Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Item Description |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches ordrains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m...... All kinds of soil |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m…........ All kinds of soil |
| 4 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete....... All kinds of soil |
| 5 | Supplying chemical emulsion in sealed containers including delivery as specified. - Chlorpyriphos/Lindane emulsifiable concentrate of 20% |
| 6 | Diluting and injecting chemical emulsion for POST CONSTRUCTIONAL anti-termite treatment as per IS: 6313(Part III)- Latest revision (excluding the cost of chemical emulsion):… Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. - .... With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.... All kinds of soil |
| 7 | Treatment of soil under plinth filling using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with sand filling: - With Chlorpyriphos/Lindane E.C. 20% with 1% concentration….. All kinds of soil |
| 8 | 1:2:4( 1 Cement:2 fine sand : 4 graded stone aggregate 20 mm nominal size)… All kinds of soil |
| 9 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering. All work upto plinth level:…. 1:4:8( 1 Cement: 4 fine sand : 8 graded stone aggregate 40 mm nominal size).. All kinds of soil |
| 10 | Centering shuttering including struttings, propping etc. and removal of form work for: Foundations, footings, bases for columns. |
| 11 | Providing and laying damp-proof course with cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 12.5mm/20mm nominal size)…. 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) …. All kinds of soil |
| 12 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification… All kinds of soil |
| 13 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth..... All kinds of soil |
| 14 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement- All work upto plinth level… 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 15 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost …. 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 16 | Reinforced cement concrete work in beams, suspendedfloors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement-... 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 17 | Centering shuttering including struttings, propping etc….. Foundations, footings, bases for columns etc. for mass concrete with timber plank |
| 18 | Centering shuttering including struttings, propping etc….. Suspended floors, roofs, landings, balconies and access platform with timber planks |
| 19 | Centering shuttering including struttings, propping etc….. Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank |
| 20 | Centering shuttering including struttings, propping etc….. Columns, Pillars, Piers, Abutments, Posts and Struts with wooden plank |
| 21 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto floor five level…..Thermo-Mechanically Treated bars/ Cold twisted deformed steel bars |
| 22 | First class brick work in foundation and plinth including cost of all materials as required complete…..In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 23 | First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete:-… In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 24 | Half brick masonry work with first class bricks in foundation and plinth including cost of all materials asrequired complete:-…. In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 25 | Half brick masonry with first class bricks in superstructure upto floor five level including cost of all materials as required complete:-… In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 26 | Providing and fixing gang saw cut of approved thickness mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base of cement mortar 1:4 ( 1 cement : 4 fine sand ) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing , curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels:-..... 14 mm thick Granite of any colour and shade duly approved:- Area of slab over 0.50 sqm. |
| 27 | Providing edge moulding to approved thickness marble stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete at all levels as required as per design approved by the Engineer-in-Charge:-… 14 mm thick Granite work. |
| 28 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position :…. Local Teak Wood |
| 29 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters..... 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 30 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete….. Fixed to openings /wooden frames with rawl plugs screws etc. |
| 31 | Providing 40 × 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement : 3 fine sand : 6 graded stone aggregate 20mm nominal size) |
| 32 | Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete… 125 × 65 × 2.12 mm |
| 33 | Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete |
| 34 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :… 300x16 mm |
| 35 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :… 250 x 10 mm |
| 36 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :.. 125 mm |
| 37 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete….. Twin rubber stopper |
| 38 | Providing and fixing factory made door frame (single rebate) made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 60mm width & 30mm thickness and shall be fixed to wall as per instructions of Engineer-In-Charge using 100x8 sheet metal CSK screws. |
| 39 | Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71mm width & 28mm thick as vertical & horizontal styles. Joints are made using solvent adhesive and GI ‘C sections (39mm x 19mm x 0.6mm thick) or M S pipe (40mm x 20mm ) stiffener frame insert & telescopic polymeric ‘L’ corners .The panel shall be filled with 3mm thick high - pressure compact laminate as per manufacturer’s specifications and directions of the Engineer-in-charge, cover moulding shall be provided for covering fixing screws and elegant look.( for W.C. bathroom door shutter). |
| 40 | Providing and fixing PVC rigid foam sheet 1mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive. |
| 41 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm at 100 mm centre to centre and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia. steel pulleys & with riveted bolts, nuts, locking arrangement, stoppers, handles, hold fast /anchor bolt including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required. |
| 42 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.... Hot finished welded type tubes |
| 43 | Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. complete as required:-… In grating, frames, guard bar, railing, brackets, gates and similar works, all complete. |
| 44 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same withnecessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 45 | Providing and fixing chequered terrazo tiles 22 mm thick with graded marble chips of size upto 6 mm, laid on floors, footpath & courtyard on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing complete.... Dark shade pigment using ordinary cement |
| 46 | Providing and laying 1st class quality vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 - 2017, of approved make, in all colours and shades, laid over 20mm thick cement mortar 1:4 (1 cement : 4 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. all complete as per direction of the Engineer-in-charge..... Glazed Vitrified Tiles (Glossy / Mat Finish/ Anti-Skid)...Size of tile 600 mm x 600 mm |
| 47 | Extra for providing and laying Vitrified tiles (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622 - 2017, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. all..... Soluble Salt Stainfree vitrified tiles (Glossy) / Double charged Stainfree vitrified tiles (Glossy) / Glazed Vitrified Tiles (Glossy / Mat Finish/ Anti-Skid) / Glazed Vitrified Tiles - Full Body (Glossy / Mat Finish/ Anti-Skid) |
| 48 | 12 mm cement plaster of mix …... In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) |
| 49 | 15 mm cement plaster on the rough side of single or half brick wall of mix:… In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) |
| 50 | 6 mm cement plaster of mix:…. In cement mortar 1 : 3 ( 1 cement : 3 fine sand ) |
| 51 | Neat cement punning. |
| 52 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 53 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 grams/ litre, of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :... New work ( two or more coats) over and including water thinnable priming coat with cement primer. |
| 54 | Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :….New work ( two or more coats applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 55 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications [Payment shall be made after submission of Test Certificate issued by the Manufacturer]:….. Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture. |
| 56 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture |
| 57 | Demolishing reinforced cement concrete manually / by mechanical means including stacking of steel bars properly and disposal of unserviceable material with all lifts and upto 50 m lead etc. complete as per direction of the Engineer- in-charge. |
| 58 | Demolishing reinforced brick work manually / by mechanical means including stacking of steel bars, bricks/ brick slump properly and disposal of unserviceable material with all lifts and upto 50 m lead etc. complete as per direction of the Engineerin- charge. |
| 59 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineerincharge. (Glazing and paneling and dash fasteners to be paid for separately) :-... For fixed portion of approved quality:-…. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). |
| 60 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineerincharge. (Glazing and paneling and dash fasteners to be paid for separately) :-... For fixed portion of approved quality:-....Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). |
| 61 | Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge (Cost of snap beading shall be paid in basic item) :-....With float glass panes of 4.0 mm thickness ( weight not less than 10.0 kg / sqm ) |
| 62 | Filling the gap in between aluminium frame and adjacent RCC/brick work by providing weather silicon sealant over backer rod of approved quality etc. complete as per architectural drawing and direction of the Engineer-in charge:- (i) Upto 5 mm depth and 5 mm width. |
| 63 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like as required as per direction of the Engineer-in-charge, consisting of : (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) 2nd course of 20 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.(iii) 3rd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/ sqm). [Payment shall be made after submission of the product performance shall carry guaranteed for 10 years against any leakage] |
| 64 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound, as directed by Engineer-in-Charge and consisting of applying :(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and fine sand @ 1.289 kg/sqm.This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. [Payment shall be made after submission of the product performance shall carry guaranteed for 7 years against any leakage] For the purpose of measurement the entire treated surface will be measured. |
| 65 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :White Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 66 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required :.....W.C. pan with ISI marked white solid plastic seat and lid |
| 67 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 68 | Providing and fixing Stainless Steel AISI 304 (18/8)kitchen sink as per IS 13983 with C.I. brackets andstainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required:.....Kitchen sink with drain board:......510x1040 mm bowl depth 250mm. |
| 69 | Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. |
| 70 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings:Flat back wash basin of size 550x400mm. |
| 71 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete…...Semi rigid pipe… 40 mm dia |
| 72 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe…. 40 mm dia |
| 73 | Providing and fixing 100 mm sand cast Iron grating for gully trap. |
| 74 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 75 | Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 76 | Providing and fixing toilet paper holder : C.P. brass |
| 77 | Providing and fixing soil, waste and vent pipes:….100 mm dia….. Sand cast iron S&S pipe as per IS: 1729. |
| 78 | Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 (1 cement: 2 fine sand) in S.C.I./C.I. Pipes:….. 100 mm dia pipe |
| 79 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/ cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. :...... For 100 mm dia. Pipe |
| 80 | Providing and fixing heel rest sanitary bend….100 mm dia… Sand cast iron S&S as per IS - 1729 |
| 81 | Providing and fixing double equal plain junction of required degree….. 100x100x100x100 mm.. Sand cast iron S&S as per IS - 1729 |
| 82 | Providing and fixing single equal plain junction of required degree…. 100x100x100 mm… Sand cast iron S&S as per IS - 1729 |
| 83 | Providing and fixing terminal guard:…. 100 mm… Sand cast iron S&S as per IS - 1729 |
| 84 | Providing and fixing collar:…. 100 mm…. Sand cast iron S&S as per IS - 1729 |
| 85 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter:… 100mm |
| 86 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors:….. 100 mm inlet and 100 mm outlet… Sand Cast Iron S&S as per IS: 1729. |
| 87 | Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size ) including necessary plaster and pointing in cement mortar 1:4(1cement: 4 coarse sand):..... 100 mm dia. |
| 88 | Providing and fixing PTMT Waste Coupling for washbasin and sink, of approved quality and colour…... Waste coupling 3.1 mm of 79mm length and 62mm breadth weighing not less than 45 gms |
| 89 | Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colours weighing not less than 105 gms |
| 90 | Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colours weighing not less than 80 gms. |
| 91 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour….. 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. |
| 92 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge..... Concealed work including cutting chases and making ,,,,, 15 mm nominal outer dia .Pipes.good the walls etc. |
| 93 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge..... Concealed work including cutting chases and making ,,,,, 20 mm nominal outer dia .Pipes. |
| 94 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.... External work....... 25 mm nominal outer dia .Pipes. |
| 95 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.... External work....... 40 mm nominal outer dia .Pipes. |
| 96 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :...25 to 40 mm nominal bore |
| 97 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):…........40 mm nominal bore |
| 98 | Providing and fixing ball valve (brass) of approved quality complete :…. 25 mm dia. nominal bore |
| 99 | Providing and fixing gun metal non-return valve of approved quality (screwed end):… 40 mm nominal bore …. Horizontal |
| 100 | Constructing masonry Chamber 30x30x50 cm, inside , in brick work in cement mortar 1:4 (1 cement :4 fine sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :.... With Second Class bricks |
| 101 | Constructing masonry Chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 fine sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 190 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design :.... With Second Class bricks |
| 102 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 103 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931… 15 mm nominal bore |
| 104 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms…. 15 mm nominal bore |
| 105 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931….. 15 mm dia nominal bore |
| 106 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931…. 15 mm nominal bore |
| 107 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 108 | Providing and fixing PTMT pillar cock of approved quality and colour …. 15mm nominal bore, 107mm long, weighing not less than 110 grams. |
| 109 | Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately):… 50 mm dia |
| 110 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms. |
| 111 | Cutting holes upto 30x30 cm in walls including making good the same :… With 1st class bricks. |
| 112 | Cutting holes upto 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. |
| 113 | Making chases upto 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. |
| 114 | Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete :… 100 mm diameter |
| 115 | Providing and laying cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) alround S.W. pipes including bed concrete as per standard design:… 100 mm diameter S.W, pipe |
| 116 | Supplying and fixing C.I. cover without frame for manholes :….. 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg. |
| 117 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 1st class bricks in cement mortar 1:4 (1 cement : 4 fine sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 fine sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 fine sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :... Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets : |
| 118 | Extra for depth beyond 450 mm of brick masonry chamber for underground C.I. inspection chamber with same specification as mentioned in item no 20.330 complete as per standard design :… For 500x700 mm size |
| 119 | Drilling and boring pilot hole in any soil strata by Drilling rig, collection of soil samples of different strata met with during drilling at various suitable levels, preservation of samples in polythene bags / sample boxes and disposal of excess soil or mud, including the cost for bentonite, water etc. as required to maintain the pilot hole properly as per specification ( IS : 2800 (part-I)) and direction of the Engineer - in - charge.... with contractor's rig... 100mm Dia |
| 120 | Reaming of pilot hole to an enlarged bore hole in any soil strata by drilling rig, disposal of excess soil or mud, including the cost for bentonite, water etc. as required to maintain the bore hole properly as per specification ( IS : 2800 (part-I)) and direction of the Engineer - in - charge.... with contractor's rig.... from 150 mm dia pilot hole to 350 mm bore hole |
| 121 | Washing of enlarged bore hole of 460 - 550 mm dia in any soil strata by drilling rig, disposal of excess soil or mud, including the cost for bentonite, water etc. as required to maintain the bore hole properly including lifting of drill pipes as per specification ( IS : 2800 (part-I)) and direction of the Engineer - in - charge..... with contractor's rig |
| 122 | Providing & lowering of UPVC pipe as per IS:12818 after washing of the bore hole by mini drilling rig as per specification and direction of the Engineer - in - charge…. with contractor's rig… UPVC'CM' casing pipes… 100mm dia |
| 123 | Providing and fixing of UPVC end cap / well cap suitable for UPVC 'CM' casing or 'CS' casing or 'RS' pipes as perspecification and direction of the Engineer - in - charge…. 100mm dia |
| 124 | Providing and fixing of UPVC reducer suitable for UPVC 'CM' casing or 'CS' casing or 'RS' pipes as per specification and direction of the Engineer - in - charge…. 125 x 100 mm dia |
| 125 | Providing and fixing of housing clamp ( made with 12 mm thick MS sheet ) along with well cap (made with 10 mm thick MS sheet ) with necessary arrangements for SBDTW as per specification and direction of the Engineer - in - charge…. 125 mm dia |
| 126 | Charges for lowering of UPVC pipe as per IS:12818 (issued from the department free of cost) after washing of the bore hole by mini drilling rig as per specification and direction of the… with contractor's rig… UPVC'CM' casing pipes… 100mm Dia |
| 127 | Providing and shrouding of the deep tube well assembly with washed pea gravels ( 2.0 - 4.75 mm effective size ) as per specification ( IS : 4097) and direction of the Engineer - in - charge….. with contractor's rig.. UPVC'CM' casing pipes… with pea gravels obtained from Golaghat, Assam. |
| 128 | Washing and development of tube well by using air compressor, and testing of the well as per specification ( IS :11189 ) and direction of the Engineer - in - charge… Upto 200 mtr pipe assembly.. with contractor's rig… using air compressor of 300 - 450 cfm output for SBDTW |
| 129 | Supply and erection of submersible pump of HP rating capacity with starter for lifting of water from well KS 6B Series KS6B-0511 model, pipe size 50 mm, head range 97 mtr, dischrage range 120LPM, Power rating 3.7 KW having capacity 5HP complete in all respect. |
| 130 | Supplying and fixing of Weather proof box made of hot moulded SMC sheet of SYNTEX or equivalant make of size 333mm X 233mm X 120mm complete with 4 Nos of Al Bus Bar of 63 A, 2 nos. cable gland, 2 nos. cables and also connection of the street light one 6A SP MCB compleate in all respects. |
| 131 | Wiring for light/ fan/ exhaust fan/ call bell point with 2x1.5 sq. mm PVC insulated copper conductor cable (FR) in PVC conduit (medium gauge) recessed in slab/ wall complete with 6/10 amp moduler type switch, switch board, cover plate, GI box including necessary connection etc. as required. |
| 132 | Wiring for 2 way controlling light point with 3x1.5 sq. mm PVC insulated copper conductor cable (FR) in PVC conduit (medium gauge) recessed in slab/ wall complete with 6/10 amp moduler type 2 way switch, switch board, cover plate, GI box including necessary connection etc. as required. |
| 133 | Providing and fixing of 3 pin 6/10 amps plug point with modular type 6/10 amps switch and socket including connection with 2 x 1.5 sq. mm PVC insulated Copper conductor cable (FR) on modular concealed switch board with cover plate earthing the 3rd pin etc. as required. |
| 134 | Providing and fixing of 3/6 pin 16/20 amps plug point with modular type 16/20 amps switch and socket including connection with 2 x 2.5 sq. mm PVC insulated Copper conductor cable (FR) on modular concealed switch board with cover plate earthing the 3rd pin etc. as required. |
| 135 | Wiring for Circuit/Sub-main wiring with the following sizes PVC insulated copper conductor cable (FR) in PVC conduit (medium gauge) recessed in slab/ wall etc. as required:-… 2 X 1.5 + 1 X 1.5 sq mm |
| 136 | Wiring for Circuit/Sub-main wiring with the following sizes PVC insulated copper conductor cable (FR) in PVC conduit (medium gauge) recessed in slab/ wall etc. as required:-…. 2 X 2.5 + 1 X 1.5 sq mm |
| 137 | Wiring for Circuit/Sub-main wiring with the following sizes PVC insulated copper conductor cable (FR) in PVC conduit (medium gauge) recessed in slab/ wall etc. as required:-… 2 X 4 + 1 X 1.5 sq mm |
| 138 | Wiring for Circuit/Sub-main wiring with the following sizes PVC insulated copper conductor cable (FR) in PVC conduit (medium gauge) recessed in slab/ wall etc. as required:-…. 2 X 6 + 1 X 2.5sq mm |
| 139 | Wiring for Circuit/Sub-main wiring with the following sizes PVC insulated copper conductor cable (FR) in PVC conduit (medium gauge) recessed in slab/ wall etc. as required:-… 4x4 + 2x1.25sq mm |
| 140 | Wiring for Circuit/Sub-main wiring with the following sizes PVC insulated copper conductor cable (FR) in PVC conduit (medium gauge) recessed in slab/ wall etc. as required:-… 2 X 10 + 1 X 4 sq mm |
| 141 | Supplying and fixing of the following sizes GI (in recess) and plastic (on surface) modular switch boards etc. as required. 1-2 module GI switch board:…. 5/6 amps piano type switch |
| 142 | Supplying and fixing of the following sizes GI (in recess) and plastic (on surface) modular switch boards etc. as required. 1-2 module GI switch board:… 5/6 amps piano type 2-way switch |
| 143 | Supplying and fixing of the following sizes GI (in recess) and plastic (on surface) modular switch boards etc. as required. 1-2 module GI switch board:… 16/20 amps piano type switch |
| 144 | Supplying and fixing of the following sizes GI (in recess) and plastic (on surface) modular switch boards etc. as required. 1-2 module GI switch board: 5/6 amps piano type call bell push |
| 145 | Supplying and fixing of the following sizes GI (in recess) and plastic (on surface) modular switch boards etc. as required. 1-2 module GI switch board:… 3 pin 5/6 amps piano type socket |
| 146 | Supplying and fixing of the following sizes GI (in recess) and plastic (on surface) modular switch boards etc. as required. 1-2 module GI switch board:…. 3/6 pin 16/20 amps piano type socket |
| 147 | Supplying and fixing of the following sizes GI (in recess) and plastic (on surface) modular switch boards etc. as required. 1-2 module GI switch board:…. Electronic 5 step fan regulator |
| 148 | Supplying and fixing of the following sizes GI (in recess) and plastic (on surface) modular switch boards etc. as required. 1-2 module GI switch board:…. Angle/batten holder |
| 149 | Supplying and fixing of the following sizes GI (in recess) and plastic (on surface) modular switch boards etc. as required. 1-2 module GI switch board:….. Ceiling rose |
| 150 | Supplying and fixing of the following sizes GI (in recess) and plastic (on surface) modular switch boards etc. as required. 1-2 module GI switch board:…. Buzzer Call bell |
| 151 | Supplying and fixing of the following sizes GI (in recess) and plastic (on surface) modular switch boards etc. as required. 1-2 module GI switch board:…. 1-2 module :- |
| 152 | Supplying and fixing of the following sizes GI (in recess) and plastic (on surface) modular switch boards etc. as required. 1-2 module GI switch board:…. 3 module :- |
| 153 | Supplying and fixing of the following sizes GI (in recess) and plastic (on surface) modular switch boards etc. as required. 1-2 module GI switch board:…. 4 module :- |
| 154 | Supplying and fixing of the following sizes GI (in recess) and plastic (on surface) modular switch boards etc. as required. 1-2 module GI switch board:…. 6 module :- |
| 155 | Supplying and fixing of the following sizes GI (in recess) and plastic (on surface) modular switch boards etc. as required. 1-2 module GI switch board:…. 12 module :- |
| 156 | Supplying and fixing of the following sizes modular type cover plates for GI/plastic modular switch boards etc. as required…. 1-2 module :- |
| 157 | Supplying and fixing of the following sizes modular type cover plates for GI/plastic modular switch boards etc. as required…. 3 module :- |
| 158 | Supplying and fixing of the following sizes modular type cover plates for GI/plastic modular switch boards etc. as required…. 4 module :- |
| 159 | Supplying and fixing of the following sizes modular type cover plates for GI/plastic modular switch boards etc. as required…. 6 module :- |
| 160 | Supplying and fixing of the following sizes modular type cover plates for GI/plastic modular switch boards etc. as required…. 12 module :- |
| 161 | Supply and fixing of 25mm PVC conduit along with accessories and MS boxes in recess / surface including cutting the wall and making good the same as required for telephone and LAN. |
| 162 | Supplying and fixing of the following sizes modular type cover plates for GI/plastic modular switch boards etc. as required. 1-2 module :-1-2 module :- |
| 163 | Supply and installation of plug - in type telephone socket outlet (RJ-11) with G.I.outlet box and cover plate complete as required….. RJ11 telephone socket outlet (1M):- |
| 164 | Supply and installation of plug - in type telephone socket outlet (RJ-11) with G.I.outlet box and cover plate complete as required….. TV socket outlet (1M):- |
| 165 | Supply and installation of plug - in type telephone socket outlet (RJ-11) with G.I.outlet box and cover plate complete as required….. Switch Board Indicator Lamp:- |
| 166 | Supply and installation of plug - in type telephone socket outlet (RJ-11) with G.I.outlet box and cover plate complete as required….. Blank plate (1M):- |
| 167 | Supply and installation of plug - in type telephone socket outlet (RJ-11) with G.I.outlet box and cover plate complete as required….. 20/25 amps single phase motor starter switch (2M):- |
| 168 | Earthing with 40 mm dia G.I. Earth pipe (medium gauge) 4.5 m. long complete with masonry enclosure on top CI cover plate size 12\\"x 12\\" having locking arrangement including CC work, holes on earth pipe etc. as required. |
| 169 | Extra for using salt (5 kg) and charcoal (46kg) for pipe earth electrode as required. |
| 170 | Proving and fixing / drawing of 4.06 mm dia (8 SWG) G.I. wire on surface or in existing G.I/ PVC/ Polythene pipe for loop earthing as required. |
| 171 | Supply and fixing of 25mm x 5mm GI strip on wall/ floor of the building for horizontal/ vertical run including necessary spacers and porcelain insulators at regular intervals. |
| 172 | Supplying & fixing of 900 mm sweep white color AC ceiling fan capacitor type double ball bearing complete with 300 mm down rod,canopies,shackles, 3nos blades, including wiring the down rod with 2x1.5 sqmm PVC insulated copper conductor cable(FR) |
| 173 | Supplying & fixing of 1200 mm sweep white color AC ceiling fan capacitor type double ball bearing complete with 300 mm down rod,canopies,shackles, 3nos blades, including wiring the down rod with 2x1.5 sqmm PVC insulated copper conductor cable(FR) conforming to IS 374 (1979), BEE 5 star. |
| 174 | Installation, testing and commissioning of ceiling fan i/c wiring the down rod of standard length (up to 30 cm) by 2 x 1.5 Sq.mm PVC insulated copper conductor cable etc as required. |
| 175 | Supplying & installation of 300 mm sweep 900 rpm metalic body exhaust fan including connection etc as required:- |
| 176 | Supplying & installation of shutter for 380/450 mm sweep metalic body exhaust fan in the existing hole as required:- |
| 177 | Supplying and installation of powder coated steel sheet enclosure (MCB DB) suitable for 240/415 volts MCB/Isolator/RCCB (SP/SPN/DP/TP/TPN/FP) complete with necessary bus bar, neutral link, din rail, earth bar etc i/c connection as required…. 2+4 / 6 way MCB DB (single door):- |
| 178 | Supplying and installation of powder coated steel sheet enclosure (MCB DB) suitable for 240/415 volts MCB/Isolator/RCCB (SP/SPN/DP/TP/TPN/FP) complete with necessary bus bar, neutral link, din rail, earth bar etc i/c connection as required…. 2+6 / 8 way MCB DB (double door):- |
| 179 | Supplying and installation of powder coated steel sheet enclosure (MCB DB) suitable for 240/415 volts MCB/Isolator/RCCB (SP/SPN/DP/TP/TPN/FP) complete with necessary bus bar, neutral link, din rail, earth bar etc i/c connection as required…. 2+10 / 12 way MCB DB (double door):- |
| 180 | Supplying & fixing of following ratings MCB B/C curve having breaking capacity 10 KA in the existing MCB DB including connection as required:-...6 to 32 amps DP MCB:- |
| 181 | Supplying & fixing of following ratings MCB B/C curve having breaking capacity 10 KA in the existing MCB DB including connection as required:-...40 amps DP MCB:- |
| 182 | Supplying & fixing of following ratings isolator in the existing MCB DB including connection etc as required:-… 40 amps DP isolator:- |
| 183 | Supplying & fixing of following ratings isolator in the existing MCB DB including connection etc as required:-… 63 amps FP isolator:- |
| 184 | Supplying and fixing of following luminaries complete with necesaary accessories and connection etc. as required (Commercial lighting fixtures with 50,000 burning hours):-... Decorative wall mounting fancy bracket light fixture suitable for GLS or retrofit CFL/LED (without lamp) : - |
| 185 | Supplying and fixing of the following Lamps & accessories including connection etc. as required…. 14/15 watt retrofit CFL:- |
| 186 | Supplying and fixing of following surface/recess mounted LED luminaries in powder coated die cast housing complete with high efficiency polycarbonate diffuser and necessary connection etc. as required (with 50000 burning hours and minimum lumen output of 100 lm/watt):-... Surface mounted integrated 10 watt LED batten with polycarbonate diffuser:- |
| 187 | Supplying and fixing of following surface/recess mounted LED luminaries in powder coated die cast housing complete with high efficiency polycarbonate diffuser and necessary connection etc. as required (with 50000 burning hours and minimum lumen output of 100 lm/watt):-.... Surface mounted integrated 20 watt LED batten with polycarbonate diffuser:- |
| 188 | Supplying and fixing of following surface/recess mounted LED luminaries in powder coated die cast housing complete with high efficiency polycarbonate diffuser and necessary connection etc. as required (with 50000 burning hours and minimum lumen output of 100 lm/watt):-... Surface mounted round/Square shaped 6/7 watt LED downlight with integral driver and high quality polycarbonate diffuser:- |
| 189 | Supplying and fixing of following surface/recess mounted LED luminaries in powder coated die cast housing complete with high efficiency polycarbonate diffuser and necessary connection etc. as required (with 50000 burning hours and minimum lumen output of 100 lm/watt):-.... Surface mounted round/Square shaped 12 watt LED downlight with integral driver and high quality polycarbonate diffuser:- |
| 190 | Supplying and fixing of following outdoor LED luminaries in powder coated die cast housing complete with heat resistant tempered glass/diffuser including necessary connection etc. as required (50000 burning hours and minimum lumen output of 100 lm/watt):-... 6 watt/10 watt LED Bulkhead light with high quality polycarbonate diffuser (IP 65):- |
| 191 | Supplying and fixing of following LED Tubes, retrofit bulbs/lamps for LED luminaries including necessary connection etc. as required:-…. 9 watt LED retrofit lamp with polycarbonate body and aluminium heatsink :- |
| 192 | Supplying and fixing of following LED Tubes, retrofit bulbs/lamps for LED luminaries including necessary connection etc. as required:-… 12 watt LED retrofit lamp with polycarbonate body and aluminium heatsink :- |
| 193 | Supplying and laying of the following sizes XLPE insulated PVC sheathed aluminium conductor armoured cable with necessary connection etc as required….. 3.5 core 50 Sq mm |
| 194 | Supplying and fixing of aluminium terminal ends (LUGS) - long barrel of following sizes : -…. 50 sq mm |
| 195 | Supplying and fixing of heat shrinkable straight through cable jointing kits of following sizes : -…. 2 core 16 sqmm or 4 core 10/16 sq mm size:- |
| 196 | Supply and drawing of 2 pair,0.61mm dia unarmored PVC insulated and PVC sheathed annealed tinned copper conductor telephone cables in recessed/surface conduit and termination complete as required. |
| 197 | Supply drawing connecting testing and commissioning of TV Coaxial cable RG 6 in existing conduit |
| 198 | Supply, Installation, testing & Commissioning of 8W LED Mirror Light complete as required. |
| 199 | Supply, Installation, testing & Commissioning of end termination Gland/couplour as complete as required. |
| 200 | Providing installation and commisioning of TECHNICAL DETAILS OF WATER DISPENSING UNIT OF CAPACITY 250LITRES PER HOUR Micron Filter of size 65mm. dia x 5L0mm. ht. and UV Sterilizer - 5 Nos. set as complete as required. |
| 201 | Supply, Installation, testing & Commissioning of Split AC (1.5ton) complete as required. |
| 202 | Providing installation and commisioning of Filter Feed Pump - 2 Nos. (1 Working + 1 Standby)of Kirloskar or similar make of capacity 2Om3/hour at 30 meter head @ 5 HP with accessories & mounting for 02 nos. filter feed pump including Iron removal system (1No) of capacity 20m3/hour and Activated carbon filter (1 no.) of capacity 20m3 per hour set as complete as required. |
| 203 | Wooden Half Secretariat table of 121.9x91.5x76.2cm 4'x3'x2.5' with three drawers in the right hand side along wit one tea try made of Teak/Karai wood with complete polishing and varnishing… Formica Top |
| 204 | Full secretariat table of 152.4x91.5x76.2cm/ 5'x3'x2.5' with one drawer & cup board in the right hand side alog with one tea tray & three drawers in the left side with all sides including the top would be blended with Formica/ Sun mica to be fixed on 4mm commercial ply to be fitted on gumai/ Teak/ Karai wood with complete and polishing and varnishing.... Formica Top |
| 205 | Laboratory Table of 8'x4''x3.5' nad legs of 3\\"x3\\" top 1.25\\" thick shelf plank 3/4' thick and shelf 15\\" above the bottom of each cup-board made of Gumai/ Teak wood, Polishing complete & varnishing |
| 206 | Newspaper table of 182.4cmx106.7widthx30.4(6'x3 1/2'x12\\"')flat in the middle of the table having 6 legs of (2 1/2'x 20\\"x 2 1/2') having height of 33\\" in the middle of the table 76.2cm (2 1/2') in other two sides provided with strong foot rest made of Teak/ Karai with complete polishing and varnishing |
| 207 | White Board of 8'x4' with hanging system made of teak/ Karai wood with complete polishing and varnishing |
| 208 | White Board of 4'x3' with hanging system made of teak/ Karai wood with complete polishing and varnishing |
| 209 | Vip Sofa Set four seated with 4\\" cushion and back 2\\" foam and best qualiy cloth with centre table (with glass top) made of Teak/ Karai wood with complete polishing and varnishing |
| 210 | Vip Sofa Set five seated with 4\\" cushion and back 2\\" foam and best qualiy cloth with centre table (with glass top) made of Teak/ Karai wood with complete polishing and varnishing |
| 211 | Notice board of 121.9x91.5x10.2cm (4'x3'4\\") with barfinet in the front of the board with locking arrangement made of Teak/ Karai wood with complete polishing and varnishing |
| 212 | Steel Rack (almirah Type) with seven shelves including top & bottom with six compartment. Each compartment height 12\\" inch and front side open without Door. Three side covered by 20 Gauge sheets. Size - 78\\"x40\\"x14\\" Make: Godrej, Neelkamal |
| 213 | Steel Rack (almirah Type) with seven shelves including top & bottom with six compartment. Each compartment height 12\\" inch and three side covered by 20 Gauge sheets. Front side with sliding glass Door in Three part.Size - 78\\"x40\\"x14\\" Make: Godrej, Neelkamal |
| 214 | Glass door steel book case (with four shelves) Almirah, Size - 78\\"x36\\"x18\\" 22 Gauge Make: Godrej, Neelkamal |
| 215 | Godrej Interio Color PCH-7003D - Office Visitor Chair with Arm for Guest SeatingGodrej Interio Color PCH-7003D - Office Visitor Chair with Arm for Guest Seating |
| 216 | Special Executive Revolving chair with soft fome raxin (hydrolic) seat and back with high back(specila Quality) Standard Size. Make: Godrej |
| 217 | Supply, Installation, testing & Commissioning of Components of VAC Smart Class Room complete as required. Please Enable Macros to View BoQ information |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
