Tender For Construction Of Mems Sensor Fabrication Lab At Csir-Ceeri, Pilani, Jhunjhunu-Rajasthan

TDR : 54579905

Tender Notice
BOQ

14 Days Left

Jhunjhunu , Rajasthan

Tender Brief : Tender For Construction Of Mems Sensor Fabrication Lab At Csir-Ceeri, Pilani

Document Fees
₹ 1500 /-

EMD
₹ 5261000.0 /-

Tender Value
₹ 26.30 Crore /-

Submission Date
26-03-2026

Competition Type
Indian

Bidding Type
Works

Need a Business Loan? Apply Now !


1	CIVIL WORK:- Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth a lead within CEERI campus and lift upto 1.5 m, as directed by Engineer-in- Charge:
2	All kinds of soil
3	Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, a lead within CEERI campus as per direction of Enginner In Charge.
4	All kinds of soil
5	Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead within CEERI campus : All kinds of soil
6	Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
7	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering,lead within CEERI campus and for all lift
8	Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
9	All kinds of soil
10	Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
11	Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level
12	1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
13	Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc., including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete.
14	1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources)
15	Making plinth protection 50mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
16	Centering and shuttering including strutting, propping etc. and removal of form for
17	Foundations, footings, bases of columns, etc. for mass concrete
18	Suspended floors, roofs, landings, balconies and access platform
19	Lintels, beams, plinth beams, girders, bressumers and cantilevers
20	Columns, Pillars, Piers, Abutments, Posts and Struts
21	Stairs, (excluding landings) except spiral-staircases
22	Weather shade, Chajjas, corbels etc., including edges
23	Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured).
24	Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)
25	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
26	Thermo-Mechanically Treated bars of grade Fe-500D or more.
27	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
28	Thermo-Mechanically Treated bars of grade Fe-500D or more.
29	Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand).
30	Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
31	All works upto plinth level Concrete of M30 grade with minimum cement content of 350 kg /cum
32	All works above plinth level upto floor V level Concrete of M30 grade with minimum cement content of 350 kg /cum
33	Add for using extra cement in the items of design mix over and above the specified cement content therein.
34	Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical localtion in load application areas that accommodates multi directional seismic movement without stress to it's components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self- centering arrangement that freely rotates / moves in all directions. The Self - centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in-Charge. (Material shall confirm to ASTM 6063).
35	Floor Joint of 100 mm gap
36	Providing and fixing of expansion joint system related with wall joint (internal/external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063).
37	Wall Joint of 100 mm gap
38	Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminum base members with, self aligning and self centering arragement support plates asper ASTM B221-02. The system shall be such that it provides watertight roof to roof/roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminum base member designed to accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063).
39	Roof Joint of 100 mm gap
40	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
41	Cement mortar 1:6 (1 cement : 6 coarse sand)
42	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
43	Cement mortar 1:6 (1 cement : 6 coarse sand)
44	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
45	Cement mortar 1:4 (1 cement :4 coarse sand)
46	Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand).
47	Providing and fixing stone jali 40 mm thick in approved design throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade etc. complete
48	Red sand stone
49	Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for staircase steps,riser, landings,kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels and preparation of surface etc complete
50	Granite stone slab of all colour and texture Area of slab over 0.50 sqm
51	Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
52	Granite work
53	Providing and fixing Ist quality ceramic glazed wall tiles (Size not less than 300 mm x 450 mm) conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades (light,dark and designer etc ) of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand),having below rough plaster of average 20 mm of 1:4 ( cement :4 coarse sand) for surface preparation and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
54	Providing and fixing aluminium body Cam Action Slide Channel Overhead hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment and 90 degree stop arrangement, of approved quality and make with necessary accessories and screws etc. complete.
55	Providing and fixing stainless steel tower bolts, ISI marked with necessary fiitingsand screws etc. complete :
56	Size 250x10 mm
57	Size 100x10 mm
58	Hook and eye 150 mm SS 304
59	Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete
60	Size 125 mm
61	Providing and fixing bright SS finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of strainless steel 304 lever handles of approved quality and make with necessary screws etc. complete.
62	Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
63	Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.
64	80x1.25 mm M.S. laths with 1.25 mm thick top cover
65	Providing and fixing ball bearing for rolling shutters.
66	Extra for providing mechanical device chain and crank operation for operating rolling shutters.
67	Exceeding 10.00 sqm and upto 16.80 sqm in the area
68	Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer-in- charge, (area of grill to be measured).
69	Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
70	Hot finished welded type tubes
71	Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
72	Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
73	Plate in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
74	Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
75	Providing and laying vitrified floor tiles with spacer in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
76	Glazed Vitrified tiles Matt/Antiskid finish of size 600x600 mm
77	Providing and laying Vitrified tiles in different sizes with spacer (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.
78	Glazed Vitrified tiles Matt/Antiskid finish of size 600x600 mm
79	Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.
80	Size of Tile 600x600 mm
81	Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
82	Granite stone slab of all colour and texture
83	12 mm cement plaster of mix with fibre mesh for jointing : including proper double scoffolding system upto height 15.00 mtr
84	1:6 (1 cement: 6 coarse sand)
85	15 mm cement plaster on rough side of single or half brick wall of mix with fibre mesh for jointing: including proper double scoffolding system upto height 15.00 mtr
86	1:6 (1 cement: 6 coarse sand)
87	Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:including proper double scoffolding system upto height 12.00 mtr
88	New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)
89	Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives,including proper double scoffolding system upto height 12.00 mtr
90	New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
91	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
92	Two or more coats on new work
93	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
94	Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria Tremix system of flooring involving all required operations such as potter/surface vibrator, vaccum dewatering with suction matts with electrical pumns, side guide channels for side shuttering, screed vibrator, power drowelling, broom finish to the top surface, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately.
95	Cement concrete prepared with batch mixing machine
96	Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements all complete as per direction of the Engineer-in-Charge.
97	Using grade 'A' sealing compound conforming to IS: 1834.
98	Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
99	Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.
100	80 mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern
101	Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe and cp health facuet, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
102	W.C. pan with ISI marked white solid plastic seat and lid
103	Providing and fixing wash basin with C.I. brackets and dash fastner, 15 mm C.P. brass pillar cock , 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :
104	White Vitreous China Wash basin size 550x400 mm with C.P. brass pillar basin mixer with central hole and long braided hoses
105	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
106	Semi rigid pipe 32 mm dia
107	Providing and fixing mirror of size 600x450 mm superior glass (of approved quality) and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing, fixed to wooden cleats with C.P. brass screws and washers complete.
108	Providing and fixing soil, waste and vent pipes :
109	100 mm dia Hubless centrifugally cast iron offsets epoxy coated inside & outside as per IS:15905
110	75 mm dia Hubless centrifugally cast iron offsets epoxy coated inside & outside as per IS:15905
111	Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete
112	100 mm dia Hubless centrifugally cast iron offsets epoxy coated inside & outside as per IS:15905
113	75 mm dia Hubless centrifugally cast iron offsets epoxy coated inside & outside as per IS:15905
114	Providing and fixing plain bend of required degree.
115	100 mm dia Hubless centrifugally cast iron offsets epoxy coated inside & outside as per IS:15905
116	75 mm dia Hubless centrifugally cast iron offsets epoxy coated inside & outside as per IS:15905
117	Providing and fixing terminal guard
118	100 mm Hubless centrifugally cast iron offsets epoxy coated inside & outside as per IS:15905
119	Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe
120	100 mm dia SS 304 grade coupling with EPDM rubber gasket
121	75 mm dia SS 304 grade coupling with EPDM rubber gasket
122	Providing and fixing Steel finished clamps with base holder plate with accessories etc complete for sand cast iron/ centrifugally cast (spun) iron pipes of diameter :
123	100 mm dia
124	75 mm dia
125	Providing and fixing P-trap / Floor trap of self cleansing design with screwed down or CP hinged grating with frame with or without hole, vent arm complete, including cost of cutting and making good the walls and floors :
126	100 mm inlet and 100 mm outlet Hubless centrifugally cast iron offsets epoxy coated inside & outside as per IS:15905
127	100 mm inlet and 75 mm outlet Hubless centrifugally cast iron offsets epoxy coated inside & outside as per IS:15905
128	Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.
129	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls and floor etc. Internal work - Exposed on wall including synthetic enamel paint of approved brand and manufacture of required colour to give an even shade
130	25 mm dia nominal bore
131	Providing and fixing G.I. Pipes complete with G.I. fittings and clamps,i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall
132	20 mm dia nominal bore
133	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling ,including painting with anti corrosive bitumastic paint and connection with main line with fillings etc complete
134	25 mm dia nominal bore
135	50 mm dia nominal bore
136	80 mm dia nominal bore
137	Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
138	25 to 40 mm nominal bore
139	50 to 80 mm nominal bore
140	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete
141	25 mm nominal bore
142	Providing and fixing uplasticised PVC connection pipe in SS finish with brass unions :
143	45 cm length & 15 mm nominal bore
144	Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work :
145	25 mm dia nominal bore
146	50 mm dia nominal bore
147	80 mm dia nominal bore
148	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :
149	20 mm nominal bore
150	25 mm nominal bore
151	50 mm nominal bore
152	80 mm nominal bore
153	Providing and placing on terrace (at all floor levels) polyethylene water torage tank,IS: 12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes with 03 nos tank nipples and the base suppport for tank & including providing and fixing 20mm dia ball valve (brass) of approved quality, High or low pressure, with plastic floats complete for each tank.including taking down existing pvc tank & deposited in store yard as per direction of Engineer in-Charge.
154	Providing and fixing C.P. brass bib cock with wall flange of approved quality conforming to IS:8931 as per direction by Engineer in charge.
155	15mm nominal bore.
156	Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 with wall flange as per direction by Engineer in charge
157	15mm nominal bore.
158	Cutting holes up to 30x30 cm in walls including making good the same:
159	with common burnt clay F.P.S. (non modular) bricks
160	Providing,laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints including trenching , refilling the same etc.complete :
161	100 mm diameter S.W.pipe
162	Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design :
163	100 mm diameter S.W.pipe
164	Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight FRP/GRP cover with frame of 300 x300 mm size (inside) the load capacity of cover to be not less than 12.5T as per standard design:
165	150 x 100 mm size P type without common burnt clay F.P.S (non modular ) bricks of class designation 7.5
166	Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
167	150 mm dia. R.C.C. pipe
168	250 mm dia. R.C.C. pipe
169	300 mm dia. R.C.C. pipe
170	Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
171	Inside size 90x80 cm and 45 cm deep including FRP cover with frame 455x610 mm internal dimensions, with 12.50T capcity of approved design and brand :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
172	Extra for depth for manholes :
173	Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
174	Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
175	Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :
176	For pipes 100 to 250 mm diameter
177	Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm FRP/GRP horizontal grating with frame of capacity 12.50T complete as per standard design :
178	With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
179	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
180	For fixed portion Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
181	For shutters of doors, windows & ventilators including providing and fixing strainless steel hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
182	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
183	With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
184	Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes,SS304 door handle 4 nos required size , Locking arrangements with necessary fittings etc complete for fixing required door fittings, all complete as per direction of Engineer-in-charge
185	Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
186	With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
187	Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.
188	All types of soil 300 mm dia
189	Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.
190	200 mm nominal size dia
191	Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
192	Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ≥ 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the Engineer-in-charge.
193	With 20 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.7)
194	Providing and fixing soil, waste and vent pipes as per directions of the Engineer-in-charge. : 150 mm dia Hubless centrifugally cast iron offsets epoxy coated inside & outside as per IS:15905
195	Providing and fixing plain bend of required degreeas per directions of the Engineer-in-charge. 150 mm dia Hubless centrifugally cast iron offsets epoxy coated inside & outside as per IS:15905
196	Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts completeas per directions of the Engineer-in-charge. 100 mm dia Hubless centrifugally cast iron offsets epoxy coated inside & outside as per IS:15905
197	Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe :150 mm dia SS 304 grade coupling with EPDM rubber gasket etc complete as per directions of the Engineer-in-charge.
198	Providing and Fixing 0.50 mm thick PVDF (Poly Vinylidene fluouride) of aluminium thickness 3.00 mm overall thickness 4.00 mm on walls,in doors & ceiling with proper required haging system and having fire rating of 120 minutes and fixing with silicon tape/ adhessive material as required ,in opening shutters and fixed sections including cutting PVDF sheet as per required at site, preparing smooth surface and making holes/making good as required cutting hoisting and fixing aluminium members etc. as directed by Engineer Incharge etc. complete
199	Cleanroom interior and Gas system :- Designing, providing, installing and fixing of Double skin modular clean room wall panels 100 mm thick, double skin 0.6 mm thick PPGI / PCGI sheet on both sides PUF (40 ± 2 kg/m³ density) as infill, Walls shall be fixed on floor runner and including all fittings such as Aluminium coving R 50 powder coated with aluminium back up angle,Aluminium 2D/3D Corner covings for all corners,cut out in wall for switch & socket with proper required finishing,C Channel powder coated,2 Way Aluminium coving powder coated with aluminium back up angle For outer wall etc complete of approved brand and design as per direction of Engineer-In-charge.. All joints to be filled with silicon sealant. Electrical conduit shall be embaded at panels for power sockets wherever required as per approved design of Engineer-In-charge. (price for conduit under separate head)
200	Designing, providing, installing and fixing of Clean room Ceiling (walkable) double skin false ceiling of 50 mm thick, as per approved colour from Enginner-In-Charge. double skin 0.5mm thick PPGI / PCGI sheet on both sides PUF (40 ± 2 kg/m³ density) as infill. Necessary supporting member GI tie rod, turn buckle, anchor fastener etc as per suitable arrangement/site rquirement, sealant deemed to be included in pricing and making cut out in ceiling for HEPA TERMINAL & T grid for Light fixture fixing with proper required finishing etc complete of approved brand and design as per direction of Engineer-In-charge.
201	Designing, providing, installing and fixing of 46 mm thick flush doors made of 0.8 mm thick PU Painted sheet with PUF as infill. 0.8 mm thick GPSP Powder coated as per approved colour from Enginner-In-Charge, door frames of 100 mm size , double glazed toughened glass view panel 400x600x5 mm, SS push plates, door closures , SS D Handles, Lock & key, SS Ball bearings butt hinges & Drop seal with all complete of approved brand and design as per direction of Engineer-In-charge.
202	Single Leaf Door 900 mm X 2100 mm
203	Double leaf Door 1500 mm X 2100 mm
204	Double leaf Door 1800 mm X 2100 mm
205	Emergency Door 2000 mm X 2100 mm with push bar handle
206	Designing, providing, installing and fixing of Clean room windows/ vision Panels of flush double glazed fixed to the partition panels with proper framing 100 mm size for the required sizes and quantity Tempered Glass thickness minimum 5 mm Window glazed, Extruded aluminium midline (V-shape) frame in powder baked ‘designer white’ finish and gasket with all complete of approved brand and design as per direction of Engineer-In-charge.
207	Size : As per approved design and drawing
208	Supply and laying of self levelling compound on PCC floor of 3.00 mm average thickness. Top of self levelling should have undulation of +/- 1 mm in per sqm area etc complete as per direction of Engineer-In-charge.
209	Supply and laying of 2.00 mm thick ESD Vinyl flooring in roll on conductive glue and copper strip below vinyl. Copper strip will be connected to mother earth through copper strip at few locations. All vinyl joints shall be fusion welded to make it monolithic etc complete as per direction of Engineer-In-charge.
210	Supply and laying of coving between floor and wall. Coving back up shall be of rubber material and top will be vinyl of same sheet as that of floor. Coving joint with wall panel shall be sealed with silicon sealant etc complete as per direction of Engineer-In-charge.
211	Providing and applying 3.00 mm thinkness epoxy self levelling flooring system in required shade and colour with semi glossy finish which consist of surface preparation, primer coat with epoxy based primer of approved brand and manufacturer, followed by 1.5 mm thick epoxy self levelling screed , epoxy self levelling with the help of notch trowel etc complete as per direction of Engineer-in-Charge.
212	Providing and applying Epoxy coving size 50x50mm in required shade and colour with semi glossy finish of approved brand and manufacturer etc complete as per direction of Engineer-in-Charge.
213	Designing, providing, installing and fixing Single entry Air shower fabricated with SS-304, 20G sheet for movement of single person with all complete with H13 HEPA Filter, Pre- filter, blowers, ss adjustable nozzles, SS grated floor, two doors with inter-locking arrangement timer with fully adjustable, fully automatic with electronic logic control. Air shower shall confirm to clean room class 100 at nozzle outlet etc complete as per direction of Engineer-in-Charge.
214	Designing, providing, installing and fixing of Static Pass Box made out of SS 304 with, door inter locks, UV light with UV light meter, electronic buzzer.Dimensions mentioned are internal sizes. 600 x 600 x 600 mm etc complete as per direction of Engineer-in-Charge.
215	Designing, providing, installing and fixing Dynamic Pass Box made of SS 316 working size approx 600 x 600 x 600 mm with HEPA filtered air supply, blower motor assembly, door,interlock, UV light, UV counter etc complete as per direction of Engineer-in-Charge.
216	Designing, providing, installing and fixing SS 304 shoe rack cum cross over bench made of 18 swg SS304 Dimensions:3500mm (L) x 300mm (W) x 650mm (H) matt finish etc complete as per direction of Engineer-in-Charge.
217	Designing, providing, installing and fixing Ventilated Garments cabinet hanging arrangement made of SS304 Suitable for 10 set of hangers etc complete as per direction of Engineer-in-Charge.
218	Designing, providing, installing and fixing Garments cubicle storage rack made of SS 304. Suitable for 10 set of garments etc complete as per direction of Engineer-in-Charge.
219	Designing, providing, installing and fixing MS painted Emergency shower and Eye wash station with hand operated shower and foot / elbow operated eye wash. The unit shall have a common water inlet and drain point etc complete as per direction of Engineer-in-Charge.
220	Supply, Installation, Testing and commissioning of gas supply panel for Ar with 3000 PSI input pressure to safely regulate the pressure of gas present in cylinder to the pressure required at point of use along with 1/2\\" input and 1/2\\" output. The gas supply panel consists of the following components: 1) Isolation valve 2) Vent arrangement 3) Pressure Regulator 4) Safety relief valve 5) inlet Filter - 0.5 um and outlet filters- 0.003um 6) Pressure gauges All these components are to be assembled on an SS304 plate inside a cleanroom environment. The panels will be undergo 5 step testing and validation process for pressure test, Helium leak test, Trace moisture test, Trace oxygen & particle count etc complete as per direction of Engineer-in-Charge.
221	Supply, Installation, Testing and commissioning of gas supply panel for He with 3000 PSI input pressure to safely regulate the pressure of gas present in cylinder to the pressure required at point of use along with 1/4\\" input and 1/4\\" output . The gas supply panel consists of the following components: 1) Isolation valve 2) Vent arrangement 3) Pressure Regulator 4) Safety relief valve 5) inlet Filter - 0.5 um and outlet filters- 0.003um 6) Pressure gauges All these components are to be assembled on an SS304 plate inside a cleanroom environment. The panels will be undergo 5 step testing and validation process for pressure test, Helium leak test, Trace moisture test, Trace oxygen & particle count etc complete as per direction of Engineer-in-Charge.
222	Supply, Installation, Testing and commissioning of gas supply panel for CF4 with 3000 PSI input pressure to safely regulate the pressure of gas present in cylinder to the pressure required at point of use along with 1/4\\" input and 1/4\\" output . The gas supply panel consists of the following components: 1) Isolation valve 2) Vent arrangement 3) Pressure Regulator 4) Safety relief valve 5) inlet Filter - 0.5 um and outlet filters- 0.003um 6) Pressure gauges All these components are to be assembled on an SS304 plate inside a cleanroom environment. The panels will be undergo 5 step testing and validation process for pressure test, Helium leak test, Trace moisture test, Trace oxygen & particle count etc complete as per direction of Engineer-in-Charge.
223	Supply, Installation, Testing and commissioning of gas supply panel for SF6 with 3000 PSI input pressure to safely regulate the pressure of gas present in cylinder to the pressure required at point of use along with 1/4\\" input and 1/4\\" output . The gas supply panel consists of the following components: 1) Isolation valve 2) Vent arrangement 3) Pressure Regulator 4) Safety relief valve 5) inlet Filter - 0.5 um and outlet filters- 0.003um 6) Pressure gauges All these components are to be assembled on an SS304 plate inside a cleanroom environment. The panels will be undergo 5 step testing and validation process for pressure test, Helium leak test, Trace moisture test, Trace oxygen & particle count etc complete as per direction of Engineer-in-Charge.
224	Supply, Installation, Testing and commissioning of gas supply panel for O2 with 3000 PSI input pressure to safely regulate the pressure of gas present in cylinder to the pressure required at point of use along with 1/2\\" input and 1/2\\" output. The gas supply panel consists of the following components: 1) Isolation valve 2) Vent arrangement 3) Pressure Regulator 4) Safety relief valve 5) inlet Filter - 0.5 um and outlet filters- 0.003um 6) Pressure gauges All these components are to be assembled on an SS304 plate inside a class 100 cleanroom environment. The panels will be undergo 5 step testing and validation process for pressure test, Helium leak test, Trace moisture test, Trace oxygen & particle count etc complete as per direction of Engineer-in-Charge.
225	Supply, Installation, Testing and commissioning of gas supply panel for N2 with 3000 PSI input pressure to safely regulate the pressure of gas present in cylinder to the pressure required at point of use along with 1/2\\" input and 1/2\\" output. This will be for exchlusive use for purging to Gases in cabinets. The gas supply panel consists of the following components: 1) Isolation valve 2) Vent arrangement 3) Pressure Regulator 4) Safety relief valve 5) inlet Filter - 0.5 um and outlet filters- 0.003um 6) Pressure gauges All these components are to be assembled on an SS304 plate inside a cleanroom environment along with SS316 purifier of size 1/4\\" for N2 supply panel and maximum flow rate of 75 LPM with a pressure range of 600 PSIG. The panels will be undergo 5 step testing and validation process for pressure test, Helium leak test, Trace moisture test, Trace oxygen & particle count etc complete as per direction of Engineer-in-Charge.
226	Gas Cabinets - Supply, Installation, Testing and commissioning of Gas cabinet for BCl3, NH3, SiH4, N2O, Cl2, PH3, GeH4, B2H6 with 3000 PSI input pressure for safely regulating the pressure of gas present in cylinder to the pressure required at point of use along with 1/4\\" input and 1/4\\" output for each gas. The gas cabinet consists of the following components in 08 Nos : 1) Isolation valve 2) Vent & purge arrangement 3) Pressure Regulator 4) Safety relief valve 5) inlet and outlet filters 6) Pressure gauges 7) Vacuum generator 8) Pressure transducer 9) Check valve 10) Emergency shut off valve 11) Excess flow switch 12) Restricted orifice 13) Sprinkler 14) Gas Leak Detector 15) ROR sensor 16) Exhaust Differential Pressure Switch 17)Non retrun valve 18)PLC Controller for the cabinets with HMI with all other necessary accessories like emergency shutdown etc complete. All these components are to be assembled on an SS304 plate inside a Class 100 cleanroom environment complying to SEMI standards along with 03 Nos SS316 purifier of size 1/4\\" for Cl2, BCl3, NH3 in gas cabinet with flow rate 2 LPM a pressure range of 800 PSIG. The gas panels will be mounted inside an enclosure that is constantly exhausted and monitored. The gas cabinet will house a gas specific self- suction type gas leak detector. The enclosure shall be made of cold rolled sheet and have a explosion proof glass for viewing the panels. The panels will be undergo 5 step testing and validation process for pressure test, Helium leak test, Trace moisture test, Trace oxygen & particle count. Each Gas cabinet shall be for single cylinder for the respective speciality gases. Each cabinet shall have provision for purging etc complete as per direction of Engineer-in-Charge.
227	Supply, Installation, Testing and commissioning of Gas cabinet for H2 with 3000 PSI input pressure for safely regulating the pressure of gas present in cylinder to the pressure required at point of use along with 1/4\\" input and 1/4\\" output . The gas cabinet consists of the following components: 1) Isolation valve 2) Vent & purge arrangement 3) Pressure Regulator 4) Safety relief valve 5) inlet and outlet filters 6) Pressure gauges 7) Vacuum generator 8) Pressure transducer 9) Check valve 10) Emergency shut off valve 11) Excess flow switch 12) Restricted orifice 13) Sprinkler 14) Gas Leak Detector 15) ROR sensor 16) Exhaust Differential Pressure Switch 17) Non retrun valve 18) PLC Controller for the cabinets with HMI with all other necessary accessories like emergency shutdown etc complete.All these components are to be assembled on an SS304 plate inside a Class 100 cleanroom environment complying to SEMI standards. The gas panels will be mounted inside an enclosure that is constantly exhausted and monitored. The gas cabinet will house a gas specific self- suction type gas leak detector. The enclosure shall be made of cold rolled sheet and have a explosion proof glass for viewing the panels. The panels will be undergo 5 step testing and validation process for pressure test, Helium leak test, Trace moisture test, Trace oxygen & particle count etc complete as per direction of Engineer-in-Charge.
228	Heating Jacket Supply, Installation and testing of heating jacket for supplied BCl3 and NH3 cylinder etc complete as per direction of Engineer-in-Charge.
229	Gas Detector - Supply, Installation and testing of gas detector in Cleanroom for BCl3, NH3, SiH4, N2O, Cl2, H2 Gas at point of use etc complete as per direction of Engineer-in-Charge.
230	Point of use sticks - Supply, Installation and testing of 1/4\\" point of use stick including the following: - Pressure regulator etc complete as per direction of Engineer-in-Charge.
231	Flash Back arrestor Supply, Installation, and testing of point of flash pack arrestor for Oxygen gas supply panel and Hydrogen gas cabinet. MOC: BRASS INLET: 1/4 NPT FEMALE OUTLET: 1/4 NPT FEMALE SAFETY ELEMENTS : FA,NV, TV 105\\"C Pressure 10 Bar etc complete as per direction of Engineer-in-Charge.
232	Supply, Installation, and testing of the SS316 purifier of size 1/4\\" for N2 supply panel. The maximum flow rate of 75 LPM with a pressure range of 600 PSIG etc complete as per direction of Engineer-in-Charge.
233	Heat Tracing Cable - Supply, Installation, and testing of point of heat tracing for NH3 and BCl3 gas cabinet and tube for maintaining temperature at 40 °C etc complete as per direction of Engineer-in-Charge.
234	Co- axial pressure swtich - Supply, Installation, and testing of Co- axial pressure swtich consisting of Pressure Switch- Diaphragm valves- VCR gland with nut & gasket.-VCR blind nut- Fittings etc complete as per direction of Engineer-in-Charge.
235	SS316L EP Tubing - Supply, Installation, Testing, and commissioning of SS316L electropolished Tubes of 1/4\\" Upon installation completion, the tubes shall undergo 5 step testing and validation etc complete as per direction of Engineer-in-Charge. The steps are : - Pressure hold test ( 0 psi drop over 24 hours). - Helium Leak check 10 -9 mbar l/sec - Trace oxygen < 10 ppm - Trace moisture ppm< 10 - Trace particle < 0.1 micron
236	Supply, Installation, Testing, and commissioning of SS316L electropolished Tubes of 1/2\\" for N2, Ar, O2 gas headers Upon installation completion, the tubes shall undergo 5 step testing and validation. The steps are : - Pressure hold test ( 0 psi drop over 24 hours). - Helium Leak check 10 -9 mbar l/sec - Trace oxygen < 10 ppm - Trace moisture < 10 ppm - Trace particle < 0.1 micron etc complete as per direction of Engineer-in-Charge.
237	Co-axial EP Tube - Supply, Installation, and testing of Coaxial Tubes of 1/4\\" X 1/2\\" along with associated fittings. Upon installation completion, the tubes shall undergo 5 step testing and validation. The steps are: - Pressure hold test ( 0 psi drop over 24 hours) - Helium leak check ( 10^-9 mbar l/sec) - Trace oxygen ( <1ppm) - Trace moisture ( <1ppm) - Trace Particle ( <0.1 micron) etc complete as per direction of Engineer-in-Charge.
238	Oil Free Air Compressor - Supply, Installation, Testing, and commissioning of Air cooled oil free reciprocating compressor with Desiccant Drier & particle filter to achieve dew point of ADP (-40)°C and 24 m3/hr ( 400 l/min @ 10 bar) etc complete as per direction of Engineer-in-Charge.
239	Dryer with filter for CDA - Supply, Installation, Testing, and commissioning of Desiccant type drier with filter for CDA. Heatless and heat regenerative dryer that works on pressure swing adsorption or thermal swing adsorption. Must be capable of operating above 12 bar @400lpm. Should be of vertical design with minimum pressure drop. Should include an equivalent controller and auto drain. Pressure dew point of (-) 40°C to be attained using this drier. Coalescing filters for the removal of dirt, oil and water (Liquid, aerosol & vapour form), made of activated carbon and borosilicate microfiber material. Three stage filtration is required using 5 um filter, fine filter 1um and micro filter .01um as well as 0.01um activated carbon filter. Must be suitable for use above 400L/min @12 bar etc complete as per direction of Engineer-in-Charge.
240	Providing and installing 200L Storage tank, MOC - SS with Pressure gauge, auto drain, isolation valve, Relief valve etc complete as per direction of Engineer-in-Charge.
241	SS Ball Valves Supply, Installation, Testing and commissioning of stainless-steel ball valve of 1/2\\" etc complete as per direction of Engineer-in-Charge.
242	Supply, Installation, Testing and commissioning of stainless-steel ball valve of 1/4\\" etc complete as per direction of Engineer-in-Charge.
243	Pressure regulator - Pressure regulator with in & out pressure gauges NPT end-1/2\\" etc complete as per direction of Engineer-in-Charge.
244	SS316L BA Tube - Supply, Installation and testing of SS 316L BA Tubes of 1/4\\" Upon installation completion, the tubes shall undergo 5 step testing and validation. The steps are : - Pressure hold test ( 0 psi drop over 24 hours). - Helium Leak check 10 -9 mbar l/sec - Trace oxygen < 10 B168ppm - Trace moisture < 10 ppm - Trace particle < 0.1 micron etc complete as per direction of Engineer-in-Charge.
245	Supply, Installation and testing of SS 316L BA Tubes of 1/2\\" Upon installation completion, the tubes shall undergo 5 step testing and validation. The steps are : - Pressure hold test ( 0 psi drop over 24 hours). - Helium Leak check 10 -9 mbar l/sec - Trace oxygen < 10 ppm - Trace moisture < 10 ppm - Trace particle < 0.1 micron etc complete as per direction of Engineer-in-Charge.
246	Deionized water unit - Supply, installation, testing and commissioning of DI system should be: Resistivity at 25C should be 18.2 Megaohm-cm Total Organic Carbon (TOC) < 5 ppb Dispense rate should be up to 2 l/min DI storage tank of 50 litres (PPH) RO storage Tank - 200 Litres (PP) Flow capacity 2 LPM etc complete as per direction of Engineer-in-Charge.
247	Ball Valve Supply, installation, testing and commissioning of threaded end, PN 10 high purity PPH ball valve. 25mm etc complete as per direction of Engineer-in-Charge.
248	Supply, installation, testing and commissioning of threaded end, PN 8 high purity UPVC ball valve 1/2\\" etc complete as per direction of Engineer-in-Charge.
249	PPH 3 way diaphragm valve Supply, installation, testing and commissioning of threaded end, PN 10 high purity PPH 3 way diaphragm valve of size 1\\" x 1/2\\" x 1\\" etc complete as per direction of Engineer-in-Charge.
250	PPH Pipe Supply, installation, testing and commissioning of PN 10 High purity PPH pipe of 25mm etc complete as per direction of Engineer-in-Charge.
251	Supply, installation, testing and commissioning of PN 10 High purity PPH pipe of 15mm etc complete as per direction of Engineer-in-Charge.
252	UPVC Pipe Supply, installation, testing and commissioning of PN 6 high purity UPVC pipe of 25mm etc complete as per direction of Engineer-in-Charge.
253	Supply, installation, testing and commissioning of PN 6 high purity UPVC pipe of 15mm etc complete as per direction of Engineer-in-Charge.
254	Guns Supply, installation, testing and commissioning of DI water PPH gun of 1/2\\" etc complete as per direction of Engineer-in-Charge.
255	General Exhaust Blower Supply and Installation of SISW centrifugal low noise level Blower housing shall be made of PPFRP. Pedestal and base frame of blowers is M.S epoxy painted/powdered coated. Impeller with dynamic balancing. Motor make CG/ABB. (IE2) 4500 m3/hr @ 150mmwg (1 Working + 1 Standby ) etc complete as per direction of Engineer-in-Charge.
256	Wet Scrubber - Supply and installation of Vertical type wet scrubber with liquid recirculation tank, recirculation pump dosing tank & dosing pump, PH sensor with the transmitter, exhaust sensor, differential pressure switch, exhaust blower (1w+ 1s) of the static pressure of 200mmwg and stack. Material: PP-FRP, Pressure drop across the scrubber column should be below 50mm wg (approx.), The design velocity for the scrubber column shall be 1.5 m/s. Interconnection piping between the scrubber, Re-circulation tank, and Dosing tank shall be considered. complete with makeup water connection with control valve, water level indicator, drain with control valve, overflow pipe, scrubber recirculation pump without Mechanical seal, inlet flange connection with 'Y' Strainer, outlet flanged connections with nonreturn valve (NRV), Ball valve with gaskets & bolt nuts, single stage PP packing rings. The blower stack shall be 7M in height. liquid spray nozzle system , Including Dosing Plug with Valve, Mounting Bolt & Nuts with Anti Vibration Pads,. Scrubber Pump of suitable motor rating, 3phase 50Hz, 415Volts. Including all pumps cover, Ladders etc complete as per direction of Engineer-in-Charge.
257	Solvent Scrubber Supply and installation of Vertical type Solvent scrubber with liquid recirculation tank, recirculation pump dosing tank & dosing pump, PH sensor with the transmitter, exhaust sensor, differential pressure switch, exhaust blower (1w+ 1s) of the static pressure of 200mmwg and stack. Material: PP-FRP, Pressure drop across the scrubber column should be below 50mm wg (approx.), The design velocity for the scrubber column shall be 1.5 m/s. Interconnection piping between the scrubber, Re-circulation tank, and Dosing tank shall be considered. complete with makeup water connection with control valve, water level indicator, drain with control valve, overflow pipe, scrubber recirculation pump without Mechanical seal, inlet flange connection with 'Y' Strainer, outlet flanged connections with nonreturn valve (NRV), Ball valve with gaskets & bolt nuts, single stage PP packing rings. The blower stack shall be 7M in height. liquid spray nozzle system , Including Dosing Plug with Valve, Mounting Bolt & Nuts with Anti Vibration Pads,. Scrubber Pump of suitable motor rating, 3phase 50Hz, 415Volts. Including all pumps cover, Ladders etc complete as per direction of Engineer-in-Charge.
258	PP - FRP Ducts Supply, installation, testing and commissioning of PP/FRP duct of 3mm PP thickness & 3mm FRP thickness, of below diameters for Acidic exhaust and general exhaust system etc complete as per direction of Engineer-in-Charge.
259	Supply, installation, testing and commissioning of PP/FRP duct of 3mm PP thickness & 3mm FRP thickness, ID 3\\" etc complete as per direction of Engineer-in-Charge.
260	Supply, installation, testing and commissioning of PP/FRP duct of 3mm PP thickness & 3mm FRP thickness, ID 4\\" etc complete as per direction of Engineer-in-Charge.
261	Supply, installation, testing and commissioning of PP/FRP duct of 3mm PP thickness & 3mm FRP thickness, ID 6\\" etc complete as per direction of Engineer-in-Charge.
262	Supply, installation, testing and commissioning of PP/FRP duct of 3mm PP thickness & 3mm FRP thickness, ID 8\\" etc complete as per direction of Engineer-in-Charge.
263	Supply, installation, testing and commissioning of PP/FRP duct of 3mm PP thickness & 3mm FRP thickness, ID 12\\" etc complete as per direction of Engineer-in-Charge.
264	Non return valves
265	Supply, installation, testing and commissioning of PP non return valve with flanges and other accessories of 12\\" etc complete as per direction of Engineer-in-Charge.
266	Supply, installation, testing and commissioning of PP non return valve with flanges and other accessories of 8\\" etc complete as per direction of Engineer-in-Charge.
267	PP - FRP Dampers
268	Supply, installation, testing and commissioning of PPFRP volume control damper with flanges and other accessories of 3\\" etc complete as per direction of Engineer-in-Charge.
269	Supply, installation, testing and commissioning of PPFRP volume control damper with flanges and other accessories of 4\\" etc complete as per direction of Engineer-in-Charge.
270	Supply, installation, testing and commissioning of PPFRP volume control damper with flanges and other accessories of 6\\" etc complete as per direction of Engineer-in-Charge.
271	Supply, installation, testing and commissioning of PPFRP volume control damper with flanges and other accessories of 8\\" etc complete as per direction of Engineer-in-Charge.
272	Supply, installation, testing and commissioning of PPFRP volume control damper with flanges and other accessories of 12\\" etc complete as per direction of Engineer-in-Charge.
273	DRAIN SYSTEM
274	Storage Tank for Acid drain -Supply, installation of 200 liter PP / FRP tank (pp 3 mm and FRP 3 mm thick) storage tank for Acid drain collection Tank should have a float Valve etc complete as per direction of Engineer-in-Charge.
275	Sprinkler system for Gas Cabinet
276	Storage Tank-Supply, installation, and testing of 1000 liter triple layer Syntex water storage tank with make-up connection, Outlet Connection and drain connection. Tank also should have a float Valve and low-level switch and a Stand for mounting the tank. Required for sprinkler system for the gas cabinets etc complete as per direction of Engineer-in-Charge.
277	Centrifugal Pump Supply, Installation, testing, and commissioning of horizontal split casing type centrifugal pump-motor sets of 60GPM @ 100 m WC capacity complete with nitrile rubber insulation, VFD compatible electrical motor, with pressure transmitter and control panel with starter and other associated standard accessories etc complete as per direction of Engineer-in-Charge.
278	GI Piping Supply, installation, testing and commissioning of GI piping of following sizes & C class for chilled water system complete with all required flanges, fittings, gaskets, fasteners, Nitrile rubber insulation covered with aluminium cladding and supports etc. NB 20 mm class C etc complete as per direction of Engineer-in-Charge.
279	Ball valve/ Drain valve Supply, installation, testing and commissioning of threaded end, PN 16/class-150, CI ball valves of following sizes for chilled water system complete with all required nipples, fittings, Nitrile rubber insulation covered with aluminium cladding etc complete as per direction of Engineer-in-Charge.
280	Non Return valve Supply, installation, testing and commissioning of threaded end, PN 16/class-150, CI NRV of following sizes for chilled water system complete with all required nipples, fittings, Nitrile rubber insulation covered with aluminium cladding etc complete as per direction of Engineer-in-Charge.
281	Electrical work :- cleanroom compatible Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
282	Group C (Irrespective of any length)
283	Supplying and fixing cleanroom compatible following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
284	10 amp Switch
285	6 amp socket
286	6 amp 2 pin socket
287	Wiring cleanroom compatible for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required
288	Supplying and fixing cleanroom compatible following size/ modules, GI box alongwith modular base, cover & blanking plate for modular switches in recess etc. as required. etc as required.
289	1 or 2 Module (75mmX75mm)
290	3 Module (100mmX75mm)
291	8 Module (125mmX125mm)
292	Supplying and fixing cleanroom compatible following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
293	Telephone socket outlet RJ 11
294	Supplying & Fixing cleanroom compatible of 3Pin, 5Amp. Ceiling rose on juction box with provinding round phinolic sheet, including making connections etc. as required.
295	Supplying and fixing of cleanroom compatible suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch,after removing recessed existing board, disconnection making connections and testing etc. as required.
296	Supplying and fixing of cleanroom compatible suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 Nos. 3pin, 6 amps modular socket outlet with 1 No. 16 amp moduler switch and 1No. 6 pin 5/6 & 15/16 amps modular socket with 1no 16 amp moduler switch, blanking ,connection, painting etc. as required (different in colour of cover plate from general power for UPS / computer applications), making good the wall with matching colour distemper/ white wash etc. as required.
297	Supplying and fixing of cleanroom compatible suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 modular socket outlet and 10 A modular switch,after removing recessed existing board, disconnection making connections and testing etc. as required.
298	Supplying & fixing cleanroom compatible following amps rating, 240 volts, \\"C\\" curve, MCB suitable for inductive load of folloing pole with suitable size MCB box encloser with complete with connections, testing and commissioning etc. as required.
299	32 amp Double Pole with encloser
300	32 amp Four Pole with encloser
301	63 amp Four Pole with encloser
302	Supplying and fixing of cleanroom compatible 32 A, 415 V, TPN (3P+N+E)Industrial type socket outlet, with 4 pole and earth plug top alongwith 32 A \\"C\\" curve, TP MCB, Housing made of self-extinguishing polymer/ sheet steel enclosure, on surface or in recess, cover for the socket out let and complete with connections, testing and commissioning etc. as required
303	Supplying and fixing of cleanroom compatible 32 A, 240 V, SPN (3P) Industrial type socket outlet, with 2 pole and earth plug top alongwith 32 A \\"C\\" curve, DP MCB, Housing made of self-extinguishing polymer/ sheet steel enclosure, in recess, cover for the socket out let and complete with connections, testing and commissioning etc. as required
304	Supplying and fixing of cleanroom compatible 63A, 415 V, TPN (3P+N+E) Industrial type socket outlet, with 4 pole and earth plug top alongwith 63 A \\"C\\" curve, TP MCB, Housing made of self-extinguishing polymer/ sheet steel enclosure, on surface or in recess, cover for the socket out let and complete with connections, testing and commissioning etc. as required
305	SITC of cleanroom compatible MCCB in CRCA sheet steel enclosure complete with four pole Moulded Case Circuit Breaker (Ics Value 18KA), Adjustable Thermal & Fixed Magnetic setting, suitable for incoming & outgoing termination including powder coating etc. complete as per specification & as required.
306	125 Amp FP MCCB.
307	63 Am FP MCCB
308	Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray with cover (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
309	600 mm width X 62.5 mm depth X 2.0 mm thickness
310	450 mm width X 62.5 mm depth X 2.0 mm thickness
311	300 mm width X 62.5 mm depth X 2.0 mm thickness
312	100 mm width X 50 mm depth X 1.6 mm thickness
313	150 mm width X 50 mm depth X 1.6 mm thickness
314	Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \\"bends\\" with cover (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
315	600 mm width X 62.5 mm depth X 2.0 mm thickness
316	450 mm width X 62.5 mm depth X 2.0 mm thickness
317	300 mm width X 62.5 mm depth X 2.0 mm thickness
318	100 mm width X 50 mm depth X 1.6 mm thickness
319	150 mm width X 50 mm depth X 1.6 mm thickness
320	Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \\"Tee\\" with cover (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient with G.I. suspenders including G.I. bolts & nuts, etc. as required
321	600 mm width X 62.5 mm depth X 2.0 mm thickness
322	450 mm width X 62.5 mm depth X 2.0 mm thickness
323	300 mm width X 62.5 mm depth X 2.0 mm thickness
324	100 mm width X 50 mm depth X 1.6 mm thickness
325	150 mm width X 50 mm depth X 1.6 mm thickness
326	Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \\"Cross memberwith cover\\" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required
327	600 mm width X 62.5 mm depth X 2.0 mm thickness
328	450 mm width X 62.5 mm depth X 2.0 mm thickness
329	300 mm width X 62.5 mm depth X 2.0 mm thickness
330	100 mm width X 50 mm depth X 1.6 mm thickness
331	150 mm width X 50 mm depth X 1.6 mm thickness
332	Supplying and installing cleanroom compatible following size of perforated Hot Dipped Galvanised Iron cable tray \\"Reducer with cover\\" (galvanisation not less than 50 microns) with perforation not more than17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.
333	600 mm width X 62.5 mm depth X 2.0 mm thickness
334	450 mm width X 62.5 mm depth X 2.0 mm thickness
335	300 mm width X 62.5 mm depth X 2.0 mm thickness
336	150 mm width X 50 mm depth X 1.6 mm thickness
337	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. sections, joined with connectors, suspended from the ceiling
338	2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
339	4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire
340	2 X 4 sq. mm + 1 X 4 sq. mm earth wire
341	4 X 4 sq. mm + 2 X 4 sq. mm earth wire
342	2 X 6 sq. mm + 1 X 6 sq. mm earth wire
343	4 X 6 sq. mm + 2 X 6 sq. mm earth wire
344	4 X 10 sq. mm + 2 X 6 sq. mm earth wire
345	Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required.
346	2 x 1.5 Sq. mm
347	3 x 1.5 Sq. mm
348	4 x 1.5 Sq. mm
349	5 x 1.5 sq. mm
350	6 x 1.5 Sq. mm
351	Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
352	2 Pair
353	Supply installation and testing and commissioning of follwing size of Telephone distribution board in a M.S. box with hinged cover/ door complete with krone type tag block with double jumpering facility mounted on a bakelite sheet etc. including terminations of cable as required.
354	50 Pair telephone distribution board
355	Supply of follwing sizes of 0.61mm/.50mm diameter annealed tinned copper conductor PVC insulated and PVC sheathed armoured telephone cable conforming to ITDS/WS-113C & 114 on existing cable tray and or surface or existing surface/ recess steel conduit complete as required.
356	20 Pair
357	Laying and fixing of one number Telephone armoured cable (PVC insulated and PVC sheathed/XLPE power cable ) of 1.1 KV grade of following sizes direct in ground including excavation, sand cushioning protective covering and refilling the trench etc. as required.
358	20 Pair
359	Laying and fixing of one number Telephone armoured cable (PVC insulated and PVC sheathed/XLPE power cable ) of 1.1 KV grade of following sizes on wall surface as required.
360	20 Pair (Clamped with 1mm thick saddle)
361	Supplying & Fixing of following sizes of steel conduit along with heavy duty accessories, junction box etc. in surface / recesse including painting in case of surface conduit, or cutting the wall, repair and making good the same as required.
362	20 mm
363	25 mm
364	32 mm
365	Supplying and drawing of 23 AWG UTP Data Cable (CAT 6) gigaspeed LAN Cable in the existing surface/ recessed Steel/ under floor trunking as required.
366	1 run of cable
367	P & F of cleanroom compatible following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts Simplex Faceplate with RJ-45, information outlet with shutter with colour coding on existing modular plate, including making connections testing etc. as required
368	Light and Fan
369	Supply of following sizes of BLDC energy saver ( 5 star rated) ceiling fan without regulator complete with double ball bearing, motor, blades, down rod, canopy, etc. complete as required.
370	Size 1400 mm.
371	Installation, testing and commissioning of ceiling fan, including wiring the down rods of length upto 30 cm with 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc. complete as required.
372	P & F 18 swg M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . All as per pre approved by Engineer in charge.
373	Supplying of recessed mounted 36 Watt full glow, slim energy efficient, Green Square 2'x2' LED 110 lu/w, 6500 K lighting luminaires approved make complete with hanging arrengment all accessories, metallic CRCA powder coated housing etc. complete as required.
374	Supplying of recessed mounted 36 Watt full glow, slim energy efficient, PIR based 2'x2' LED lighting luminaires with THD 10% (+5% ) <, Efficiency > 90 % , oprating voltage 140-270V, body made of CRCA approved make complete with hanging arrengment all accessories, metallic CRCA powder coated housing with OEM 3 year Guarantee etc. complete as required.
375	Installation, testing and commissioning of above LED tube light fittings complete with all accessories on surface of wall/ ceiling or suspended from ceiling including providing hanging arrengment , transperent/suitable connection wire/ 1.5Sq.mm FR PVC copper conductor etc. as required.
376	Supplying of surface mounted of 75 watt, flood Light efficency 110 lm/W, 6500K, IP66/ IK08, input voltage 140-270V, 50Hz, oprating temprature -10⁰C to 45⁰C (Ta45⁰C), material- Housing: Aluminum Die-casting Cover: Tempered glass of high transmittance Lens: PC with BIS Certification LED Flud Light with approved make.
377	Installation, testing and commissioning of above LED Flood light fittings complete with all accessories on surface of wall/ ceiling or suspended from ceiling including providing hanging arrengment, U clamp , suitable connection wire/ 1.5Sq.mm FR PVC copper conductor etc. as required.
378	Design, supply, installation, fixing, and testing of the complete surface mounted 36 Watt full glow, energy efficient monochromatic yellow colour Teardrop Cleanroom compatible LED Light with hanging arrangment like T-Grid slot etc, oprating voltage 220-240V, 105 Lum/w, Ingress protection IP40 [Wire-protected], Fixation material Stainless steel, Overall length 1100 mm approved make complete with fixing arrengment all accessories, with OEM 2 year Guarantee etc. complete as required.
379	Design, supply, installation, fixing, and testing of the complete surface mounted 36 Watt full glow white fluorescent white CCT 5700 K colour Tear Drop Cleanroom compatible LED light 40W with hanging arrangment like T-Grid slot, oprating voltage 220-240V, 105 Lum/w, Ingress protection IP40 [Wire-protected], Fixation material Stainless steel, Overall length 1100 mm approved make complete with fixing arrengment all accessories, with OEM 2 year Guarantee etc. complete as required.
380	Supplying of Surface / Ceiling mounted LED light fixture-145 x 1200mm, 30/32 W Cool White Smart Brite Surface Light, 6500 K with approved make including, connection wire of suitable length, all accessories etc. as required.
381	Supplying of Surface / Ceiling mounted LED Batten, extruuded Aluninium housing light fixture- 1127 x 40 x46mm, 40 W Cool White Smart Brite Surface Light, 6500 K, 105lm/w, safty class II, input volatge 220-240 V, Ingress protection IP20 connection wire of suitable length, all accessories etc. as required.
382	Installation, testing and commissioning of above LED tube light fittings complete with all accessories on surface of wall/ ceiling or suspended from ceiling including providing 1.5Sq.mm FR PVC copper conductor etc. as required.
383	Supplying and installation of surface mounted 18 Watt full glow, energy efficient, circuler LED lighting luminaires, 6500K, Housing Material Aluminium pressure die cast, approved make complete with fixing arrengment all accessories, ABS/metallic CRCA powder coated housing etc. complete with installation as required.
384	SITC of wall/ surface mounted dust and vermin SMC Junction box (200 x 140 x 95) with 4 Point connector and 6 amp MCB approved make with mcb Din rail detachable gland plate, locking arrangement for equipment/ switchgear
385	P & F of heavy duty capacitor start Exhaust fan Size-300 mm sweep, 900 RPM, single phase, IS: 2312 marked of approved make in existing opening including grouting of metal fastener with bolts, nuts making connections , testing etc. as reqd.
386	P & F of heavy duty capacitor start Exhaust fan Size-380 mm sweep, 1400 RPM, single phase, IS: 2312 marked of approved make in existing opening including grouting of metal fastener with bolts, nuts making connections , testing etc. as reqd.
387	P & F of gravity louver shutter of superior quality made out of frame of 18 SWG MS sheet & louvers made from 24 swg Al. sheet with nut bolts enamel paint etc as required. Size Up to 380mm. ( for 300 mm and 380mm Exhaust Fan)
388	Supply of XLPE insulated PVC sheathed 1.1 kv. Grade Cu./Al. conductor armoured Cable IS: 7098 Part-1 of approved make.
389	4 X 6 Sqmm Cu.. Cable
390	3 X 10 Sqmm Cu.. Cable
391	4 X 10 Sqmm Cu.. Cable
392	4 X 16 Sqmm Cu.. Cable
393	4 X 25 Sqmm Cu.. Cable
394	3.5 X 35 Sqmm Cu.. Cable
395	3.5 X 50 Sqmm Cu.. Cable
396	3.5 X 95 Sqmm Cu.. Cable
397	3.5 X 240 Sqmm Cu. Cable
398	3 X 10 Sqmm Al.. Cable
399	3.5 X 300 Sqmm Al. Cable
400	3.5 X 400 Sqmm Al. Cable
401	Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
402	Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (upto 180 CM below ground level as required) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
403	63 mm dia (OD-63 mm & ID-51 mm nominal)
404	90 mm dia (OD-90 mm & ID-76 mm nominal)
405	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing existing RCC/HUME/ METAL /GI /CI /Stoneware/DWC pipe/ masonary Open Duct/ cable tray/ open in air as required.
406	Upto 35 sq. mm
407	Above 35 sq. mm and upto 95 sq. mm
408	Above 185 sq. mm and upto 400 sq. mm
409	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade on wall/ roof/ shaft including fixing by means of screws & rag bolts, suitable size MS U clamps complete as per specifications, repairing works etc as reqd. of following sizes of cables.
410	upto 35 Sqmm.(clamped with 1mm thick saddle)
411	above 35 sqmm upto 95 Sqmm.(clamped with 1mm thick saddle)
412	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
413	Above 185 sq. mm and upto 400 sq. mm
414	Supply& making one end termination with heavy duty single compression brass gland SIBG type, aluminium/ copper lugs duly crimped with crimping tool, PVC tape etc. for following size of XLPE insulated & PVC sheathed aluminium/ copper cable of 1.1 KV grade as required.
415	2 X 6 sq. mm
416	3 X 10 sq. mm
417	4 X 10 sq. mm
418	4 X 16 sq. mm
419	4 X 25 sq. mm
420	3½ X 35 sq. mm
421	3½ X 50 sq. mm
422	3½ X 95 sq. mm
423	3½ X 240 sq. mm
424	3½ X 300 sq. mm
425	3½ X 400 sq. mm
426	Supply of HT cable of 11 KV grade (earthed) stranded compact circular aluminium conductor, condutctor screen with extruded semi conductor compound, XLPE insulated, insulation screening with extruded semi conductor compound in combination with copper tape (0.3 KA for 1 sec), cores laid up, inner sheath of PVC tape, galvanized steel flat strip armoured, overall PVC Sheathed cable confirming to IS 7098 (Part II) 1985 (amended upto date) of following size
427	3 Core, 240 Sq.mm.
428	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground below 1.2mtr. including excavation, sand cushioning, protective covering and refilling the trench etc as required.
429	Above 120 sq. mm and upto 400 sq. mm
430	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/HUME/ METAL pipe as required.
431	Above 120 sq. mm and upto 400 sq. mm
432	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing masonry open duct as required.
433	Above 120 sq. mm and upto 400 sq. mm
434	Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :
435	240 sq. mm
436	Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :
437	240 sq. mm
438	Supplying and fixing of ,4 Way three pole and neutral, prewired, sheet steel, per phase isolation ( PPI ) MCB distribution board, 415 volts on surface / recess, complete with loose wire box, Incomer 1No. 63A, 4 Pole isolator, Outgoings- 3Nos. DP RCCB 40A, 240 volts, having a sensitivity current 30 milliamperes, 12 Nos. SP AC MCB-32A, 10KA, 240V ( 'C' curve ), terminal blocks, duly prewired with suitable size FRLS PVC insulated copper conductor upto terminal blocks, tinned copper bus bar, seperate neutral links for each phase, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted, making internal DB terminations with copper lugs including all the existing incoming/ outgoing connections, earthing, testing, repair & making good the wall with matching colour distemper/ white wash etc. as required.
439	Supplying and fixing of ,4 Way three pole and neutral, prewired, sheet steel, per phase isolation ( PPI ) MCB distribution board, 415 volts on surface / recess, complete with loose wire box, Incomer 1No. 63A, 4 Pole isolator, Outgoings- 3Nos. DP RCCB 40A, 240 volts, having a sensitivity current 30 milliamperes, 12 Nos. SP AC MCB-10A, 10KA, 240V ( 'C' curve ), terminal blocks, duly prewired with suitable size FRLS PVC insulated copper conductor upto terminal blocks, tinned copper bus bar, seperate neutral links for each phase, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted, making internal DB terminations with copper lugs including all the existing incoming/ outgoing connections, earthing, testing, repair & making good the wall with matching colour distemper/ white wash etc. as required.
440	Supplying and fixing of ,6 Way three pole and neutral, prewired, sheet steel, per phase isolation ( PPI ) MCB distribution board, 415 volts on surface / recess, complete with loose wire box, Incomer 1No. 100A, 4 Pole isolator, Outgoings- 3Nos. DP RCCB 63A, 240 volts, having a sensitivity current 30 milliamperes, 18 Nos. SP AC MCB-32A, 10KA, 240V ( 'C' curve ), terminal blocks, duly prewired with suitable size FRLS PVC insulated copper conductor upto terminal blocks, tinned copper bus bar, seperate neutral links for each phase, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted, making internal DB terminations with copper lugs including all the existing incoming/ outgoing connections, earthing, testing, repair & making good the wall with matching colour distemper/ white wash etc. as required.
441	Supplying and fixing of ,12 Way SPN, MCB distribution board, 240 volts on surface / recess, complete with loose wire box, Incomer 1No. 40A, DP isolator, Outgoings- 1No. DP RCCB 40A, 240 volts, having a sensitivity current 30 milliamperes, 8 Nos. SP AC MCB-32A, 10KA, 240V ( 'C' curve ), terminal blocks, duly prewired with suitable size FRLS PVC insulated copper conductor, tinned copper bus bar, seperate neutral links for phase, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted, making internal DB terminations with copper lugs including all the existing incoming/ outgoing connections, earthing, testing, repair & making good the wall with matching colour distemper/ white wash etc. as required.
442	P & F Recessed/ surface mounting vertical type heavy duty Double door type TPN-4 way sheet steel phosphatised powder painted Distribution Board with loose wire box, with incomer 1No. 4 pole MCCB-160A, 25 KA and 4 Nos. TP AC MCB-63A 10KA ( 'C' breaking characteristic) for outgoing circuits, 250 Amp busbar, neutral link, earth bar & din rail etc conforming to IS; 13032, IS; 8623, BS; 5486 of approved make including making all the incoming/ outgoing connections, internal DB terminations with copper lugs, testing etc. as required.
443	P & F Recessed/ surface mounting vertical type heavy duty Double door type TPN-6 way sheet steel phosphatised powder painted Distribution Board with loose wire box, incomer 1No. 4 Pole MCCB-125A, 18KA and 2 Nos. TP AC MCB-63A 10KA ( 'C' breaking characteristic), 3 Nos. TP AC MCB-32A 10KA ( 'C' breaking characteristic) and 3 Nos. SP AC MCB-32A 10KA ( 'C' breaking characteristic)for outgoing circuits, 125 Amp busbar, neutral link, earth bar & din rail etc conforming to IS; 13032, IS; 8623, BS; 5486 of approved make including making all the incoming/ outgoing connections, internal DB terminations with copper lugs, testing etc. as required.
444	P & F Recessed/ surface mounting vertical type heavy duty Double door type TPN-6 way sheet steel phosphatised powder painted Distribution Board with loose wire box, incomer 1No. 4 Pole MCCB-125A, 18KA and 3 Nos. TP AC MCB-32A 10KA ( 'C' breaking characteristic) and 9 Nos. SP AC MCB-32A 10KA ( 'C' breaking characteristic)for outgoing circuits, 125 Amp busbar, neutral link, earth bar & din rail etc conforming to IS; 13032, IS; 8623, BS; 5486 of approved make including making all the incoming/ outgoing connections, internal DB terminations with copper lugs, testing etc. as required.
445	P & F Recessed/ surface mounting vertical type heavy duty Double door type TPN-8 way sheet steel phosphatised powder painted Distribution Board with loose wire box, incomer 1No. 4 Pole MCCB-160, 25KA and 4 Nos. TP AC MCB-63A 10KA ( 'C' breaking characteristic), 3 Nos. TP AC MCB-32A 10KA ( 'C' breaking characteristic) and 3 Nos. SP AC MCB-32A 10KA ( 'C' breaking characteristic)for outgoing circuits, 250 Amp busbar, neutral link, earth bar & din rail etc conforming to IS; 13032, IS; 8623, BS; 5486 of approved make including making all the incoming/ outgoing connections, internal DB terminations with copper lugs, testing etc. as required.
446	P & F Recessed/ surface mounting vertical type heavy duty Double door type TPN-12 way sheet steel phosphatised powder painted Distribution Board with loose wire box, incomer 1No. 4 Pole MCCB-250A, 25KA and 6 Nos. TP AC MCB-63A 10KA ( 'C' breaking characteristic), 5 Nos. TP AC MCB-32A 10KA ( 'C' breaking characteristic) and 3 Nos. SP AC MCB-32A 10KA ( 'C' breaking characteristic)for outgoing circuits, 250 Amp busbar, neutral link, earth bar & din rail etc conforming to IS; 13032, IS; 8623, BS; 5486 of approved make including making all the incoming/ outgoing connections, internal DB terminations with copper lugs, testing etc. as required.
447	Plate Earthing as per IS: 3043 with copper earth plate 600 x 600 x 3 mm thick by embodying 4 mtr below the ground lavel with alternate layers of salt and charcoal (95 kg. each) with 20 mm dia G.I. B class watering pipe including all accessories like nut, bolts, reducer, nipple ,wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size300mm x 300mm complete and testing of earth resistance as required.
448	P/F 25mm x 5mm copper strip in 40mm dia G.I. Pipe from earth electrode. including connection with brass nut bolt spring washer excavation and refilling as rqd.
449	Providing and fixing 25 mm X 5 mm copper strip on surface/wall with providing insulating support for connections etc. as required.
450	Earthing as per IS:3043 with G.I earth plate 600 x 600 x 6 mm thick including accessories embodying by digging 4mtr below the ground lavel with alternate layers of salt and charcoal (95 kg. each) with 20mm dia G.I. B class watering pipe including all accessories like nut, bolts, reducer, nipple ,wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size300mm x 300mm complete and testing of earth resistance as required.
451	Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
452	Providing and fixing 25 mm X 5 mm G.I strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
453	Providing & fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. Tube, having single prong at top, with 85mm dia 6mm thick G.I. Base plate including holes etc. complete as required.
454	Rivetting, sweating and soldering of copper/GI tape (with another copper/GI tape, base of the finial or any other metallic object) as required.
455	Providing and fixing GI tape 20mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run)
456	Providing and fixing GI tape 20mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run)
457	Providing and fixing testing joint made of 20mm x 3mm thick GI strip 125mm long with 4No. G.I. bolts, nuts, check nuts, spring washer etc. complete as required.
458	Design, supply, installation, fixing, and testing commissioning of the complete of micro processor based intelligent addressable main fire alarm panel, central processing unit with the Two Loop Panel modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications.
459	Two Loop Panel
460	Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required.
461	Supplying, installation, testing & commissioning of cleanroom compatible intelligent analog addressable photothermal detector complete with mounting base complete as required.
462	Supplying, installation, testing & commissioning of cleanroom compatible smoke detector with builtin LED and mounting base complete with all connections etc. as required.
463	Supplying, installation, testing & commissioning of cleanroom compatible response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.
464	Supplying, installation, testing & commissioning of cleanroom compatible intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required.
465	Supplying, installation, testing & commissioning of fault isolator complete with base as required.
466	Supplying, installation, testing & commisssioning of cleanroom compatible intelligent addressable programmable sounder complete as required.
467	Supplying, installation, testing & commissioning of addressable fire control module complete as required
468	Supplying, installation, testing & commissioning of addressable phone control module complete as required.
469	Supplying, installation, testing & commissioning of intelligent addressable duct detector including suitable Photo detector complete with base as required.
470	Supplying, installation, testing & commissioning of addressable manual call point complete as required.
471	Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.
472	Supplying, installation, testing & commissioning of addressable beam detector with short circuit isolator (inbuilt or separate) complete with emitter and receiver including connections with remote test features etc complete as required.
473	Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH outer sheath complete as required
474	Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.
475	Supply, Installation, Testing & Commissioning of D.P. Structure with AIR BREAK SWITCH having following specifications: DP :double pole structure on 2no ISMB 125mm x 70mm, 10 mtr high pole using 7 no MS channel each of size (100mm x 50mm x 6mm) x 2500mm (9.5Kg per mtr.)complete in all respect in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling and secured with holding clamps, springs washers, clamps bolts, nuts, etc. as required. GO: 11 KV outdoor type 3 Pole gang operated, tripple pole, 400 Amps rating, Central pot rotating double break GO switch on the existing DP structure complete with all accessories for assembly and operation as per the specification and IS – 1818/1972 and IS – 9920 (Part I to IV / Latest version), 9Nos. post insulators of 12KV (IS: 2554 & IS:5350 part III), bimetallic connector mounted horizontal or vertical position on provided cross arm with adequate length of G.I. Pipe 'B' class- 32mm dia. including S/E of operating pipe and handle supporting arrangement of MS flat 50 x 6 mm and channel iron 100mm x 50 mm size with required Nos. and size of MS nuts and bolts for operating handle erected on extended square shaft. The operating handle provided with locks in ‘ON’ position & locks in ‘OFF’ position with key at suitable height( 3' ) from ground level with necessary clamps, hot dipped galvanised hardware, nut, bolts etc complete in all respect.
476	(Tested by ERDA/ CPRI & The entire G.O.switch assembly/ unit should be properly bonded to the existing earth and the job is to be completed to the entire satisfaction of the Engineer-in-Charge DO: 3nos 11 KV, rated current 400 Amps, DO fuse assembly as per relevant IS on existing DP structure complete with mounting base, post insulators, hot dipped G.I. harware , clamps, operating rod, terninal connector including fuse rating 60Amps etc. LA: 3 piece non linear resistor type. lighting arrestor of approved make suitable for 3 wire, 11kv OH line with rated voltage of 9kv rms & nominal discharge current rating of 10 KA & complete with galvanized clamping arrangement GI bolts, nuts, washer, fitted on existing DP structure etc as required. JUMPERS: 3 Nos. 11kv ACSR conductors mounted on pin type insularors as required.
477	Supplying and erection of galvanised stay set for 11 kV over head lines complete with 19/ 20 mm dia X 1.8 meter long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle (20 mm X 600 mm), 7/ 4.00 mm dia G.I. stay wire and 11 kV strain insulator etc. in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.
478	Supply, installation, testing and commissioning of following capacity (continuous loading) BEE 5 Star rated (Corresponding Level as per BIS amended upto date of receipt of tender), 11/0.433 KV step down, 3 Phase,50 Hz, Dyn 11 vector group, ONAN (Oil Natural Air Natural) copper wound transformer (Electrolytic grade 99.9% pure copper, Core made of first grade Cold Rolled Grain Oriented (CRGO) Core grade MOH or better, suitable for outdoor/indoor applications with On Load Tap Changer (OLTC) on HV side having AVR relay and Remote Tap Changer Control (RTCC) forautomatic sensing of incoming voltage, automatic operation of OLTC and facility for remote and manual operation of OLTC HV side in range of +5% to -15% in steps of 2.5%, having cable end boxes on HV side suitable for 1x185 sqmm XLPE cable of 11 KV grade, including bus trunking arrangement on LV side including supplying and laying of copper conductor multicore control cable from transformer to HT breaker/panel for safety tripping, complete with all accessories and safety provisions as per relevant IS Code including first filling of filtered dehydrated oil, i/c supplying and grouting of suitable M.S. Channel with all accessories and transformer shall be confirming to IS: 2026 (Part 1 to Part 5), IS: 1180 and duly ISI Marked and as per standerd specifications complete in all respects etc as required at site. The maximum flux density in any part of the core and yoke at rated voltage and frequency shall be such that the flux density with + 12.5 percentcombined voltage and frequency variation from rated voltage and frequency does not exceed 1.9 Tesla. The permissible temperature-rise shall not exceed 40 dg.C for oil and 45 dg. C for winding. Inside of tank shall be painted with varnish or liquid resistant paint. For external surfaces one coat of thermo setting powder paint or one coat of epoxy primer followed by two coats of polyurethane base paint shall be used. IS: 1180 (Part 3) shall be referred to for paint thickness for normal to medium corrosive atmosphere.
479	For highly polluted atmosphere and special application external paint work shall be as per direction of Engineer-in-Charge. Design ambient condition: a) air temperature 50 deg C, b) Relative Humidity 90 % Max, c) Seismic Zone as per location of site, d) Altitude as per location/site. Noise level Shall not exceed limits as per NEMA TR-1 with all accessories running measured as per IEC 551 / NEMA standard. The transformer should have QR code which should contain drawing, test report OEM manual Geo- Tag of manufacturing location etc. Marking Each transformer shall be provided with rating plate made of anodized aluminium/ stainless steel material securely fixed on the outer body, easily accessible, as per IS: 1180 Part-3. The entries on the rating plate shall be indelibly marked.Fitting and Accessories: The following fittings shall be provided: -a) Two earthing terminals with the earthing symbol b) Oil level gauge indicating oillevel at minimum, 30°C and maximum operating temperature; c) Air release device (for non-sealed type transformers) d) Rating and terminal marking plates; e) Silica gel breather f) Drain-cum-sampling valve (¾″ nominal size thread, IS 554) preferably steel with plug for three phase transformers; g) Thermometer pocket with cap; h) Oil filling holes having (1¼″ nominal sizethread) with cover (for sealed type transformers without conservator); i) Lifting lugs for the complete transformer as well as for core and winding assembly; j) Pressure relief device or explosion vent above; k) Onefilter valve on the upper side of the tank Inspection hole; n) HV side neutral grounding strip (where one of the HV bushing terminal is connected to earth); o) Buchholz relay for transformers. p) Arcing horns or suitable rating lightning arrestors for HT side – 3 Nos. q) Bird guard; r) Oil temperature indicator and winding temperature indicators with suitable tripping mechanism above permissible limit s) t) Additional Neutral separately brought out on bushing for earthing. u) Magnetic oil level gauge with low oil level alarm contact; v) Non return valve (for conducting pressure test); w) Pressure relief device or explosion vent x). Monogram Plate y) Inspection cover z). Detachable type radiators with top and bottom shutoff valve. aa) Oil Conservator with Oil level indicator, minimum level marking and drain plug, bb) Necessary hardware, clamps, lugs etc. for termination on HV/MV etc. for all transformers. 1000 KVA
480	Supplying, installation testing & commissioning of indoor type floor mounted metal clad, 11 KV VCB Panel with VCBs (1 No. incoming & 1 Nos. outgoing) totally enclosed & fully interlocked, horizontal drawout, horizontal / vertical isolation type breaker as per IS 13118, as amended up to date and additional specifications, having capacities as mentioned below, single break, trip free mechanism, manually charged and auto / manually closing breaker suitable for use on 11 KV, 3 Phase, 50 Hz. A.C. supply with short circuit fault level of 350 MVA, complete with self contained, fully interlocked, rack in and rack out mechanism, air insulated but encapsulated copper bus bars of 800 Amps. capacity, breaker featured with mechanical ON/OFF indicator with hand trip device, spring release coil, shunt trip coil and auxiliary switch of 4 NO. + 4 NC and equipped with following switchgears and accessories i/c connections suitable for 3x240 Sqmm. XLPE 11 KV cable (cable entry from bottom / top / side) end termination with heat shrinkable jointing material etc. ( Note : cost of end termination not included in this item) Incoming Panel & Outgoing i) 630 Amp. 350 MVA 26 KA VCB = 1 Set ii) Breaker control switch. = 1 Set iii) 24 V DC Tripping Coil. = 1 Set iv) 24 V DC Closing Coil. = 1 Set v) 240 V AC spring charge motor. = 1 Set vi) Set of ON &OFF indicating lamps. = 1 Set vii) Phase indicating lamps (RYB).= 3 Set viii) Clear lamp for trip circuit health supply. = 1 Set ix) (0-80 A) dual scale digital type ammeter, selector switches for ammeters. = 1 Set x) Aux. relays for Anti Pumping & indication = 1 Set xi) Tripping relay for fault = 1 Set xii) Trip circuit supervision relay = 1 Set xiii) In built Power Pack with 220 volt AC input from auxilary supply and 24 volt DC continuous output suitable for closing/ tripping/indication of 3 Nos. HT Panel boards, charging unit, capacitor bank for emergency delivering for trip system complete with suitable capacity of ammeter & voltmeter i/c connection etc. as required = 1 Set xiv) Microprocessor based numerical relay with O/L, E/F and S/C protection communication ready = 1 Set
481	xvi) Dual core dual ratio 3 No. CTs 80/40/5/5 A of 15 VA burden and accuracy Class-0.5 for metering and class 5P10 for protection. = 1 Set xvii) 11 KV /110 Volts PT Class 0.5 accuracy and 100 VA burden with 1 No. Digital type Voltmeter (0 15 KV), digital type selector switch for voltmeter and protection fuses/MCB for HT metering upto 12 KV on incomer. = 1 Set xviii) Cable end box for termination of 1 No. 3 C x 240 sq.mm XLPE cable as incoming. xix) Necessary strip heater to prevent absorption of moisture during winter and monsoon. xx) Alarm annunciator with buzzer, ACK, test push button for transformer faults and electrical faults. =2 Sets xxi)Test terminal block, fuses , circuit lables. Indicating Amps. As per standard practice. xxii) Necessary strip supply healthly indicator lamp. xxiii) 1 No - Amber for Trip indication. xxiv) Rear cable entry box suitable for termination of cable of size 3 x 240/300 Sq.mm XLPE cable.
482	Supply of following items for substation.
483	Rubber hand gloves suitable for 11KV.
484	Supply & fixing of shock treatment chart both in Hindi & English for treating person suffering due to electric shock mounted on wall hooks.
485	Providing and fixing H.T. danger notice plate of 250 mm x 200mm, made of mild steel at least 2mm thick and vitreous enamelled white on both sides and with inscription in single red colour on front side as required.
486	Providing and fixing M.V. danger notice plate of 200 mm x 150mm, made of mild steel at least 2mm thick and vitreous enamelled white on both sides and with inscription in single red colour on front side as required.
487	Supplying & fixing of CO₂ type fire extinguisher 4.5 Kg capacity ISI marked confirming to IS:15683:2006 complete with delivery hose horn, squeeze grip release valve, locking arrangement, operation manual, bracket with two screw and sleeve etc. as required.
488	Supplying and fixing ABC Fire Extinguisher 6 kg capacity (Stored pressure type) duly ISI marked conforming to IS 15683:2006 with IS14609 ABC powder complete with Squeeze grip release valve discharge pipe locking arrangment operation manual valve suspendet bracket with complete as reqd.
489	Supply and fixing safety instruction chart on wall duly framed with 5mm thick glass required.
490	Providing of set of 4 Nos. 9.5 Litre capacity GI bucket painted in post office red colour with prior coat of red - oxide paint and written with white paint 'Fire' and mounted on MS angle iron frame with bracket of appropriate size and cpapcity including filling sand etc.
491	Providing of rubber mat 1 mtr. (wide) and 12mm thick to withstand 33KV dielectric strength as per IS 15652- 2006.
492	Design, Supply, Installation, Testing and Commissioning of cubical type Main L.T. panel suitable for 415V, 3 Phase, 4 wire, 50Hz AC supply system fabricated in compartmentalized (perferably) designed from CRCA sheet steels of 2mm thick for frame work and cover, 3mm thick for gland plates, face area 3.2 sqmtr and 1000mm deep including cleaning and finishing complete with 7 tank process for powder coating in approved shade and having 2500Amp capacity extensible type TPN copper bus bars of high conductivity, DMC / SMC bus bar supports, with short circuit withstand capacity of 31MVA for 1 Sec. bottom base channel of MS section not less than 100mm x 50mm x 5mm thick, fabrication shall be done in transportable sections, entire panel shall have a common copper earth bar size of 50mm x 10mm at the rear with 2 Nos. earth stud, solid connections from main bus bars to switchgears with required sizes of copper bus bar and control wiring with 2.5sq.mm. PVC insulated copper conductor S/C cable, cable alleys, cable gland plates in two half including providing following switch gears :- INCOMER TPN copper bus bars of minimum 2500 Amp capacity with shrinkable coloured sleeves and including DMC / SMC bus bar supports at required intervals complete for cross section, size supports and their spacing etc. for withstanding fault level of 31MVA for 1 Sec. OUTGOING 2 Nos. 1600 Amps four pole horizontal Drawout type Air Circuit Breaker for fault breaking capacity of 50KA (ICS = Icu upto 433 Volts) manually operated, fitted with interlocked door, automatic safety shutters, mechanical ON / OFF and service / test / isolated position indicators and frame earthing contact, conforming to IS : 13947-2, 1993 as amended upto date complete with following accessories for each ACB.
493	Incomer shall have one set of the following items: 1 No. Independent manual spring closing mechanism. 1 Set Microprocessors release (EMI & EMC certified) for over current, earth fault & short circuit protection. 1 Set 96mm square flush pattern digital type voltmeter (0-500 V) with selector switch & back up MCBs.1 Set 96mm square flush pattern digital type Ammeter (0-2500 Amp) with selector switch & one set of 3 Nos. CT's of Ratio 2500 /5A class - I accuracy and 15VA burden. 6 Nos. Phase indication LED lamps with 2Amp back up MCB, breaker \\"ON\\" indicating light with 2A MCB test terminal block set, MCB, circuit as per standard practice, auxiliary contacts for positive interlocking of the breakers as required. Shunt trip coil 220V A.C. 3 No. 1600 / 5 Amp CT for APFC Panel
494	Design, Fabrication, supplying, installation, testing and commissioning of cubical type LT panel suitable for 415 V, 3 phase, 4 wire 50 Hz AC supply system having minimum front area of panel as face area should be 12.6 Sq. Mtr. and 950 mm deep fabricated in compartmentalised design from CRCA sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plates including cleaning and finishing complete with 7 tank process for powder coating in approved shade, having 2000 Amp capacity extensible type TPN Copper bus bars of high conductivity, DMC/SMC bus bar supports, with short circuit withstand capacitiy of 31 MVA for 1 sec. bottom base channel of MS section not less than 100mm x 50mm x 5mm transportable sections, entire panel shall have a common copper earth bar of size 25mm x 5mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of aluminium bus bars and control wiring with 2.5 Sq. mm PVC insulated copper conductor S/C cable, cable alleys, cable gland plates in two half, i/c providing following switch gears:- Incoming:- 2 No. 1600. Amps four pole horizontal motorised drawout type air circuit breaker of fault breaking capacity 50 KA (Ics= Icu) electrically drawout type/Motorized spring charged mechanism (control On/off by TNC ) with manual charging facility, fitted with inerlocked door, automatic safety shutters, mechanical ON/OFF and service/test/isolated position indicators and frame earthing contact, conforming to IS:13947-2 1993 as amended with automatic spring charging upto date with battery backup with charger for TNC Control etc complete with following accessories for each ACB. Independent manual spring closing mechanism -- 1 No. for each ACB. Microprocessor release for over current, earth fault and short circuit protectiion -- 1 Set for each ACB. Digital Voltmeter 96 mm square flush pattern type voltmeter (0-500 Volt), with selector switch and back up 2 Amps. SP MCB-- 1 Set for each ACB. Digital Ampear 96 mm square flush pattern type ammeter (0-1500 Amp), with selector switch and one set of 3 Nos. CTs of ratio 2000/5A Class I accuracy and 15 VA burden -- 1 Set for each ACB.
495	3 Nos. phase indication LED lamp with 2 Amp back up SP MCB , breaker 'ON'or 'OFF' indicating light with 2A SP MCB, test terminal block set, fuses, circuits as per standard practice, auxiliary contacts for positive interlocking of the breakers as required. --- 1 Set for each ACB. Shunt trip coil 220V AC. Auto Manual Salecter switch. Bus Couplers :- 1 No. 1600. Amps four pole horizontal drawout type air circuit breaker of fault breaking capacity 50 KA (Ics= Icu) electrically drawout type, fitted with inerlocked door, automatic safety shutters, mechanical ON/OFF and service/test/isolated position indicators and frame earthing contact, conforming to IS:13947-2 1993 as amended with automatic spring charging upto date with battery backup with charger for TNC Control etc complete with following accessories for each ACB (but without O/C and E/F protection.Independent manual spring closing mechanism -- 1 No. for each ACB. Breaker 'ON' indicating light with 2A SP MCB , test terminal block set, fuses, circuits as per standard practice, auxiliary contacts as required for positive interlocking of the breakers as required -- 1 Set. Breaker ON/OFF control with TNC Control . Bus Bar:-TPN Copper Bus bars of minimum of 2000 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars supports at required intervals complete for cross section, size supports and their spacing etc for withstanding fault level of 31 MVA for 1 Sec. Interlocking:-Electrical through advance contacts in ACBs (Incomer and bus couplers) and mechanical (castle key) interlocking should be provided to ensure that only one supply is available at a time on each section of bus and to eliminte any possibility of accidentally approaching two supplies at one bus section.Outgoings:- 1 No. 1000. Amps four pole horizontal drawout type air circuit breaker of fault breaking capacity 50 KA (Ics= Icu) electrically drawout type, fitted with inerlocked door, automatic safety shutters, mechanical ON/OFF and service/test/isolated position indicators and frame earthing contact, conforming to IS:13947-2 1993 as amended with automatic spring charging upto date complete with following accessories for each ACB (but without O/C and E/F protection.
496	4 No- quick make and quick break current limiting 4P MCCB 320 Amp., 36 KA adjustable O/L & fixed S/C setting with Rotary handle Operating Mechanism, thermal Magnetic Release and conforming to IS:13947-2/ IEC 60947-2 with front face and centralized adjustable, line load inter hangeability including making connections with lugs, spreaders etc. as required.4 No- quick make and quick break current limiting 4P MCCB 400 Amp., 36 KA adjustable O/L & fixed S/C setting with Rotary handle Operating Mechanism, thermal Magnetic Release and conforming to IS:13947-2/ IEC 60947-2 with front face and centralized adjustable, line load inter hangeability including making connections with lugs, spreaders etc. as required.7 No- quick make and quick break current limiting 4P MCCB 125 Amp., 36 KA adjustable O/L & fixed S/C setting with Rotary handle Operating Mechanism, thermal Magnetic Release and conforming to IS:13947-2/ IEC 60947-2 with front face and centralized adjustable, line load inter hangeability including making connections with lugs, spreaders etc. as required.3 No- quick make and quick break current limiting 4P MCCB 160 Amp., 36 KA adjustable O/L & fixed S/C setting with Rotary handle Operating Mechanism, thermal Magnetic Release and conforming to IS:13947-2/ IEC 60947-2 with front face and centralized adjustable, line load inter hangeability including making connections with lugs, spreaders etc. as required.3 Nos. phase indication LED lamp with 2 Amp back up SP MCB, breaker 'ON' or 'OFF' indicating lights with 2A SP MCB, test terminal block set, fuses, circuits as per standard practice as required -- 1 set for each MCCB -- 1 Set for each MCCB.40 Amps DP MCB.19 sets suitable size TP&N Terminals to receive XLPE aluminium / copper cable of 1.1KV grade for outgoing ckts.
497	Design, Supply of free standing floor mounted dust and vermin proof, compartmentalised cubical panel made out of CRCA sheet, face area 3.57 sq. mtr. and 400 mm deep, required hardware, duly painted by 7 tank process powder coating with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness, separate detachable gland plate, 100x50x6mm M.S. base channel, hinged door with locking arrangement for equipment/ switchgear/ busbar chamber/ cable alley . Thickness of sheet shall not be less than 2.0mm of any compartment. Load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls compartments having bolted type doors with detachable extension type structure. S/F of following accessories and their inter connections with lugs, terminating all the outgoing and incoming supply terminals in cable alley fixed on SMC/DMC type insulators (as per requirement) with suitable size copper strip with heat shrinkable PVC sleeves/ wire, suitable 25 X 5 size earth copper strip through out run at the bottom of the panel testing etc as required.INCOMER -a) 1No- quick make and quick break 4 Pole current limiting MCCB 630 Amp., 50 KA adjustable O/L & adjustable S/C setting with Rotary handle Operating Mechanism, thermal Magnetic Release and conforming to IS:13947-2/ IEC 60947-2 with front face and centralized adjustable, line load inter changeability including making connections with lugs, spreaders etc. as required for incoming supply.BUSBARS.- b) 1Set-TPN copper bus bars of minimum 800 Amp capacity with heat shrinkable coloured sleeves including DMC / SMC bus bar supports at required intervals complete for cross section, size supports and their spacing etc. c) 1Set- 96mm square flush pattern digital type voltmeter (0-500V) with builtin selector switch & 2Amp. back up MCBs. d) 1Set- 96mm square flush pattern digital type Ammeter (0- 200Amp) with builtin selector switch & one set of 3 Nos. CT's of Ratio 600 /5A for each set, class - I accuracy and 15VA burden. e) 3Nos. Phase indication LED lamps with 2Amp back up MCBs.
498	f) 1set TP&N suitable size Terminals to receive XLPE aluminium / copper cable of 1.1KV grade for incoming ckt. OUTGOING:- a) 3 No- quick make and quick break current limiting 4P MCCB 400 Amp., 36 KA adjustable O/L & fixed S/C setting with Rotary handle Operating Mechanism, thermal Magnetic Release and conforming to IS:13947-2/ IEC 60947-2 with front face and centralized adjustable, line load inter hangeability including making connections with lugs, spreaders etc. as required. b) 1 No- quick make and quick break current limiting 4P MCCB 250Amp., 36 KA adjustable O/L & fixed S/C setting with Rotary handle Operating Mechanism, thermal Magnetic Release and conforming to IS:13947-2/ IEC 60947-2 with front face and centralized adjustable, line load inter changeability including making connections with lugs, spreaders etc. as required. c) 3 Nos- quick make and quick break current limiting 4P MCCB 160 Amp., 36 KA adjustable O/L & fixed S/C setting with Rotary handle Operating Mechanism, thermal Magnetic Release and conforming to IS:13947-2/ IEC 60947-2 with front face and centralized adjustable, line load inter changeability including making connections with lugs, spreaders etc. as required. d) 2 Nos- quick make and quick break current limiting 4P MCCB 125 Amp., 36 KA adjustable O/L & fixed S/C setting with Rotary handle Operating Mechanism, thermal Magnetic Release and conforming to IS:13947-2/ IEC 60947-2 with front face and centralized adjustable, line load inter changeability including making connections with lugs, spreaders etc. as required. e) 9 sets suitable size TP&N Terminals to receive XLPE aluminium / copper cable of 1.1KV grade for outgoing ckts.
499	Design, Supply of free standing floor mounted dust and vermin proof, compartmentalised cubical panel made out of CRCA sheet, face area 1.80 sq. mtr. and 350 deep, required hardware, duly painted by 7 tank process powder coating with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness, separate detachable gland plate, 100x50x6mm M.S. base channel, hinged door with locking arrangement for equipment/ switchgear/ busbar chamber/ cable alley . Thickness of sheet shall not be less than 2.0mm of any compartment. Load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls compartments having bolted type doors with detachable extension type structure. S/F of following accessories and their inter connections with lugs, terminating all the outgoing and incoming supply terminals in cable alley fixed on SMC/DMC type insulators (as per requirement) with suitable size copper strip with heat shrinkable PVC sleeves/ wire, suitable 25 X 5 size earth copper strip through out run at the bottom of the panel testing etc as required.Area of board should not less than 5.49 Sqmtr.(as per line diagram). INCOMER - a) 1No- quick make and quick break 4 Pole current limiting MCCB 400 Amp., 50 KA adjustable O/L & adjustable S/C setting with Rotary handle Operating Mechanism, thermal Magnetic Release and conforming to IS:13947-2/ IEC 60947-2 with front face and centralized adjustable, line load inter changeability including making connections with lugs, spreaders etc. as required for incoming supply. BUSBARS.- b) 1Set-TPN copper bus bars of minimum 400 Amp capacity with heat shrinkable coloured sleeves including DMC / SMC bus bar supports at required intervals complete for cross section, size supports and their spacing etc. c) 1Set- 96mm square flush pattern digital type voltmeter (0-500V) with builtin selector switch & 2Amp. back up MCBs. d) 1Set- 96mm square flush pattern digital type Ammeter (0- 200Amp) with builtin selector switch & one set of 3 Nos. CT's of Ratio 300 /5A for each set, class - I accuracy and 15VA burden. e) 3Nos. Phase indication LED lamps with 2Amp back up MCBs.
500	f) 1set TP&N suitable size Terminals to receive XLPE aluminium / copper cable of 1.1KV grade for incoming ckt. OUTGOING:- a) 1 No- quick make and quick break current limiting 4P MCCB 160 Amp., 36 KA adjustable O/L & fixed S/C setting with Rotary handle Operating Mechanism, thermal Magnetic Release and conforming to IS:13947-2/ IEC 60947-2 with front face and centralized adjustable, line load inter hangeability including making connections with lugs, spreaders etc. as required. b) 4 Nos- quick make and quick break current limiting 4P MCCB 250Amp., 36 KA adjustable O/L & fixed S/C setting with Rotary handle Operating Mechanism, thermal Magnetic Release and conforming to IS:13947-2/ IEC 60947-2 with front face and centralized adjustable, line load inter hangeability including making connections with lugs, spreaders etc. as required. e) 5 sets suitable size TP&N Terminals to receive XLPE aluminium / copper cable of 1.1KV grade for outgoing ckts.

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents

Also Visit

Tenders

Rajasthan Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of Mems Sensor Fabrication Lab At Csir-Ceeri, Pilani, Jhunjhunu-Rajasthan

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of Mems Sensor Fabrication Lab At Csir-Ceeri, Pilani, Jhunjhunu-Rajasthan

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us