|
| 1 | Maintenance work |
| 2 | 15.31:Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 3 | 50.9.14.1:Supplying and fixing Anjily wood reapers of size 50x25 mm with wire nails including cost and conveyance of materials etc. complete. |
| 4 | 50.9.13.1:Supplying and fixing Anjily wood wrought and put up for roof members including cost and conveyance of materials etc. complete . |
| 5 | 12.48:Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately) |
| 6 | OD503853/2025-2026:(Derived from 12.48) Providing & fixing on roof Departmental pressed clay tile (Mangaloretile) of 20 mm nominal thickness and of approved size and as per approved pattern on steelframe work complete (steel frame work to be paid separately) |
| 7 | OD503858/2025-2026:(Derived from 12.49) Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness in cement mortar 1:3 and of approved pattern on steel frame work complete (steel rame work to be paid separately ). |
| 8 | OD503859/2025-2026:(Derived from 12.49) Providing & laying on roof Departmental pressed clay tile ridge(Mangalore tile) of 20 mm thickness in cement mortar 1:3 and of approved pattern on steelframe work complete (steel frame work to be paid separately ). |
| 9 | OD493306/2025-2026:Supplying and fixing 150mm dia PVC rain water gutter semi circular section including fitting with 32mmx5mm MS flat supporters at 1m interval etc. complete |
| 10 | OD513390/2025-2026:(Derived from 21.5) Providing and fixing Anodised aluminium work consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ). |
| 11 | 50.12.4.1:Providing and fixing false ceiling with 7.5 mm thick PVC plain panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete (aluminium frame work shall be paid separately) |
| 12 | OD463942/2025-2026:Labour engaged for maintenance for doors and windows |
| 13 | 13.88:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 14 | 14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand) |
| 15 | 13.111.1:Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface |
| 16 | 13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work |
| 17 | OD481326/2025-2026:Artistic pictures wall painting with acrylic emulsion paint of approved brand and manufacturewith different co lour,shades as per requirement two or more scoats on new work |
| 18 | OD481350/2025-2026:Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cmin depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and liftup to 1.5 m as per direction of site Engineer-in-charge.(Modified Spec 50.2.26.1) |
| 19 | OD481335/2025-2026:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M- 30 grade made by block making machine with strong vibratory compaction, of approved size,design & shape, laid in required colour and pattern over and including 50 mm thick compactedbed of coarse sand, filling the joints with fine sand etc. all complete as per the direction ofEngineer-in-charge |
| 20 | 10.25.2:Item Shifted to Sub head 14 as item 14.73Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works Please Enable Macros to View BoQ information |
