Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Tender Inviting Authority: , Superintending Engineer Municipal Corporation Ludhiana 2.0 NAME OF WORK:- CONSTRUCTION OF URBAN WATER & WASTE MANAGEMENT OFFICE BUILDING (B+3 STOREY) (UNDER WORLD BANK PROJECT) HAMBRAN ROAD AT LUDHIANA (PUNJAB) Contract No: Bidder Name: Less (-) 0.0 % Less (-) SCHEDULE OF WORKS Excess ( + ) Sl.No. Description of work No.orQty. Unit Estimated Rate AMOUNT Rs. P RATE TO BE QUOTED BY BIDDER Total Amount quoted by bidder -1.0 Figure Words A1 0.0 Construction of Urban Water, Waste Management office Building (B+3 Storey) in RCC Frame Structure 0.0 0.0 0.0 0.0 0.0 |
| 2 | 6.8a (i) |
| 3 | 14.131 |
| 4 | 10.11 (b) (ii) |
| 5 | 10.17 |
| 6 | 10.22 0.0 Note :- As per CSR preface note-21, In case of works below ground level like basement of buildings and public health works such as sewers, disposal works etc, the rates upto a depth of 4 metres below ground level, shall be the same as for work in superstructure in first storey. hence rate for First Storey have been adopted for this component. 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 |
| 7 | 11.3i |
| 8 | 10.20 |
| 9 | 0.0 7.1.3 10.48 Extra rate for First Floor 0.0 0.0 0.0 0.0 0.0 4.88 Cum 181.0 0.0 181.0 0.05 190.68 Rupees One Hundred Ninety And Sixty Eight Paise Only 930.52 0.0 7.1.5 10.48 Extra rate for Second Floor 0.0 0.0 0.0 0.0 0.0 4.1 Cum 362.0 0.0 362.0 0.05 381.37 Rupees Three Hundred Eighty One And Thirty Seven Paise Only 1563.62 0.0 |
| 10 | 10.45 |
| 11 | 10.46 |
| 12 | 10.46 b |
| 13 | 11.4i |
| 14 | 11.29 (a) |
| 15 | 11.29 (a) |
| 16 | 11.29 (a) |
| 17 | 11.29 (a) |
| 18 | 11.75 |
| 19 | 11.29 (a) |
| 20 | 11.29 (a) |
| 21 | 11.29 (a) |
| 22 | 11.29 (a) |
| 23 | 11.34 |
| 24 | 11.29 c |
| 25 | 11.29 c |
| 26 | 11.29 c |
| 27 | 15.10 |
| 28 | 15.84 |
| 29 | 15.84 |
| 30 | 15.84 |
| 31 | 15.21 |
| 32 | 15.84 |
| 33 | 15.84 |
| 34 | 15.84 |
| 35 | 15.84 |
| 36 | 15.84 |
| 37 | 15.84 |
| 38 | 15.84 |
| 39 | 15.20 |
| 40 | 15.84 |
| 41 | 15.84 |
| 42 | 15.84 |
| 43 | 15.84 |
| 44 | 13.74a |
| 45 | 13.75 |
| 46 | 13.76 |
| 47 | 13.45 |
| 48 | 13.51 |
| 49 | 30.76 (b) |
| 50 | 13.13i |
| 51 | Note vii Ch-13 |
| 52 | 13.55 |
| 53 | 33.09b |
| 54 | 13.78 |
| 55 | 33.14 |
| 56 | 13.89 |
| 57 | 33.10b |
| 58 | 14.11 |
| 59 | 14.88 |
| 60 | Note iv Ch-14 |
| 61 | Note iv Ch-14 |
| 62 | 14.75 |
| 63 | 14.76 |
| 64 | 14.89b |
| 65 | Note iv Ch-14 |
| 66 | Note iv Ch-14 |
| 67 | 14.101 |
| 68 | 14.135 |
| 69 | 14.115 (a) |
| 70 | Note iv Ch-14 |
| 71 | Note iv Ch-14 |
| 72 | Note iv Ch-14 |
| 73 | 14.120a |
| 74 | 14.116 |
| 75 | Note iv Ch-14 |
| 76 | Note iv Ch-14 |
| 77 | 18.39 |
| 78 | 17.45 |
| 79 | 18.48 |
| 80 | 17.96 |
| 81 | 33.16 |
| 82 | 17.47 |
| 83 | 17.95 |
| 84 | 18.59 |
| 85 | 17.27 (a) (iv) |
| 86 | 17.91 |
| 87 | 17.108i |
| 88 | 17.77 |
| 89 | 17.44 |
| 90 | 17.22(ii) |
| 91 | 17.22iv |
| 92 | 17.109 |
| 93 | 17.97 (i) |
| 94 | 17.23 (ii) |
| 95 | 17.43 |
| 96 | 18.18 |
| 97 | 18.35 |
| 98 | 18.35 |
| 99 | 18.35 |
| 100 | CSR Anal |
| 101 | 18.52 |
| 102 | 13.18 |
| 103 | 13.21 |
| 104 | 10.51a |
| 105 | 9.162 B 0.0 Hardware Accessories:Fire doorset assembly shall be provided with one number fire rated SS 304 shaft mortise dead lock, one number 50-80 mm Back Set with minimum 20 mm Square forend with allen key including SS304 dead strike plate conforming to IS: 16015:2022/EN 12209, one number recessed flush pull handle (SS304) of minimum size 40 mm x 120 mm, as approved by Engineer-in-Charge.Finishing:Both frame and door shutters shall be factory finished with polyester powder coating of minimum 50 microns thick and shall have passed salt spray test as per IS:13871 of approved colour and shade all complete as per manufacturer’s specifications and as per direction of the Engineer-in-charge.Installation:The hollow space in the door frame shall be filled / injected with fire rated self extinguishing type polyurethane foam (PUF) after installation at site of work. The rate shall be inclusive of complete fire rated door assembly, supply and installation by the approved manufacturer. 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 |
| 106 | 9.162 B.1 |
| 107 | CSR Analy |
| 108 | 13.80 |
| 109 | 13.86 |
| 110 | 13.66 |
| 111 | 13.72 |
| 112 | 13.77 |
| 113 | MR Analy |
| 114 | MR Analy |
| 115 | 16.69 |
| 116 | 16.65 |
| 117 | 16.31 |
| 118 | 16.63 |
| 119 | 16.10 |
| 120 | 16.59 |
| 121 | 16.58 |
| 122 | 10.6 b ii |
| 123 | 15.10 0.0 Total A1:- 0.0 0.0 0.0 0.0 0.0 89814678.66 0.0 A2 0.0 Construction of Check Post 0.0 0.0 0.0 0.0 0.0 |
| 124 | 10.9 bii |
| 125 | 11.3i |
| 126 | 10.26 |
| 127 | 11.4i |
| 128 | 10.20 |
| 129 | Note-ii of Ch.-9 |
| 130 | 15.10 |
| 131 | 15.21 |
| 132 | 15.20 |
| 133 | 13.74 |
| 134 | 13.75i |
| 135 | 13.76 |
| 136 | 13.45 |
| 137 | 13.51 |
| 138 | 30.76 (b) |
| 139 | 13.13i |
| 140 | 13.55 |
| 141 | 18.50 |
| 142 | 18.38 |
| 143 | 18.27 |
| 144 | 18.25 (b) |
| 145 | 18.26 |
| 146 | Analy |
| 147 | 6.8a (i) |
| 148 | 14.84 |
| 149 | 14.86 |
| 150 | 14.142 |
| 151 | 14.87 |
| 152 | 17.27 (a) |
| 153 | 17.23 (ii) |
| 154 | 17.49 (a) |
| 155 | 18.18 |
| 156 | 16.15 |
| 157 | 16.16 |
| 158 | 16.20 |
| 159 | 16.17 |
| 160 | 16.69 |
| 161 | 16.65 |
| 162 | 16.60 |
| 163 | 10.6 b ii |
| 164 | 11.35 |
| 165 | Analy |
| 166 | 15.10 0.0 Total A2:- 0.0 0.0 0.0 0.0 0.0 286669.14 0.0 A3 0.0 Construction of Meter Room & HT Panel Room (Single Storey) in load bearing brick Structure 0.0 0.0 0.0 0.0 0.0 |
| 167 | 10.11 b ii |
| 168 | 10.16 |
| 169 | 11.3i |
| 170 | 11.4i |
| 171 | 11.29 (a) |
| 172 | 10.21 |
| 173 | 13.74a i |
| 174 | 13.75i |
| 175 | 13.76 |
| 176 | 13.45 |
| 177 | 13.51 |
| 178 | 30.76 b |
| 179 | 13.13(i) |
| 180 | 13.55 |
| 181 | 6.8a (i) |
| 182 | 15.10 |
| 183 | 15.21 |
| 184 | 15.20 |
| 185 | 14.84 |
| 186 | 14.86 |
| 187 | 14.59 |
| 188 | 18.24 |
| 189 | 18.38 |
| 190 | 18.27 |
| 191 | 18.25 (b) |
| 192 | 18.26 |
| 193 | 18.11 (a) |
| 194 | 18.11 (b) |
| 195 | 17.27 (a) (iv) |
| 196 | 17.23 (ii) |
| 197 | 17.49 (a) |
| 198 | 18.29 |
| 199 | 18.18 |
| 200 | 16.65 |
| 201 | 16.10 |
| 202 | 16.59 |
| 203 | 16.15 |
| 204 | 16.16 |
| 205 | 16.20 |
| 206 | 16.17 |
| 207 | 10.6 b ii |
| 208 | 15.10 0.0 Total A3:- 0.0 0.0 0.0 0.0 0.0 1814530.22 0.0 A4 Providing Furniture & Furnishing of Buildings |
| 209 | Reception Table (L Shape) |
| 210 | Officer Table with side table (L Shape) |
| 211 | Office Chair (Low Back) |
| 212 | Office Chair (Mid Back) |
| 213 | Office Chair (High Back) |
| 214 | Discussion Table with 4 Chairs (3' dia) |
| 215 | Computer Table 4' x 2' |
| 216 | Office Chair/ Computer Chair |
| 217 | Visitor Chair |
| 218 | Sofa (1-Seater) |
| 219 | Sofa (2-Seater) |
| 220 | Sofa (3-Seater) |
| 221 | Sofa (5-Seater) |
| 222 | Side Table of Sofa (18\\" x 18\\") |
| 223 | Center Table of sofa (3' dia) |
| 224 | Work Station |
| 225 | Dining Table Round - Gazebo (3' dia) |
| 226 | Dining Table Square (3' x3') |
| 227 | Dining Chair |
| 228 | Waiting Bench with Latherite Seat (3-Seater) |
| 229 | Almirah 78\\" X 36\\" X 19\\" deep of office record |
| 230 | Conference Table 20' x 6' |
| 231 | Conference Chair |
| 232 | Bed(Single) Dormitory |
| 233 | Side Table of Bed in Dormitory |
| 234 | Double Bed in Suit |
| 235 | Bed Side Table in Suit |
| 236 | Assembly Area Total A4:- 33000057.0 0.0 B 0.0 Outer Infrastructure 0.0 0.0 0.0 0.0 0.0 B1 0.0 Construction of B/wall with RCC pillar around Campus 0.0 0.0 0.0 0.0 0.0 |
| 237 | 10.9 bii |
| 238 | 10.15 |
| 239 | 10.21 |
| 240 | 18.18 |
| 241 | 11.75 |
| 242 | 15.20 |
| 243 | 16.60 |
| 244 | 16.20 |
| 245 | 16.17 0.0 Total B1 0.0 0.0 0.0 0.0 0.0 6639876.91 0.0 B2 0.0 Construction of Parking/pavement & Footpath 0.0 0.0 0.0 0.0 0.0 |
| 246 | CSR Analy |
| 247 | 24.5 (a) |
| 248 | 10.9 bii |
| 249 | 24.13 |
| 250 | 14.137 |
| 251 | 14.141 |
| 252 | 24.41 |
| 253 | 14.135 |
| 254 | 16.31 |
| 255 | 16.17 0.0 Total B2 :- 0.0 0.0 0.0 0.0 0.0 4200341.25 0.0 B3 0.0 Providing of Information, Safety Sinage & Emergency Exit for Universal Accessibility 0.0 0.0 0.0 0.0 0.0 |
| 256 | Drived from CSR 24.46 +18.39 |
| 257 | Drived from CSR 24.46 & 18.39 |
| 258 | Drived from CSR 24.46 & 18.39 |
| 259 | MR Analy |
| 260 | MR Analy |
| 261 | MR Analy |
| 262 | MR Analy |
| 263 | MR Analy |
| 264 | 24.57 0.0 Total B3:- 0.0 0.0 0.0 0.0 0.0 1783147.94 0.0 Total A1+A2+A3+A4+B1+B2+B3:- 137539301.12 0.0 PUBLIC HEALTH SERVICES 0.0 Sub Work-1 0.0 0.0 0.0 0.0 0.0 0.0 Sub Head-1 Internal Sewerage System 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 |
| 265 | 30.74 (iii)B |
| 266 | 30.81 (iii) |
| 267 | 30.77c |
| 268 | 30.78 |
| 269 | MR Analy |
| 270 | MR Analy |
| 271 | 30.99 |
| 272 | 28.12 |
| 273 | (B) b 0.0 Total Sub Head-1:- 0.0 0.0 0.0 0.0 0.0 721734.87 0.0 0.0 Sub Head-2 Internal Water Supply System 0.0 0.0 0.0 0.0 0.0 |
| 274 | 28.19 |
| 275 | 30.85a |
| 276 | 28.56 |
| 277 | Analy |
| 278 | Analy |
| 279 | e 0.0 Total Sub Head-2:- 0.0 0.0 0.0 0.0 0.0 423464.17 0.0 0.0 Sub Head - 3 Sanitary Installation 0.0 0.0 0.0 0.0 0.0 |
| 280 | 30.5 b |
| 281 | 30.11 |
| 282 | 30.8 (b) |
| 283 | 30.64 C |
| 284 | 30.16 |
| 285 | 30.21B (ii) |
| 286 | 30.32 |
| 287 | (vii) |
| 288 | 30.47 |
| 289 | 30.43 (i) |
| 290 | 30.58(a) |
| 291 | 30.65 (A) |
| 292 | 30.53-30.33 |
| 293 | 30.71B |
| 294 | 30.66 |
| 295 | 30.72d |
| 296 | 30.64 (A) |
| 297 | 30.64 (B)(i) |
| 298 | 30.61(a) |
| 299 | 30.56 Cvi |
| 300 | 30.69 0.0 Note:-To be provided only for VIP Installations and with prior approval of the Engineer-in-charge. 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 |
| 301 | 30.69 B |
| 302 | 30.63 a |
| 303 | 30.97Ai |
| 304 | 30.96A |
| 305 | Analy |
| 306 | Analy |
| 307 | 30.101i |
| 308 | Analy |
| 309 | Analy 0.0 Total Sub Head-3:- 0.0 0.0 0.0 0.0 0.0 2753694.97 0.0 0.0 Sub Head-4 Flooring and Wall Tile 0.0 0.0 0.0 0.0 0.0 |
| 310 | 14.11 |
| 311 | Note iv Ch-14 |
| 312 | Note iv Ch-14 |
| 313 | 14.122 |
| 314 | Note iv Ch-14 |
| 315 | Note iv Ch-14 |
| 316 | 30.82 |
| 317 | 14.128 |
| 318 | Note iv Ch-14 |
| 319 | Note iv Ch-14 |
| 320 | 14.88 |
| 321 | Note iv Ch-14 |
| 322 | Note iv Ch-14 |
| 323 | 14.75 |
| 324 | 14.7 0.0 Total Sub Head-4:- 0.0 0.0 0.0 0.0 0.0 1679041.54 0.0 0.0 Sub Head -5 Drinking Water Coller 0.0 0.0 0.0 0.0 0.0 |
| 325 | 30.25 |
| 326 | 30.28 |
| 327 | 34.26A |
| 328 | i 0.0 Total Sub Head-5:- 0.0 0.0 0.0 0.0 0.0 419987.02 0.0 0.0 Sub Work-2 0.0 0.0 0.0 0.0 0.0 0.0 Providing UGSR 100000 ltr including pump house 0.0 0.0 0.0 0.0 0.0 |
| 329 | 10.10 b ii |
| 330 | 10.17 |
| 331 | 10.22 |
| 332 | Note-ii of Ch.-9 |
| 333 | 18.18 |
| 334 | 18.35 |
| 335 | 11.29 (a) |
| 336 | 15.10 |
| 337 | 18.24 |
| 338 | 18.38 |
| 339 | 18.26 |
| 340 | 18.27 |
| 341 | 18.25 (b) |
| 342 | 17.27 (a) (iv) |
| 343 | 17.23 (ii) |
| 344 | 17.49 (a) |
| 345 | 16.20 |
| 346 | 16.15 |
| 347 | 16.16 |
| 348 | 16.17 |
| 349 | 16.60 |
| 350 | 29.34A a |
| 351 | 29.35 |
| 352 | 14.11 |
| 353 | 14.16 |
| 354 | 13.13i |
| 355 | 13.55 |
| 356 | 13.74a i |
| 357 | 13.75i |
| 358 | 13.76 |
| 359 | 13.45 |
| 360 | 13.51 |
| 361 | 30.76 (b) |
| 362 | N.S 0.0 Total Total Sub Head-5:- 0.0 0.0 0.0 0.0 0.0 2515254.16 0.0 0.0 Sub Work-2 0.0 0.0 0.0 0.0 0.0 0.0 Sub Head-2 Estate Water Supply 0.0 0.0 0.0 0.0 0.0 |
| 363 | 28.23 |
| 364 | 28.25 |
| 365 | 28.27A |
| 366 | 28.66 |
| 367 | 28.33 |
| 368 | 28.32 0.0 Total Sub Work-2 0.0 0.0 0.0 0.0 0.0 444848.95 0.0 0.0 Sub Work-3 0.0 0.0 0.0 0.0 0.0 0.0 Sub Head-3.1 0.0 0.0 0.0 0.0 0.0 0.0 Sub Head-1 Estate Sewerage 0.0 0.0 0.0 0.0 0.0 |
| 369 | 29.43 |
| 370 | 29.5bi |
| 371 | B(a) |
| 372 | 28.48 |
| 373 | Analy |
| 374 | 10.10 b ii |
| 375 | 10.13 ii |
| 376 | 15.8 0.0 0.0 0.0 0.0 0.0 0.0 0.0 70.61 sqm 0.0 0.0 201.92 0.05 212.72 Rupees Two Hundred Twelve And Seventy Two Paise Only 15020.16 0.0 |
| 377 | 15.48 0.0 0.0 0.0 0.0 0.0 0.0 0.0 70.61 sqm 0.0 0.0 59.0 0.05 62.16 Rupees Sixty Two And Sixteen Paise Only 4389.12 0.0 |
| 378 | 10.15 |
| 379 | 18.18 |
| 380 | 29.35 |
| 381 | 29.34 Aa 0.0 Total Sub Head-3.1:- 0.0 0.0 0.0 0.0 0.0 762193.62 0.0 0.0 Sub Work-4 0.0 0.0 0.0 0.0 0.0 0.0 Roof Top Rain water Harvesting 0.0 0.0 0.0 0.0 0.0 |
| 382 | 28.13 |
| 383 | xxiii |
| 384 | A(a) |
| 385 | 28.48 |
| 386 | Analysis Attached |
| 387 | Analysis Attached |
| 388 | N.S. 0.0 Total Sub Work-4:- 0.0 0.0 0.0 0.0 0.0 1238559.39 0.0 0.0 Sub Work-5 0.0 0.0 0.0 0.0 0.0 0.0 Fire Fighting Arrangements as per NBC Code 0.0 0.0 0.0 0.0 0.0 |
| 389 | 28.125c |
| 390 | 28.124c |
| 391 | 28.126 |
| 392 | 28.107 |
| 393 | 28.128 |
| 394 | 28.43 |
| 395 | 28.31A |
| 396 | 28.112 |
| 397 | 28.108 |
| 398 | 28.11 |
| 399 | 28.113 |
| 400 | 28.114 |
| 401 | 28.115 |
| 402 | 28.116 |
| 403 | 28.117 |
| 404 | 28.118 |
| 405 | 28.120 |
| 406 | 28.121 |
| 407 | 28.122 |
| 408 | 28.123 |
| 409 | 28.129 |
| 410 | 28.127 |
| 411 | 28.105 |
| 412 | 34.10 A |
| 413 | 30.97Ai |
| 414 | 30.96A |
| 415 | 30.98 |
| 416 | Analy |
| 417 | Quot Analy |
| 418 | Quot Analy |
| 419 | Quot Analy |
| 420 | Quot Analy |
| 421 | Quot Analy 0.0 Total Sub Work-5:- 0.0 0.0 0.0 0.0 0.0 4598621.38 0.0 0.0 Providing & Installation of VRV/VRF Air Conditioning System 0.0 EQUIPMENT |
| 422 | 0.0 0.0 Outdoor Units 0.0 VRV/VRF Outdoor Unit 0.0 Supply, Installation, Gas Charging, Testing and Commisioning of Air Cooled VRV/VRF units with rotary/scroll Compressor capable of modulating capacity from Min 20%- 100%or more working on R410A/or as per OEM design with heating & cooling both. The prices should include all works such as lifting, shifting and positioning of outdoor units. The unit shall be factory charged & any top-up gas/oil required for first charge including nitrogen leak testing, oil charging, vaccumisation shall be in scope of agency. The outdoor unit shall be a factory assembled unit housed in a sturdy weather proof casing constructed form rust-proofed mild steel panels coated with powder coated finish 0.0 The Module shall have multiple scroll compressors and be able to operate even in case of breakdown of one of compressor.. Each circuit of Module units shall have Multiple compressors for better redundancy incase of breakdown. 0.0 The heat exchanger for Outdoor shall be constructed with copper tubes mechanically bonded to aluminium fins to form a cross fin coil. The Condenser fins must be coated with Anti-corrosive treatment.The following safety devices shall be part of the outdoor unit:- High Pressure Switch, Low Pressure Switch, Fan Motor Safety Thermostat, Over Current Relay, Fusible Plugs, Fuses. Each unit shall be equipped, with an oil separator to ensure stable operation with long refrigerant piping. The outdoor units shall have a minimum COP of 3.1 at 100% loading and ISEER of 6.5 at ARI conditions (To crosscheck COP orginal data sheet to be provided from OEM ), the ODU shall have condenser fan capable of minmum 7 speeds or better technology for saving energy at various loading conditions. 0.0 The out door units shall be suitable for 3 phase 4 wire system, 415V + 10 %, 50 Hz AC supply and indoor shall be suitable for Single phase 220-240V, 50 Hz AC supply. 0.0 All compressor shall have inverter technology i.e. outdoor units shall have all inverter based compressor and all outdoor units shall work even at 52°C ambient temperature without tripping 0.0 The manufacturer of ODU and compressor shall be of the same make . i.e the make of compressor shall be identical of the ODU. Contractor to include all necessary charge of refrigerant & connecting kits for AHU & Y joints as per there design 0.0 PCB Casing should be IP 55 protected and Universal PCB shall be used in all ODUs 0.0 Contractor to include all necessary charge of refrigerant & connecting kits for AHU & Y joints as per there design 0.0 Insurance of Units ,Unloading at site, placement of Oudoor Units on the foundation,stands, co-ordination during execution, rendering necessary guidance for execution, supervision, testing, commissioning and startup of above mentioned VRF/VRV by OEM. 0.0 Note: The civil foundations reqd shall be made by the tenderer i 0.0 22 HP ( Multiple Compressor) 5.0 Each 517136.0 Rupees Five Lakh Seventeen Thousand One Hundred Thirty Six Only 2585680.0 0.0 ii 0.0 26 HP ( Multiple Compressor) 2.0 Each 674644.0 Rupees Six Lakh Seventy Four Thousand Six Hundred Forty Four Only 1349288.0 0.0 iii 0.0 28HP ( Multiple Compressor) 2.0 Each 699594.0 Rupees Six Lakh Ninety Nine Thousand Five Hundred Ninety Four Only 1399188.0 0.0 iv 0.0 34HP ( Multiple Compressor) 1.0 Each 802572.0 Rupees Eight Lakh Two Thousand Five Hundred Seventy Two Only 802572.0 0.0 0.0 Make :Daikin, Mtistibushi Electric, Toshiba,O General,Carrier,Blue Star |
| 423 | 0.0 0.0 Supply, installation, testing and commissioning of below mentioned capacity Casstte/ Ductable type Indoor air conditioners complete with fan and fan motor, inter connecting it with refrigerant piping, insulation , cabling, earthing, necessary galvanized steel supports, Double layer TF Canvass Connection(for Ductables) etc. as per specification and drawing. 0.0 The cooling coil shall be made of seamless copper tube. The tube shall be hydraulically or mechanically expanded and tested for 21 Kg/cm2. Indoor units shall have a wired remote control. They shall be operated through from the wired/Wireless remote control from the respective locations. 0.0 Along with Drain pump as a standard accessory and shall be included in the price of units |
| 424 | 0.0 i 0.0 1.3 TR Cassette AC 1.0 Each 41979.0 Rupees Forty One Thousand Nine Hundred Seventy Nine Only 41979.0 0.0 ii 0.0 1.6 TR Cassette AC 5.0 Each 43213.0 Rupees Forty Three Thousand Two Hundred Thirteen Only 216065.0 0.0 iii 0.0 2.0 TR Cassette AC 6.0 Each 45683.0 Rupees Forty Five Thousand Six Hundred Eighty Three Only 274098.0 0.0 iv 0.0 2.3 TR Cassette AC 1.0 Each 48152.0 Rupees Forty Eight Thousand One Hundred Fifty Two Only 48152.0 0.0 v 0.0 2.8 TR Cassette AC 2.0 Each 50621.0 Rupees Fifty Thousand Six Hundred Twenty One Only 101242.0 0.0 vi 0.0 3.2 TR Cassette AC 9.0 Each 55560.0 Rupees Fifty Five Thousand Five Hundred Sixty Only 500040.0 0.0 |
| 425 | 0.0 i 0.0 1.8 TR Cassette AC 2.0 Each 61733.0 Rupees Sixty One Thousand Seven Hundred Thirty Three Only 123466.0 0.0 |
| 426 | 0.0 i 0.0 2.0 TR 4.0 Each 61733.0 Rupees Sixty One Thousand Seven Hundred Thirty Three Only 246932.0 0.0 |
| 427 | 0.0 i 0.0 1.3 TR 12.0 Each 35188.0 Rupees Thirty Five Thousand One Hundred Eighty Eight Only 422256.0 0.0 ii 0.0 2.0 TR 2.0 Each 35805.0 Rupees Thirty Five Thousand Eight Hundred Five Only 71610.0 0.0 iii 0.0 2.3 TR 2.0 Each 43830.0 Rupees Forty Three Thousand Eight Hundred Thirty Only 87660.0 0.0 |
| 428 | 0.0 i 0.0 1.3 TR Mid Static 4.0 Each 29632.0 Rupees Twenty Nine Thousand Six Hundred Thirty Two Only 118528.0 0.0 ii 0.0 1.6 TR Mid Static 1.0 Each 30867.0 Rupees Thirty Thousand Eight Hundred Sixty Seven Only 30867.0 0.0 iii 0.0 2.0 TR Mid Static 3.0 Each 32101.0 Rupees Thirty Two Thousand One Hundred One Only 96303.0 0.0 iv 0.0 2.5 TR Mid Static 2.0 Each 39509.0 Rupees Thirty Nine Thousand Five Hundred Nine Only 79018.0 0.0 v 0.0 3.2 TR Mid Static/HiStatic 4.0 Each 41979.0 Rupees Forty One Thousand Nine Hundred Seventy Nine Only 167916.0 0.0 vi 0.0 4.5 TR High Static 1.0 Each 43213.0 Rupees Forty Three Thousand Two Hundred Thirteen Only 43213.0 0.0 vii 0.0 5.7 TR High Static 1.0 Each 98773.0 Rupees Ninety Eight Thousand Seven Hundred Seventy Three Only 98773.0 0.0 viii 0.0 7.0 TR High Static 2.0 Each 104946.0 Rupees One Four Thousand Nine Hundred Forty Six Only 209892.0 0.0 0.0 Make :Daikin, Mtistibushi Electric, Toshiba,O General,Carrier,Blue Star |
| 429 | 0.0 0.0 SITC of following minimum capacity VRV/VRF Treated Fresh Air Type Indoor ceilingmounted unit equipped with synthetic washable media pre-filter, fan section with lownoise fan/dynamically balanced blower, multispeed motor, coil section with DXcopper coil, electronic expansion valve ,outer cabinet, drain pump grill, necessarysupports, vibration isolation, Cordless remote control etc suitable for operation on 230 V+- 10% 50 Hz AC supply i 0.0 Min 1000 CFM 6.4 TR 1.0 Each 120997.0 Rupees One Twenty Thousand Nine Hundred Ninety Seven Only 120997.0 0.0 ii 0.0 Min 1650 CFM 7.0 TR 1.0 Each 129639.0 Rupees One Twenty Nine Thousand Six Hundred Thirty Nine Only 129639.0 0.0 iii 0.0 Min 1750 CFM 8.0 TR 1.0 Each 135813.0 Rupees One Thirty Five Thousand Eight Hundred Thirteen Only 135813.0 0.0 |
| 430 | 0.0 i 0.0 Supply Installation, Testing and commissioning of fittings Ref Net / T / Y-joints etc as per specifications. 59.0 Set 4630.0 Rupees Four Thousand Six Hundred Thirty Only 273170.0 0.0 0.0 Make :Daikin, Mtistibushi Electric, Toshiba,O General,Carrier,Blue Star |
| 431 | 0.0 i 0.0 Providing, Fixing & Running Touch Screen Centralized Controller for all VRV/VRF / Indoor /Outdoor Units . The controller can operate minimum 64 indoor units 1.0 Each 257221.0 Rupees Two Lakh Fifty Seven Thousand Two Hundred Twenty One Only 257221.0 0.0 0.0 Make :Daikin, Mtistibushi Electric, Toshiba,O General,Carrier,Blue Star |
| 432 | 0.0 0.0 Supply and Installation of Interconnecting Refrigerant Piping of various sizes as required for the full functionality of the VRF/VRV system etc. complete in all respects duly insulated with Class O closed cell nitrile rubber as per specifications of the manufacturer. the contractor shall submit a detailed drawing approved by the manufacturer showing the piping sizes & layout to be followed at the site with the tender document. the contractor shall also get the drawings showing outdoor units in connection with indoor units approved from the HVAC consultant/Client in original from and then the head office of the manufacturer with a certificate stating that the piping layout is as per company specifications for full functioning of the system.(Make : Rajco,Mandev,Totaline,) i 0.0 41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation 40.0 Meter 3283.0 Rupees Three Thousand Two Hundred Eighty Three Only 131320.0 0.0 ii 0.0 38.1 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation 30.0 Meter 2669.0 Rupees Two Thousand Six Hundred Sixty Nine Only 80070.0 0.0 iii 0.0 34.9 mm OD (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation 80.0 Meter 2433.0 Rupees Two Thousand Four Hundred Thirty Three Only 194640.0 0.0 iv 0.0 31.8 mm OD (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation 30.0 Meter 2211.0 Rupees Two Thousand Two Hundred Eleven Only 66330.0 0.0 v 0.0 28.6 mm OD (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation 60.0 Meter 1754.0 Rupees One Thousand Seven Hundred Fifty Four Only 105240.0 0.0 vi 0.0 25.4 mm OD (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation 35.0 Meter 1532.0 Rupees One Thousand Five Hundred Thirty Two Only 53620.0 0.0 vii 0.0 22.2 mm OD (ins(Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation 60.0 Meter 1073.0 Rupees One Thousand Seventy Three Only 64380.0 0.0 viii 0.0 19.1 mm OD (Hard drawn) with tube thickness 1.2 mm with 13 mm thick insulation 130.0 Meter 919.0 Rupees Nine Hundred Nineteen Only 119470.0 0.0 ix 0.0 15.9 mm OD (Soft drawn) with tube thickness 1.2 mm with 13 mm thick insulation 550.0 Meter 760.0 Rupees Seven Hundred Sixty Only 418000.0 0.0 x 0.0 12.7 mm OD(Soft drawn) with tube thickness 1.2 mm with 13 mm thick insulation 340.0 Meter 501.0 Rupees Five Hundred One Only 170340.0 0.0 xi 0.0 9.5 mm OD ((Soft drawn) with tube thickness 1.2 mm with 13 mm thick insulation 530.0 Meter 376.0 Rupees Three Hundred Seventy Six Only 199280.0 0.0 xii 0.0 6.4 mm OD (Soft drawn) with tube thickness 1.2 mm with 13 mm thick insulation 320.0 Meter 312.0 Rupees Three Hundred Twelve Only 99840.0 0.0 0.0 Insulation Make : K Flex ,Armacell |
| 433 | 0.0 0.0 Supply Installation Testing Commissioning of Next Generation of Weather proof (outdoor Type) Floor Mounted AHU AHRI Certified with Thermal Break Profile , 48+-2 mm thick panels consisting of pre plasticized G.I casing made of thickness 0.8 mm outside layer and GI sheet of thickness 0.8mm inside layer with polyurethene foam (PUF) CFC Free insulation of density 40+-2 kg/m3 factory injected between them by injection moulding machine, complete with blower section with blower DIDW/Suitable backward curve. The unit shall be provided with stainless steel drain pan made out of 18G SS 304 sheet duly insulated with 13mm closed cell nitrile rubber insulation.The unit shall be equiped with TEFC drive motor(Suitable for VFD) of Efficiency Class IE 3 fan with blower suitable for operation on 415 volts + 10%, 50 Hz, AC supply, 6 Row Deep cooling coil of 0.13 mm Aluminum fins and Copper tube of 1/2\\" copper tube of 0.6 mm thickness,Fresh Air Cut out,Mixing Box and Filter section with 50 mm thick box type pre filterme complete with expansion valve,sensors,wired remote controller & PCB, Light etc. to run the AHU as required as per following specifications 0.0 Note : AHU Must Suitable for VRV/VRF Outdoor Units and The AHU Unit shall be controlled by Central Controlled Unit 0.0 CFM TYPE SP CC /TR i 0.0 8000 FM 80 6 RD /22 2.0 Each 342824.0 Rupees Three Lakh Forty Two Thousand Eight Hundred Twenty Four Only 685648.0 0.0 |
| 434 | 0.0 i 0.0 SITC of Required AHU Expansion KIT for connection the cooling coils with the VRF/VRV outdoor unit complete with expansion valve,sensors,wired remote controller & PCB etc. to run the AHU as required for OT AHU's 2.0 SET 51444.0 Rupees Fifty One Thousand Four Hundred Forty Four Only 102888.0 0.0 |
| 435 | 0.0 0.0 Supply, Installation, Testing and Commissioning of Acoustic lining inside ducts/plenum using open cell nitrile rubber foam having microban anti-microbial/ anti fungal product protection and of 160-180 kg / m³ density as per ASTM D3575, class 1 ratingn As per BS476,PART-7, cut to required sizes and to be stuck to the inside of duct surfaces with adhesive as approved by the manufacturer. (Rubber based solvent). as per specifications i 0.0 15mm thick sound board for Floor Mounted AHU's 40.0 Sqmt 1139.0 Rupees One Thousand One Hundred Thirty Nine Only 45560.0 0.0 ii 0.0 10mm thick sound board for Ceiling Suspended AHU/Ductable Acs 130.0 Sqmt 759.0 Rupees Seven Hundred Fifty Nine Only 98670.0 0.0 |
| 436 | 0.0 0.0 SITC of Physically / Chemically crosslinked polyethylene foam, with factory reinforced alupet foil facing, ANTI MICROBIAL/ANTI FUNGAL,HFC & CFC free , Negligible VOC level with Class O fire properties,with very low fire propagation of < 5.5 and passing E-84 at < 25/50, as per technical specification, the density of the foam should be not less than 25-30kg/m3 and the maximum thermal conductivity K should be 0.032W/mK@ 23 Deg C , the permeability resistance factor u shouldn't be less than 14000. The product shall have temperature range of –20oC to 115oC i 0.0 13 mm thick 700.0 Sqmt 591.0 Rupees Five Hundred Ninety One Only 413700.0 0.0 |
| 437 | 0.0 0.0 Physically / Chemically crosslinked polyethylene foam, with factory laminated heavy duty and ultra tough multi-layered composite aluminium foil facing, with puncture resistance of >400N and Class O fire properties as per BS 476 Part BS 476 Part 6 & 7 and as per the tender technical specification and density of the foam should be not less than 25 - 30 kg/m3 and maximum thermal thermal conductivity K should be 0.032W/mK@ 23 Deg C & the permeability resistance factor u shouldn't be less than 97000. i 0.0 25mm thick 40.0 Sqmt 1286.0 Rupees One Thousand Two Hundred Eighty Six Only 51440.0 0.0 0.0 Make :K Flex,Armacell,Aerolam |
| 438 | 0.0 0.0 Providing and fixing and in position the following PVC pipes for condensate drain duly insulated with 6mm Nitrile Insulation & vapour barrier duly secured with adhesive tape as per specification ,cut to required length and installed with all joints , including the necessary fittings. (For all the indoor units upto the main header in the shaft dor vertical risers i 0.0 40 mm dia 80.0 Meter 188.0 Rupees One Hundred Eighty Eight Only 15040.0 0.0 ii 0.0 32 mm dia 200.0 Meter 123.0 Rupees One Hundred Twenty Three Only 24600.0 0.0 iii 0.0 25 mm dia 350.0 Meter 78.0 Rupees Seventy Eight Only 27300.0 0.0 0.0 Astral,Diplast,Supreme,Prince |
| 439 | 0.0 0.0 Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting as per IS 655:2006 complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications.GI Sheet Should be 120GSM with RoHS complaintand TDF flange should be of 35 mm only of following sheet thickness complete as required and shall also confirm to the BIS specifications.The duct shall be fabricated at site for to make Collors/bends/plenums/suit pieces Only i 0.0 1.0 mm (20 gauge) GSS 40.0 Sq.mtr 1445.0 Rupees One Thousand Four Hundred Forty Five Only 57800.0 0.0 ii 0.0 0.8mm (22 gauge) GSS 200.0 Sq.mtr 1208.0 Rupees One Thousand Two Hundred Eight Only 241600.0 0.0 iii 0.0 0.63mm (24 gauge) GSS 500.0 Sq.mtr 1031.0 Rupees One Thousand Thirty One Only 515500.0 0.0 0.0 Sheet Make : Ductofab, Rolastar,ADS,zeco ( Sheet Make Sail /Tata ) |
| 440 | 0.0 0.0 Providing and fixing of Extruded aluminium supply and return air grilles/diffusers/ louvres with dampers,etc. duly powder coated as per specifications and drawings. |
| 441 | 0.0 0.0 Make : Sant,Pinaire,Caryaire,Systemair |
| 442 | 0.0 0.0 Make : Sant,Pinaire,Caryaire,Systemair |
| 443 | 0.0 0.0 Main Electrical Panel (CPRI Approved min. 70K) for VRV/VRF System 2.0 Each 356372.0 Rupees Three Lakh Fifty Six Thousand Three Hundred Seventy Two Only 712744.0 0.0 0.0 Design ,Supply,Installation,Testing and Commissioning Electrical Main Panel weather Proof outdoor Type Powder Coated Made out of TATA/SAIL/ESSAR/JINDAL/Reputed make sheet having thickness 2.0 mm for load bearing surfaces & 1.6 mm Non bearing surfaces duly processsed powder coated having Siemens grey colour or as approved by client or department (Outdoor Type with weatherproof canopy design)as per following specifications complete in all respect . Note : Manufacturer should have atleat CPRI Approval of 70 K 0.0 INCOMING SUPPLY 250-400Amps ,3Pole MCCB,50 KA with Microprocessor release.The MCCB shall be double break & the ICS=100% ICU = 1nos Make : Schneider/ Siemens/ABBSpreader Link with phase Barriers = 4sets Make : Schneider/ Siemens/ABB Rotary Mechanism = 1nos Make : Schneider/ Siemens/ABBAuto Phase Sequence SectionATS Suitable Amps for Auto Phase sequence with SPP alongwith On delay and required equipment Make of ATS : Socomec/HPL/Schnieder/L&T and allied material such as relay etc of Reputed MakeMetering SectionLoad Manager EM6400NG with RS485 Port or Equivalent (Class 1.0, with RS485 Port, with Paramenters V, Amp, PF, % THD, F,W,WH,VA,VAH, VAR,VARH, Runhrs, ON hrs, Interupts = 1No.Make : Schneider / Secure / Siemens/ABB/Elmeasure/SelecControl MCB SP C Curve= 3nos Make : Schneider/ Siemens/ABB 0.0 CT's 400/5 or suitable= 3nos Make: AE/Essma/Newtek/SelecIndication Lamps LED Type RYB = 3nos Make : ABB/ Schneider/ Siemens/ESSEN/L&T/Reputed Outgoing Feeder for VRV/VRF Units - 7 nos 0-100 Amps or suitable to ODU's Pole MCCB,36 KA with Thermal magenetic release adjustable type.The MCCB shall be double break & the ICS=100% ICU = 7 nos Make : Schneider/ Siemens/ABBSpreader Link with phase Barriers = sets Make : Schneider/Siemens/ABB Rotary Mechanism = As Per requirment Make : Schneider/ Siemens/ABBMulti function Meter EM 64xx 1.0 RS or equavalent for EMS/BMS compatibilty Make : Schneider / Secure / Siemens/ABB/Elmeasure/Selec 0.0 INDICATING LAMPS LED Type Make : ABB/ Schneider/ Siemens/L&T/Reputed 0.0 Control MCB SP C Curve for control Make : Schneider/ Siemens/ABBCT's 60/5 Make: Essma/Newtek/Selec/SecureMCB TPN plus ELCB of the same rating ( 300 MA or suitable) as outgoings as per the combination of machine (Example, if in section of 26 HP VRV a Set of 1 nos 26 HP VRV each is taken then MCB TPN & ELCB 63 Amps 300MA or suitable each to be provided as O/G or in case of 12HP VRV & 14 HP combination nos MCB TPN 24 Amps & ELCB of 32 Amps and 32 Amps TPN & ELCB 40 Amps/ 300MA each to be provided for the combination or in any other combination the MCB TPN & ELCB to be provided as per requirment) Make of MCB/ELCB : Schneider/ Siemens/ABBPanelFabrication of Powder Coated Enclosure made out of TATA/SAIL/ESSAAR/JINDAL/Reputed make CRCA sheet having 2 mm for load bearing surfaces & 1.6 mm for non load bearing surfaces ,duly processsed powder coated having Siemens grey colour. (Outdoor Type with weatherproof canopy design)Assembly charges of Aluminium Bus Bar 600A TPN Electrolite grade E91 having suitable cross section for Phase & Neutral and Current carring capacity 1 A/Sq. mm2. inclusive of Insulators, colour coded Heat shrinkable Insulation sleeve (RYBN)Assembly of Hardware (PVC Channels/MCB Channels/Fibre-Glass/Gaskits/nuts/Bolts/washers/ Terminal blocks, etc)Complete Wiring inclusive of control wiring, power wiring, Aluminium Solid connections/interconnections including insulators, thimbles,etc 0.0 Unloading at site, placement of Panel on the foundation, co-ordination during execution, rendering necessary guidance for execution, supervision, testing, commissioning and startup of above mentioned Panel.Panel Make : Adlec/Siemens/Tricolite/Unitech Power System/Vrindavan Electricals/International Switch Gears Pvt. Ltd |
| 444 | 0.0 0.0 SITC of AHU panels duly powder coated wall mounted Made out of TATA/SAIL/ESSAR/JINDAL/Reputed make CRCA Sheet of 1.6 mm thick consisting of Upto incomer as MPCB/MCCB suitable as per AHU 0.0 ON/OFF/TRIP indication light LED type, DIGITAL Ammeter with ASS; CT's 30/5; contactors up to32A or Suitable (with 2 NO+ 2NC); Start/Stop push buttons with auto & Manual control switch, Single Phase Preventer, MCB DP upto 10 Amps C Curve ,Over load Relay 16-25A or Equivalent Suitable , power & control terminals; neutral link and internal wiring & connections for AHU motors upto 5 HP or Suitable 2.0 Each 356372.0 Rupees Three Lakh Fifty Six Thousand Three Hundred Seventy Two Only 712744.0 0.0 0.0 Panel Make : Adlec/Siemens/Tricolite/Unitech Power System/Vrindavan Electricals/International Switch Gears Pvt. Ltd 0.0 |
| 445 | 0.0 0.0 (Make: Havells/Ecko/Finolex/Polycab/L&T/KEI) |
| 446 | 0.0 0.0 Providing & Fixing Underdeck Insulation with 50 mm thick TF Quality EPS of Density 20 Kg/M3 fixed to slab with good quality Black CPRX Compound. 28Gwirenet shall be tightened arround insulation so as avoid any kind of sagging, Ends of net shall be overlapping at least 25mm. Overlaps shall be screwed with galvanized screws to avoid rusting : Make: Beardsell,Llyod 350.0 Sq.mtr 447.0 Rupees Four Hundred Forty Seven Only 156450.0 0.0 |
| 447 | 0.0 0.0 Supply, Installation testing & Commissioning of SINGLE Speed AXIAL Flow FAN (Make :Kruger, Systemair ,Flaktwood,LTI )complete with totally enclosed fan cooled motor direct driven, and fan shaft, motor mount, bird screen ,Isolators as per the specifications. Fan motor shall be suitable for 415 + 10% volts, 50 cycles, 3 phase power supply. Fans for high temperature ( except for fresh air) ratings shall be capable to work at 300 Deg C for at least 2 hours. The Axial fans shall be supplied with power panel. 0.0 Casing shall be hot dip galvanized to protect against corrosion. Length of the casing shall be greater than the length of fan & motor assembly. IMPELLER of axial fans shall be constructed from die cast aluminum. Profiles of impeller blade should be of aerofoil type to have high efficiency and low noise levels. Impeller must be statically and dynamically balanced as per ISO 1940 grade 6.3. Fan shall be selected based on best efficiency points with fan pitch angle selected in the middle range out of available whole range of fan pitch angle to allow possible fan speed adjustment on site. 0.0 Fire Mode i 0.0 High temperature fans suitable for 10400 CFM x 20mm static 2.0 Each 83975.0 Rupees Eighty Three Thousand Nine Hundred Seventy Five Only 167950.0 0.0 |
| 448 | 0.0 0.0 ( BMS Compatible) 0.0 SITC of Star delta starter/DOL panel with 01 No. - 0-40 A TP MCB with Conforming to BIS DOL/Star Delta starter, overload relay, ammeter (0-63A), single phase preventer. on off push button, on/off/trip indicators with protection fuse, manual reset overload relays, armoured cabling with proper tray supports from starter panel to fan motor Starter panel should be provided with auto manual toggle switch & facility to operate on remote signal. Necessary earthing, smoke & fire detector providing signal to starter panel, related control cabling shall be part of starter panel as approved by consultants & clients. i 0.0 Controls & interlocking accessories as Complete with Connection / interconnection required for above switchgears complete in all respect to run/Start the Motor Fan in case of Fire 2.0 Each 37554.0 Rupees Thirty Seven Thousand Five Hundred Fifty Four Only 75108.0 0.0 |
| 449 | 0.0 0.0 Supply, installation, testing & commisioning of Copper conductor , PVC insulated, PVC sheathed armoured/Unarmoured cable of 1.1 KV grade (Which is Interconnecting wiring for the fire alarm system with the AHU and the smoke dampers and AHU to BMS i 0.0 4C x 04 Sqmm Armoured 80.0 Mtr 550.0 Rupees Five Hundred Fifty Only 44000.0 0.0 ii 0.0 4C x 2.5 Sqmm Un-armoured 500.0 Mtr 195.0 Rupees One Hundred Ninety Five Only 97500.0 0.0 iii 0.0 4C x 1.5 Sqmm Un-armoured 250.0 Mtr 120.0 Rupees One Hundred Twenty Only 30000.0 0.0 0.0 Make : Havell's,Eko,Finolex,Polycab |
| 450 | 0.0 i 0.0 50 mm x 100 mm x 50mm x 1.6mm. Thickness 100.0 Mtr 400.0 Rupees Four Hundred Only 40000.0 0.0 ii 0.0 50 mm x 150 mm x 50mm x 1.6mm. Thickness 400.0 Mtr 495.0 Rupees Four Hundred Ninety Five Only 198000.0 0.0 iii 0.0 50 mm x 225 mm x 50mm x 1.6mm. Thickness 20.0 Mtr 639.0 Rupees Six Hundred Thirty Nine Only 12780.0 0.0 iv 0.0 50 mm x 300 mm x 50mm x 1.6mm. Thickness 250.0 Mtr 782.0 Rupees Seven Hundred Eighty Two Only 195500.0 0.0 v 0.0 50 mm x 450 mm x 50mm x 2.0mm. Thickness 30.0 Mtr 1323.0 Rupees One Thousand Three Hundred Twenty Three Only 39690.0 0.0 0.0 Total of Part B (In Rupees) XLPE INSULATED ARMOURED CABLES (LOOSE),COPPER EARTHING ,COPPER EARTHING STRIP etc. |
| 451 | 34.1 0.0 Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- xxix) Overall size 185sq.mm (3½ Core) Armoured (Loose) 100.0 mtr 895.48 Rupees Eight Hundred Ninety Five And Forty Eight Paise Only 89548.0 0.0 (xxxv) Overall size 6sq.mm (4Core) Armoured (Loose) 80.0 mtr 119.84 Rupees One Hundred Nineteen And Eighty Four Paise Only 9587.2 0.0 (xxxvi) Overall size 10sq.mm (4Core) Armoured (Loose) 150.0 mtr 146.17 Rupees One Hundred Forty Six And Seventeen Paise Only 21925.5 0.0 (xxxvii) Overall size 16sq.mm (4Core) Armoured (Loose) 80.0 mtr 161.98 Rupees One Hundred Sixty One And Ninety Eight Paise Only 12958.4 0.0 (xxxix) Overall size 35sq.mm (4Core) Armoured (Loose) 80.0 mtr 256.79 Rupees Two Hundred Fifty Six And Seventy Nine Paise Only 20543.2 0.0 |
| 452 | 34.14 0.0 Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 4.50 metre (14.76 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 8metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 3metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:- d) Earthing with 25mm x 5mm Copper Tape (upto 8Metre in Length) 1.0 each 17965.76 Rupees Seventeen Thousand Nine Hundred Sixty Five And Seventy Six Paise Only 17965.76 0.0 |
| 453 | 34.14 v) Fixing additional Length of earthing with Copper Tape (On Surface/Flushed) with petty material as required etc.:- d) Additional Length 25mm x 5mm thick Copper Tape 160.0 mtr 1039.8 Rupees One Thousand Thirty Nine And Eighty Paise Only 166368.0 0.0 0.0 Total of PART A 17677725.06 0.0 Total Sub Head 1+2+3+4+5+6:-- 33235125.13 0.0 ELECTRICAL SERVICES D1 0.0 Providing Internal Electrical Installations: 0.0 0.0 0.0 0.0 0.0 0.0 POINT WIRING: 0.0 0.0 0.0 0.0 0.0 |
| 454 | 34.02 |
| 455 | 34.01X |
| 456 | 33.15 |
| 457 | (xxvi) |
| 458 | (xxviii) 0.0 LED'S FIXTURES & FANS: 0.0 0.0 0.0 0.0 |
| 459 | NSR 0.0 OCCUPANCY SENSORS: 0.0 0.0 0.0 0.0 |
| 460 | NSR 0.0 SUSPENSION RODS FOR CEILING FANS: 0.0 0.0 0.0 0.0 |
| 461 | 34.11 |
| 462 | xi 0.0 CONDUIT PIPE & COPPER WIRES: 0.0 0.0 0.0 0.0 |
| 463 | 34.12 |
| 464 | 34.09 |
| 465 | viii 0.0 SUB DISTRIBUTION SYSTEM: 0.0 0.0 0.0 0.0 |
| 466 | 34.17 |
| 467 | 34.17xvii |
| 468 | 34.16 A |
| 469 | xvi 0.0 MAIN DISTRIBUTION SYSTEM: 0.0 0.0 0.0 0.0 0.0 MAIN VERTICAL DISTRIBUTION BOARD (EMERGENCY): TPN 4Way to feed MCB DB's (EMERGENCY LOAD) ON GROUND FLOOR 0.0 0.0 0.0 0.0 |
| 470 | 34.17xvi |
| 471 | 34.23C |
| 472 | 34.16 A |
| 473 | xii 0.0 RISING MAIN: (IN ELECTRICAL ROOM) 0.0 0.0 0.0 0.0 |
| 474 | 34.23C |
| 475 | 34.12xvv |
| 476 | 34.12xxvi |
| 477 | d 0.0 INDOOR LT PANELS: 0.0 0.0 0.0 0.0 0.0 EARTHING SYSTEM (INDOOR): 0.0 0.0 0.0 0.0 |
| 478 | 34.14i |
| 479 | 34.14vi |
| 480 | b 0.0 Total D1: 5086407.09 0.0 D2 0.0 Providing Advance Lightning Protection System: |
| 481 | N.S.R. |
| 482 | N.S.R. |
| 483 | N.S.R. |
| 484 | N.S.R. |
| 485 | N.S.R. |
| 486 | NSR Based on CSR |
| 487 | 34.09 |
| 488 | xi 0.0 Total D2: 335029.78 0.0 D3 0.0 Providing 2 Nos. 15 Passenger Lifts (1No. 4Stops & 1No. 3Stops): |
| 489 | NSR 0.0 Other Features: 1. Battery operated emergency light with rechargeable battery 2. Battery operated emergency alarm with rechargeable battery 3. Adjustable Guide shoes 4. Micro movement LED based buttons 5. Door Open and Close buttons 6. Emergency Intercom provided inside the elevator 7. Emergency Intercom usable without the voice communication 8. Load weighing device with overload bypass feature and Overload function with Audio Visual Indication 9. Steel items, door frames sill angle's, fascia plates, spring buffers10. Automatic phase reversal device and Phase Failure protection11. Call registration 12. Audio & Video System installted in the lift indicating arrival at a floor 13. Manual break lever 14. Additional car gate lock 15. Automatic break testing infrared safety curten 16. Braille Buttons (Inside and outside) with Braille instructions for the communication system 17. Kick plate/Skirting 18. Lift anoucement system to announce floor level's in english language only and indication of door for entrance / exit is either Open or Close 19. Car Operating Panel 20. Car plateform constructed out of cold rolled grain oreinted formed sheets of steel 21. Phase two device fire man drive 22. Fire Man switch at main lobby 23. Car false ceiling in stainless steel 24. Pit ladder 25. Anti Nuisance car call protection 26. Door Nudging 27. Automated Resuce Device to bring the elevator to the nearest landing in case of power failure.28. The provision of mirror on the wall of the lift car opposite the lift door not extend below 900mm from the lift floor to avoid confusing people with impaired sight.29. The emergency communication system should be coupled with an induction loop system installed all around the lift. Telephone units, where provided, should have an inbuilt inductive coupler to assist persons using hearing aids.30. The use of visually and acoustically reflective wall surfaces should be minimized with the lift car and usually reflections can cause discomfort and affect the visual ability of people with impairment.31.The Floor of the lift car should be slip resistant and having similar frictional qualities to the floor of the lift landing to decrease the risk of stumbling. 1.0 job 0.0 0.0 2474925.0 0.0 2474925.0 Rupees Twenty Four Lakh Seventy Four Thousand Nine Hundred Twenty Five Only 2474925.0 0.0 |
| 490 | NSR 0.0 Other Features: 1. Battery operated emergency light with rechargeable battery 2. Battery operated emergency alarm with rechargeable battery 3. Adjustable Guide shoes 4. Micro movement LED based buttons 5. Door Open and Close buttons 6. Emergency Intercom provided inside the elevator 7. Emergency Intercom usable without the voice communication 8. Load weighing device with overload bypass feature and Overload function with Audio Visual Indication 9. Steel items, door frames sill angle's, fascia plates, spring buffers10. Automatic phase reversal device and Phase Failure protection11. Call registration 12. Audio & Video System installted in the lift indicating arrival at a floor 13. Manual break lever 14. Additional car gate lock 15. Automatic break testing infrared safety curten 16. Braille Buttons (Inside and outside) with Braille instructions for the communication system 17. Kick plate/Skirting 18. Lift anoucement system to announce floor level's in english language only and indication of door for entrance / exit is either Open or Close 19. Car Operating Panel 20. Car plateform constructed out of cold rolled grain oreinted formed sheets of steel 21. Phase two device fire man drive 22. Fire Man switch at main lobby 23. Car false ceiling in stainless steel 24. Pit ladder 25. Anti Nuisance car call protection 26. Door Nudging 27. Automated Resuce Device to bring the elevator to the nearest landing in case of power failure.28. The provision of mirror on the wall of the lift car opposite the lift door not extend below 900mm from the lift floor to avoid confusing people with impaired sight.29. The emergency communication system should be coupled with an induction loop system installed all around the lift. Telephone units, where provided, should have an inbuilt inductive coupler to assist persons using hearing aids.30. The use of visually and acoustically reflective wall surfaces should be minimized with the lift car and usually reflections can cause discomfort and affect the visual ability of people with impairment.31.The Floor of the lift car should be slip resistant and having similar frictional qualities to the floor of the lift landing to decrease the risk of stumbling. 1.0 job 0.0 0.0 2385157.0 0.0 2385157.0 Rupees Twenty Three Lakh Eighty Five Thousand One Hundred Fifty Seven Only 2385157.0 0.0 |
| 491 | 34.10D |
| 492 | xxxvii |
| 493 | 34.10C |
| 494 | xxxvii |
| 495 | 34.37 A |
| 496 | 34.14(i) |
| 497 | 34.14vi (a) |
| 498 | 34.23 C |
| 499 | 34.23D |
| 500 | 34.17 |
| 501 | 34.17xvii |
| 502 | 34.16 A |
| 503 | vi 0.0 Total D3: 5033471.74 0.0 D4 0.0 Providing EPABX System: |
| 504 | 34.01 xi |
| 505 | b 34.09A COPPER CONDUCTOR CABLES FOR SPECIAL ELECTRICAL SERVICES: 0.0 0.0 0.0 0.0 34.09A(i) Supply and erection of CAT 6 with 23AWG solid bare copper conductor, special grade PE insulation with star separator, 4pair Unshielded Twisted Pair (UTP) industrial cable, FR PVC sheathed, Class-E, 250 MHz of bandwidth, supporting data transfer speeds of up to 10 Gbps (10GBASE-T) for distances up to approximately 180 feet, cables are manufactured and tested to meet the ANSI/TIA 568-C.2 and ISO/IEC 11801 Class E standards left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- 0.0 0.0 0.0 0.0 |
| 506 | (a) 34.09A (ii) Supply and erection of telephone cable with solid bare copper conductor, special grade PE insulation, paired, polyster taped, nylon rip cord, FR PVC sheathed, conforming to TEC Specification No. G/WIR-06/03 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- 0.0 0.0 0.0 0.0 |
| 507 | 34.12 |
| 508 | x 0.0 Total D4: 546734.74 0.0 D5 0.0 Providing Networking System along with allied accessories: |
| 509 | N.S.R |
| 510 | N.S.R |
| 511 | N.S.R |
| 512 | N.S.R |
| 513 | N.S.R |
| 514 | N.S.R |
| 515 | 34.01 XI |
| 516 | c 34.09A COPPER CONDUCTOR CABLES FOR SPECIAL ELECTRICAL SERVICES: 0.0 0.0 0.0 0.0 34.09A(i) Supply and erection of CAT 6 with 23AWG solid bare copper conductor, special grade PE insulation with star separator, 4pair Unshielded Twisted Pair (UTP) industrial cable, FR PVC sheathed, Class-E, 250 MHz of bandwidth, supporting data transfer speeds of up to 10 Gbps (10GBASE-T) for distances up to approximately 180 feet, cables are manufactured and tested to meet the ANSI/TIA 568-C.2 and ISO/IEC 11801 Class E standards left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- 0.0 0.0 0.0 0.0 |
| 517 | 34.12 |
| 518 | x 0.0 Total D5: 691890.52 0.0 D6 0.0 Providing CCTV System: |
| 519 | N.S.R |
| 520 | N.S.R |
| 521 | N.S.R |
| 522 | 34.09A(i) |
| 523 | 34.12 |
| 524 | x 0.0 Total D6: 1404278.0 0.0 D7 0.0 Providing Addressable Fire Detection, Emergency Evacuation System including exit signage: 0.0 FIRE PANELS & ANNUNCIATORS: 0.0 0.0 0.0 0.0 |
| 525 | N.S.R |
| 526 | N.S.R |
| 527 | N.S.R |
| 528 | N.S.R |
| 529 | N.S.R |
| 530 | N.S.R |
| 531 | N.S.R |
| 532 | N.S.R |
| 533 | N.S.R |
| 534 | N.S.R |
| 535 | N.S.R |
| 536 | N.S.R |
| 537 | N.S.R |
| 538 | N.S.R |
| 539 | N.S.R |
| 540 | N.S.R |
| 541 | N.S.R |
| 542 | N.S.R |
| 543 | N.S.R |
| 544 | N.S.R |
| 545 | N.S.R |
| 546 | 34.09 |
| 547 | xii (d) 34.09A (iii) Supply and erection of fire survival cable for fire alarm & PA system with annealed stranded copper conductor, fire resistant mica tape wrapped (at 950°C for 180 minutes), XLPE insulated, LSHZ (low smoke & zero halogen) bedding, LSZH (low smoke & zero halogen) red outer sheath, galvanized steel wire armour, 600/1000 volts grade, Fire resistant to IEC 331 & BS7846 F2/BS6387 & CWZ, Acid gas emission to BS EN 50267 (IEC60754), smoke emission to BS EN 50268 (IEC61034) and flame propagation to BS EN 50265, BS EN 50266 (IEC 60332-3) left bare in pipe or casing or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:- 0.0 0.0 0.0 0.0 |
| 548 | 34.11 |
| 549 | (vii) |
| 550 | 34.12 |
| 551 | x 0.0 Total D7: 4652434.5 0.0 D8 0.0 Providing, Installation, Testing and Commissioning of Audio Video System for Assembly Hall & Conference Room 0.0 0.0 0.0 0.0 |
| 552 | N.S.R |
| 553 | N.S.R |
| 554 | N.S.R |
| 555 | N.S.R |
| 556 | N.S.R |
| 557 | N.S.R |
| 558 | N.S.R |
| 559 | N.S.R |
| 560 | N.S.R |
| 561 | N.S.R |
| 562 | N.S.R |
| 563 | N.S.R |
| 564 | N.S.R |
| 565 | N.S.R |
| 566 | N.S.R |
| 567 | N.S.R |
| 568 | N.S.R |
| 569 | N.S.R |
| 570 | N.S.R |
| 571 | N.S.R |
| 572 | N.S.R |
| 573 | 34.09 |
| 574 | xii (d) |
| 575 | 34.11 |
| 576 | (vii) |
| 577 | 34.09A (iii) |
| 578 | 34.12 |
| 579 | x 0.0 Total D8:- 7511619.0 0.0 D9 0.0 Providing Silent Diesel Generating Sets: For Main Building: 1No. 160 KVA DG Set with AMF panel For HVAC Load of the Building: 1No. 320KVA with AMF Panel |
| 580 | 0.0 0.0 ACOUSTIC ENCLOSURE: The enclosure shall be fabricated out the CRCA sheet of thickness not less than 1.6 mm on the outside cover with inside cover having not less than 0.6 mm thick perforated powder coated CRCA sheet. It should be IP54 Suitable for outdoor installation exposed to weather conditions, noise level up to 75 dB (A). All sheet metal parts should be processed through 7-tank pre treatment process and batteries accommodated in the battery rack .The acoustic lining should be made up of high quality insulation material i.e. Rockwool / glass/ mineral wool / PU foam of appropriate thickness & density for sound absorption.The inside of enclosure should be provided with at least one no. 28 W-T5 fluorescent tube light/ LED 10Watt luminaries controlled by a 5A switch for adequate lighting during servicing etc.with 2 year warranty from the date of installation. complete in all respect as desired by engineer at site:-The Generator set should be instaaled at site on the suitable size existing plinth of RCC as per specifacation DG set as per satisfacation of the Engineer- in-Charge at site. The model of engine will be decided by the Engineer in Charge. AMF PANEL: AMF panel shall be fabricated out of 1.6 mm sheet steel, totally enclosed, dust, damp and vermin proof wall mounted/ free standing floor mounted type with IP-53 degree of protection & front operated, composite meter for digital display, HRC fuses of suitable rating. MCCB (Microprocessor based release) /ACB (Overcurrent/ overload, shorcircuit, instantenous, earth fault protection) should be used. Battery charger complete with voltage regulator, Voltmeter and Ammeter for charging the battery from external mains. This will be in addition to the battery charging alternator or dynamo fitted on the engine.All the components in the control panel shall be properly mounted, duly wired and labeled. Suitable terminals are to be provided for panel incoming and outgoing connections. System opeartion facility provided shall afford the following operational requirements. Necessary instruments and accessories such as voltmeter, power factor meter, KW meter, KWH meter, Ammeter, Frequency meter,battery charger.MCCB 4 Pole 630A, 25kA Fixed Magnetic and Adjustable Thermal Setting : 2Nos.Power Contactor 4 pole, AC-3 duty of suitable rating : 2 Nos. Digital Multifunction Meter to show, KW, KWH, KVAH, P.F. and frequency, CL-1, etc:1 No.\\"R, Y, B' LED indicating lamps & \\"ON / OFF\\" LED indicating lampsOver Voltage relay & Under Voltage relayBattery charger (with trickle and boost charging): 1 Set.8 window Alarm annunciator with separate hooter, accept, reset and rest push button:1No.The First filling of 100Litre Diesel in Fuel tank is included in this cost. The model of engine will be decided by the Engineer in Charge. The Generator set should be installed at site on the suitable size existing plinth of RCC as per specifacation DG set as per satisfacation of the Engineer- in-Charge at site. The model of engine will be decided by the Engineer in Charge: 1.0 No. 0.0 0.0 4351873.0 0.0 4351873.0 Rupees Forty Three Lakh Fifty One Thousand Eight Hundred Seventy Three Only 4351873.0 0.0 0.0 160 KVA DG Set with AMF Panel for For Main Building: 0.0 0.0 0.0 0.0 |
| 581 | 0.0 0.0 ACOUSTIC ENCLOSURE: The enclosure shall be fabricated out the CRCA sheet of thickness not less than 1.6 mm on the outside cover with inside cover having not less than 0.6 mm thick perforated powder coated CRCA sheet. It should be IP54 Suitable for outdoor installation exposed to weather conditions, noise level up to 75 dB (A). All sheet metal parts should be processed through 7-tank pre treatment process and batteries accommodated in the battery rack .The acoustic lining should be made up of high quality insulation material i.e. Rockwool / glass/ mineral wool / PU foam of appropriate thickness & density for sound absorption.The inside of enclosure should be provided with at least one no. 28 W-T5 fluorescent tube light/ LED 10Watt luminaries controlled by a 5A switch for adequate lighting during servicing etc.with 2 year warranty from the date of installation. complete in all respect as desired by engineer at site:AMF PANEL: AMF panel shall be fabricated out of 1.6 mm sheet steel, totally enclosed, dust, damp and vermin proof wall mounted/ free standing floor mounted type with IP-53 degree of protection & front operated, composite meter for digital display, HRC fuses of suitable rating. MCCB (Microprocessor based release) /ACB (Overcuurent/ overload, shorcircuit, instantenous, earth fault protection) should be used. Battery charger complete with voltage regulator, Voltmeter and Ammeter for charging the battery from external mains. This will be in addition to the battery charging alternator or dynamo fitted on the engine.All the components in the control panel shall be properly mounted, duly wired and labeled. Suitable terminals are to be provided for panel incoming and outgoing connections. System opeartion facility provided shall afford the following operational requirements. Necessary instruments and accessories such as voltmeter, power factor meter, KW meter, KWH meter, Ammeter, Frequency meter,battery charger.MCCB 4 Pole A 35kA microprocessor based release: 2Nos.Power Contactor 4 pole, AC-3 duty of suitable rating : 2 Nos. Digital Multifunction Meter to show, KW, KWH, KVAH, P.F. and frequency, CL-1, etc:1 No.\\"R, Y, B' LED indicating lamps & \\"ON / OFF\\" LED indicating lampsOver Voltage relay & Under Voltage relayBattery charger (with trickle and boost charging): 1 Set.8 window Alarm annunciator with separate hooter, accept, reset and rest push button:1No.The model of engine will be decided by the Engineer in Charge. The Generator set should be installed at site on the suitable size existing plinth of RCC as per specifacation DG set as per satisfacation of the Engineer- in-Charge at site. The model of engine will be decided by the Engineer in Charge. 1.0 No. 0.0 0.0 2460100.0 0.0 2460100.0 Rupees Twenty Four Lakh Sixty Thousand One Hundred Only 2460100.0 0.0 0.0 INDOOR LT CABLES, CABLE TRAY & DWC PIPE: 0.0 0.0 0.0 0.0 |
| 582 | 34.10D |
| 583 | (xxviii) |
| 584 | 34.09xiv |
| 585 | 34.37 A |
| 586 | 34.14 |
| 587 | 34.14iii |
| 588 | 34.14v(b) |
| 589 | 34.14v(d) 0.0 Total D9: 7590914.04 0.0 D10 0.0 Providing 11 KV Sub Station:For Main Building ,HVAC& PH SERVICES: 1No. 500KVA Transformer 0.0 VACUUM CIRCUIT BREAKER: NEAR MAIN GATE & SUB STATION |
| 590 | 0.0 0.0 VCB parameters are as below: (a). Rated Voltage: 12kV(b). Rated short circuit breaking current withstand : Min. 25kA for 3sec.(c). Rated insulation voltage lightning (Impulse withstand) : At 75kV Peak(d). Rated insulation voltage( Power frequency withstand) : Min. 28kV(e). Rated operating sequence : O-0.3 sec - CO - 3 min-CO(f). Spring charging mechanism : Manually as well as motor operated (230V, AC, 50Hz)(g). Operation type: Manually and electrically open (Electrical-230V, AC,50Hz) (h). Earthing Switch : Mechanically interlocked device to prevent personnel from getting electric shock during breaker maintenance. VCB incorporating mechanical as well as electrical ON/OFF indiaction \\"OFF\\" push button, test/ serviceposition limit switches, with minimum 6NO+6NC breaker auxiliary contacts in service position, Manual charging of breaker should be done without opening the front door. 0.0 0.0 0.0 0.0 0.0 Incomer shall consist of:(a). Cast Resin CT's 11kV : 600-300/1-1A, Core1: Class1, 10VA for 3phase, Core2: 5P10, 10VA(b). Cast Resin PT's 11kV : PT Ratio 11kV/√3 / 110V/√3 / 110V/√3, Class 1, Class 0.5 Burden 50VA(c). Protections : Numerical instantaneous IDMTL mimic dispaly relay (230V, AC, 50Hz) : U/V, O/V, E/F, O/C, S/C & TCS with RS 485 Modbus protocol for communication & drawout type(d). Master Trip/ Anti pumping relay(e). Digital Voltmeter : Range 0-12kV with necessary voltmeter with built in selector switch & suitable for 230V AC 96x96 sq.mm dial with shrouded terminal.(f). Digital Ammeter : Applicable Range with necessary ammeter with built in selector switch & suitable for 230V AC 96x96 sq.mm dial with shrouded terminal.(g). Multi-function meter with suitable communication to Central Software dta control & SCADA system, Converter having facility of real time data monitoring, historical trend and web dashboard(h). Necessary AC supply, healthy indication lamp & switch, TNC (Trip, Neutral & Close) breaker control switch with indicating arrangement, Local/ remote selector switch for breaker open/close operationsAll the relays shall belong to a common platform and shall be of single make with Electro-mechanical type relays in draw-out casing. PCB shall be with conformal coating to withstand heavily polluted environments. 0.0 0.0 0.0 0.0 0.0 Outgoing shall consist of:(a). Cast Resin CT's 11kV : 600-300/1-1A, Core1: Class1, 10VA for 3phase, Core2: 5P10, 10VA (b). Protections : Numerical instantaneous IDMTL mimic dispaly relay : E/F, O/C, S/C & TCS with RS485 Modbus protocol for communication & drawout type for line feeder protection(c). Master Trip/ Anti pumping relay(d). Transformer Protection : 3 elements auxiliary relay (230V, AC, 50Hz) for transformer fault, Alarm for Buchholz, winding temperature & oil temperature (e). Digital Ammeter : Applicable Range with necessary ammeter with built in selector switch & suitable for 110V AC 96x96 sq.mm dial with shroded terminal(f). Multi-function meter with suitable communication to Central Software dta control & SCADA system, Converter having facility of real time data monitoring, historical trend and web dashboard(g). Necessary AC supply, healthy indication lamp & switch, TNC (Trip, Neutral & Close) breaker control switch with indicating arrangement, Local/ remote selector switch for breaker open/close operationsAll the relays shall belong to a common platform and shall be of single make with Electro-mechanical type relays in draw-out casing. PCB shall be with conformal coating to withstand heavily polluted environments:- 0.0 0.0 0.0 0.0 0.0 11kV, 3Phase, 50Hz, Indoor metal clad, floor mounted, ‘Horizontal draw out’ type VCB (Vacuum Circuit Breaker) Switch board unit 630 Amp. which includes 1 No. 630 /800Amp. Vacuum Circuit Breaker as Incomer, 1No. Vacuum Circuit Breaker as Out going feeder with in built power packs interconnected with Electrolytic Copper bus bars of suitable rating (1No.500 KVA Transformer). 2.0 Job 0.0 0.0 1099867.0 0.0 1099867.0 Rupees Ten Lakh Ninety Nine Thousand Eight Hundred Sixty Seven Only 2199734.0 0.0 0.0 TRANSFORMER 500KVA: 0.0 0.0 0.0 0.0 |
| 591 | 0.0 0.0 Design, supply, installation, testing and commissioning of APFC Panel of 160 KVAR capacity with 7% detuned reactor suitable for operation on 415 ± 5% Volt, 3 Phase, 50 Hz, Ac supply, having MPP type resin bounded static capacitors (without oil) of suitable rating complete with MCCB Four Pole 250amp., 415volts, ≥36kA Microprocessor Based Adjustable Thermal and Magnetic Setting (Ics = 100%) capacity panel, upto 12 step microprocessor based power factor controller relay capable to select the rating from 2Nos. x 10KVAR, 2Nos. x 20KVAR, 4Nos. x 25KVAR capcitor bank, current limiting contactors for each capacitors protected with suitable rating MCCBs of minimum 25 KA breaking capacity having thermal magnetic release for over load & short circuit protection, cooling fans for panel and digital multifunction meter, Class-1.0 with RS485 communication port indicating lights, earthing the panel etc. as reqd. The panel should have provision of timer based circuit in APFC relay to switch ON and OFF the static part of 160 KVAR capacity, automatically as and when required. Capacity of static capacitor should be accommodated from the overall rating of the panel and should be designed to switch in independently. The panel should be manufactured with1.6 mm thick CRCA sheet duly powder coated etc complete as per PWD specification complete as per satisfaction of the Engineer in charge at site. 1.0 Job 0.0 0.0 412971.0 0.0 412971.0 Rupees Four Lakh Twelve Thousand Nine Hundred Seventy One Only 412971.0 0.0 |
| 592 | 0.0 0.0 Incomer:800 Amp.415volts 50KA,, 4P EDO ACB = 1No. (From Transformer 500KVA)Outgoings-1: .■ 630amp. 415 volts breaking capacity ≥36kA, FP microprocessor based adjustable thermal and magnetic protection MCCB unit = 1No .(HVAC)Outgoings-2:■250amp. 415 volts breaking capacity ≥36kA, FP microprocessor based adjustable thermal and magnetic protection MCCB unit = 1Nos .(APFC)■ 400amp. 415 volts breaking capacity ≥36kA, FP microprocessor based adjustable thermal and magnetic protection MCCB unit = 1Nos .(BUILDING)■ 125amp. 415 volts breaking capacity ≥25kA, FP microprocessor based adjustable thermal and magnetic protection MCCB unit = 1Nos .( 1 SPARE)■200amp. 415 volts breaking capacity ≥25kA, FP microprocessor based adjustable thermal and magnetic protection MCCB unit = 1Nos .(1 SPARE)■1000 A ALUMINIUM BUS BAR. ■ All Incomers & Out going With Extendable Rotary Handle with adjustable depth complete as per schematic diagram attached & Satisfaction of the Engineer in charge at site.Enclosure: Panel Size: As per Norms 1.0 Job 0.0 0.0 438400.0 0.0 438400.0 Rupees Four Lakh Thirty Eight Thousand Four Hundred Only 438400.0 0.0 |
| 593 | 34.23 A 0.0 Busbars: The panel shall be provided with TPN aluminium busbar of suitable size according to the size of MCCB's. Busbar shall be of high conductivity (53% to 58%) E91-E Grade aluminium (1A/Sq.mm). All Busbar will be air insulated with codified in Red, Yellow, Blue & Black as per standard for cable termination with the help of extended busbar only with proper adjustable cable supports. The main busbar would be supported upon non-hygroscopic SMC/DMC supports. Metering: The panel shall be completed with digital metering unit (with selector switches, voltmeter & ammeter) epoxy insulator, gasket, PVC sleeves, CT's & L.E.D. type indicator etc. Manufacturer of Panel should be CPRI Approved (Approval not older then 5 years) & ISO certified (Manufacturer workshop as per ISO 9001: 2015 standard) The Concerned contractor shall be approved the detailed drawing of panel with complete specification from the Engineer in charge at site.Detail of capacities of MCCB's to be installed in the cubical panel Enclosure (Excluding the cost of MCCB's) as per following:- 0.0 0.0 0.0 0.0 |
| 594 | 34.23B |
| 595 | 34.16 A |
| 596 | 34.22 A |
| 597 | ix 0.0 HT CABLE, END TERMINATION KITS & CONTROL CABLE FOR TRANSFOMER: |
| 598 | 34.36-A |
| 599 | 34.36-B |
| 600 | 34.36 C |
| 601 | 34.09xiv |
| 602 | b 0.0 INDOOR LT CABLES, CABLE TRAY & DWC PIPE: 0.0 0.0 0.0 0.0 |
| 603 | 34.10D |
| 604 | xxxvii |
| 605 | 34.37 A |
| 606 | 34.25 |
| 607 | 34.34 A |
| 608 | 34.38C |
| 609 | 34.38A |
| 610 | ix 34.14 COPPER EARTHING 0.0 0.0 0.0 0.0 |
| 611 | 34.14iii |
| 612 | 34.14iv |
| 613 | 34.14v(a) |
| 614 | 34.14v(b) |
| 615 | 34.14v(e) 0.0 SUB STATION SAFETY EQUIPMENTS: 0.0 0.0 0.0 0.0 |
| 616 | 28.125c |
| 617 | 28.124c 0.0 Total D10: 7223989.4 0.0 D11 0.0 Providing Campus & Flood Lighting: |
| 618 | 34.31 A |
| 619 | 34.29c i Supply and erection of G.I. Pipe 50mm dia. (Medium) Single/ Double/ Triple arm bracket of suitable length welded with MS canopy 80mm inner dia., outer dia 89.5mm (Medium), 450mm long suitable for 3 stepped steel tubular swaged and welded pole with top outer section dia. 76.1mm. The MS canopy should have 3no. holes for fixing the bracket at the top end of the pole with the help of 3Nos. ½\\" x 1½\\" size nut bolt fully threaded. The bracket should have MS sheet (1.62mm thick) ring of 89.5mm dia. for covering the top end of the canopy. The MS canopy and GI bracket should be welded at tentative angle 105º (105 degree) inclination with MS sheet 5mm thick triangular in shape having dimensions 225/300/375mm x 150mm x 5mm thick (225mm for 1.5m, 300mm for 2m & 375mm for 2.5m long bracket) with two coats of an approved aluminium paint as desired by Engineer-in-charge at site:- 0.0 0.0 0.0 0.0 |
| 620 | 34.38 |
| 621 | 34.10 D |
| 622 | (xxii) (iii) Overall size 16sq.mm (2Core) Un-armoured (Loose) 450.0 mtr. 68.0 0.9 129.2 0.05 136.11 Rupees One Hundred Thirty Six And Eleven Paise Only 61249.5 0.0 |
| 623 | 34.37 |
| 624 | 34.13xiii a Earthing with 8 S.W.G. (4mm dia.) G.I. wire in 15mm dia G.I. pipe with G.I. reducing socket 50mm x 15mm (upto 8Metre in length) 2.0 nos 2518.0 0.25 3147.5 0.05 3315.89 Rupees Three Thousand Three Hundred Fifteen And Eighty Nine Paise Only 6631.78 0.0 |
| 625 | 34.13xvi (a) |
| 626 | 34.13 xv a GI Earth rod 20 mm dia. 3 mtr. Long 20.0 nos 968.0 0.25 1210.0 0.05 1274.74 Rupees One Thousand Two Hundred Seventy Four And Seventy Four Paise Only 25494.8 0.0 |
| 627 | 34.09 ii Overall size 1.5sq.mm (Un-sheathed) 360.0 mtr. 18.0 0.6 28.8 0.05 30.34 Rupees Thirty And Thirty Four Paise Only 10922.4 0.0 iv Overall size 4sq.mm (Un-sheathed)(For Dp switch) 10.0 mtr. 39.0 0.6 62.4 0.05 65.74 Rupees Sixty Five And Seventy Four Paise Only 657.4 0.0 |
| 628 | 34.10C |
| 629 | 34.33vii |
| 630 | 34.38 C |
| 631 | 34.38A |
| 632 | (iii) |
| 633 | 34.38i |
| 634 | 34.2 0.0 Supply and erection of sheet metal bus-bar chamber (factory fabricated) duly powder coated on existing surface with required 4Nos. of tin plated copper bus-bar strips of suitable length and cross-sectional area mounted on DMC/ SMC moulds at sufficient distance, enclosure made of M.S. sheet 1.6mm thick with hinged cover and lock, fitted with dust excluding gaskets and secured with sufficient no. of cadmium plated iron screws and of given overall dimensions and to be fixed with G.I. bolts and nuts/ rag bolts and nuts etc. complete with all accessories including connections with suitable size of thimbles, bonding to the existing earth and painting etc. as desired by the Engineer-in-charge at site:- 0.0 0.0 0.0 0.0 (ii) Bus Bar Chamber 63amp., 415volts Overall Dimensions (350mm x 450mm x 150mm) nominal 1.0 Each 4648.0 0.3 6042.4 0.05 6365.67 Rupees Six Thousand Three Hundred Sixty Five And Sixty Seven Paise Only 6365.67 0.0 |
| 635 | 34.18 |
| 636 | 34.12 |
| 637 | x 0.0 Total D11 760653.3 0.0 D12 0.0 Providing Solar Power Generation System: |
| 638 | 0.0 0.0 Supply, Installation, testing & Commissioing of Grid interactive PV System Solar Power Plant Monocrsystalline Solar Panel Consist of 400 Watt+ (i.e connected to utility grid) of Minimum 63 KWp including required quantities of SPV modules formed into arrays, their mounting arrangement, Power conditioning units (i.e String Solar Inverter), required DC & AC distribution panels with surge protection units, cabling from terrace to main distribution board through Cable tray, Bi Directional Energy Meter, Required Earthing (i.e. 2 Nos.GI Strip Earthing for GI Structure, 2Nos. GI Strip Earthing for String Inverter, AC & DC Distribution System), ESE Stroke master (As per NFC 17 102 Standard with suitable radius of protection) & 3 Nos. chemical earthing with copper bonded rods along with high rise GPSP structure (Rated Wind Speed 170Kph) including mounting height upto 8 feet Complete with transportaion, fabrication, labour & Civil Work.Features:- 1. Solar PV Module Warranty 25 Years & Certified Under IS/IEC 61730 I & II, IS/ IEC 61701 & IS/IEC 14286 2. Power Conditioning Unit (String Solar Inverter) & Certified under IEC/EN 62109-1, IEC/EN 62109-2, EN 61000-6-2, EN 61000-6-3, IEC 61683, EN 50530, IEC 60068-2-1, 2, 14, 30, EN 605293. Structure : 25 Years Service Life with AMC & Certified under IS 2062:20114. Complete Plant Insurance for the period of 5 Years (Excluding Theft of the material) 5. Annual Maintenance Contarct for the period of 5 Years 63.0 KWp 0.0 0.0 38173.15 0.0 38173.15 Rupees Thirty Eight Thousand One Hundred Seventy Three And Fifteen Paise Only 2404908.45 0.0 0.0 Features: 1. Solar PV Module warranty 25 Years & certified under IS/IEC 61730 I & II IS/IEC 61701 & IS/EC 142862. Power Conditioning unit (string solar inverter) & certified under IEC/EN 62109-1, IEC/EN 62109-2, EN 61000-6-2, EN 61000-6-3, IEC 61683, EN 50530, IEC 60068-2-1, 2, 14, 30, EN 605293. Structure 25 Years service life with AMC & certified under IS 2062 20114. Complete Plant insurance for the period of 5 Years (Excluding Theft of the Material)5. Annual Maintenance contract for the period of 5 Years1 Solar PV Module:2 Power Conditioning Unit: 3. Sloar Inverter: 4. Batteries3 AC/DC Distribution Board:4 Fusion Mount structure: 5 Lightning Arrester with chemical Earthing:The work will got done from approved MNRE (Misitry of New and Renewable Energy) / PEDA (Punjab Energy Development Agency) contractor/PWD enlisted contractor subject to condition that PWD enlisted contractor wiill get work done from MNRE/PEDA approved contractorThe capacity of solar power plant may increase or decrease as availability of site it can also be totally removed by concerned Engineer-in-charge of work.. 0.0 0.0 0.0 0.0 0.0 Total D12: 2404908.45 0.0 Total D1+D2+D3+D4+D5+D6+D7+D8+D9+D10+D11+D12:- 43242330.56 0.0 Cost of Ciivil work 137539301.12 0.0 Cost of Internal Public health services 33235125.13 0.0 Cost of Internal Electrical services 43242330.56 0.0 x 214016757.0 0.0 y Povision fo Cultural Cess on Gross Amount Perecent 0.01 Rupees And One Paise Only 15 214016757.0 Perecent 0.01 0.01 Rupees And One Paise Only 2140167.57 0.0 Total estimated cost in figures including Cultural Cess (x+y) - - - 216156924.57 0.0 Quoted Amount 216156924.57 216156925.0 0.0 Quoted rate in Words Rupees Twenty One Crores Sixty One Lakh Fifty Six Thousand Nine Hundred Twenty Five Only |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
| 6 | Click here to download tender document | Tender Documents |
| 7 | Click here to download tender document | Tender Documents |
| 8 | Click here to download tender document | Tender Documents |
| 9 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
