Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | CIVIL WORK |
| 2 | 15.12.1Dismantling doors, windows and clerestory windows (steel or wood ) shutterincluding chowkhats, architrave, holdfasts etc. complete and stacking within 50metres lead:Of area 3 sq. metres and below |
| 3 | 14.4.1Making the opening in brick masonry including dismantling in floor or wallsFor door/ window / clerestory window |
| 4 | OD389248/2025-2026Removing existing wooden cornice / beading of about 40 mm width fixed towall/ceiling, including carefully prying out nails/screws, taking down all sectionswithout undue damage to adjoining surfaces, stacking serviceable material within 50m lead and disposing of unserviceable material, complete as directed byEngineerinCharge. |
| 5 | 15.41Dismantling cement asbestos or other hard board ceiling or partition walls includingstacking of serviceable materials and disposal of unserviceable materials within 50metres lead. |
| 6 | 15.57Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and falseceiling including disposal of unserviceable material and stacking of serviceablematerial with in 50 metres lead as directed by Engineer - in-Charge |
| 7 | OD389293/2025-2026Dismantling of sanitary fittings such as Water closet, wash basin,Heater etc. completeas per the direction of the Engineer-in-charge. |
| 8 | OD389292/2025-2026Dismantling of bathroom fittings such as Health faucet,bibcock,Towel rod,showeretc. complete as per the direction of the Engineer-in-charge. |
| 9 | OD389291/2025-2026Dismantling of existing pvc pipes and fittings up to 110mm dia. complete as per thedirection of the Engineer-in-charge. |
| 10 | OD389290/2025-2026Removing existing built in wooden wardrobe and table including shutters, frame,shelves, fittings, stacking serviceable material and disposing unserviceable materialwithin 50 m lead, complete |
| 11 | 15.10.2Dismantling dressed stone work ashlar face stone work, marble work or precastconcrete work manually / by mechanical means including stacking of serviceable anddisposal of unserviceable material within 50 metres lead as per direction of Engineerin-Charge:In cement mortar |
| 12 | 15.23.1Dismantling tile work in floors and roofs laid in cement mortar including stackingmaterial within 50 metres lead.For thickness of tiles 10 mm to 25 mm |
| 13 | 15.2.2Demolishing cement concrete manually / by mechanical means including disposal ofmaterial within 50 metres lead as per direction of Engineer - in-Charge.Nominalconcrete 1:4:8 or leaner mix ( including equivalent design mix) |
| 14 | OD389321/2025-2026Taking out and removing all loose filling materials like brick bats, broken tiles, brickpieces, sand, aggregates etc. from sunken floor/toilet area disposing of all debriswithin 50 m lead, complete as directed by EngineerinCharge. complete as per thedirection of the Engineer-in-charge. |
| 15 | 15.7.4Demolishing brick work manually / by mechanical means including stacking ofserviceable material and disposal of unserviceable material within 50 metres lead asper direction of Engineer-in-Charge.In cement mortar |
| 16 | 13.88Removing white or colour wash by scrapping and sand papering and preparing thesurface smooth including necessary repairs to scratches etc. complete. |
| 17 | 14.1.1Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters andunder, including cutting the patch in proper shape, raking out joints and preparing andplastering the surface of the walls complete, including disposal of rubbish to thedumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : finesand) |
| 18 | 15.3Demolishing R.C.C. work manually / by mechanical means including stacking ofsteel bars and disposal of unserviceable material with in 50 metres lead as perdirection of Engineer -in-Charge. |
| 19 | 5.33.2.1Providing and laying in position ready mixed or site batched design mix cementconcrete for reinforced cement concrete work; using coarse aggregate and fineaggregate derived from natural sources, Portland Pozzolana / Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 toaccelerate / retard setting of concrete, to improve durability and workability withoutimpairing strength; including pumping of concrete to site of laying, curing, carriagefor all leads; but excluding the cost of centering, shuttering, finishing andreinforcement as per direction of the engineer-in-charge; for the following grades ofconcrete. Note: Extra cement up to 10% of the minimum specified cement content indesign mix shall be payable separately. In case the cement content in design mix ismore than 110% of the specified minimum cement content, the contractor shall havediscretion to either re-design the mix or bear the cost of extra cementAll work above plinth level upto floor V levelConcrete of M25 grade with minimumcement content of 330 kg /cum |
| 20 | 5.9.5Centering and shuttering including strutting, etc. and removal of form for:Lintels,beams, plinth beams, girders bressumers and cantilevers |
| 21 | 22.5Providing and laying water proofing treatment in sunken portion of WCs, bathroometc., by applying cement slurry mixed with water proofing cement compoundconsisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed withwater proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to aircure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed withwater proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to aircure for 4 hours followed with water curing for 48 hours. The rate includespreparation of surface, treatment and sealing of all joints, corners, junctions of pipesand masonry with polymer mixed slurry. |
| 22 | 6.47Providing and laying Autoclaved Aerated concrete (AAC) blocks masonry150mm/230mm/300 mm thick with Grade- I AAC blocks in super structureabove plinth level up to floor V level with RCC band at sill level and lintellevel with approved block laying polymer modified adhesive mortar allcomplete as per direction of Engineer-in-Charge. (The payment of RCC bandand reinforcement shall be made for seperately). |
| 23 | 26.30.1Drilling suitable holes in reinforced or plain cement concrete with power drivendrill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels,columns and slabs to introduce steel bars for sunshades/balconies includingfixing the steel bars in position using epoxy resin anchor grout of approvedmake but excluding the cost of reinforcement, all complete as per direction ofEngineer-In-Charge.Upto and including 12mm dia. |
| 24 | OD389353/2025-2026Providing and filling M sand in sunken portion of toilets including carriage, labouretc complete |
| 25 | 4.1.8Providing and laying in position cement concrete of specified grade excluding thecost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mmnominal size derived from natural sources) |
| 26 | 11.41.3Providing and laying vitrified floor tiles in different sizes (thickness to be specified bythe manufacturer) with water absorption less than 0.08% and conforming to IS :15622, of approved make, in all colours and shades, laid on 20 mm thick cementmortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cementand matching pigments etc., complete.Size of Tile 800x 800 mm |
| 27 | 11.48.3Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy groutmix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kgof resin per kg). including filling /grouting and finishing complete as per direction ofEngineer-in-charge.Size of Tile 800x800mm |
| 28 | 11.49.3Providing and laying Vitrified tiles in floor with different sizes (thickness to bespecified by the manufacturer), with water absorption less than 0.08% andconforming to IS : 15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (waterbased) conforming to IS : 15477, in average 6 mm thickness, including grouting ofjoints (Payment for grouting of joints to be made separately).Size of Tile 800x800mm |
| 29 | 11.46.3Providing and laying Vitrified tiles indifferent sizes (thickness to be specified bymanufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622,of approved make, in all colours & shade, in skirting, riser of steps, over 12 mmthick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting thejoint with white cement & matching pigments etc. complete.Size of Tile 800 x800 mm |
| 30 | 8.2.2.2Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded andprepolished, machine cut for kitchen platforms, vanity counters, window sills, faciasand similar locations, of required size, approved shade, colour and texture laid over20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated withwhite cement, mixed with matching pigment, epoxy touch ups, including rubbing,curing, moulding and polishing to edges to give high gloss finish etc. complete at alllevels.Area of slab over 0.50 sqm |
| 31 | 8.3.2Providing edge moulding to 18 mm thick marble stone counters, vanities etc.,including machine polishing to edge to give high gloss finish etc. complete as perdesign approved by Engineer -in-Charge.Granite work |
| 32 | 8.4Extra for fixing marble/ granite stone, over and above corresponding basic item, infacia and drops of width upto 150 mm with epoxy resin based adhesive, includingcleaning etc. complete. |
| 33 | 8.5Extra for providing opening or required size & shape for wash basin/kitchen sinkin kitchen platform, vanity counter and similar location in marble/granite/ stone work,including necessary holes for pillar taps etc. including moulding, rubbing andpolishing of cut edges etc. complete. |
| 34 | 2.25Filling available excavated earth (excluding rock) in trenches, plinth, sides offoundation etc. in layers not exceeding 20 cm in depth, consolidating each depositedlayer by ramming and watering, lead up to 50 m and lift up to 1.5 m. |
| 35 | 2.6.1Earth work in excavation by mechanical means (Hydraulic excavator)/manual meansover areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan)including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in-charge.All kinds of soil |
| 36 | 5.9.1Centering and shuttering including strutting, etc. and removal of formfor:Foundations, footings, bases of columns, etc for mass concrete |
| 37 | 5.9.2Centering and shuttering including strutting, etc. and removal of form for:Walls (anythickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 38 | 5.9.3Centering and shuttering including strutting, etc. and removal of form for:Suspendedfloors, roofs, landings, balconies and access platform |
| 39 | 5.33.1.1Providing and laying in position ready mixed or site batched design mix cementconcrete for reinforced cement concrete work; using coarse aggregate and fineaggregate derived from natural sources, Portland Pozzolana / Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 toaccelerate / retard setting of concrete, to improve durability and workability withoutimpairing strength; including pumping of concrete to site of laying, curing, carriagefor all leads; but excluding the cost of centering, shuttering, finishing andreinforcement as per direction of the engineer-in-charge; for the following grades ofconcrete. Note: Extra cement up to 10% of the minimum specified cement content indesign mix shall be payable separately. In case the cement content in design mix ismore than 110% of the specified minimum cement content, the contractor shall havediscretion to either re-design the mix or bear the cost of extra cementAll work upto plinth levelConcrete of M25 grade with minimum cement content of330 kg /cum |
| 40 | 13.52.2Finishing with Epoxy paint (two or more coats) at all locations prepared and appliedas per manufacturer's specifications including appropriate priming coat,preparation of surface, etc. complete.On concrete work |
| 41 | 5.22.6Steel reinforcement for R.C.C work including straightening, cutting, bending, placingin position and binding all complete upto plinth levelThermo - Mechanically Treatedbars of grade Fe-500D or more |
| 42 | 13.1.112 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 43 | 13.80Providing and applying white cement based putty of average thickness 1 mm, ofapproved brand and manufacturer, over the plastered wall surface to prepare thesurface even and smooth complete. |
| 44 | 13.43.1Applying one coat of water thinnable cement primer of approved brand andmanufacture on wall surface:Water thinnable cement primer |
| 45 | 13.83.2Wall painting with premium acrylic emulsion paint of interior grade, having VOC(Volatile including applying additional coats wherever required to achieve even shadeand colour.Two coats |
| 46 | 21.18Providing and fixing 12 mm thick frameless toughened glass door shutter of approvedbrand and manufacture, including providing and fixing top & bottom pivot& double acting hydraulic floor spring type fixing arrangement and makingnecessary holes etc. for fixing required door fittings, all complete as per direction ofEngineer-in-charge ( Door handle, lock and stopper etc to be paid separately) |
| 47 | 21.3.2Providing and fixing glazing in aluminium door, window, ventilator shutters andpartitions etc. with EPDM rubber / neoprene gasket etc. complete as per thearchitectural drawings and the directions of Engineer - in -Charge. ( Cost ofaluminium snap beading shall be paid in basic item):With float glass panes of 5.50mm thickness (weight not less than 12.50 kg/sqm) |
| 48 | OD389377/2025-2026Providing and fixing pre hung doors with hardwood/UPVC/WPC frame and solidcore flush door of 210 x 100 x 40 mm flush doors with laminates on both sides andPVC lipping on four sides. |
| 49 | 9.147A.1Providing and fixing factory made uPVC white colour casement/casement cumfixed glazed windows comprising of uPVC multi-chambered frame, sash andmullion (where ever required) extruded profiles duly reinforced with 1.60 +/-0.2mm thick galvanized mild steel section made from roll forming process of requiredlength (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) frictionhinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps andnecessary stainless steel screws etc. Profile of frame & sash shall be mitred cutand fusion welded at all corners, mullion (if required) shall be also fusion weldedincluding drilling of holes for fixing hardware's and drainage of water etc. Afterfixing frame the gap between frame and adjacent finished wall shall be filled withweather proof silicon sealant over backer rod of required size and of approvedquality, all complete as per approved drawing & direction of Engineer-in-Charge.(Single / double glass panes and silicon sealant shall be paid separately)Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Casement windowsingle panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series)frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 +/- 0.2mm and single glass pane glazing bead of appropriate dimension. (Area of windowupto 0.75 sqm.) |
| 50 | 9.147A.2Providing and fixing factory made uPVC white colour casement/casement cumfixed glazed windows comprising of uPVC multi-chambered frame, sash andmullion (where ever required) extruded profiles duly reinforced with 1.60 +/-0.2mm thick galvanized mild steel section made from roll forming process of requiredlength (shape & size according to uPVC profile), uPVC extruded glazing beads ofappropriate dimension, EPDM gasket, stainless steel (SS 304 grade) frictionhinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps andnecessary stainless steel screws etc. Profile of frame & sash shall be mitred cutand fusion welded at all corners, mullion (if required) shall be also fusion weldedincluding drilling of holes for fixing hardware's and drainage of water etc. Afterfixing frame the gap between frame and adjacent finished wall shall be filled withweather proof silicon sealant over backer rod of required size and of approvedquality, all complete as per approved drawing & direction of Engineer-in-Charge.(Single / double glass panes and silicon sealant shall be paid separately)Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Casement windowdouble panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series)frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wallthickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension.(Area of window above 0.75 sqm upto 1.50 sqm). |
| 51 | 9.147A.5Providing and fixing factory made uPVC white colour casement/casement cumfixed glazed windows comprising of uPVC multi-chambered frame, sash andmullion (where ever required) extruded profiles duly reinforced with 1.60 +/-0.2mm thick galvanized mild steel section made from roll forming process of requiredlength (shape & size according to uPVC profile), uPVC extruded glazing beads ofappropriate dimension, EPDM gasket, stainless steel (SS 304 grade) frictionhinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps andnecessary stainless steel screws etc. Profile of frame & sash shall be mitred cutand fusion welded at all corners, mullion (if required) shall be also fusion weldedincluding drilling of holes for fixing hardware's and drainage of water etc. Afterfixing frame the gap between frame and adjacent finished wall shall be filled withweather proof silicon sealant over backer rod of required size and of approvedquality, all complete as per approved drawing & direction of Engineer-in-Charge.(Single / double glass panes and silicon sealant shall be paid separately)Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Casement windowdouble panels with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series)frame67 x 60 mm & sash / mullion 67 x 80 mm both having wall thickness of 2.3± 0.2 mm and single glazing bead/ double glazing bead of appropriatedimension. (Area of window above 1.50 sqm). |
| 52 | OD389785/2025-2026Supply and installation of superior quality mirror glass of size 61 cm × 195 cm,provided with 19 mm mirror caps and necessary holes for fixing, including all fittingsand accessories, complete as required. |
| 53 | OD389786/2025-2026Supplying premium quality main curtain cloth and sheer curtain cloth of approvedmake, colour and design, stitching, pleating and fixing the same for windows ofrequired size, including stitching and fitting charges, necessary hooks, rings andaccessories, and providing and fixing curtain rod with brackets, finials, screws andwall plugs, complete as required. |
| 54 | OD389787/2025-2026Hiring for Carpenter for repair of existing wooden door shutter work etc complete asper the direction of engineer in charge |
| 55 | OD389788/2025-2026Hiring for general labour for carrying out extra work and patch works etc complete asperthe direction of engineer in charge |
| 56 | 13.110.1Finishing walls with textured exterior paint of required shade :Old work (Two ormore coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. |
| 57 | FURNITURE |
| 58 | OD390471/2025-2026Providing and fixing charcoal wall panels to wall with approved fasteners andadhesive, including matching trims/beading, cutting and finishing, complete as per manufacturers instructions and direction of Engineer-in-Charge. |
| 59 | OD390472/2025-2026Providing and fixing wall moulding and WPC edge beading of approved design andsize, fixed to wall with suitable adhesive and/or fasteners, including necessarycutting, jointing, finishing, surface preparation and all accessories, complete as perdrawings and as directed by the Engineer-in-Charge. |
| 60 | 12.45.3Providing and fixing false ceiling at all height including providing and fixing of framework made of special sections, power pressed from M.S. sheets and galvanized withzinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting ofangle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mmdia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangersof 25x10x0.50 mm of required length with nuts & bolts of required size andother end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mmrunning at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular toG.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mmlong G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed towall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wallscrews @ 230 mm interval, including fixing of gypsum board to ceiling section andperimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c,including jointing and finishing to a flush finish of tapered and square edges of theboard with recommended jointing compound, jointing tapes, finishing with jointingcompound in 3 layers covering upto 150 mm on both sides of joint and two coats ofprimer suitable for board, all as per manufacturer's specification and alsoincluding the cost of making openings for light fittings, grills, diffusers, cutouts madewith frame of perimeter channels suitably fixed, all complete as per drawings,specification and direction of the Engineer in Charge but excluding the cost ofpainting with:12.5 mm thick tapered edge gypsum moisture resistant board |
| 61 | OD390475/2025-2026Supplying and placing king size bed base 78/72 inch with bed back headrest ofrequired size in rooms, fabricated from plywood and laminate finished of approvedmake and shade, necessary supports, fasteners and all incidental materials, completeas per drawing and direction of Engineer in Charge. |
| 62 | OD390476/2025-2026Supplying and placing Single bed cot 80/38 inch with bed back headrest of requiredsize in rooms, fabricated from plywood and laminate finished of approved make andshade, necessary supports, fasteners and all incidental materials, complete as perdrawing and direction of Engineer in Charge. |
| 63 | OD390477/2025-2026Supplying and placing side table of required size in rooms, fabricated from plywoodand exposed faces finished with 3 mm laminated finish of approved make and shade,necessary supports, fasteners and all incidental materials,complete as per drawing anddirection of EngineerinCharge. |
| 64 | OD390478/2025-2026Supplying and placing study table of required size in rooms, fabricated from plywoodand exposed faces finished with laminated finish of approved make and shade,necessary supports, fasteners and all incidental materials, complete as per drawingand direction of EngineerinCharge. |
| 65 | OD390479/2025-2026Supplying and placing study chair of required size in rooms, necessary supports,fasteners and all incidental materials , complete as per drawing and direction ofEngineerinCharge. |
| 66 | OD390480/2025-2026Supplying and placing laguage rack of required size in rooms, fabricated fromplywood and exposed faces finished with 3 mm thick decorative laminated finish ofapproved make and shade, polishing of veneer to approved finish, necessary supports,fasteners and all incidental materials, complete as per drawing and direction ofEngineerinCharge. |
| 67 | OD390481/2025-2026Supplying and placing wardrobe of size 3.0 m × 2.1 m, fabricated from plywood ofapproved grade and thickness, with exposed faces finished with laminated finish ofapproved make and shade, including necessary internal partitions, shelves, supports,hardware, fasteners and all incidental materials, complete as per drawings anddirection of the Engineer-in-Charge. |
| 68 | OD390482/2025-2026Supplying and placing wardrobe of size 2.4 m × 2.1 m, fabricated from plywood ofapproved grade and thickness, with exposed faces finished with laminated finish ofapproved make and shade, including necessary internal partitions, shelves, supports,hardware, fasteners and all incidental materials, complete as per drawings anddirection of the Engineer-in-Charge. |
| 69 | OD390614/2025-2026Supply and placing of King size mattress 78/72/8 inch make duroflex (posture perfectpocket spring Orthopedic mattress) |
| 70 | OD390613/2025-2026Supplying and placing master chair of full fabric with wooden legs required size inrooms, necessary supports, fasteners and all incidental materials , complete as perdrawing and direction of Engineer in Charge. |
| 71 | OD390617/2025-2026Supply and placing Single size 80/38/8 inch mattress make duroflex (posture perfectpocket spring Orthopedic mattress) |
| 72 | OD390619/2025-2026Supply and placing of Tea poy with wooden legs required size in rooms, necessarysupports, fasteners and all incidental materials , complete as per drawing anddirection of Engineer in Charge. |
| 73 | SANITARY AND WATER SUPPLY |
| 74 | OD389567/2025-2026Supplying and fixing rimless back to wall WC suite with UF (urea Formaldehyde)soft close seat cover and Ptrap 180 mm, including all fixing accessories, connection toflush system and testing, complete as directed by Engineer in Charge. (Make: JaquarArtize, Cat. No. CFSWHT 69955P180UF or equivalent). |
| 75 | OD389608/2025-2026Supplying and fixing hand shower (health faucet) with 8 mm diameter flexible tube of1 metre length and wall hook, including fixing hardware, testing and commissioning,complete as directed by Engineer in Charge. |
| 76 | OD389611/2025-2026Supplying and fixing angular stop cock with wall flange for wall mounting, includinginlet connection, testing and commissioning, complete as directed by Engineer inCharge. (Make: Jaquar, Cat. No. KUPGMP35053PM or equivalent). |
| 77 | OD389613/2025-2026Supplying and fixing pneumatic single piece slim concealed cistern with floormounting frame, installation kit and "Ptype" drain pipe connection set forwall hung WC, including all fixtures and testing, complete as directed by Engineer inCharge. (Make: Jaquar Artize, Cat. No. APC WHT 5012500FP or equivalent). |
| 78 | OD389615/2025-2026Supplying and fixing cilica pneumatic white glass control plate for concealed cistern,including fixing hardware and testing, complete as directed by Engineer in Charge.(Make: Jaquar Artize, Cat. No. ACP GBP 5012501 or equivalent). |
| 79 | OD389617/2025-2026Supplying and fixing universal rain shower head of size 350 × 350 mm withfixing hardware, including connection to water supply and testing, complete asdirected by Engineer in Charge. (Make: Villeroy & Boch, Cat. No.TVC00000600076 or equivalent). |
| 80 | OD389637/2025-2026Supplying and fixing rain shower arm of size 350 × 350 mm for wallmounting, including all fixing accessories and connection to shower head, completeas directed by Engineer in Charge. (Make: Villeroy & Boch, Cat. No.TVC00045453076 or equivalent). |
| 81 | OD389641/2025-2026Supplying and fixing universal concealed installation unit (Vi Box) for single levermixer, including rough in assembly, brackets and fixing hardware, complete asdirected by Engineer in Charge. (Make: Villeroy & Boch, Cat. No.TVS00035100000 or equivalent). |
| 82 | OD389647/2025-2026Supplying and fixing architectura square concealed single lever bath/shower mixer ofsize 150 × 190 mm, including fixing hardware, connection to water supply andtesting, complete as directed by Engineer in Charge. (Make: Villeroy & Boch,Cat. No. TVS12500300076 or equivalent). |
| 83 | OD389652/2025-2026Supplying and fixing architectura square bath spout of 234 mm length for wallmounting, including all fixing accessories and connection to water supply, completeas directed by Engineer in Charge. (Make: Villeroy & Boch, Cat. No.TVT12500200076 or equivalent). |
| 84 | OD389664/2025-2026Providing and fixing 75423IN-CP_KOHLER_FLOORDRAINER Description-ColourFinish:ChromeLarge-volumeHiddenFloorDrain |
| 85 | OD389665/2025-2026Providing and fixing COMPLEMENTARY-25074IN-CP_KOHLER_TUMBLERHOLDERDescription-COMPLEMENTARYSquare tumblerholder inpolishedchrome |
| 86 | OD389667/2025-2026Supplying and fixing COMPLEMENTARY-5636IN-CP_KOHLER_ GLASSSHELF Description-COMPLEMENTARY Glass shelf in polished chrome |
| 87 | OD389668/2025-2026providing and fixing K-1572223 KOHLER_CONNECTORDescription-Drain connector assyOW including waste coupling |
| 88 | OD390296/2025-2026Supplying and fixing COMPLEMENTARY-5634IN-CP_KOHLER_ SOAPDISHDescription-COMPLEMENTARY soap dish in polished chrome, including cost ofmaterials and labour charges etc complete as per the direction of site Engineer-incharge. |
| 89 | OD390298/2025-2026Supplying and fixing COMPLEMENTARY-25066IN-CP_KOHLER_TOWELSHELF Description-COMPLEMENTARYTowel shelf in polished chromeincluding cost of materials and labour charges etc complete as per the direction of siteEngineer-in-charge. |
| 90 | OD390304/2025-2026Supplying and fixing the CRUZ-10712D-CP_KOHLER_SOAP DISPENSERDescription-CRUZSoapdispenserandholder with frosted glass bottle in polishedchrome, including cost of materials and labour charges etc complete as per thedirection of site Engineer-in-charge. |
| 91 | OD390315/2025-2026Supplying and fixing COMPLEMENTARY-25065IN-CP_KOHLER _TOWEL RODDescription-COMPLEMENTARYSquare 610mmsingletowelbar inpolishedchromeincluding cost of materials and labour charges etc complete as per the direction of siteEngineer-in- charge. |
| 92 | OD390317/2025-2026Supplying and fixing counter wash basin (Venticello model) of size 555 × 360× 110 mm with overflow, white alpin finish, including fixing hardware andconnection to water supply and drainage, complete as directed by Engineer in Charge.(Make: Villeroy & Boch, Cat. No. 41135501 or equivalent). |
| 93 | OD390319/2025-2026Supplying and fixing architectura square tall single lever basin mixer with push openwaste in brushed gold finish, including fixing hardware and connection to watersupply and drainage, complete as directed by Engineer in Charge. (Make: Villeroy& Boch, Cat. No. TVW12500200076 or equivalent). |
| 94 | OD390322/2025-2026Supplying and fixing angle valve for wall mounted application in chrome finish,including fixing hardware and connection to water supply, complete as directed byEngineer in Charge. (Make: Villeroy & Boch, Cat. No. TVC00000500261 orequivalent). |
| 95 | OD390334/2025-2026Providing and fixing CP brass overhead shower with arm, make CERA Cat. No.F7020104AB or equivalent, 70 mm dia, round, chrome plated, with 15 mm showerarm and all necessary CP brass fittings, cutting and making good the wall, completeas per direction of Engineer in Charge. |
| 96 | OD390335/2025-2026Providing and fixing vitreous china counter/table top wash basin, make CERA Cat.No. S2030125SN (CLIFF) or equivalent, size approx. 550 × 460 × 185 mm, snowwhite shade, including CP brass waste coupling, bottle trap and all fittings, cuttingand making good the counter slab, complete as per direction of Engineer in Charge. |
| 97 | OD390345/2025-2026Providing and fixing CP brass waste coupling, make CERA Cat. No. F8050101CH orequivalent, full thread, size about 77 × 62 mm, with rubber washer and jointingmaterials, suitable for wash basin/counter basin, complete as per direction of Engineerin Charge. |
| 98 | OD390346/2025-2026Providing and fixing CP brass angular stop cock, make CERA Cat. No. F1015201CH(VICTOR) or equivalent, 15 mm nominal bore, including all CP brass nuts, nipples,union and wall flange, complete as per direction of Engineer in Charge. |
| 99 | OD390347/2025-2026Providing and fixing CP brass angular stop cock, make CERA Cat. No. F1003201CH(TITANIUM) or equivalent, 15 mm nominal bore, including all CP brass nuts,nipples, union and wall flange, complete as per direction of Engineer in Charge. |
| 100 | OD390357/2025-2026Providing and fixing single lever CP brass basin mixer, make CERA Cat. No.F2002461CH (GARNET central hole basin mixer) or equivalent, with braidedconnection hoses and all required fittings for wash basin, including testing andmaking good the wall/counter, complete as per direction of Engineer in Charge. |
| 101 | OD390358/2025-2026Providing and fixing CP brass wall mixer with long bend pipe for overhead shower,make CERA Cat. No. F1003401CH (TITANIUM WM) or equivalent, including wall flanges and necessary CP brass fittings, complete as per direction of Engineer inCharge. |
| 102 | OD390368/2025-2026Providing and fixing stainless steel paper holder with flap, make CERA Cat. No.F5002110SS (MONTANA) or equivalent, wall mounted, including SS/CP screws andplastic plugs, complete as per direction of Engineer in Charge. |
| 103 | OD390369/2025-2026Providing and fixing stainless steel tumbler holder, make CERA Cat. No.F5002107SS (MONTANA) or equivalent, wall mounted, including SS/CP screws andplastic plugs, complete as per direction of Engineer in Charge. |
| 104 | OD390370/2025-2026Providing and fixing vitreous china one piece EWC, make CERA Cat. No.S1013163SN (CIMBA 225 mm) or equivalent, floor mounted, snow white colour,S/Ptrap as required, with soft closing seat and cover, complete with necessary CPbrass fittings and connection to flush line and soil pipe, making good the floor andwall, as per direction of Engineer in Charge. |
| 105 | OD390371/2025-2026Providing and fixing health faucet (hand spray) with SS flexible hose and wall hook,make CERA Cat. No. F8030106AB or equivalent, including 15 mm CP brass anglevalve and all accessories, complete as per direction of Engineer in Charge. |
| 106 | OD390372/2025-2026Providing and fixing CP brass towel rack 600 mm (24") with hooks, makeCERA Cat. No. F5014131CH (ICON) or equivalent, wall mounted, including CPbrass screws and plastic plugs, complete as per direction of Engineer in Charge. |
| 107 | OD390373/2025-2026Providing and fixing stainless steel soap dish, make CERA Cat. No. F5003106SS(ORMOND) or equivalent, wall mounted, including SS/CP screws and plugs,complete as per direction of Engineer in Charge. |
| 108 | OD390374/2025-2026Providing and fixing stainless steel robe hook, make CERA Cat. No. F5003108SS(ORMOND) or equivalent, wall mounted, including SS/CP screws and plugs,complete as per direction of Engineer in Charge. |
| 109 | OD390382/2025-2026Providing and fixing floor trap with cockroach trap (multi trap), concealed or exposed, SS304 grade floor grating with cup inclu ding cost and conveyance of allmaterials, labour charges, sundries etc complete as directed by the directed by theEngineer-in-Charge at all levels |
| 110 | OD390376/2025-2026Providing and fixing Bottle trap make cera F8060401 or equivalent bottle trap of300 mm all accessories, complete as per direction of Engineer in Charge. |
| 111 | OD390378/2025-2026Providing and fixing of Flexible hose make cera F8070401 or equivalent 1.5 metreflexible stainless steel hose all accessories, complete as per direction of Engineer inCharge. |
| 112 | OD390380/2025-2026Providing and fixing of soap dispenser make cera F5001111CH or equivalent LiquidSoap Dispenser Chrome accessories, complete as per direction of Engineer in Charge. |
| 113 | 18.8.1Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply, including all CPVC plain & brassthreaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includesjointing of pipes& fittings, with one step CPVC solvent cement and the cost ofcutting chases and making good the same including testing of joints complete as perdirection of Engineer-in-Charge. Concealed work, including cutting chases andmaking good the wall etc.15 mm nominal dia pipes |
| 114 | 18.8.2Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply, including all CPVC plain & brassthreaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includesjointing of pipes& fittings, with one step CPVC solvent cement and the cost ofcutting chases and making good the same including testing of joints complete as perdirection of Engineer-in-Charge. Concealed work, including cutting chases andmaking good the wall etc.20 mm nominal dia pipes |
| 115 | 18.8.3Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply, including all CPVC plain & brassthreaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includesjointing of pipes& fittings, with one step CPVC solvent cement and the cost ofcutting chases and making good the same including testing of joints complete as perdirection of Engineer-in-Charge. Concealed work, including cutting chases andmaking good the wall etc.25 mm nominal dia pipes |
| 116 | 18.8.4Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply, including all CPVC plain & brassthreaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includesjointing of pipes& fittings, with one step CPVC solvent cement and the cost ofcutting chases and making good the same including testing of joints complete as perdirection of Engineer-in-Charge. Concealed work, including cutting chases andmaking good the wall etc.32 mm nominal dia pipes |
| 117 | 50.18.9.21Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes,including jointing with PVC solvent cement - 75 mm dia Elbow |
| 118 | 50.18.9.21.3Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes,including jointing with PVC solvent cement -75 mm dia Door Elbow |
| 119 | 50.18.9.22.1Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,including jointing with PVC solvent cement - 110 mm dia Elbow |
| 120 | 50.18.9.22.3Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,including jointing with PVC solvent cement-110 mm dia Door Elbow |
| 121 | 50.18.9.18.1Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 mspacing. This included jointing of pipes with one step PVC solvent cement and testingof joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 -External work- Exposed on wall |
| 122 | 50.18.9.17.1Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 mspacing . This includes jointing of pipes with one step PVC solvent cement andtesting of joints complete as per direction of Engineer-in-Charge 63 mm dia 6Kgf/cm2 - External work - Exposed on wall |
| 123 | 18.7.6Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply, including all CPVC plain & brassthreaded fittings including fixing the pipe with clamps at 1.00 m spacing. Thisincludes jointing of pipes & fittings with one step CPVC solvent cement andtesting of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall50 mm nominal dia pipes |
| 124 | 18.7.3Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply, including all CPVC plain & brassthreaded fittings including fixing the pipe with clamps at 1.00 m spacing. Thisincludes jointing of pipes & fittings with one step CPVC solvent cement andtesting of joints complete as per direction of Engineer -in-Charge. Internal work -Exposed on wall25 mm nominal dia pipes |
| 125 | 18.7.2Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply, including all CPVC plain & brassthreaded fittings including fixing the pipe with clamps at 1.00 m spacing. Thisincludes jointing of pipes & fittings with one step CPVC solvent cement andtesting of joints complete as per direction of Engineer -in-Charge. Internal work -Exposed on wall20 mm nominal dia pipes |
| 126 | 18.7.1Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply, including all CPVC plain & brassthreaded fittings including fixing the pipe with clamps at 1.00 m spacing. Thisincludes jointing of pipes & fittings with one step CPVC solvent cement andtesting of joints complete as per direction of Engineer -in-Charge. Internal work -Exposed on wall15 mm nominal dia pipes |
| 127 | 50.18.9.19.1Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00m spacing . This includes jointing of pipes with one step PVC solvent cement andtesting of joints complete as per direction of Engineer-in-Charge 110 mm dia 6Kgf/cm2 - External work- Exposed on wall |
| 128 | 50.18.9.16.1Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solventcement and testing of joints complete as per direction of Engineer-in-Charge 50 mmdia 10Kgf/cm2 - External work - Exposed on wall |
| 129 | 50.18.9.21.4Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,including jointing with PVC solvent cement - 75 mm dia Bend |
| 130 | 50.18.9.20.4Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,including jointing with PVC solvent cement - 63 mm dia Bend |
| 131 | 50.18.9.20.10Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes,including jointing with PVC solvent cement - 63x50 mm dia Reducer |
| 132 | 50.18.9.22.4Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,including jointing with PVC solvent cement- 110 mm dia Bend |
| 133 | 50.18.9.20.3Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes,including jointing with PVC solvent cement - 63 mm dia Door Elbow |
| 134 | GENERAL ELECTTRICAL WORK |
| 135 | 1.10.2Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mmFRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVCconduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group B |
| 136 | OD395180/2025-2026Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mmFRLS PVC insulated copper conductor single core cable in surface / recessed mediumclass PVC conduit, with modular premium switch, modular premium plate, suitableGI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductorsingle core cable etc as required.Group BPVC insulated copper conductor single core cable etc as required.Group B |
| 137 | OD395189/2025-2026Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copperconductor single core cable in surface / recessed medium class PVC conduit, 2 waypremium modular switch, premium modular plate, suitable GI box and earthing thepoint with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc asrequired. |
| 138 | 1.55.2 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bellpoint ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copperconductor single core cable in surface/ recessed PVC conduit, and earthing the pointwith 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. asrequired.Group B |
| 139 | 1.14.1Wiring for circuit/ submain wiring alongwith earth wire with the following sizes ofFRLS PVC insulated copper conductor, single core cable in surface / recessedmedium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire |
| 140 | 1.14.2Wiring for circuit/ submain wiring alongwith earth wire with the following sizes ofFRLS PVC insulated copper conductor, single core cable in surface / recessedmedium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 141 | 1.14.3Wiring for circuit/ submain wiring alongwith earth wire with the following sizes ofFRLS PVC insulated copper conductor, single core cable in surface / recessedmedium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 142 | 1.17.3Supplying and drawing following sizes of FRLS PVC insulated copper conductor,single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X1.5 sq.mm |
| 143 | 1.17.12Supplying and drawing following sizes of FRLS PVC insulated copper conductor,single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x2.5 sq. mm |
| 144 | 1.21.1Supplying and fixing of following sizes of medium class PVC conduit along withaccessories in surface/ recess including cutting the wall and making good the same incase of recessed conduit as required.20 mm |
| 145 | 1.21.2Supplying and fixing of following sizes of medium class PVC conduit along withaccessories in surface/ recess including cutting the wall and making good the same incase of recessed conduit as required.25 mm |
| 146 | 1.24.1 Supplying and fixing following modular switch/ socket on the existing modular plate& switch box including connections but excluding modular plate etc. asrequired.5/6 amps switch |
| 147 | OD388527/2025-2026Supplying and fixing following modular switch/ socket on the existing modular plate& switch box including connections but excluding modular plate etc. asrequired.5/6 amps premium switch |
| 148 | 1.24.3Supplying and fixing following modular switch/ socket on the existing modular plate& switch box including connections but excluding modular plate etc. asrequired.15/16 amp switch |
| 149 | OD388529/2025-2026Supplying and fixing following modular switch/ socket on the existing modular plate& switch box including connections but excluding modular plate etc. asrequired.15/16 amp premium switch |
| 150 | 1.24.4Supplying and fixing following modular switch/ socket on the existing modular plate& switch box including connections but excluding modular plate etc. asrequired.3 pin 5/6 amp socket outlet |
| 151 | OD388531/2025-2026Supplying and fixing following modular switch/ socket on the existing modular plate& switch box including connections but excluding modular plate etc. asrequired.3 pin 5/6 amp premium socket outlet |
| 152 | 1.24.5Supplying and fixing following modular switch/ socket on the existing modular plate& switch box including connections but excluding modular plate etc. asrequired.6 pin 15/16 amp socket outlet |
| 153 | OD388532/2025-2026Supplying and fixing following modular switch/ socket on the existing modular plate& switch box including connections but excluding modular plate etc. asrequired.6 pin 15/16 amp premium socket outlet |
| 154 | 1.25Supplying and fixing two module stepped type electronic fan regulator on the existingmodular plate switch box including connections but excluding modular plate etc. as required |
| 155 | OD388534/2025-2026Supplying and fixing two module stepped type electronic premium fan regulator onthe existing modular plate switch box including connections but excluding modularplate etc. as required. |
| 156 | 1.26Supplying and fixing modular blanking plate on the existing modular plate &switch box excluding modular plate as required |
| 157 | OD388535/2025-2026Supplying and fixing modular premium blanking plate on the existing modular plate& switch box excluding modular plate as required. |
| 158 | 1.24.8Supplying and fixing following modular switch/ socket on the existing modular plate& switch box including connections but excluding modular plate etc. asrequired.Bell push |
| 159 | 1.38Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete asrequired. |
| 160 | 90.10.3.15Supply and Fixing the following modular switches & accessories in the existingfront plates and giving necessary connections as required (RoHS compliant )32A DPswitch with indicator |
| 161 | OD389134/2025-2026Supply and Fixing the following modular switches & accessories in the existing frontplates and giving necessary connections as required (RoHS compliant )32A premium DP switch with indicator |
| 162 | 90.10.1.2Supply & Fixing the following types/ sizes of boxes suitable for modularaccessories in surface/ recess including making good the damages, colour washing etcas required (RoHS compliant )2 module moulded plastic box on surface |
| 163 | 90.10.1.3Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )3 module moulded plastic box on surface |
| 164 | 90.10.1.5Supply & Fixing the following types/ sizes of boxes suitable for modularaccessories in surface/ recess including making good the damages, colour washing etcas required (RoHS compliant )6 module moulded plastic box on surface |
| 165 | 1.27.1Supplying and fixing following size/ modules, GI box alongwith modular base &cover plate for modular switches in recess etc as required.1 or 2 Module(75mmX75mm) |
| 166 | 1.27.2Supplying and fixing following size/ modules, GI box alongwith modular base &cover plate for modular switches in recess etc as required.3 Module (100mmX75mm |
| 167 | 1.27.4Supplying and fixing following size/ modules, GI box alongwith modular base &cover plate for modular switches in recess etc as required.6 Module (200mmX75mm) |
| 168 | 1.27.5Supplying and fixing following size/ modules, GI box alongwith modular base &cover plate for modular switches in recess etc as required.8 Module(125mmX125mm) |
| 169 | 1.28.1Supplying and fixing following Modular base & cover plate on existing modularmetal boxes etc. as required.1 or 2 Module |
| 170 | OD389145/2025-2026Supplying and fixing following premium Modular base & cover plate on existingmodular metal boxes etc. as required.1 or 2 Module |
| 171 | 1.28.2Supplying and fixing following Modular base & cover plate on existing modularmetal boxes etc. as required.3 Module |
| 172 | OD389147/2025-2026Supplying and fixing following premium Modular base & cover plate on existingmodular metal boxes etc. as required.3 Module |
| 173 | 1.28.4Supplying and fixing following Modular base & cover plate on existing modularmetal boxes etc. as required.6 Module |
| 174 | OD389152/2025-2026Supplying and fixing following premium Modular base & cover plate on existingmodular metal boxes etc. as required.6 Module |
| 175 | 1.28.5Supplying and fixing following Modular base & cover plate on existing modularmetal boxes etc. as required.8 Module |
| 176 | 1.33Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ woodenblock including connection etc as required. |
| 177 | 90.4.8Charges for cutting holes suitable for accommodating exhaust fans up to 305mmsweep including plastering colour washing etc. as required |
| 178 | 2.3.3Supplying and fixing following way, single pole and neutral, sheet steel, MCBdistribution board, 240 volts, on surface/ recess, complete with tinned copperbus bar, neutral bus bar, earth bar, din bar, interconnections, powder paintedincluding earthing etc. as required. (But without MCB/RCCB/Isolator)12 way, Double door |
| 179 | 2.4.2Supplying and fixing following way, horizontal type three pole and neutral, sheetsteel, MCB distribution board, 415 volts, on surface / recess, complete with tinnedcopper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder paintedincluding earthing etc. as required. (But without MCB/RCCB/Isolator)6 Way (4+18),Double door |
| 180 | 2.4.3Supplying and fixing following way, horizontal type three pole and neutral, sheetsteel, MCB distribution board, 415 volts, on surface / recess, complete with tinnedcopper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder paintedincluding earthing etc. as required. (But without MCB/RCCB/Isolator)8 way(4+24),Double door |
| 181 | 2.10.1 Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, \\"\\"C\\"\\" curve, miniaturecircuit breaker suitable for inductive load of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required.Single pole |
| 182 | 2.11Supplying and fixing single pole blanking plate in the existing MCB DB completeetc. as required |
| 183 | 2.10.3Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, \\"\\"C\\"\\" curve, miniaturecircuit breaker suitable for inductive load of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required.Double pole |
| 184 | 2.12.1Supplying and fixing following rating, double pole, 240 volts, isolator in the existingMCB DB complete with connections, testing and commissioning etc. as required.40amps |
| 185 | 2.14.2Supplying and fixing following rating, double pole, (single phase and neutral),240volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milliamperes in the existing MCB DB complete with connections, testing andcommissioning etc. as required.40 amps |
| 186 | OD389167/2025-2026Supplying and fixing surface mounting 20W LED batten fitting (integrated type)with aluminium/plastic body, opal diffuser suitable for use on 230 250 V AC supply,including necessary hardware and electrical connections using copper flexible wire,complete as required |
| 187 | OD389170/2025-2026Supplying and fixing recessed mounted LED downlight/ceiling light fitting of6Wcapacity, cool white (5700K), minimum system efficacy of 100 lumens/Watt, CRI≥ 80, PF ≥ 0.90, THD < 10%,with BIS-certified inbuilt driver, suitable foroperation on 140–270V AC, including necessary wiring, connections, andfixing on false/surface ceiling using approved materials as required, complete as perthe direction of site engineer-in-charge. |
| 188 | OD389172/2025-2026Supplying and fixing recessed mounted LED downlight/ceiling light fitting of 12Wcapacity, cool white (5700K), minimum system efficacy of 100 lumens/Watt, CRI ≥ 80, PF ≥ 0.90, THD < 10%,with BIS-certified inbuilt driver, suitable for operation on 140–270V AC, including necessary wiring, connections, and fixing on false/surface ceiling using approved materials as required, complete as per the direction of site engineer-in-charge |
| 189 | OD389204/2025-2026Supply, installation, testing, and commissioning of wall-mounted LED bed headlights, each of 7W power rating, delivering a minimum of 500 lumens with a warmwhite color temperature (2700K?3000K), suitable for reading and ambient lighting.The LED lights shall operate at 220V AC ±10%, 50Hz, have a power factor ? 0.9,CRI ? 80, and be compliant with IS 10322 (Part 5/Sec 11), BIS, CE, and RoHSstandards |
| 190 | OD389207/2025-2026Supply of Mirror Light, high efficiency with a nominal system lumen output of 760lumens. Luminaire wattage should not exceed 9W. The luminaire should havea CRI > 80. Driver of the luminaire shall have THD < 10% and PF >0.9. Slim LED batten in aluminium housing and decorative end caps. Robust driverwith wide voltage range 100-240 volts and inbuilt protection. Aesthetically designedmirror LED light fixture of 4000 K, of surface mounting which provides soft-lightand glare free symmetrical illumination. |
| 191 | OD389208/2025-2026Supply, installation, testing and commissioning of decorative chandelier type LEDlight fitting of suitable design and size, having a total power rating of 40 W to 60 W(as per room size and illumination requirement), operating on 230 V AC, 50 Hzsingle phase supply, complete with decorative glass or acrylic shade, metal body,suspension chain/rod, integrated electronic driver, all necessary accessories,connection materials, and fixing arrangements as per the direction of the Engineer-in-Charge |
| 192 | OD389209/2025-2026Supply, installation, testing and commissioning of decorative hanging / suspendedLED light fitting, 10?15 W, 230 V ±10%, 50 Hz, single phase AC, Light output:Minimum 900?1200 lumens, Colour temperature: Warm white / Neutral whitesuitablefor indoor use, complete with high-efficiency LED module, decorative diffuser/shade,adjustable suspension wire/rod, ceiling canopy, internal driver, all mountingaccessories, wiring with suitable size copper flexible wire from ceilingrose/connector, making good damages, testing and commissioning, complete asrequired at site. |
| 193 | OD389211/2025-2026Supply, installation, testing, and commissioning of LED TABLE lights of 7W/9Wpower rating, delivering a minimum of 500 lumens with a warm /white/off whitecolor temperature (2700K?3000K), suitable for reading and ambient lighting. The LED lights shall operate at 220V AC ±10%, 50Hz, have a power factor ? 0.9, CRI ? 80, and be compliant with IS 10322 (Part 5/Sec 11), BIS, CE, and RoHS standards |
| 194 | OD389213/2025-2026Supplying, installing, testing and commissioning of 1200 mm sweep Premium BLDCceiling fan, ultra-silent operation, with designer aerodynamic blades, metallicpremium finish, integrated modern aesthetic motor housing, 5-star energy ratedBLDC motor, high air delivery not less than 210 CMM, service value minimum 6.0,RPM approx. 350 (as per IS 374:2019), THD < 10%, PF ≥ 0.90, with remotecontrolledsmooth speed regulation, sleep mode, timer function, complete with 30 cmdecorated downrod, twin canopies, shackle kit, safety rope, copper winding, requiredfixing accessories, earthing, testing and commissioning, including making good thedamages, etc. complete as required. |
| 195 | OD389215/2025-2026Supply, installation, testing and commissioning of 15 litre capacity storage typeelectric water heater (geyser) suitable for wall mounting, with ISI-marked 2 kWheating element, thermostat control, thermal cut-out, pressure and safety valve,indicator lamps, inlet and outlet connections, and all necessary accessories, completewith electrical connections using suitable size copper conductor cable, etc as requiredand as directed by the Engineer-in-Charge. |
| 196 | OD389219/2025-2026Supply, installation, testing and commissioning of single phase in single phase out2kVA Sine wave inverter system (150 Ah) with 2 nos of Tubular battery unitscomplete with rack and interconnections for min 120 mins backup |
| 197 | FIRE FIGHTING |
| 198 | OD388496/2025-2026Supply, installation, Testing and Commissioning of MS class 'B' pipes of followingsizes with fabricated welded joints with necessary fittings/spatials. The rate isinclusive of excavation & wrapping with approved wrapping material.Make: Tata/findal ISI marked 25 mm dia |
| 199 | OD388497/2025-2026Supply,installation,Testing and Commissioning Sprinkler BulbMake:Karthar/HD/Newage PendantType |
| 200 | OD388503/2025-2026Supply,installation,Testing and Commissioning Sprinkler BulbMake:Karthar/HD/Newage Sprinkler flexible Drop 1mtr. Make:Karthar/HD/Newage |
| 201 | OD388504/2025-2026Supply,installation,Testing and Commissioning Sprinkler BulbMake:Karthar/HD/Newage Angle / Chanel Pipe Supports |
| 202 | OD388505/2025-2026Smoke Detector : Supply,Installation,Testing and Commissioning of ConventionalSmoke Detector .Make:Ravel/System Sensor/Gst |
| 203 | OD388506/2025-2026Supply,lnstallation,Testing and Commissioning of 2 core x 1.5 Sqmm FRLSarmoured cableMake: Poly cab /Finolex |
| 204 | OD389363/2025-2026Supply and installation of VRF Concealed Ducted type Indoor Units: The unit casing shall be manufactured from galvanized Steel plate and shall be fully foam insulated. The fan shall be of the dual suction multi blade type, statically and dynamically balanced to ensure low noise and vibration free operation. The fan speed shall be 3 speed control to meet the needs of different conditions. The unit static pressure can be adjusted in the range between 0 and 280Pa (at various speeds) to match the static pressure of the duct connected to the unit. The heat exchanger coils will be manufactured from copper tubes and aluminum fins. It shall have electronic expansion valve to control refrigerant flow rate in response to the load variation in the conditioned space. The expansion valve shall be controlled by an integral computerized proportional integral derivative (PID) control system to maintaincorrect room temperature. |
| 205 | OD389375/2025-2026Supply and installation of VRF Concealed Ducted type Indoor Units: The unit casing shall be manufactured from galvanized Steel plate and shall be fully foam insulated. The fan shall be of the dual suction multi blade type, statically and dynamically balanced to ensure low noise and vibration free operation. The fan speed shall be 3 speed control to meet the needs of different conditions. The unit static pressure can be adjusted in the range between 0 and 280Pa (at various speeds) to match the static pressure of the duct connected to the unit. The heat exchanger coils will be manufactured from copper tubes and aluminum fins. It shall have electronic expansion valve to control refrigerant flow rate in response to the load variation in the conditioned space. The expansion valve shall be controlled by an integral computerized proportional integral derivative (PID) control system to maintain correct room temperature.Medium Static Duct 3.2 TR (8F Suite Room) |
| 206 | OD389385/2025-2026 Supply and installation of VRF Concealed Ducted type Indoor Units: The unit casing shall be manufactured from galvanized Steel plate and shall be fully foam insulated.The fan shall be of the dual suction multi blade type, statically and dynamicallybalanced to ensure low noise and vibration free operation. The fan speed shall be 3speed control to meet the needs of different conditions. The unit static pressure can beadjusted in the range between 0 and 280Pa (at various speeds) to match the staticpressure of the duct connected to the unit. The heat exchanger coils will bemanufactured from copper tubes and aluminum fins. It shall have electronicexpansion valve to control refrigerant flow rate in response to the load variation in theconditioned space. The expansion valve shall be controlled by an integralcomputerized proportional integral derivative (PID) control system to maintaincorrect room temperature.Medium Static Duct 2.0 TR (7F Guest Rooms) |
| 207 | OD389388/2025-2026Supply and installation of VRF Concealed Ducted type Indoor Units: The unit casingshall be manufactured from galvanized Steel plate and shall be fully foam insulated.The fan shall be of the dual suction multi blade type, statically and dynamicallybalanced to ensure low noise and vibration free operation. The fan speed shall be 3speed control to meet the needs of different conditions. The unit static pressure can beadjusted in the range between 0 and 280Pa (at various speeds) to match the staticpressure of the duct connected to the unit. The heat exchanger coils will bemanufactured from copper tubes and aluminum fins. It shall have electronicexpansion valve to control refrigerant flow rate in response to the load variation in theconditioned space. The expansion valve shall be controlled by an integralcomputerized proportional integral derivative (PID) control system to maintaincorrect room temperature.Supply of Corded Remote control for Concealed DuctedIndoor units ( Rooms) |
| 208 | OD388437/2025-2026Refrigerant Cu Piping with Hard drawn Copper pipes, insulated with specifiedthickness nitrile rubber tubings and joints sealed with black tape. 15.9 mm with 19mm thick insulation |
| 209 | OD388438/2025-2026Refrigerant Cu Piping with Hard drawn Copper pipes, insulated with specifiedthickness nitrile rubber tubings and joints sealed with black tape.9.5 mm with 19 mmthick insulation |
| 210 | OD388451/2025-2026Supply, fabricate, handle and erect fabricated GSS ducting as per drawing, completewith all fittings including suspension and supporting arrangement for plenums, ducts,complete as reqd. and as per specs.24G |
| 211 | OD388453/2025-2026Supply and fixing thermal insulation using Closed Cell Nitrile Rubber Insulationaround the duct to reduce heat loss and to reduce sweating with minimum 9mm thick |
| 212 | OD388454/2025-2026Accousttic insulation using 10 mm thick Open cell nitrile rubber with adhessive |
| 213 | OD388455/2025-2026Supply and fix the following grilles as per specifications. Machine made, powdercoated, supply and return air grilles of design to be approved Supply air grill |
| 214 | OD388471/2025-2026Supply and fix the following grilles as per specifications. Machine made, powdercoated, supply and return air grilles of design to be approved Flexible Connection forIDU |
| 215 | OD394937/2025-2026Supply and fixing machine made powder coated supply and return air grilles ofapproved design including flexible connection for IDU with all accessories, complete |
| 216 | OD388472/2025-2026Supply and fixing in position of condensate drain water & indoor unit drain tothe floor trap piping with 9mm thick nitrile rubber insulation and with necessaryfittings like elbows, tees and reducers etc. Openings as good as same. |
| 217 | OD388473/2025-2026Supply and fixing in position of condensate drain water & indoor unit drain tothe floor trap piping with 9mm thick nitrile rubber insulation and with necessaryfittings like elbows, tees and reducers etc. Openings as good as same. Control wiring /network wiring using recommended quality of multicore wires in PVC Conduit |
| 218 | EXCLUSIVE OF GST |
| 219 | Note :1 All materials, Items, Equipment shall be best branded items with IS and approved by client/KEL |
| 220 | 2:Rate should be inclusive of Insurance,Transportation, delivery and installation cost for all items |
| 221 | 3.Rate should be Exclusive of GST. |
| 222 | 4.Work should be executed as per DSR/PWD specification and direction of Engineer at site. |
| 223 | 5.CEMENT: Make use Malabar cement only as per Govt. direction and in case of non availabilty of Malabar cement use Ultra Tech, Dalmia, Ramco or eq. brand in the order of preference. |
| 224 | 6.RCC: (Assessment of strength of concrete by Cube testing at Approved Govt labs as per IS) Cement make: Use Malabar cement only as per Govt. direction and in case of non availabilty of Malabar cement use Ultra Tech, Dalmia, Ramco or eq. brand in the order of preference. |
| 225 | 7.STEEL REINFORCEMENT: Make: Tata,Vaishak, SAIL, JSW or eq primary make in the order of preference |
| 226 | 8.CENTERING & SHUTTERING: (Centering and shuttering for different category of work may be considered separately.) |
| 227 | 9. SOLID BLOCK MASONRY: Min. average compressive strength as per IS shall be 40-50kg/cm2 and has to be assessed by testing at Govt. lab. ( Variation in rate due to change in size of block and level of floor as per DSR/PRICE has to be considered) |
| 228 | 10.PLUMBING & SANITARY FITTINGS: Note: Make of Water supply and sanitary items: Best branded ISI make Jaquar, Cera, Hindware, Parryware or eq. in the order of pref. Water pipe: Supreme, Finolex or eq. with IS and all fittings with IS. |
| 229 | 11.ELECTRICAL: Note: Rate should be inclusive of preparation of schematic diagram and getting approval from KSEB/Electrical Inspectorate. Statutory fees paid to KSEB/EI shall be paid by us separately. |
| 230 | Make of Electrical equipments/materials |
| 231 | All electrical materials/equipments shall be of best branded items with ISI, strictly as per schedule specification |
| 232 | Panel Boards: CPRI certified reputed manufacturers make |
| 233 | MCB/ELCB/DB - L&T/LEGRAND/SCHNEIRDER or equivalent |
| 234 | Cables & wires - Finolex/KEI/POLYCAB/RPG/V-GUARD |
| 235 | Switches/Sockets/Regulators - SCHEIDER/ABB/HAVELS/LEGRAND or equivalent |
| 236 | Cable Glands & Sockets - REPUTED MAKE , Cosmos |
| 237 | Indicating Lamps - TEKINIC/RISHUB/STC, L&T, Schneider or equivalent |
| 238 | Ceiling/Exhaust fan: Havells, Orient, Usha, Crompton Greaves, Bajaj |
| 239 | 12. STEEL WORK G.I.PIPE: Make: JINDAL, Tata or eq. primary make in the order of preference. |
| 240 | 13.DELUXE MULTI SURFACE PAINT SYSTEM: Make: JOTUN, Asian, Berger, Nerolas or eq. in the order of pref. |
| 241 | 14.VITRIFIED FLOOR TILES/ CERAMIC GLAZED WALL TILES: Make: Khajaria, Jhonson, RAK, NITCO, Cera or Eq. in the order of preference and prior sample approval from KEL, Client |
| 242 | 15.ALUMINIUM WORK: Make: INDAL, JINDAL in the order of preference and prior sample approval from KEL, Client |
| 243 | 16.Rigid PVCPipes/Casing & Capping - A-ONE/REPUTED MAKE with ISI , Precession, Balco, GEO |
| 244 | 18. ACRYLIC SMOOTH EXTERIOR PAINT/ SYNTHETIC ENAMEL PAINT/WHITE CEMENT BASED PUTTY/ CEMENT PRIMER: Make: Asian, Berger, Nerolas or eq. in the order of pref. Please Enable Macros to View BoQ information |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
