|
| 1 | Taking down chowkats or frames (without taking of shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified and as directed . |
| 2 | Taking down chowkats or frames (without taking of shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed . |
| 3 | Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and as directed. |
| 4 | Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each and refixing in same opening after cutting by chishel or hand saw, peeling by plane, fixing/ re-placing of hinges, repairing etc including all nales screws, pieces, small let in for making good where hinges, etc. have been removed from chowkhats or frames, shutters, etc. including painting or oiling to match, if required complete all as specified and as directed.(Note : Hinges shall be measured and paid separately) |
| 5 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing. The door frame shall be tied to the wall using 75/100mm long MS screw as directed . |
| 6 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. M S tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS fram welded/sealed to the stile and rails with suitable PVC sheet beading and jointed together with solvent cement. |
| 7 | S&F for pressed steel frames of size 165X60mm of 1.25mm thick for doors with one or more rebates including necessary fixing lugs. hinges, lock strike plate,etc., complete all as specified and as directed. |
| 8 | S&F for pressed steel frames of size 105X60mm of 1.25mm thick for doors with one or more rebates including necessary fixing lugs. hinges, lock strike plate,etc., complete all as specified and as directed. |
| 9 | S&F for 35mm thick flush shutter, solid core construction, with particle board core and plywood face panels, commercial type on both faces including teak wood beading 6mm thick all around complete all as specified and as directed. |
| 10 | S&F for 35mm thick 2nd class HW plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 11 | M&L for 35mm thick factory made 2nd class HW glazed and skelton shutter and open rebated and prepared to receive glass, gauge etc (without sash bars), edges or framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I Section 8 Clause 8.24 (a) complete all as specified and as directed. |
| 12 | S&F of WPC [Wood Polymer Composite] Door Frame of 100 x 65 single extruded comprising of vingin PVC polymer ofK value 58-60 [suspension grade] Calcium Carbonate and mmn section natural Fibers [wood powder ice huskwheat husk] and non toxic additives (maximum toxicity index 12 for 100 gms fabricated with meter joints atter applving PVC solvent cement and screwed wvith full screws having mìnimum franme density of 750 kg/cum screw withdrawal strength 2200 N [face] & 1100 headed Ss N[edge).minimum compressive strenght of 58 N/mm2 modulus of elasticity 900N/mm2 and resistance to spread of iflame of Class A Category with properties of being termite borer proof, water/moisture proof and fire retardant and fxed in /mm2, position with MS hold fast fasteners of required dia and length complete as per direction of engr-in-charge. |
| 13 | S&F of single extruded WPC(wood Polymer Composite]) Plain with digital printing 30 mm Thick door shutter of required size comprising of virgin polymer of K value 58-60 [suspension gradel. CalciumCarbonate Saural Fibers [wood powder/rice husk/wheat husk] and non toxic additives (maximum toxicity index 12 for 100gms) having density 600 kg/cum and screw withdrawal strength of 1800 N[ face] & 900 N [edgel. minimum nssive strength 50 N/mm2, modulus of clasticity 850 N/mm2 and resistance to spread of flame of Class A Cry with property of bcing termite/borer proof, water /moisture proof and fire retardant and fixing with tainless stecl but hinges of required size with necessary full body threaded star headed counter Sunk S.S serews all as per specification and direction of Engineer-in-Charge. |
| 14 | M&L for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 15 | M&L for preparation of New or previously untreated steel or iron surfaces of any description over 10cm in girth or width and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 16 | S&F for powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 17 | S&F of powder coated aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified. |
| 18 | S&F for powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 19 | M&L for powder coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. |
| 20 | S & F for Stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixedd with tinned tacks or stainless steel wire staples or with wooden beads, stainless steel screws and nuts bolts etc complete fixed as in repair complete all as specified. |
| 21 | M&L for 4.8mm thick sheet glass, ordinary quality and fixed with glazing clips, rubber packing in square in n exc 0.5 sq.m in each pane in each pane complete all as specified and as directed. |
| 22 | M&L for anodised aluminium partition(partly glazed and partly panneled) comprising of aluminium sectionats section 101.04 x 44.45 x 1.5mm thick, shutter top rail 86.17 x 44.45 x 2.3mm, bottom and lock rail 150 X 44.45 X 2.3mm and style 53.7 X 44.45 X 2.3mm and including jointing cleat, aluminium snap beading 20 x 15mm, rubber gasket, glazing clip, and aluminium hardware fittings fixed with steel chromium plated screws, including taking down old aluminium partition complete all as specified and directed.Note:-glass,PVC panel and particle board will be measured and paid seperately. |
| 23 | Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including fillets. |
| 24 | S&F of Prelaminated particle board of 18/19mm thick, interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination with teak wood leaping on exterior face, fixed with screws as in cupboard shutters of bed room, kitchen and internal shelves,aluminium partiton complete all as specified and as directed. |
| 25 | S&F for 30mm width of flaps (When open) continuous (piano) hinges, mild steel, bright finish or electrogalvanised. |
| 26 | S&F in repair magnetic cathes and striking plate for cup board etc complete all as specified and dirrected. |
| 27 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing |
| 28 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing |
| 29 | Dismantling boarding, any description, fixed in any position with nails as specified and directed. |
| 30 | S&F of Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 31 | S&F for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves andscrews at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section(not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed. |
| 32 | M & L for Seamless calcium silicate ceiling 8mm thick made out of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) complete all as specified and as directed by the Engineer-in-Charge. |
| 33 | S&F in repair 100 mm aluminium anodised barrel tower bolts, of extruded section all as specified and directed |
| 34 | S&F in repair 150 mm aluminium anodised barrel tower bolts, of extruded section all as specified and directed |
| 35 | S&F in repair 300mm aluminum anodised sliding door bolts, with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast alluminium alloy complete all as specified and directed. |
| 36 | S&F in repair aluminium butt hinges of 75 mm size medium weight fixed to existing frame complete all as specified and directed |
| 37 | S&F in repair mild steel butt hinges of 100 mm size medium weight cold rolled by welding to existing frame complete all as specified and directed |
| 38 | S&F of Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm , having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N (Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel auto hinges of required size with necessary full body threaded star headed counter sunk SS Screws.All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory providedby the manufacturing company : For WC/Bathroom/Toilet/Kitchen/Balcony Doors & Cabinets. |
| 39 | S & F of MDF Board 18-19 mm thick of any size provided with shelves, partitions,cupboard door and glass shutters with stainless steel ISI marked fittings as auto hinges (02 Nos in each shutter), ss fancy handles (01 No in each shutter ) & magnetic locks and any other fittings required, shape/pattern complete all as specified & directed by Engineer -in -Charge all as specified & directed by Engineer -in -Charge. |
| 40 | S&F in repair chromium plated soft close zero crank hinges for kitchen cabinets,cupboard etc. complete all as specified and directed |
| 41 | S&F in repair 100mm SS handles for kitchen cabinets,cupboard etc complete all as specified and directed |
| 42 | S&F in repair 75mm SS handles for kitchen cabinets,cupboard etc complete all as specified and directed |
| 43 | S&F in repair 100 mm size extruded aluminum alloy handles, fabricated type anodized complete all as specified and directed |
| 44 | S&F in repair 150 mm extruded aluminum alloy handles, fabricated type anodized complete all as specified and directed |
| 45 | S&F in repair 100 mm long safety type aluminium anodised hasp and staple with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 46 | S & F in repairs mortice lock brass 4 levers vertical type with handle, size 100mm complete all as specified and as directed. all as specified and directed approved by accepting officer |
| 47 | S&F in repair 25mm dia stainless steel curtain rod with fancy type fixing brackets, stops, rollers,lattu etc. complete all as specified and directed by Engr-in-charge.(Note : Entire work will be done/ executed in patches of any qty and any size all as specified by Engr-in-charge) |
| 48 | S&F in repair floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140 mm anodised with hard drawn steel spring, fixed in floors complete all as specified and directed. |
| 49 | S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised staples complete all as specified and directed. |
| 50 | Hacking out old broken glass [any thickness, size, quality or description] from metal frames including punching or drilling out old glazing pins / spring clips complete all as specified and as directed. |
| 51 | S&F in repairs sheet glass 3.0 mm thick ordinary quality and glazing with oil putty in squares not exc. 0.50sqm in each pane complete all as specified and directed. |
| 52 | S&F in repairs 3.00 mm thick figured glass pin head type obscured or frosted on one side and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed |
| 53 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box , main body with stainless steel cover, govering pivot made of brass, other parts made of mild steel heavy duty including taking down of onld one and fixed . complete all as specified and directed. |
| 54 | S&F in repair aluminium( Extruded section) body door closer hydraulically regulated , designation No. 3 universal type , suitable for door shutterof 851 to 1000mm in width complete all as specified and directed. |
| 55 | Dismantling, floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed |
| 56 | Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and as as directed. |
| 57 | Demolition of cement concrete un -reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified. |
| 58 | M&L for 25mm thick cement concrete type B-1, 1:2:4 (20mm grade aggregate) as in levelling coarse in flooring finished even and fair under floor finishes. |
| 59 | M&L for Glazed ceramic glossy finish tiles coloured in vertical surface 450X300X7mm in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified. |
| 60 | M&L for Non Skid ceramic tiles colour tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified. Note : Work will be in patches or in bulk |
| 61 | M & L for Non-skid ceramic premium quality coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 15 mm thick screed in cement mortar (1:6) over and pointed in white cement with pigment to match the colour of tiles complete all as specified. |
| 62 | All as per Sl item No. 62.00 here-in-above but in skirting over 10mm thick backing coat in CM (1:4) complete all as specified and directed. |
| 63 | M & L for Single charge, stainfree, vitrified tiles, Premium (1st) quality straight edge, coloured tiles 600 X 600 mm and 9-10 mm thick, as in floors etc. in any pattern of light coloured tiles as in approved shade, set & jointed in neat cement including and over 15mm th screed bed in CM (1:6) and pointed in white coloured cement to match, in floors etc. complete all as specified. |
| 64 | All as per Sl item No. 63.00 here-in-above but as in skirting over cement mortar backing plaster in CM1:3 10mm thick |
| 65 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar. Note : Work will be in patches or in bulk |
| 66 | M & L for Granite of black / green / imperial red (colour as approved by Accepting Officer) of any type machine cut as in shelves/steps/counter tops, 20 mm thick, set and jointed in cement slurry over & including screed of 15 mm thick / rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab or with suitable adhesive for fixing on unpolished kota stone slabs and including rubbing, cutting and mirror type polishing and bull nose on exposed sides complete all as specified .Note : Single piece should be used in steps/cills/jambs/shelves or equivalent as approved by accepting officer . |
| 67 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified. |
| 68 | M & L for Machine cut kota stone slab flooring 20-25mm thick over, laid over cement screed base , jointed and pointed with grey cement slurry mixed with pigment over 20mm thick cement mortar 1:6 screed bed to match the shade of the slab including rubbing and polishing complete all as specified and directed. Note : Work will be in patches or in bulk |
| 69 | M & L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar over 10 mm thick cement plaster 1:3 jointed and pointed with grey cement slurry mxed with pigment to match the shade of the slab including rubbing and polishing complete, all as specified and directed. |
| 70 | M&L for Kota stone slab 20-25mm thick (in single piece as vertical support and horizointal base for granite top) laid over 15mm thick screed bed in cm 1:6in cooking platform, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified and as directed. |
| 71 | Taking up or down GI tubing 15 mm bore from trenches/wall including all fittings segregated and stacking the pipe complete all as specified and directed. |
| 72 | All as per Sl item No. 71.00 here-in-above but 20 mm dia bore |
| 73 | All as per Sl item No. 71.00 here-in-above but 25 mm dia bore |
| 74 | S&F GI pipe medium grade 15mm bore fixed to wall wall and ceiling or laying in floors, with all new fittings as required at site complete |
| 75 | All as per Sl item No. 74.00 here-in-above but 20 mm dia bore |
| 76 | All as per Sl item No. 74.00 here-in-above but 25 mm dia bore |
| 77 | S&F in repairs 20 mm CPVC Pipe SDR 11 & Plain CPVC SDR 11 Fittings such as Tee, Elbow, nipple and small piece of pipe in trenches or fixed to wall/Ceiling complete all as specified and as directed by Engineer-in-Charge |
| 78 | All as per Sl item No. 77.00 here-in-above but 25 mm dia bore |
| 79 | Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc of capacity exc 500 ltr but n exc 1000 ltr including written date of cleaning complete all as specified and directed. |
| 80 | Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc of capacity exc 250 ltr but n exc 500 ltr including written date of cleaning complete all as specified and directed. |
| 81 | S&F in repairs including disconnecting tanks ,1000 Ltrs Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I |
| 82 | S&F in repairs including disconnecting tanks ,S&F 500 Ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I |
| 83 | S&F in repair Chromium plated fancy type bib taps with wall flange, cast copper alloy with round operating knob screwed down high pressure, screwed for 15mm bore iron pipe complete all as specified and directed. |
| 84 | S&F in repair15mm bore pillar taps fancy type cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed. |
| 85 | S&F in repairstop valves/angle cocks or two way angle cock cast copper alloy concealed type long body with round operating knob fency type chromium plated screwed down high pressure, screwed both ends for 15 mm bore iron pipe or brass ferrule. |
| 86 | S&F in repair two way angle cock cast copper alloy concealed type long body with round operating knob fency type chromium plated screwed down high pressure, screwed both ends for 15 mm bore iron pipe or brass ferrule. |
| 87 | S&F in repair self closing taps, suitable of urinal etc. cast copper alloy e long body with round operating knob fency type chromium plated screwed down high pressure, screwed both ends for 15 mm bore iron/PVC pipe or brass ferrule. |
| 88 | S&F in repair chromium plated brass sprindle suitable for 15 mm concelled type stop cock / angle cock / Pillar tap/ Bib tap complete all as specified and directed. |
| 89 | S&F in repair 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and complete all as specified and directed. |
| 90 | S&F in repair 15mm bore PTMT Bib taps standard any colour screwed down for iron pipe and fixed minimum weight 90 gm complete all as specified and directed. |
| 91 | S&F in repair 15 mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210gms) complete all as specified and directed. |
| 92 | All as per Sl item No. 91.00 here-in-above but 20 mm dia complete all as specified and directed. |
| 93 | All as per Sl item No. 91.00 here-in-above but 25 mm dia complete all as specified and directed. |
| 94 | S&F in repair 32 mm dia waste coupling chromium plated brass, for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed including taking down old coupling of any description complete all as specified and directed. |
| 95 | S & F in repairs Stainless steel gratings with frame, 140 mm dia, with hole for waste pipe connection all as specified and as directed. |
| 96 | S&F in repair PVC connection pipe 15mm dia and 600 mm long with two PTMT nuts at each ends with rubber washer |
| 97 | M&L for 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with washers chromium plated brass screws and cup and washers complete all as specified and directed |
| 98 | S&F in repair PVC EWC anti microbial seat cover hygenic type for padestral pattern including all fitting complete all as specified and directed. |
| 99 | S&F in repair CP soap dish (Any Type) fixed to wall with brass chromium plated screws complete all as specified and directed. |
| 100 | S&F in repair chromium plated toilet paper holder complete all as specified and directed. |
| 101 | S&F in repair chromium plated shower rose with swivel joints including fixing to GI pipe for 125mm dia complete all as specified and directed. |
| 102 | S&F in repair 350 x 450 mm size cabinet mirror rectangular shape with 4 mm thick selected quality mirror and PTMT frame with openable door sutter with PTMT frame outside mirror as framed complete all as specified and directed. |
| 103 | S&F in repairs for PVC low level flushing cistern, white, 10 Ltrs capacity complete with all internal accessories & fixed to wall & making good to wall surfaces incl. taking down existing flushing cistern complete. |
| 104 | S&F in repair round moulded PVC water tank lid for specially 500 Ltrs, 1000 Ltrs complete all as specified and directed. |
| 105 | S&F in repair mild steel helical door spring 300mm ordinary rat tail rod pattern springs including roller plate complete all as specified and directed. |
| 106 | S&F in repair glass shelf(600x150mm) with chromium plated guard complete all as specified and directed. |
| 107 | S&F in repair 20 mm dia D type CP towel rail 600 mm long between flanges complete all as specified and directed. |
| 108 | S&F in repair CP towel Ring complete all as specified and directed. |
| 109 | S&F in repair 32 mm dia flexible waste pipe for wash basin and kitchen sink complete all as specified and directed. |
| 110 | S&F in repairs Vitreous China wash down water colset (Squat pattern) white complete as fixed in repair excluding flushing cistern and flush pipe \\"Orissa\\" pattern size 580x400 with integral footrest inject connection to trap antisyphonage etc complete incl joint between flushing pipe and socket of WC. |
| 111 | S&F in repairs Vitreous China wash down water closet (EWC) (pedestal pattern)white complete as fixed in repair excluding flushing cistern and flush pipe and trap white including fixing bolts,WC seat cover of fixed with aluminium or ms chromium plated complete all as specified. |
| 112 | S&F in repairs Vitreous China wash hand basin, angle back 550 x 400mm white excluding taps, waste chains and plugs and porcilain stopper but including bracket |
| 113 | S&F in repairs 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall complete all as specified and directed |
| 114 | S&F in repairs 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall complete all as specified and directed |
| 115 | S&F in repairs 110 mm dia PVC (SWR) bends of any radius with access door complete all as specified and directed |
| 116 | S&F in repairs 75 mm dia PVC (SWR) bends of any radius with duck foot or heel rest fitted with oval access door complete all as specified and directed. |
| 117 | S&F in repairs 110 mm dia PVC (SWR) junctions single (Single T )equal or unequal complete all as specified and directed |
| 118 | S&F in repairs 75 mm dia PVC (SWR) junctions single (Single T )equal or unequal complete all as specified and directed |
| 119 | S&F in repair PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc complete. |
| 120 | S&F in repairs sinks with draining board made of stainless steel 1 mm thick kitchen with plugs , washers and waste , including bedding in cement mortar on to dwarf wall or including fixing cantiliver brackets and connecting union to pipe , overall size 915mm x 460 mm & bowl size 410mmx330mm x 160mm complete all as directed. |
| 121 | S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes;including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 122 | S&F in repair stainless steel kitchen rack made of 0.63 mm thick stainless steel sheet of size 900 mm x 600 mm x 250 mm fixed to wall with screws complete all as specified and directed. |
| 123 | S&F in repair of CP Health faucet complete set with 1.25 mtr long pipe abd fittings complete all as specified and as directed. |
| 124 | S&F in repair of CP Jet spray complete set with 1.25 mtr long pipe and fittings complete all as specified and as directed. Make Cera and equivalent |
| 125 | S&F in repairs CI brackets 450mm long made with IAS 25x3mm suitable for wash hand basin complete all as PTMT complete all as specified and approved |
| 126 | S&F in repairs brass CP wall mixer for mixing hot & cold water three way screwed down for iron pipe 15mm bore and fixed complete |
| 127 | S&F in repair sheet glass corner wall mounted shelf assembly consisting of 5.50 mm thick sheet glass 220mmX220mm size with chromium plated bracket guard and railing 50mm high complete all as specified and as directed. |
| 128 | S&F necessary weldings in Repairs 2.5 cm but n exc 5cm thick of metal to be welded n. exc. 6 mm complete all as specified and directed. |
| 129 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete |
| 130 | M & L for rendering 15mm thick in CM (1:4) on brick and concrete surfaces finished even and smooth without using extra cement |
| 131 | M&L for Ready mix plaster in cement mortar ( 1:6) , 15mm thick on other than fair faces of brick work or stone surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 132 | M & L for rough cast plaster over 10mm thick cement plaster in CM 1:4 on stone/ brick masonary wall surfaces complete all as specified and directed. |
| 133 | Complete removal of existing treatment of any type/description such as oil bound distemper etc from internal surfaces of walls with mechanical means/grinder and M&L for Applying two coat of oil bond distemper over a coat of alkali resistance primer over a coat of wall care putty (to an average thickness of 1mm )thick including necessary scaffolding arrangement as required at site all as specified and directed. |
| 134 | M&L for preparation of new plastered surfaces of external walls/RCC surfaces/soffits of chajjas/roof projection/cantilivers/balcony etc including cornices and applying two coat of cement base paint @ 5sq.m/kg/1 coat over a one coat of of external primer by using following brands of cement base paint complete all as specified & as directed by engr-in-charge. Please Enable Macros to View BoQ information |
