|
| 1 | Container Based Store Room Supply, designing, fabrication and installation of store room using container of size (LxBxH) 20'0\\"x80\\" X 8'6\\" Structure shall be made in MS pipes of size 50 X 25 X 2mm (at 04 walls and false ceiling of the container) with provision of nut-bolts/fastners. The flooring shall be made using ceramic tiles of reputed brand having size 1 X Walls shall be made using MDF Board leak proof/water proof of 6mm thickness and having adequate provision for thermal insulation, door wardrobe, PVC office curtain & 2 window for air ventilation. Door shall be made using Gt Sheet on the outside and MDF Board on the inside having size x3 Addition to this, 1 PVC door shall be provided in the toilet of size 8x5 Toilet shall hac 1 nos. toilet pots (EWC) with all sanitary and CP fittings with tap, towel ring, paper holder including all plumbing works with GUPVC in each unit and good quality mirror. The office block shall also have necessary arrangements of lighting such as lights, 6 nos. 6 watt conceal spot light, 2 nos 15 watt LED Tube Lights, 4 Power sockets 16 Amp AC power Socket 32 Amp., 1 nos 3 nos. Exhaust fans, 2 nos, small cealing fan and 2 nos water proof bulkhead wall spot light for outside. The container(s) should be placed in the balanced manner & should be properly grouted in the ground. All the metal parts shall be duly painted using good quality of paint (As per direction of the officer-in charge |
| 2 | Supply and fixing of Steel weld mesh Jali (Total area of W.No- 61, 62, 63 = 95.28 Acre, 3 Jali Per Acre 95.28 X 3=285.84 Nos Total Weld Mesh jali 285.84 Nos., Size of 1 Jali 8.4 Sqm(7 mtr x 1.2 mtr= 8.4 Sqm)Total= 285.84 X 8.4 =2401.05 Sqm. |
| 3 | Supply of Decomposing culture for composting in good quality at Green Waste management Centre in Horticulture Department Keshav Puram Zone |
| 4 | Supply of Genweigh Electronic Scale, RLJPS, 500 Kg x 100 Pm, Heavy Duty in Green Waste Management Centre Horticulture Department Keshav Puram Zone |
| 5 | SPECIFICATION Power- 7.5 H.P. 3 phase crompton greaves electric motor with motor starter, Body : 4 MM heavy duty Body, Wheels: Heavy duty 4 caster wheels. Chipping Blades: Carbon steel 56 Blades. Belt: 2 V- Belts B-Size, Drive: 2 Pulley and Drive System |
| 6 | Manual vermin-compost Sieving MachineMaterial - Ms iron, Screener Size - 5-6mm (according to your requirement), weight- 150-300kg, Capacity -1000kg Depend your labour, Usage/Application - filter any type dry product, Color - green, Phase -manual, Is It Portable -Portable, Driven Type 3-4days, Mesh Size 5mm (according to your requirement),Product Type - Vermin-compost machine, Length -7.5feet, Country of Origin-Made in India |
| 7 | Premium Poly Propylene packing bags Large Plastic Gunny Bags for Packing & Storage, Heavy Duty Polythene Bags for Vegetables, Mushrooms, Dust, Courier & Home Storage 50kg Capacity (28'' WX 42'' H). 1 kg having 25 bags approx & rate of 1 bag is 18 Rs. |
| 8 | Katta Silai Machine Capacity-50 bags/min, Machine Type-Motor Operated, Number Of Needles-1, Usage/Application-Heavy Material, Needle Size-7.2, Model Name/Number-Rixo, Country of Origin-Made in India |
| 9 | Spun Black Cf Polyester Sewing Thread, Packaging Type: ReelColor-Black, Packaging Type- Reel, Yarn Type- Spun, Usage- Industrial |
| 10 | PVC Pipe 2 Layer Braided Size 1\\" (30 Mtr. Roll Each) |
| 11 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge 18.9.5 40 mm nominal dia Pipes |
| 12 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 18.17.3 40 mm nominal bore |
| 13 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 18.12.5 40 mm dia nominal bore |
| 14 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 18.46.5 40 mm nominal bore |
| 15 | Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required 16.13.1 bituminous portion |
| 16 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade 13.65.1 Two or more coats on new work |
| 17 | Copper base Alloy Body & ARM, Brass Hex Nut,Brass Inlet jacket and Brass Nozzel (NS-03 3/4\\" Metal Sprinkler 380 gm ISI Mark) |
| 18 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 All kinds of soil |
| 19 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 20 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.16.2 Hot finished seamless type tubes |
| 21 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 22 | 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 23 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : 13.48.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @0.80 ltr/ 10 sqm of approved brand and manufacture |
| 24 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 25 | Providing and fixing name board made of MS Sheet 90x60cm, 1mm thick with frame of MS angle 50x50x6mm, two diagonal braces at the back of the sheet of MS flat 40x6mm, total height of the board above ground level 2.40m, length of legs below ground 0.30m embedded in CC block 1:2:4 (1cement: 2coarse sand: 4graded stone aggregate 20mm nominal size) 30x30x45cm including excavation and removal of surplus earth with in 50m lead, applying priming coat of approved steel primer, painting with synthetic enamel paint of approved quality and lettering with enamel paint of approved colour (one side) as per drawing/direction of Engineer-in-Charge. |
| 26 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil |
| 27 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 28 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc.complete. Hot finished seamless type tubes |
| 29 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with totalcoating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 30 | 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 31 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @0.80 ltr/ 10 sqm of approved brand and manufacture |
| 32 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 33 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) |
| 34 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived fromnatural sources) |
| 35 | Providing and fixing name board made of MS Sheet 90x60cm, 1mm thick with frame of MS angle 50x50x6mm, two diagonal braces at the back of the sheet of MS flat 40x6mm, total height of the board above ground level 2.40m, length of legs below ground 0.30m embedded in CC block 1:2:4 (1cement: 2coarse sand: 4graded stone aggregate 20mm nominal size) 30x30x45cm including excavation and removal of surplus earth with in 50m lead, applying priming coat of approved steel primer, painting with synthetic enamel paint of approved quality and lettering with enamel paint of approved colour (one side) as per drawing/direction of Engineer-in-Charge. |
| 36 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 All kinds of soil |
| 37 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 38 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc.complete. 10.16.2 Hot finished seamless type tubes |
| 39 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 40 | 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 41 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : 13.48.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture Please Enable Macros to View BoQ information |
