|
| 1 | Surface Dressing not exc 15 cm deep and getting out in any type of soil and clearing away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots, and trees not exceeding 30 cm girth (measured one meter above ground level) and removing rubbish complete all as specified and directed. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed. |
| 3 | Excavating in trenches, n exc 1.5 m wide and exc 1.5 m in depth but not exd 3.0 m; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed. |
| 4 | Excavating in trenches not exc 1.5m wide and n.exc 1.5 m in depth, for foundations etc, or for shafts, wells, cesspits, manholes, pier holes etc, n.exc 10 square meter on plan and not exceeding 1.5m in depth and getting out in soft/disintegrated rock complete all as specified and directed. |
| 5 | Removing excavated material exc.to a distance n.exc 50m and depositing where directed by engineer-in-charge. |
| 6 | Returning filling in, including spreading, leveling, watering and well ramming in layers n.exc 25 CM in any type of soil. |
| 7 | M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in cum in foundations, filling and mass concrete complete all as specified |
| 8 | M&L for RCC M-30 (Design Mix) (20mm graded aggregates) as in foundation, footing, mass concrete, foundation beam, plinth beam and base for column complete all as specified and directed. |
| 9 | M&L for RCC M-30 (Design Mix) (20mm graded aggregates) as in Beams, cantilevers, Bressummers, lintels over 1.5m span complete all as specified and as directed. |
| 10 | M&L for RCC M-30 (Design Mix) (20mm graded aggregates) as in Columns, pillars, piers, posts and struts complete all as specified and as directed. |
| 11 | M&L for RCC M-30 (Design Mix) (20mm graded aggregates) as in slabs supported on walls and beams complete all as specified and as directed. |
| 12 | M&L for RCC M-30 (Design Mix) (20mm graded aggregates) as in chajjas complete all as specified and as directed. |
| 13 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces of concrete complete all as specified and as directed. |
| 14 | M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions to form rough finished surfaces of concrete complete all as specified and directed. |
| 15 | Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed. |
| 16 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs n.exc 200mm thick complete all as specified and directed. |
| 17 | M&L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed. |
| 18 | M&L for High strength corrosion resistant TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, beding spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 19 | M&L for High strength corrosion resistant TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 20 | M&L for Brickwork with fly ash modular bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 21 | M&L for Rendering 10mm thick on fair faces of brick work or cement concrete surfaces in cement mortar 1:4 finishing the surface & smooth without using extra cement complete all as specified and as directed. |
| 22 | M&L for Rendering 10mm thick on fair faces of brick work or cement concrete surfaces in cement mortar 1:4 finishing the surface & smooth without using extra cement mixed with integral water proofing compound by 3% weight of cement complete all as specified and as directed.(Note: WPC will be measured and paid separately) |
| 23 | M&L for 5mm thick plaster in cm (1:3) on fair faces of concrete surfaces of ceiling including finishing even & smooth without using extra cement. |
| 24 | Supply only Integral waterproofing compound. |
| 25 | S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates (minimum thickness of powder coating 50 micron) including joining cleat for fixing etc. complete all as specified and as directed. |
| 26 | S&F Anodised aluminium powder coated door shutters (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 27 | S&F powder coated anodised aluminium window and ventilator shutters sliding type without sash (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 Kg/m includingnecessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2 Nos) suitable handle (1 No) and rollers complete all as specified and directed. |
| 28 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 29 | S&F 4mm thick sheet glass ordinary quality & glazing with oil putty or fitted with neporene rubber lining in squares exc.0.50 sqm in each pane complete all as specified and directed. |
| 30 | S&F 5.5 mm thick sheet glass ordinary quality & glazing with oil putty or fitted with beads in squares exc.0.50 sqm in each pane complete all as specified and directed. |
| 31 | S&F 12 mm thick Prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination fixed with screws to timber frame work complete all as specified and directed. |
| 32 | S&F Door closer aluminium (extruded section body) hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg. complete all as specified and directed. |
| 33 | S&F of Mortice Lock of 4 Lever, vertical type of size 100mm made of Brass complete all as specified and as directed. |
| 34 | M&L for preparation new plastered wall surface and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre of two coats over a coat of primer over and including preparation of smooth surface with 1mm thick wall care putty, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. |
| 35 | M&L for preparation of new wall surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. |
| 36 | M&L for applying two coats of white wash including preparaton of new surface on ceiling complete all as specified and directed. |
| 37 | M&L for Moorum/red bajri, filling in floors or pavings, laid in layers n.exc 15 cm thick spread, levelled and rammed including watering complete all as specified and directed. |
| 38 | M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and leveled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 39 | M&L PCC 1:2:4 type B-1 using 20mm graded stone aggregate 75mm thick as in hardstanding/ plinth protection complete all as specified and directed. |
| 40 | M&L for Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed. |
| 41 | M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey pigment cements and pigments, rubber mould vax finished, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed. complete. |
| 42 | M&L PCC 1:3:6 type C-2 using 40mm graded stone aggregate 100mm thick as in sub base/ base of flooring/ Hardstanding/ footpath complete all as specified and directed. |
| 43 | M&L for Cement concrete type B-1, 1:2:4 (20mm graded aggregate) 25mm thick as in base of flooring complete all as specified and as directed. |
| 44 | M&L for Double Charged Vitrified Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes finished fair and even complete all as specified and directed. |
| 45 | M&L for Double Charged Vitrified Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendring in CM (1:4) as in skirting complete all as specified and directed. |
| 46 | M&L for Precast cement concrete in Cover slab type B1 (1:2:4) using 20 mm graded aggregate n.exc 150 mm thick) for man holes, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed. |
| 47 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed. |
| 48 | M&L PCC (1:2:4) type B1 (Using 20mm graded stone aggregate) as in surface channels and drains complete all as specified and as directed. |
| 49 | M&L PCC (1:2:4) type B1(Using 20mm graded stone aggregate) in coping including necessary form work all as specified over existing as well as new wall complete all as specified and as directed. |
| 50 | S&F vitreous china (white) under counter wash hand basin of size 580mm x 430mm incl providing 32mm dia CP wasted coupling, CP bottle trap bracket and making all necessary connections including Fancy CP pillar cock, CP angle cock and PVC connection pipe complete all as specified and as directed. |
| 51 | S&F Steel cup board shutters Godrej pattern double shutters including frame made of 1 mm thick MS sheet incl stiffners, moulding, bending, welding, necessary fittings and locking arrangement as similar to steel cup board and two coats of spray painting over metal putty incl preparation and primer incl fixing to the existing concrete wall. (Approximate size of the cup board 90 cm x 190 cm measurement to be made in Sqm incl frame) complete all as specified and as directed. |
| 52 | S&F Steel cup board shelves Godrej pattern made of 1 mm thick MS sheet incl stiffners, moulding, bending, welding, necessary fittings and two coats of spray painting over metal putty incl preparation and primer incl fixing to the existing concrete wall complete all as specified and as directed. |
| 53 | S&F magnetic catch for cuboard complete all as specified and directed |
| 54 | S&F Powder coated fancy type Stainless Steel curtain rod 25mm dia with suitable SS brackets matching to curtain rod of fancy type all as specified and as directed. [ Additional supporting bracket shall be provided if length is exceeding 1.5m and rate quoted shall include for the same ] complete all as specified and as directed. |
| 55 | S&F for Venetion blind (vertical blind) of fibre strips 100mm wide of superior quality fixed to powder coated aluminium channel with sliding arrangements, pulling arrangements aluminium bracket (rotation of 180 degree louvers made of approved fabric/ colour scotch guard) fixed to wall all as per manufacturer specification complete all as specified and as directed. |
| 56 | S&F continuous (piano) hinges brass width of flaps (when open) 40mm complete all as specified and directed. |
| 57 | S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified and directed. |
| 58 | S&F Tubular towel rail, Brass chromium plated, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 59 | M&L for Granite (of any type) 20mm thick work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed. |
| 60 | S&F of Glazed ceramic coloured tiles in vertical surface 350x250mmx7mm/450X350X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 complete as specified and directed. |
| 61 | M&L PCC 1:2:4 type B1 (using 20 mm graded aggregate) as in roof padding, roof kerbs or mud stops complete all as specified and directed. |
| 62 | M&L for Roof Treatment including the following complete all as specified and as directed:-(i) Preparation of Roof surface by Sweeping clean and washing down with water to remove dust, etc.and brushing with neat cement slurry @ 3.00 kg of cement per Sqm and 30mm thick PCC padding.(ii) 10 mm thick plastering over PCC padding in CM 1:4 on surface mixed with WPC @ 2% by weight of cement as per manufacturers instructions.(iii) Cleaning of plastered surface and applying one coat of hot blown bituminous primer conforming to IS -3384 (latest) @ 0.5 Ltr / Sqm.(iv) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by torch application complete all as specified. Polymeric membrane shall be taken to a height of 30 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing.(v) Applying one coat of bituminous aluminium primer over APP membrane @ 0.11 Lit / Sqm.Note:- (a) Primer, APP membrane & bituminous aluminium paint shall be of same manufacturer and executed through applicator authorised by the approved manufacturer only.(b) Membrane shall be laid with side overlap of 100 mm and end overlap of 150 mm as per manufacturers instruction.(c) PCC 30mm thick Padding & WPC will be measured and paid separately. |
| 63 | S&F CPVC pipes 16mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 64 | S&F CPVC pipes 20mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 65 | S&F CPVC pipes 25mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 66 | S&F PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to walls/ floor complete including clamps for securing pipe complete all as specified and directed. |
| 67 | S&F PVC (SWR) bend with access door of any radius 110mm bore complete all as specified and directed. |
| 68 | Supply, hoisting and fixing in proper position ISI marked multi-layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), of capacity 1000 litres and providing necessary connections complete all as specified and as directed. (Make: Sintex-CCTS-0200-01 or Equivalent as mention in make list in PS.) |
| 69 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose complete all as specified and directed. |
| 70 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense complete all as specified and directed. |
| 71 | Supply spreading in trenches fine dry crushed stone sand for cable protection and punning down gently by hand complete all specified and directed. |
| 72 | Supplying and laying reinforced precast concrete cable cover, class EHV, type 1 with peak, size 250 mm x 150mm x 40 mm complete all specified and directed. |
| 73 | Supply, laying, jointing and testing cable XLPE insulated screened PVC bedded,galvanised steel strip armoured electric power cable heavy duty with stranded aluminium conductor 1100 volt grade, of 4 core 16 sqmm complete all specified and directed. |
| 74 | S&F galvanised tube, light grade, 40mm dia with necessary fittings laid in trenches complete all as specified and as directed. |
| 75 | Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of TPN 40 to 100 AMP and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and as directed. |
| 76 | S&F galvanised tube, medium grade, 25mm dia with necessary fittings laid in trenches/ under floor complete all as specified and as directed. |
| 77 | S&F 25 mm bore dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. Please Enable Macros to View BoQ information |
