|
| 1 | Structural steel work using M.S. flats, angles, channels I-section, H-section etc. riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 2 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 3 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete. 10 litre capacity.White |
| 4 | Providing precast cement concrete Jali 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 sand) etc. complete excluding plastering of the jambs, sills and soffits. 50 mm thick |
| 5 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 25mm nominal bore. Weighing not less than 62 gms. |
| 6 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 15 mm nominal bore, 105 mm long. Weighing not less than 138 gms. |
| 7 | Providing and fixing PTMT stop cock of approved quality and colour.20mm nominal bore, 89mm long. Weighing not less than 88 gms. |
| 8 | Providing and fixing C.P.brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore |
| 9 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 10 | Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg / cm2 and water absorption not more than 20% in super structure above plinth level and up to floor two level i/c curing etc complete. Cement Mortar 1:6 (1 cement : 6 sand) |
| 11 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work including cutting chases and making good the walls etc. 20 mm nominal outer dia .Pipes. |
| 12 | 20 mm cement plaster of mix : 1:6 (1 cement : 6 sand) |
| 13 | Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. Samples approved by Engineer-in-Charge.Cuddpah stone |
| 14 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. Rate includes recess cutting in floor and making good the same wherever required. |
| 15 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 16 | Providing and Fixing of 110 mm OD PVC pipe line Supreme/ Kisan or equivelent approved make (2.50 kg/Sq.cm pressure) with necessary clamp with fixing in position etc. including removal of old pipe Base Rate Rs. 273.93 |
| 17 | Providing and Fixing in position 110 mm dia. Moulded shoe of Supreme/ kisan or equivalent make complete with all necessary materials and labour..Base Rate Rs. 169.74 |
| 18 | Providing and Fixing in position 110 mm dia. Moulded plain bend of Supreme/ kisan or equivalent make complete with all necessary materials and labour.Base Rate Rs. 199.00 |
| 19 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete.Note : Putty shall be applied only on the internal walls, for application on the exterior walls prior permission of APD/Chief Engineer will be required. |
| 20 | Finishing walls by any mechanical or manual means with Premium Acrylic Smooth exterior paint (Premium exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior water-proofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface) |
| 21 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level :With 20mm nominal size graded stone aggregate.M-15 – Grade concrete |
| 22 | Providing and fixing white vitreous china 1st quality Orrisa pan of Perry ware, Hind ware or approved equivalent make of size580X440mm with PVC P trap, the work includes dismentling of existing cement disposed of the debris up to distance of 200 mm i/c cost of Orrisa pan, P trap raising of WC level (by filling sand ) upto 150 mm and connecting the new Orrisa pan to the manhole outside the building with 10 mm dia. PVC pipe i/c 50mm thick cement concrete floor of M:15 core. All complete as per the instruction of the Engineer in charge. Base Rate Rs.3700/- Each. Please Enable Macros to View BoQ information |
