|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductorsingle core cable etc. as required. |
| 2 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required |
| 3 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 4 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 Amodular switch, connections etc. as required. (For light plugs to be used in non residential buildings). |
| 5 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\" curve including connections, painting etc. as required. |
| 6 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.20mm |
| 7 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.1 module |
| 8 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. |
| 9 | WGPVCSB Circuit/sub-man wiring in PVC conduit: Wiring for circuit/ submain wiring along with earth wire with the following size of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2 x 1.5sq. mm +1 x1.5 sq mm earth wire. |
| 10 | WGPVCSB Circuit/sub-man wiring in PVC conduit: Wiring for circuit/ submain wiring along with earth wire with the following size of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2 x 2.5sq. mm +1 x2.5 sq mm earth wire. |
| 11 | ……do….. But with 2 nos x 4 sq.mm in 19mm dia conduit with 1 no.4 sq.mm. PVC insulated copper conductor earth continuity wire. |
| 12 | ……do….. But with 2 nos x 6 sq.mm in 19mm dia conduit with 1 no.4 sq.mm. PVC insulated copper conductor earth continuity wire. |
| 13 | BRHOLD S/F brass holder : Supplying and fixing brass batten/angle holder including connection etc. as required. |
| 14 | CREB S / F Ceiling rose : Supplying and fixing 3 pin 5amp ceiling rose including connection etc. as required. |
| 15 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (Butwithout MCB/RCCB/Isolator)6 way DB |
| 16 | MCBC S/F C series SP MCB S/F, 5 amp 32 amp rating,240V C series MCB on existing DB complete with connections. |
| 17 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 18 | Supply and fixing of electronic fan regulator dimmer 250/230 watts ISI marked on existing switch board . |
| 19 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. |
| 20 | Erection testing of ceiling fan etc excluding supply of down rod and complete work |
| 21 | S/F of1X 22 watt indoor recess mounting LED Tube Light fitting complete in all respect. CAT AA |
| 22 | Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect. |
| 23 | Supply and fixing of recess mounting round 15 to 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. |
| 24 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 30Watt. to 40 Watt. Confirming to IP 66 protection complete in all respect. |
| 25 | Supply and fixing of decorative 40 to 45 Watt LEDPost top indirect light luminaire having Pressure diecast aluminium body and Clear glass with driver setconfirming to IP 65 and above protection complete inall respect. |
| 26 | Supply and laying of aluminium conductor PVCinsulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.2x10 Sqmm |
| 27 | Supply and laying of aluminium conductor PVCinsulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.4x10 Sqmm |
| 28 | Supply and laying of aluminium conductor PVCinsulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.4x16 Sqmm |
| 29 | Supply & Fixing of 12W LED Bulb ISI Marked Complete in all respect. |
| 30 | Supplying of Exhaust Fan ISI Marked Complete in all Respect. |
| 31 | Supplying of Wall fan complete in all respect. |
| 32 | Supplying of 1.55ton AC Split Hot & Cold AC Complete in all Respect. |
| 33 | Supply & Laying Refrigerent pipe For AC |
| 34 | Supplying of metallic Mount Wall Split AC |
| 35 | Supply & Laying of Voltas Drain Pipe for Ac |
| 36 | Installation & commission of AC Split AC |
| 37 | Supplying of Garden light 10W Reputated make |
| 38 | CCTV Supplying of 16 Port Giga port POE Switch |
| 39 | Supplying of 9 U Rack Complete in all Respect. |
| 40 | Supplying of 16 Channel Network Video Recorder |
| 41 | Supplying of 1 KVA Offline UPS |
| 42 | Supplying of Lazer Projector Sony Make or equivalent Complete in all respect complete in all respect. |
| 43 | Supplying of Motorized Projector Screen complete in all respect. |
| 44 | Supplying of 43' TV Complete in all Respect. |
| 45 | Supplying & Laying of HDMI Cable 10m |
| 46 | Supplying of 4 TB Surveillance HDD |
| 47 | Net Supplying of CAT-6 IO with SMB |
| 48 | Supplying of Wifi Access Point Complete in all Respect. |
| 49 | Supplying of 120 Mixer Amplifier Complete in all Respect. |
| 50 | Supplying of 30 W 2-way bass reflex type Ceiling Mount Pro Speaker |
| 51 | One Time Installation Charges With require acesseriesnstallation, Testing & Commissioning of complete system Make: Integrator |
| 52 | Audio Cables Installation Include following items 1) 2 core audio cable 2) PVC Pipe 3)cable laying 4) PVC Pipe Laying 6) Speaker Installation |
| 53 | StudioMaster XR 100 HCL is a 4 channel UHF Wireless Presentation Kit• 2 handheld,• 1 lapel &• 1 conference wireless microphones. |
| 54 | Supplying of Power Key Card Sensor, High Integration Identification Electricity Collection Key Card Switch |
| 55 | Supplying of AMF Panel Complete in all Respect. Please Enable Macros to View BoQ information |