|
| 1 | Excavation for StructuresEarthwork in excavation for structures as per drawing and MoRD technical specifications Clause 304 including setting out, construction of shoring & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material.Ordinary soilBy manual means |
| 2 | Sand filling in foundation trenches as per drawing & MoRD technical specification Clause 304. |
| 3 | Plain/reinforced cement concrete (using jhamabrick aggregate) in open foundations as per drawings & MoRD technical specifications Clauses 1500,1700,2100 . (including centering, shuttering, staging etc. but excluding reinforcement)I)PCC grade M10 (using jhama brick aggregate) |
| 4 | Plain/ reinforced cement concrete in substructure complete including formwork as per drawing & MoRTH technical specification Clauses 1500,1700,2200. (including centring, shuttering, staging etc. but excluding reinforcement )iii)R.C.C grade M25upto 5m heightUsing conncrete mixer |
| 5 | Supplying, fitting & placing Thermo-Mechanically treated bar/ Cold twisted deformed steel bar reinforcement in foundation complete as per drawings & MoRD technical specifications Clauses 1000 & 1202. |
| 6 | Providing weepholes in brick masonry / stonemasonry, plain/ reinforced concrete abutment, wingwall, return wall with 100 mm dia AC pipe or uPVC pipe (110 mm OD of 6.0 Kg/cm2 pressure) extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and MoRD technical specification clauses614,709,1204.3.7 |
| 7 | Construction of Embankment with Material Obtained from Borrow PitsConstruction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 2000 m as per MoRD Technical Specification Clause 301.5. |
| 8 | iii)Brick edging laid in full brick widthProviding and laying brick edging on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 KN as per MoRD Technical Specification Clause 412. |
| 9 | Brick Soling ii)Flat Brick soling Providing and laying brick layer on on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 kN as per MoRD Technical Specification Clause 412. Please Enable Macros to View BoQ information |
