|
| 1 | Supply and fixing of 1200 mm (48\\") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp.(SD110) |
| 2 | Supply and fixing of single box type 4'40 W flu fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting.(SD 88) |
| 3 | Supply and fixing of fancy glass shade and 7W / 9W LED bulb SD79 |
| 4 | Supply and fixing of 20W LED street light fitting with LED (Higher end) with 25 mm dia. GI pipe (class B) with 1 no. 25 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting . SD455 |
| 5 | 32Amps 400V Change Over Switch |
| 6 | MCB 10A single pole MCB |
| 7 | Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone M.Sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three M.Sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works) |
| 8 | Supplying and fixing best approved best quality brass CP soap tray of size 150 x 100mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works). |
| 9 | Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works). |
| 10 | Supply and Fixing of CP two way Bib cock with health faucet |
| 11 | Supplying and fixing in position Brass C.P.Shower rose 100 MM Dia. with stop cock arrangement , of size 15mm dia with necessary cutting ,threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers. |
| 12 | Supplying and fixing Teakwood fully panelled (Single Leaf) shutters using Teakwood scantlings of size 100x40mm for styles & rails, 22mm thick planks for panels(5 Nos) and Brass Furniture fittings(3 Nos - Brass Hinges 125x30mm, 2 Nos - Brass Tower bolt 300x12mm, 1 Nos - Brass Tower bolt 200x12mm, 1 Nos - Brass Aldrop 250x16mm, 2 Nos - Brass Handle 200mm) including cost of wind appliances and labour charges for fixing the furniture fittings in position etc., complete complying with standard specification and as directed by the departmental officer |
| 13 | Supplying and fixing Teakwood frame with scantling above 2m for doors including labour charges for wrought and putup and fixing holdfast in frame etc., complete complying with standard specificationand as directed by the departmental officers |
| 14 | Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc., |
| 15 | Supply and fixing of 1200 mm (48\\") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp.(SD110) |
| 16 | Supply and Erection of PVC CASING PIPE AS PER IS 12818 / 2010 150mm dia including all cost ec.., |
| 17 | Supply and Erection of PVC CASING PIPE AS PER IS 12818 / 2010 200mm dia including all cost ec.., |
| 18 | Supply and delivery of 1HP Single phase Submergeble Pumpset as per Is 8034 with out Panal Board including all labour charges etc (15 Lpm x 40mHead) ( WD-M1598 |
| 19 | Supply and delivery of 1 HP Single phase Panal Board With two level gurd and Auto Start including all labour charges etc Complete (WD-M1907 ) |
| 20 | 32Amps 400V Change Over Switch |
| 21 | 25 mm HDPE Pipes PN6 PE80 |
| 22 | Nylon Rope for Bore-well |
| 23 | 25mm CPVC Pipe |
| 24 | 25mm CPVC Elbow |
| 25 | 25mm CPVC Tee |
| 26 | 25mm CPVC BallValve |
| 27 | 20mm CPVC Pipe |
| 28 | 20mm CPVC Elbow |
| 29 | 20mm CPVC Tee |
| 30 | 25mm FTA |
| 31 | MS Bore Cover |
| 32 | MS Clamp Set |
| 33 | 2.5 Sqmm 3 core Flat cable |
| 34 | 25mm PVC Pipe |
| 35 | 25mm PVC Bend |
| 36 | 25mm PVC Elbow |
| 37 | 25mm PVC Tee |
| 38 | 20mm PVC Bal Valve |
| 39 | 25mm Tank Nipple |
| 40 | Woodern Board 0.60x0.45 |
| 41 | 25 mm Waste Not Tap |
| 42 | 25 mm GM NR Valve |
| 43 | 25 GI Pipe |
| 44 | 32 GI Bend |
| 45 | 110mm PVC Pipe 4kg |
| 46 | 110mm PVC Door Elbow |
| 47 | 110mm PVC Elbow |
| 48 | 110mm PVC Tee |
| 49 | 110mm PVC Cowl |
| 50 | 75mm PVC Pipe |
| 51 | 75mm PVC Door Elbow |
| 52 | 75mm PVC Elbow |
| 53 | 75mm PVC Tee |
| 54 | Laboar charges for the erection of submersible pumpset in Borewell including fixing jointing submersible cable with proper clamps up to starter to required depth ande also fixing of riser pipes to the recquired depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter, Ammeter, Three pilot (indicating) lamps capacitor single phasing preventor, Water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days |
| 55 | Geo Physical Charges Please Enable Macros to View BoQ information |
