95 sqmm x3 core |
| 30 | Dismantlement of ACSR Conductor 30 mm2 (Rate without GST) |
| 31 | Erection of ACSR Conductor 30 mm2 (Rate without GST) |
| 32 | Erection of ACSR Conductor 50 mm2 (Rate without GST) |
| 33 | Dismantlement of ACSR Conductor 50 mm2 (Rate without GST) |
| 34 | Erection of ACSR Conductor 80 mm2 (Rate without GST) |
| 35 | Dismantlement of ACSR Conductor 80 mm2 (Rate without GST) |
| 36 | Erection of ACSR Conductor 100 mm2 (Rate without GST) |
| 37 | Dismantlement of ACSR Conductor 100 mm2 (Rate without GST) |
| 38 | Erection of GSL No. 8 SWG (Rate without GST) |
| 39 | Dismantlement of GSL No. 8 SWG (Rate without GST) |
| 40 | Erection of cradle guard H.T. and L.T. (Rate without GST) |
| 41 | Dismantlement of cradle guard H.T. and L.T. (Rate without GST) |
| 42 | Erection of 3 phase meters in urban area (Rate without GST) |
| 43 | Dismantlement of 3 phase meters in urban area (Rate without GST) |
| 44 | Dismantlement of single phase meter in urban area (Rate without GST) |
| 45 | Erection of fluorescent tube complete in all respect on the pole ( street light) (Rate without GST) |
| 46 | Dismantling of fluorescent tube complete in all respect on the pole ( street light) (Rate without GST) |
| 47 | Erection of 100 to 200 KVA transformer with pole mounting substation (Rate without GST) |
| 48 | Dismantling of 100 to 200 KVA transformer with pole mounting substation (Rate without GST) |
| 49 | Dismentlement of H.T. Concrete pole. (Rate without GST) |
| 50 | Erection of H.T. Concrete pole. (Rate without GST) |
| 51 | Dismentlement of PCC 9 mtrs. (27”) L.T. pole. (Rate without GST) |
| 52 | Erection of PCC 9 mtrs. (27”) L.T. pole. (Rate without GST) |
| 53 | Supply and erection of 30 sq mm PVC insulated ACSR conductor conforming to IS 398 (Part-II) 1976/1996, IS 4826-1976 IS 1521-1972 and IS 1778-1980 with latest amendments including stringing and sagging of conductor as well as jointing and binding with insulator at supports complete in all respect up to the entire satisfaction of Engineer-in-Charge. (Rate without GST) |
| 54 | Credit/buyback of scrap of M.S. steel items i.e angle , channel, nut and bolts, GSL, Panels , pipes etc. including all labour and machinery required to complete the job complete in all respect. (Rate without GST) Please Enable Macros to View BoQ information |
