|
| 1 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : |
| 2 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 3 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth level up to floor all level in shapes and sizes in |
| 5 | 15mm cement plaster in single coat on fair side of brick/ concrete/ stone walls for exterior plastering i/c bends at corner ( as shown in arch drawing) upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and smooth including carriage of materials within allleads and lifts. |
| 6 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete |
| 7 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: |
| 8 | Providing and fixing false ceiling as desired shape and quality at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge |
| 9 | \\"Providing and fixing factory-finished uPVC (Unplasticized Polyvinyl Chloride) window/door frames and shutters, manufactured from multi-chambered, UV-stabilized profiles with a minimum wall thickness of 2.2mm to 2.5mm. Profiles shall be reinforced with internal galvanized mild steel (G.I.) sections of minimum 1.2mm thickness. The unit shall include 8mm thick clear toughened glass (tempered) as per safety standards, fixed using EPDM gaskets and uPVC glazing beads. All joints and corners are to be mitered and fusion-welded for strength. Insect Mesh: A dedicated third track fitted with a sliding fly-mesh shutter, made of high-quality 304-grade stainless steel or PVC-coated fiberglass mesh in an aluminum/uPVC frame.Fitments and Hardware: The rate shall include all necessary hardware, such as:Multi-point locking systems for enhanced security.Stainless Steel (S.S.) hinges or heavy-duty friction stays.Powder-coated handles (Touch lock or Cockspur).High-quality wool pile for dust and noise insulation in sliding systems.Installation using S.S. fasteners and sealing with weatherproof silicone sealant over a backer rod. All work must be completed as per manufacturer’s specifications, approved drawings, and Indian Standard IS 17953:2023.\\" and as per direction of Engineer in Charge |
| 10 | Providing and fixing laminated wooden flooring of standard commercial grade (AC4), 12mm thickness, composed of water-repellant HDF panels with direct pressure laminate finish and protective abrasion-resistant film. The lump sum rate includes all associated costs for supply and installation, including 3mm underlay, floor transition strips, 100mm skirting profiles, all necessary accessories, cutting wastage, and labor charges.\\" |
| 11 | Providing and fixing WPC (Wood Polymer Composite) panelling on walls, composed of a premium blend of wood fibres and high-density thermoplastics. Panels shall be of 12mm to 25mm thickness (as per design), featuring a fluted/louvered or flat profile with factory-finished UV-stabilized lamination. The installation shall include: Framework: Provision of an internal grid/frame using aluminum sections or WPC rafters where required for surface levelling.Fixing: Panels to be secured using concealed stainless steel clips/fasteners or high-strength adhesive (for interior flat surfaces).Accessories: Rate shall include all matching WPC edge trims, L-profiles, and corner connectors to ensure a seamless finish.Properties: The material must be 100% waterproof, termite-proof, fire-retardant, and resistant to warping or decay.All work to be executed as per approved designs and manufacturer's specifications.\\" |
| 12 | Electrical Wiring Please Enable Macros to View BoQ information |
