|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavatedearth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. All kinds of soil |
| 2 | Dry brick on edge flooring in required pattern with bricks of classdesignation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks. |
| 3 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinthlevel : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from naturalsources : 6 graded stone aggregate 20 mm nominal sizederived from natural sources) |
| 4 | Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 5 | Centering and shuttering including strutting, propping etc. and removalof form for Lintels, beams, plinth beams, girders, bressumers andcantilevers |
| 6 | Walls (any thickness) including attached pilasters, butteresses,plinth and string courses etc. |
| 7 | Suspended floors, roofs, landings, balconies and accessplatform |
| 8 | Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 9 | Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 10 | Cement plaster skirting up to 30 cm height, with cement mortar 1:3(1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18 mm thick |
| 11 | Steel work in built up tubular (round, square or rectangular hollow tubesetc.) trusses etc., including cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer, including welding andbolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 12 | Providing corrugated G.S. sheet roofing including vertical / curvedsurface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpetwashers filled with white lead, including a coat of approved steelprimer and two coats of approved paint on overlapping of sheetscomplete (up to any pitch in horizontal/ vertical or curved surfaces),excluding the cost of purlins, rafters and trusses and including cuttingto size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m² |
| 13 | 15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with afloating coat of neat cement on the rough side of single or half brickwall. |
| 14 | 12 mm cement plaster finished with a floating coat of neat cement ofmix : 1:3 (1 cement: 3 fine sand) |
| 15 | Providing wood work in frames of doors, windows, clerestory windowsand other frames, wrought framed and fixed in position with hold fastlugs or with dash fasteners of required dia & length (hold fast lugs ordash fastener shall be paid for separately). Kiln seasoned and chemically treated hollock wood |
| 16 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows, fixing with butt hinges of requiredsize with necessary screws, excluding panelling which will be paid forseparately, all complete as per direction of Engineer-in-charge. (Note:-Butt hinges and necessary screws shall be paid separately) Second class teak wood35 mm thick shutters |
| 17 | Providing and applying plaster of paris putty of 2 mm thickness overplastered surface to prepare the surface even and smooth complete. |
| 18 | Applying one coat of water thinnable cement primer of approved brandand manufacture on wall surface :Water thinnable cement primer |
| 19 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqmover and including priming coat of exterior primer applied@ 2.20 kg/10 sqm) |
| 20 | Finishing with Deluxe Multi surface paint system for interiors andexteriors using Primer as per manufacturers specifications :Painting wood work with Deluxe Multi Surface Paint ofrequired shade. Two or more coat applied @ 0.90 ltr/10sqm over an under coat of primer applied @0.75 ltr/10sqm of approved brand and manufacture |
| 21 | Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 22 | Finishing with Deluxe Multi surface paint system for interiors andexteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint togive an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture |
| 23 | Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarsesand(zone-III) : 4 graded stone aggregate 6mm nominal size ), reinforcedwith 1.6 mm dia mild steel wire, including centering and shuttering,roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement:3 fine sand) etc. complete, excluding plastering of the jambs, sills andsoffits. 50 mm thick |
| 24 | Providing and fixing G.I. pipes complete with G.I. fittings includingtrenching and refilling etc. 25 mm dia nominal bore |
| 25 | Providing and fixing gun metal non- return valve of approved quality(screwed end) : 25 mm nominal bore Vertical |
| 26 | Providing and fixing C.P. brass bib cock of approved quality conformingto IS:8931 : 15 mm nominal bore |
| 27 | Providing,laying, testing &commissioning of \\"C' class heavy duty MS Pipe conforming to IS 3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports.anticorrosive treatmentwith coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes completeas required.(Make-Nezone/Jindal/Tata)150 mm dia |
| 28 | Providing, laying, testing &commissioning of 'B' class heavy duty M.S. Pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling/concrete block with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required.25MM |
| 29 | 100 MM |
| 30 | 150MM |
| 31 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze / gunmetal seat duly IS marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required. (Make-Zolota/Sant/Audco)65 MM |
| 32 | 80 MM |
| 33 | 100 MM |
| 34 | 150 MM |
| 35 | Supplying, fixing, testing and commissioning of Non-return valve of following sizesconfirming 4 to IS:5312 complete with rubber gasket, Glbolts, nuts, washers etc. as required. (Make-Zoloto/Sant/Audco)80 mm |
| 36 | 100 mm |
| 37 | 150 mm |
| 38 | 200 mm |
| 39 | Providing, installation, testing and commissioning of C.I. BODY Foot Valve /Y- strainera)200 mm dia |
| 40 | Supplying and fixing single headed internal hydrant valve with instantaneous Stainless steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type- A) with blank PVC cap and chain asrequired.(Make-ESSEL/Newage/Swati) |
| 41 | Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank PVC cap and chain as required.(Make-ESSEL/Newage/Swati) |
| 42 | Supplying and fixing 63mm dia, 15 m long RRL hose pipe with 63mm dia Stainless Steel male and female couplings duly bound with Gl wire, rivets etc. conforming to IS 636 (type-A)as required. (Make-Newage/CRC) |
| 43 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the folloeing as required.20mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipments on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. pipe and socket. (Firestop/ Swati/Newage)a)30 mm dia |
| 44 | Supplying & fixing 63mm dia Stainless Steel short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required. (Make- |
| 45 | Supplying and fixing of fire brigade confection cast iron body with Stainless Steel male instaneous inlet couplings coplete with cap and chain as required for suitable dia MS pipe connection conforming to IS 904 as required. (Make-ESSEL/Newage/Swati)4 way - 150 mm dia M.S. Pipe |
| 46 | 2 way - 150 mm dia M.S. Pipe |
| 47 | Providing & fixing of pressure switch inM.S. pipe line including connection etc. as required. (Make-Indofoss) |
| 48 | Providing & fixing flow switch in followingsizes M.S. pipe includingconnection etc as required.80 mm dia |
| 49 | 150 mm dia |
| 50 | Providing, fixing testing & commissioning of installation control valve of cast iron body, brass / bronze working parts comprising of water motor alarm, bronze seat clapper,clapperarm andhydraulically driven nechanical gong bell to sound continuous alarm when the wet riser/sprinklersystem activates,pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and btpass,test control box, ball valves, MS pipe off required size, flanges, orifice plate, gasket ete of following sizes as required. (Make-HD Fire)150 mm dia |
| 51 | Providing,fixing,testing& commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories.(HD/Unique)Pendent Sprinkler |
| 52 | Horizontal side wall sprinkler |
| 53 | Providing.fixing, testing& commissioning of Rigid Dropping or flexi drop of sprinkler below false ceilling. |
| 54 | Providing, fixing testing &commissioning of adjustable Roset plate |
| 55 | Testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required Servicing, repairing, alirtment .commissioning and automatic operation of Electric driven Main and Sprinkler Fire |
| 56 | Servicing, repairingalirtment coramissioning and automatic operation of Stand by Diesel engine driven mainFire Pump |
| 57 | Servicing, repairing alirtmentcommissioning and automatic operation of electric driven pressurisation Jockey pump |
| 58 | Servicing • repairing • alirtment ,commissioning and automatic operation of electric driven Trece pump |
| 59 | Servicing, repairing,testingcommissioning of Electrical control panel with automatic on off of all pumps. |
| 60 | Supply and Fixing of Modular Dry Chemical Powder type fire Extinguisher 10Kg capacity complete in all respect.(Make- Firestop / Firend) Please Enable Macros to View BoQ information |
