|
| 1 | Taking down Chowkats or frames, area of opening n'exc 1.5 Sqm each (without taking off shutters from the frame) complete all as specified and directed. |
| 2 | Taking down Chowkats or frames, area of opening exc 1.5 Sqm but n'exc 4 Sqm each (without taking off shutters from the frame) complete all as specified and directed. |
| 3 | S&F Pressed steel frame 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete all as specified and fixed, including preparation of new primed surface and applying two coats of synthetic enamel paint over steel surface complete all as specified and directed |
| 4 | S&F Pressed steel frame 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete all as specified and fixed, including preparation of new primed surface and applying two coats of synthetic enamel paint over steel surface complete all as specified and directed |
| 5 | M & L for PCC (1 2 4) type B-1 using 20mm for filling in door frames complete all as specified and directed. |
| 6 | S&F factory made single extruded WPC (Wood Polymer Composite) solid Frames/ Chowkhat for door/ window/ Ceosetory windows etc of size 45 x 70 mm, fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.NOTE :(i) The WPC shall comprising of virgin PVC polymer of K value 58-60 Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms). (ii) The frame shall fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws.(iii) The WPC shall have minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant.(iv) The cost of M.S. hold fast/ lugs or SS dash fasteners shall deemed included in quoted unit rate. Each frame shall be fixed with min 06x holdfasts/ faster's. |
| 7 | S&F 30 mm Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size withnecessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 8 | All as pe item No. 07 above but decorative type flush door shutter of size 35mm thick |
| 9 | S&F 30mm thick plain WPC factory made glazed Skeleton door shutters (conforming as per IS-4020) with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door to be panelled with SS mosquito mesh and XTN aluminium mesh for additional strength and safety purpose. Door should be fixed with SS hinges and SS screws. Door should be water prrof, termite proof, fire retardant and having screw holding capacity complete all as per manufacturers specification & drawings & as directed by Engr-in-charge.(Note: Required stainless steel butt hinges and necessary S S screws shall be included and stainless steel wiremesh also included.) |
| 10 | M&l for providing and fixing factory made UPVC Sliding window (Three track white colour), area n'exc 2.0Sqm each, made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm) including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2+ -0.2mm thick, Touch Lock of zinc alloyed (white powder coated), roller system, wire cloth and/or plain glass in penal of shutters, fixed to the wall with 8mm x 100mm long fasteners complete all as specified and directed.Note: Window profile shall be hollow section with multi chamber. All sections shall be miterd cut and fusion welded at all corners. Size of profiles/ sections shall be as under :-(i) Frame - 88mm x 52mm duly inserted galvanised steel section having size 30mm x 18mm -2 nos, (ii) Sliding sash - 42mm x 67mm duly inserted galvanised steel section having size 30mm x 18mm(iii) Sliding mesh Sash - 42mm x 57mm , duly inserted galvanised steel section having size 26mm x 10mm(iv) Sliding interlock (One vertical length in each shutters-45.5mm x 28mm), (v) Glazing bead - 24.5mm x 16mm . (vi) The unit rate quoted by contractor excludes cost of glass and wire cloth but includes all other connected accessories. Net Opening will be measured for payment purpose. |
| 11 | M&L for providing and fixing factory made uPVC white colour casement (Openable) window (Area not exceeding 1.00 sqm each), made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm) Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making rrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners complete all as specified and directed.Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose. |
| 12 | M&L for providing and fixing factory made uPVC white colour fixed window (Area exceeding 1.00 sqm but not exceeding 2.00 sqm each), made of extruded profiles with wall thickness of 2.3mm(+-0.2mm) including drilling of holes for fixing hardware and drainage of water etc., m making arrangement for fixing of hardware, EPDM gasket, 1.2+ -0.2mm thick, Touch Lock of zinc alloyed (white powder coated), roller system, wire cloth and/or plain glass in penal of shutters, fixed to the wall with 8mm x 100mm long fasteners complete all as specified and directed. Note: Window profile shall be hollow section with multi chamber. All sections shall be miterd cut and fusion welded at all corners. Size of profiles/ sections shall be as under :-(i) Frame - 88mm x 52mm duly inserted galvanised steel section having size 30mm x 18mm - 2 Nos, (ii) Sliding sash - 42mm x 67mm duly inserted galvanised steel section having size 30mm x 18mm(iii) Sliding mesh Sash - 42mm x 57mm , duly inserted galvanised steel section having size 26mm x 10mm(iv) Sliding interlock (One vertical length in each shutters-45.5mm x 28mm), (v) Glazing bead - 24.5mm x 16mm . (i) Frame - 60mm x 58mm duly inserted galvanised steel section having size 28mm x 21.5mm.(ii) 'T' profile/section (One vertical length in between two shutters-60mm x 74mm duly inserted galvanised steel section having size 27mm x 17 mrn.(iii) Glazing bead -35mm x 20mm(iv) The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose. |
| 13 | S&F stainless steel wire mesh, 0.56mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed. |
| 14 | S&F 5.5 mm thick plain sheet glass as in,shutters with and including rubber gasket and natural colour anodized aluminium snap beading/glazing, clips etc complete all as specified and directed. |
| 15 | M&L for 4.0 mm thick frosted sheet glass ordinary quality and glazingoil putty n exc 0.5 sqm in each pane complete all as specified and as directed. |
| 16 | M&L for providing and applying approved quality weatherproof silicone sealant around the perimeter of uPVC window frames (internal and external sides) to seal the gap between frame and masonry/plaster surface, masking, and cleaning, complete all as specified and directed. |
| 17 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed. |
| 18 | S&F 150mm long SS handles with required full body threaded star headed counter sunk S.S screws, complete all as specified and directed. |
| 19 | S&F 200mm long SS barrel tower bolts with required full body threaded star headed counter sunk S.S screws complete all as specified and directed. |
| 20 | S&F 250 mm long SS sliding door bolt with hasp, staple (bolt type) and fixing clips with required full body threaded star headed counter sunk S.S screws complete all as specified and directed. |
| 21 | S&F 100 mm long SS butt hinges with required full body threaded star headed counter sunk S.S screws, complete all as specified and directed |
| 22 | S&F 300 mm long, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed |
| 23 | S&F 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified and directed |
| 24 | Dismantling of wooden boarding of any description fixed in any position with screws / nails etc , complete all as specified and directed. |
| 25 | M&L for providing and fixing 18mm thick factory made single extruded WPC (Wood Polymer Composite) solid board shutters for cup boards, work stations and bathroom/kitchen cabinet etc, one side white color and other side laminted fixed with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note : (i) WPC shall comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. (ii) WPCshall be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter.(iii) stainless steel butt hinges and necessary S.S screws shall be paid separately |
| 26 | M&L for providing and fixing 12 mm thick factory made single extruded WPC (Wood Polymer composite) solid plain both side white color board for backing of cup boards and bathroom/kitchen cabinets etc. with stainless steel screws etc. complete all as specified and directedNote : WPC shall comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. |
| 27 | S&F 30mm wide stainless steel continuous (piano) hinges with required full body threaded star headed counter sunk S.S screws complete all as specified and directed. |
| 28 | S&F 150 mm Hasp and staple, stainless steel, wire type, including bolt to hinge plate with required full body threaded star headed counter sunk S.S screws complete all as specified and directed. |
| 29 | S&F 50mm magnetic catches for cabinets with striking plate & magnetic stud as per sample kept in GE's offce and as approved complete all as specified and directed. |
| 30 | S&F stainless steel 150mm dia oval shape handle fancy type brass polished bright finish with required full body threaded star headed counter sunk S.S screwscomplete all as specified and directed. |
| 31 | M&L for 40 mm dia CP brass cuboard knobs fixed with nuts ,screws and washers, bright polished complete all as specified and directed. |
| 32 | M&L for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work, con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 33 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 34 | Taking down drapery rod including bracket and cap, any discription and pattern complete all as specified and directed. |
| 35 | S&F 25 mm dia stainless steel drapery rod cut to size and fixed in position including brackets, cap both ends fixed to wall complete all as directed.Note : Drapery rod for each door/ window /ventilator/ opening shall contain one pair breacket and one cap on ceach side Brakets and caps shall be strictly as per sample kept in GE's office. |
| 36 | Taking down cement plaster on brick or stone walls or ceiling etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 37 | M&L for rendering 10 mm thick on fair faces of walls of brick work or concrete surfaces in cement mortar 1:4 mixed with water proofing compound finishing the surface even and smooth without using extra cement complete all as specified and directed.Note: (i) Water proofing compound shall be mixed @ 200ml per 50Kg cement (min) or as per manufecturer's specification. WPC shall be measured & paid seprately under respective item here-in-under as 'SUPPLY ONLY'.(ii) The unit rates quoted shall be applicable for exicution of work up to 10m height and deemed included cost of all T&P ,scafolding and all safety precaution (i.e. Safety Jacket, Safety Shoes, Safety Masks, Safety Helmet, Safety harness, Safety Goggles etc) required for smooth exicution of work. Without safety precaution this work will not be allow to commence. |
| 38 | M&L for rendering 15 mm thick on other than fair faces of walls of brick work or concrete surfaces in cement mortar 1:6 finishing the surface even and smooth without using extra cement complete all as specified and directed.Note: (i) The unit rates quoted shall be applicable for exicution of work up to 10m height and deemed included cost of all T&P ,scafolding and all safety precaution (i.e. Safety Jacket, Safety Shoes, Safety Masks, Safety Helmet, Safety harness, Safety Goggles etc) required for smooth exicution of work. Without safety precaution this work will not be allow to commence. |
| 39 | M&L for rendering 5 mm thick on ceiling surfaces in cement mortar 1:3 finisheing the surface even & fair complete all as specified and directed. |
| 40 | Supply only liquid integral crystalline water proofing compound complete all as specified and directed. |
| 41 | M&L for complete removal of existing treatment on wall/roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit), make surface clean, free from dust, loose paint etc complete all as specified and directed. |
| 42 | M&L for two coats of water based premium acrylic smooth exterior emulsion of approved colour with silicon addictive & color stay technology excellent dirt pick up resistance with low VOC less than 50 gram/ltr as per the LEEDS specification anti algal propertiess in two coats @ 1.79 ltrs (undiluted)/10sq mtrs diluted with water as per manufacturer instruction applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 m. the spray machine should be of reputed paint manufacturer as mentioned in PS and accessories for applying emulsion should be able to spray in hard to reach areas and penetration of emulsion on the surface using auto roller for making the surface uniform complete all as specified and directed. Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.Make of Manufacturer : ASIAN/BERGER/NEROLAC or equivalent make as mentioned in Appx 'D'Note- The contractor shall obtain approval of the agency from GE and shall enter a memorandum of understanding (MOU) with the manufacturer duly approved by GE. The execution of work shall be commenced after the submission of MOU and necessary approval from the Engineer-in-charge. MOU shall be valid during currency of work. However during defectlibality period, if any defect is noticed, the contractor shall only be responsible for the rectification of same. |
| 43 | M&L for 1mm thick wall care putty with one coat of acrylic water based exterior grade primer @0.9 ltrs (undiluted)/10sq mtrs diluted with water 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats, complete all as specified and directed.Make of Manufacturer : ASIAN/ BERGER/ NEROLAC or equivalent make as mentioned in Appx 'D' |
| 44 | M&L for preparation of old treated surface of wall by scrapping with wire brush/sanding paper/ metal patti, removing nails etc, and make surface clean, free from dust, loose paint etc, filling drpessions, with wall care putty, to receive decorative coat/painting coat complete all as specified and directed |
| 45 | M&L for applying two coats of oil bound distemper on prepared wall surface complete all as specified and directed. |
| 46 | M&L for applying three coats of white wash on prepared ceiling surfaces, complete all as specified and directed. |
| 47 | M&L for applying two coats of synthetic enamel paints on old steel/wooden surfaces of any description over 10 cm width or girth including preparation of surface complete all as specified and directed. |
| 48 | Dismantling of sheets in roof coverings (corrugated, semicorrugated, etc.) complete all as specified and directed |
| 49 | M&L for prepainted coloured galvaniume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile stregnth of 550 mpa as in roof covering and cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 50 | M&L for prepainted coloured galvaniume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to roof wall, fixed with self tapping screws complete all as specified and directed. |
| 51 | M&L for structural steel work using rolled mild steel of grade Fe 410-W(Gde-E- 250)quality-A as in roof trusses (framed and trussed), purlins, crane gantries, rails and fastenings, heavy bracket framing (made from beam, tee, angle, channel or flat sections), including distance pieces, cleats, gusset plates etc., cut to required lengths, hoisted, fixed in position, including welding, bolting or riveting as required complete all as specified and directed. |
| 52 | S&F mild steel screw bolts diameter of neck in 16 to 20mm (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5cm but not exceeding 10 cm long complete all as specified and directed. |
| 53 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), remaving serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 54 | M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding in cement mortar (1:6) complete all as specified and as directed. |
| 55 | M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in vertical surface, skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar 1:4 Complete all as specified and directed. |
| 56 | M&L for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 sqm but n'exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick cement mortar screed bed or bedding layer (1:4) for laying floor finishes complete all as specified and directed. |
| 57 | M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including10mm thick plaster in cm 1:4 complete all as specified and directed. |
| 58 | M&L for Treatment to sunken floor and sides as mentioned here after:-(Step-I) Cleaning of RCC surface to remove existing treatment to sides and base slab by using sand blasting with compressed air.(Step-II) M&L application of a coat to sides and base of sunken with glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal -107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika Fab-I and top coat with Sika Seal-107@ 1.50 Kg/Sqm or equivalent of Forsoc or pidilite.(Step-III) M&L 15 mm thick cement plaster on side and base slab of sunken part in cement mortar 1:3 mixed with appropriate integral water proofing compound with Sika Plastocree plus as specified.(Step-IV) M&L applying evenly a tack coat of industrial bitumen 85/25 @ 1.20 Kg/Sqm on plastered surface of sunken sides & base.Note:All debris obtained from site will be thrown away out side Def Land by contractor at his own expense. |
| 59 | M&L for PCC 1:7:12 type F2 (using 40 mm graded stone aggregate) as in filling into sunken floor complete all as specfied and directed. |
| 60 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings heads, shoes, bends, swan-necks, etc., incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed. |
| 61 | S&F UPVC (SWR) 110 mm dia pipes TYPE -B Conforming to IS 13592 single socketed, in any length with rubber ring joints, fixed on walls complete all as specified and directed. |
| 62 | S&F 75 mm dia UPVC (SWR) pipes TYPE -B Conforming to IS 13592 single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 63 | S&F 75 mm dia UPVC (SWR) pipes TYPE -B Conforming to IS 13592 single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 64 | S&F UPVC (SWR) 110 mm dia pipes TYPE -B Conforming to IS 13592 single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 65 | S&F 110 mm dia UPVC (SWR) bends any radius with oval access door complete all as specified and directed. |
| 66 | S&F 75 mm dia UPVC (SWR) bends with access door any radius complete all as specified and directed. |
| 67 | S&F 110 mm dia UPVC(SWR) plain bends any radius complete all as specified and directed. |
| 68 | S&F 75 mm dia UPVC (SWR) bends any radius complete all as specified and directed. |
| 69 | S&F 110 mm dia UPVC (SWR) branch piece, (double Y) equal or unequal complete all as specified and directed. |
| 70 | S&F 75 mm dia UPVC (SWR) branch piece, (double Y) equal or unequal complete all as specified and directed. |
| 71 | S & F in repair 75 mm dia UPVC floor trap plain with grating including jointing with solvent cement complete all as specified. |
| 72 | M&L for Mild steel work in brackets, clamps, flat iron supports, holdfasts etc., fabricated from MS flat/round/angle sections, including cutting, bending, drilling, welding, and fixing in position to hold rainwater pipes against wall, with necessary bolts, nuts, washers, and painting two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 73 | Taking up or down steel tubing and connection including cleaning for refixing or removal to store 20mm bore pipe complete all as specified & directed. |
| 74 | All as per Item No. 73 above but 15mm bore pipe Please Enable Macros to View BoQ information |
| 75 | All as per Item No. 73 above but 15mm bore pipe Please Enable Macros to View BoQ information |
