|
| 1 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Havells / Finolex/Polycab) partly in 20mm size PVC rigidconduit 'FR' (Precision make) [for ceiling portion only] and in19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling andremaining portion concealed]average run. 10 Mtr |
| 2 | Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Havells / Finolex/Polycab) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box andmending good the damages to original finish On Board |
| 3 | Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Havells / Finolex/Polycab) of the following sizes in the prelaidpolythene pipe and by the prelaid GI fish wire and making necy. connection as required |
| 4 | 3 x (1.5 sqmm) |
| 5 | 2x(2.5 sqmm)+1x(1.5 sqmm) |
| 6 | 2x (6 sqmm) + 1x (4 sqmm) |
| 7 | Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, paintingand mending good damages to building works including S&F bakelite/perpex top cover as per GS |
| 8 | 175 x 100 x 65 |
| 9 | 200 x 150 x 65 |
| 10 | 240 x 200 x 65 |
| 11 | Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthingattachment. 2+12 Way [ Legrand 607712 ] or equivalent model of Schneider/Siemens |
| 12 | Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provisionfor earthing attachment( Make - Legrand 607715 ) 4Way or equivalent model of Schneider/ Siemens |
| 13 | Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provisionfor earthing attachment( Make - Siemence 8GB31572RC ) 6 Way ( Up to 160 A ) or equivalent model of L&T / ABB |
| 14 | Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as perGS [Make-Legrand / Schneider / Siemens ] |
| 15 | 40 A DP |
| 16 | 63 A FP |
| 17 | Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS [ Make -Legrand/ Schneider / Siemens ] |
| 18 | 6-32 SP |
| 19 | 63A TP |
| 20 | Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection [ Make - Legrand / Schneider / Siemens ] 160 A FP |
| 21 | Supplying and fixing 415V, TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc as per GS [ Make L& T / Havells / Siemens ]. 160A |
| 22 | Supplying and fixing 415V, TPN SFU with sheet steel enclosure on angle iron frame on wall with 3 nos HRC fuse as per GS.( Make -Simens / L&T/Havells ). 160A |
| 23 | Supply of 4/3.5 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make: Gloster / Polycab / Havells / RR ] |
| 24 | 2 Core 10 Sq. mm |
| 25 | 4Core 25 Sq. mm |
| 26 | 4 Core 95 Sq. mm |
| 27 | Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl.removing the rubbish |
| 28 | 2.5 to 35 Sq. mm |
| 29 | 35 to 95 Sq. mm |
| 30 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables and Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials |
| 31 | 2 Core 10 Sq. mm |
| 32 | 4 Core 25 Sq. mm |
| 33 | 4 Core 95 Sq. mm |
| 34 | Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings as per GS 50mm dia |
| 35 | Supply & Fixing 240 V, 2 Nos 6A, plug socket with separate 2 Nos 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 175x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. |
| 36 | Supply & Fixing 240 V, 4 nos. 6A, plug socket with separate 4 nos. 6 A Piano key type switch, indicator & 16A switch type SP MCB (Brand approved by EIC) on sheet metal switchboard embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch bycutting bakelite/perspex cover and making necessary connections as required |
| 37 | Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required |
| 38 | Fixing only single/twin fluorescent/ LED light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. |
| 39 | Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. |
| 40 | Supply & Fixing angular batten holder (Anchor) on 75mm dia PVCround block / round bakelite on wall/ceiling as per GS |
| 41 | Supply of Single LED tube light fitting (Make : Philips : TMC 502 1 X T LED 22W with 1 no. Master LED Tube 1200mm 2100lm 18W tube light or equivalent model of Wipro/Jaquar) complete with all accessories |
| 42 | Supply of Twin LED tube light fitting (Make : Philips : TMC 502 2 X T LED 22W with 2 nos. Master LED Tube 1200mm 2100lm 18W tube light or equivalent model of Wipro/Jaquar) complete with all accessories |
| 43 | Supply of 10 watt LED Light (Make Philips/Wipro/Jaquar) |
| 44 | Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting |
| 45 | Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/ perspex top cover by screw incl. making necy. connections etc. |
| 46 | Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessaryconnection as required by 2x1.5 sqmm flexible copper wire. |
| 47 | Supply and Fixing 12'', 920 RPM exhaust fan after making holes in wall including Supply & Fixing GI sheet (20SWG) metal Cowl with MS flat iron frame & GI wire mesh on wall as per GS (12\\") |
| 48 | Supply of 240 V 50 HZ AC 1200 mm Sweep ceiling fans complete with all accessories incl P2 capacitor, safety wires etc.having the following Model / Cat No. ( Make -Usha Striker or equivalent model of Crompton Greaves/Orient ) |
| 49 | S & Erection of mini pole of size 6 ft. long approx 80 mm. dia seamless pipe Class - B , on the roof of the Bldg. By S& providing M.S. plate incl. Rose type arrangement near base plate for smooth cable entry position and making C.C. muffing of size 450 x 450 x 600 mm. hight with cement mortor mixture ( 6 : 3 : 1 ) incl. neet cement finish before cheaping properly the existing roof incl. S& providing earth bold after drilling holl etc. as per direction of E.I.C. |
| 50 | S&F cylindrical type pole head suitable for 80 mm. dia seamless pipe and should be waterproof & fabricated from steel member steel pipe. The cylindrical portion of the pole head which sleeve over the pole shall have a length of 40 cm. ( 18\\" ) approx. Incl. making 225 mm. dia ( 9\\" ) cable terminal box. The above terminal box welded with sleeve incl. S&F 1 No. 4 way bakelite terminal AC/DC make & 1 No. 15 Amp. fuse base & bridge inside the cylindrical portion of the header assembly as per direction of E.I.C. |
| 51 | S&F 50 mm. dia 1.5 mtr. long detachable type Single arm bracket, suitable for pole head. The arm bracket shall be properly welded with 15 mm. thick stifner plate of pole sleeve for strengthening incl. properly fixing arrangement with the pole by bolts, nuts and washer as per direction of EIC |
| 52 | Inter connection of LED light fittings by 2 x 1.5 Sq. mm. PVC insulated copper wire from pole loop box with best quality PVC pipes as per direction of EIC |
| 53 | Supply & Fixing of aerodynamically designed 240V, 90 Watt LED light fittings with toughend glass protection and optics mirror for better illumination having colour temparature 5700K or higher, luminious efficacy 120 lm/wt or higher, IP 66 or beter, IK 08 or better [ Crompton : Cat No. CRP-411-90-57-HL2-GL-NSG or equivalent model of Wipro/Jaquar] [OEM Warrenty 5 Years] |
| 54 | Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint Upto 9.0 mtr. long pole 1st coat of aluminium paint over 1 coat of RO priming and 2nd coat of aluminium paint over 1st coat as per GS |
| 55 | Timer Panel:Supplying and fixing (2+12)way Legrand DB enclosure for housing the following A) One no.single dial digital timer (Legrand) B)One no. FP pole, conctractor 40 AMP,(LEGRAND) C) One no. FP 63A MCB (Legrand) D) One no. auto/manual Toggel Switch and other required material The complete arrangement must be wiring by PVC insulated Cu wire as per GS |
| 56 | SITC of Steel lettering acrylic signages made of 22 SWG stainless steel enclosed except the facia. The facia should be made of acrylic. provision should be as such that Inside each letter Heat sinkable LED lights will glow throughout the letter. S/F of 15'x6'x10\\" ACP sheet of 4mm thickness fixed on iron frame, on which the letters will be fixed. Installation of the above mention board by expert labour above the main gate makig arrangement for holding the board by 1.5\\" iron angle. Making scrapholding arrangement for fixing the board above the gate approx height 20 Ft .incl S&F 32 mm steel channel on complete edge . The letter will be fixed on the board by steel nut bolt etc. Additional arrangement to support the board by iron structure grouted on the gate slab and internal wiring connection as per direction of E.I.C |
| 57 | Excavation of soil for installation of Earth Electrode and filling & ramming as per GS For Morum Soil |
| 58 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S &F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground by TATA -medium GI Pipe |
| 59 | Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection toequipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages 4SWG |
| 60 | Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete withGI bolts, nuts, washers, spacing insulators etc. as required Please Enable Macros to View BoQ information |
