|
| 1 | Dismentalling of CGI Sheet including Disposal all complete. |
| 2 | Excavation work in excavation by manual means in foundation trenches, drains, pipes and cables etc. (Not exceeding 1.5m in width or 10sqm on plane) including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus soils and directed, within a lead of 25mtr. all kinds of soil. |
| 3 | All kind of soil @ 70% |
| 4 | Ordinary rock @ 20% |
| 5 | Hard rock (B.P) @ 10% |
| 6 | Dy stone soiling(any thickness) on levelincluding cost of stone. |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work upto plinth level 1:3:6 ( 1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size)(crushed) |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work upto plinth level 1:2:4( 1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size)(crushed) |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slop upto 15% landing, balcones, lintel, stairs case etc. upto floor five level excluding cost of centering, shuttering, finishing and reinforcement: (1:1.5:3 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). |
| 10 | Reinforcement for RCC work including straightening, bending, and cutting, placing in position and binding all complete .Hot rolled deformed bars. (Thermo-Mechanically treated bars.) |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 12 | Foundation, footing bases of column |
| 13 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 14 | Coloumns/ pillars |
| 15 | Lintel beams, plinth beams, griders, bressument and cantiliver |
| 16 | Suspended floors, roofs, landing, balconies & acess platform |
| 17 | Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position with cement motor 1:3(cement: 3 course sand) cost of required centering shuttering and finishing smooth with 6mm thick cement plaster 1:3(1cement:3 fine sand) on exposed surface complete 1:3:6(1cement:3 coarse sand :6 graded stone agg, 20mm nominal size |
| 18 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Using first class kail wood. |
| 19 | Providing and fixing paneling or paneling and glazing shutter in paneled or paneled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion in side grooves or rebates to be measured) paneling of paneled or paneled and glazed shutters 25mm to 40mm thick. Ist class kail wood (ISI marked flush door shutters) |
| 20 | 15 mm thick cement plaster in cement in cement mortar 1:4 (1 cement:4 fine sand) |
| 21 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 22 | Finishing walls with water proofing paints of required shades new work or two or more coats applied @3.84kg/10sqm. |
| 23 | Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 24 | Painting with synthetic enamel paint of approved brand and manufacture of required to achieve even shade and colour. Two or more coat on new wok over and under coat of suitable shade with ordinary paint of approved brand and msanufacture. |
| 25 | Providing and fixing 5 mm thick glass (cloured or plain as peruired at site) including ist class beading with nails complete |
| 26 | Providing hoisting and fixing trusse/ purlins, rafters/ posts. Post plates of truss components of 1st class budloo wood/ fir wood including cost of screws etc complete. |
| 27 | ProvidingcorrugatedG.S. sheetroofingincludingvertical /curved surface fixedwithpolymercoatedJorLhooks, bolt sandnuts 8mm dia metrewithbitumen andG.I. limpetwashers orwithG.I. limpetwashers filledwithwhite lead, including acoat ofapproved steel primer and two coatsofapproved paint on overlapping ofsheets complete (uptoany pitchinhorizontal/ verticalorcurved surfaces), excludingthe cost of purlins,rafter sandtrussesand includingcuttingto size and shape wherever required 0..00 mm thick with zinc coating not less than 275 gm/m3 |
| 28 | Providing and fixing Gabble/weather boading with PGI desingned sheet including fixing in position |
| 29 | Structural steel work in built up sections , Gate framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 30 | P/F 1st quality ceramic glazed tiles conforming to IS 13753 of min thickness 5mm of approved make like NITCO, ORIENT, SONMANY KAJARIA, or equavelent make in all colour, shades except begundy, bottle green, black of any size as approved by Engineer. |
| 31 | Dismentalling of tiles including Disposal all complete job |
| 32 | Providing and fixing Stainless steel railing with posts/ railing upto height 2.5 feet with three layer including all fixture complete job. |
| 33 | P/F white vitreous china pedestal type water closet ( Indian type) with seat and lid, 10 litre low level white vitreous china flushing cistern wall mounted and CP flush with fittings, C.I / M.S brackets 40mm bend diameter flush bent, muncipal design complete including painting of fittings and brackets, cutting making good the walls and floors whenever required.W.C pan with ISI marked white solid plastic seat and lid. |
| 34 | P/F PPR pipes complete with PPR fittings complete and clamps, including cutting and making good the walls etc.and inslation with heat wire,thermocoil and almunium sheet cover as directed by incharge engineer. |
| 35 | 25 mm dia with heat trassed wire insulation |
| 36 | 32 mm dia with heat trassed wire insulation |
| 37 | 32 mm dia without insulation |
| 38 | 40 mm dia without insulation |
| 39 | Providing and fixing 6 layers Sentex including insulation with Glass wool, thermocoil, chekan mesh, black polythine and almunium cover all complete job. |
| 40 | Providing and fixing soil waste & vent PVC pipe with complete fittings like bend, tee, sowket, etc including glass wool insulation with almunium cover sheet. |
| 41 | 100 mm dia with Insulation |
| 42 | 75 mm dia with insulation |
| 43 | P/Fixing PVC F-Trap. |
| 44 | P/Fixing PVC P-Trap. |
| 45 | Providing and fixing Bathroom items (Jagwar, Sera,) or equalent compony |
| 46 | wall Mixer |
| 47 | C.P Angle/ stop cock |
| 48 | C.P Bib cock |
| 49 | Wash Basin Mixer |
| 50 | Wash Basin |
| 51 | Providing and fixing Handle, Tower bolts, L-drop, & heings etc (Goderge) as directed by incharge engineer. For Doors |
| 52 | Providing and fixing Handle, Tower bolts, L-drop, & heings etc (Goderge) as directed by incharge engineer. For windows |
| 53 | providing and fixing 1\\"x1\\" window mesh including ist class beading with nails complete |
| 54 | Providing and Fixing Latest alimra upto 1'6\\" to 2' deep including fixing of all fittings like heings, Handle, L Drop, magnitic etc all complete with required 19 mm, 12 mm thick plywood, Beading, Samika, etc as per Dierection of Incharge Engineer |
| 55 | Providing and Fixing Condute pipe including elbow, junction, steel junction point etc as per required at site. |
| 56 | Providing and fixing flooring Leben AC4 including beading and all fixture complete. |
| 57 | Providing and fixing wood work in frames of ceilin/flooring joist, partitions etc. sawn and fixed in position with 2nd class Budloo wood. |
| 58 | Providing and fixing Noti point Plywood 6 mm thick including ist class beading all complete |
| 59 | Providing and fixing Wooden Panelling of Rait wood |
| 60 | Varnishing with varnish of approved brand and manufacture :Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish |
| 61 | French spirit polishing two or more coats on new works including a coat of wood filler |
| 62 | Marbleworkgangsawcut (polishedandmachinecut)of thickness 18mm for wall lining(veneerwork),backingfilled withagroutof average 12mmthickin cementmortar1:3 (1cement : 3coarse sand), including pointingwithwhite cementmortar 1:2 (1white cement : 2 marble dust)withanadmixtureof pigmenttomatch the marbleshade (Tobe secured tothebackingbymeansof cramps, which shall be paid for separately). Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. |
| 63 | Filling available excavated earth (incl. rock) in trenches plinth, sides of foundationetc in layer soil exceeding 20cm in depth consolidation each deposited layer by ramming and watering, lead upto 50cm and lift upto 1.5 mtr. |
| 64 | Disposal of excavated earth by MT 5 km |
| 65 | Providing and Fixing Water Pump Mortor 1.0 HP. Please Enable Macros to View BoQ information |
