|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GARRISON ENGINEER CHILKA, INS CHILKA, KHURDA, ODISHA - 752 037 NAME OF WORK : MISC REPAIR TO BLDGS IN ZONE-I AND ZONE-II AT INS CHILKA UNDER GE CHILKA Contract No : GE/CHL/8179 OF 2025-26 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT With Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Demolition of brick work/stone masonry built in cement mortar and removal of rubbish from site complete all as specified and directed. |
| 3 | M&L for old size brick work with fly ash bricks, straight or curved on plain exc 6m mean radius built in cement mortar 1:6 etc all completed. |
| 4 | M&L for old size brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) etc all completed. |
| 5 | Taking down cement plaster of any description on brick or stone walls, ceilings, fins, fascias, chajjas, parapets etc. (including tiles) raking out joint, hacking for key, scrubbing down with water etc incl patches of any size complete all as specified and directed by Engr-in-Charge. |
| 6 | M & L for 15 mm thick cement plaster in CM 1:4 brick work or concrete surfaces shall be finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 7 | M & L for 10mm thick cement plaster on fair faces of brick or concrete surface in cement mortar ( 1:6) finished even and smooth without using extra cement etc complete all as specified and directed by Engr-in-Charge. |
| 8 | M&L for 5 mm thick rendering in CM 1:3 on ceiling including finishing the surfaces even and smooth, without using extra cement etc complete all as specified and directed by Engr-in -charge. |
| 9 | M&L for preparation of new plastered external wall surfaces applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. as per manufacturer's instruction complete all as specified and directed by Engineer -in - Charge. |
| 10 | M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coat oil bound distemper over a coat of alkali resistant primer complete all as specified and directed by Engr-in-Charge. |
| 11 | M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying three coat white wash complete all as specified and directed by Engr-in-Charge. |
| 12 | M&L for preparing old surfaces plastered or unplastered of existing treatment on wall, chajjas & cantilever portion and making good the undulated surfaces of wall, chajjas and cantilever portion by filling of putty including rubbing, scraping & grinding make the wall surface smooth & applying two coats of weather proof acrylic emulsion paint exterior grade of over a coat of primer on prepared external surfaces of walls of any description over 10 cm width/girth etc on column/pillars , RCC chajja and facia approved colour all as specified. |
| 13 | M&L for complete removal of existing treatment and applying two coats of oil bound distemper over one coat of primer on wall complete all as specified and directed. |
| 14 | M&L for preparing old decorated plastered surfaces including brooming down or steel wire brushing, scraping down moulds, mass and efflorescent salts and greasy spots and applying two coat of white wash on walls etc all as specified & directed. |
| 15 | Preparation of old steel surface of any description, over 10cm in width or girth not other wise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 16 | Preparation of old painted surfaces of wood and wood based surfaces of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed. |
| 17 | S&F in repairs 4 mm thick PVC coated GI wire rope for hanging cloths including fixing arrangement with steel member (as per sample) complete all as specified and as directed |
| 18 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), complete all as specified and directed by Engr-in -charge. |
| 19 | M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick square /rectangular) area of each tileexceeding 0.11 sqm but notexceeding 0.18 sqm, in floors etc. set and jointed inneat cement slurry andpointed in white or coloured cement to match fixed over and including screed bed 15 mm thick in CM 1:6 etc complete all as specified and directed by Engr-in-Charge. |
| 20 | Ditto all as item 18 above, but as in skirting or vertical surfaces with cut to size tiles fixed over and including backing coat of 15mm thick in CM 1:4 etc complete all as specified and directed by Engr-in-Charge. |
| 21 | M&L Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tilesnot exceeding 0.36 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including screed bed 15 mm thick in CM 1:6 etccomplete all as specified and directed by Engr-in-Charge. |
| 22 | M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each coloured tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including screed bed 15 mm thick in CM 1:6 etccomplete all as specified and as directed. |
| 23 | M&L coloured glazed coloured ceramic tiles in vertical surface 350x250x6 to7mm / 450 x 350 x 6to7 mm thick set and jointed in neat cement slurry and pointed in colour cement to match fixed over and including backing coat of 15mm thick in CM 1:4 etc complete all as specified |
| 24 | S&F coloured glass mosaic tiles of size 20x20x2 to 3mm thick in floor/wall of swimming pool etc set with adhesive of approved tiles and grouted/pointed with white cement with pigment to match the shade of tiles fixed over and including backing coat of 15mm thick in CM 1:4 etc complete all as specified and directed |
| 25 | M & L for chequered colour cement concrete tiles with grey cement and pigment of size 30x30cmx 25mm thick set jointed and pointed in neat cement slurry in floors/steps including screed bed or bedding layer of morter 15mm thick in cm 1:6 complete all as specified and directed |
| 26 | M & L for Machine pressed precast conctete interlocking paver block with grey cement and pigment of any shape, colour and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade fixed over and including sand filling 50mm thick etc complete all as specified and directed |
| 27 | Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) as in repairs. |
| 28 | M & L for 75mm thick PCC type C2 1:3:6 (40mm garade aggregate) as in plinth protection complete all as specified and directed |
| 29 | Taking down existing waterproofing tratment complete of any description from brick or RCC wall and RCC slab by scrapping including removal of rubbish where directed to a distance not exceeding 100m and applying water proofing treatment to roof as per per manufacturer's instructions with the following specification:-.(a) 10 mm thick plastering in cement mortar 1:4 mixed with and including water proofing compound @3% by weight of cement including preperation of roof surfaces.(b) Applying evenly a coat of bitumineous primer @ 0.5 litre per Sqm(c) Applying evenly a coat of hot blow bitumen 85/25 grade @ 1.2 Kg per Sqm (d) Applying APP based polymeric membrane minimum 3 mm thick and minimum weighing 3kg/sqm laid on primed surface by LPG forced torch application with a side & end overlaps of minimum 100 mm.(e) Applying evenly a coat of hot blown bitumen 85/ 25 grade @ 1.2 Kg per Sqm over water proofing membrane (f) Applying a coat of bituminous based aluminium primer @ 100 gm/Sqm on top including sealing all joints by thermo fusion complete all as per manufacturer's instructions |
| 30 | Supply only water proofing compound. |
| 31 | Preparation of sunken portion slab surfaces by applying 15mm thick water proof plaster in CM 1:3 on roof slabs finished even & smooth including cleaning surfaces apply approved epoxy resing coating polymer modified cement sunken floor area shall be applied onto the prepared sunken partion area complete all as specified |
| 32 | M&L for PCC 1:5:10 type E2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete |
| 33 | M&L for Plain cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate), 25mm thickness as in levelling course of floors etc complete all as specified and as diretced |
| 34 | S & F in repairs providing & Fixing false ceiling with semi perforated 12mm thick micro tegular edged GRG false ceiling tiles.at all height with GRG ( Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x595 mm of approved texture, design and patterns having moisture content less than 2% humidity resistance of 99 % NRCO. 50 to 0.75 as per IS 8225-1987, nonombustible as per BS 476 (part-4)-1970 and light reflectance of 85 % (miinimum) to be laid in true horizontal level suspended on interlocking metal T-grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x32 mm of length 3000mm cross-T of size 15x32mm of length 1200mm and secondary intermediate cross -T of size 15 x32 mm of length 600mm to form gris dodule of size 500 x 600 mm suspended from ceiling using galvanised mild steel items (galvanized @ 80 grams per sqm) i.e 50 mm long 8mm outer diameter M S dash fasteners 6mm dia fully threaded hanger rod upto 1000 mm length and L shape level adjuster of size 85x25x2mm galvanised iron perimeter wall angle of size 24x24x0.40 mm of length3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall wood screws. The work shall be carried out as per specifications drawing and as per directions of the Engineer-in- Charge. |
| 35 | Dismantling plain or corrugated steel sheeting gauge , thickness , including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 36 | S&F pre-painted galvalume aluminium zink coating GI based corrugated steel sheets 0.50 mm thick of an colour having tensile strength of 550 MPs as in roof covering/cladding to walls , fixed with self tapping screws complete all as specified and directed. |
| 37 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 38 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 39 | S & F of roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410- W(Gde-E-250) quality- A complete all as specified and directed |
| 40 | M & L for preparing new steel surfaces of any description over 10 cm girth and width and applying two coat of synthetic enamel paint over and including a coat of red oxide primer, complete all as specified. |
| 41 | Disconnecting existing exc 500 ltr and not exc 1000 ltr tanks setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. |
| 42 | S&F in repair 25 mm dia bore of pipe Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) complete all as specified and as directed. |
| 43 | S&F in repair 20 mm dia bore of pipe Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and as directed. |
| 44 | S&F 500 ltr capacity Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top shall be threaded closing system) hoisted and fixed in position including provision of inlet, outlet overflow and wash out connections and taking down the unserviceable tank complete all as specified and as directed. |
| 45 | S&F 1000 ltr capacity Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top shall be threaded closing system) hoisted and fixed in position including provision of inlet, outlet overflow and wash out connections and taking down the unserviceable tank complete all as specified and as directed. |
| 46 | S&F 2000 ltr capacity Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top shall be threaded closing system) hoisted and fixed in position including provision of inlet, outlet overflow and wash out connections and taking down the unserviceable tank complete all as specified and as directed. |
| 47 | Taking down chowkats or frames not exceeding 1.5 Sqm each but with shutters (without taking off shutters from the frames) all as specified. |
| 48 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed. |
| 49 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 50 | S&F mediam weight, cold rolled mild steel butt hinges of 100 mm size, complete all as specified and as directed. |
| 51 | S&F extruded aluminium alloy handles, 150mm long fabricated type, anodised all as specified and as directed. |
| 52 | S&F aluminium anodised barrel tower bolts of extruded section, length of bolt 150mm with dia of shoot / bolt 10mm complete all as specified and as directed. |
| 53 | Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or any thickness in floors, aprons etc.complete all as specified and directed |
| 54 | M&L for granite slab 20 mm thick machine cut , bedded and jointed with grey cement slurry and pointed with white cement admixture of pigment to match the sade of granite stone incl grinding and polishing such as steps, platform, counter and other similar work including screed bed or bedding layer of morter 15mm thick in cm 1:4 complete all as specified and directed |
| 55 | Rounding for edges of stone slab one edge, such as in steps cooking platform and other similar work. |
| 56 | S&F for Joist, channel, angle,MS Flat or tee sections, fixed independently, without connecting plates, etc. cut to ordinary lengths as in fencing posts complete etc as in chain link fencing posts and struts including cutting tops to shape as directed, drilling holes, notching for wire, etc for securing wire mesh etc, and similar work conforming to Fe-410 Gde E-250 all as specified and as directed |
| 57 | S&F in repair for galvaniseed. 2 strand , steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and stranding and fixing to any type of slandered rails straining bolts, including, securing or tying at crossing with clips complete as specified and directed. |
| 58 | S & F in repair concertina coil SRPBT fence comprising of SRPBT helix concertina of 600mm dia (before stretch) having 50 no of trun 125 clip, barb length 23.5mm 2.5mm high carbon core wire, tape width 18.60mm, centre width 7.40mm etc. Including taking down and anticorrosive bitumen coated as per 15:158 stretch P/coil =6 mtr Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
