|
| 1 | R.C.C. work of M20 having minimum compressive strength (working stress) 200kg./cm2 in 15cm cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using 12mm to 20mm size (1/2” to 3/4”) crusher broken hard black granite chips of 20mm size (not to exceed 25%) of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary as per direction of the Engineer-in-charge including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. |
| 2 | Lintel FF |
| 3 | Roof Beam FF |
| 4 | Roof Slab FF Chajja |
| 5 | Stair Case FF |
| 6 | Straightening, cutting, bending and binding, welding and jointing (if necessary) coiled/bent up M.S. rods/Tor Steel/deformed rods etc. including hoisting, placing in position, tying the grills binding with 18 to 20 guage binding wire required for R.C.C. work including cost, conveyance, taxes of all materials, cost of all labour, T&P etc. as required for the work complete (weight of binding wires will not be considered) as directed by Engineer-in-charge. (Payment will be made on actual weight of M.S. rods or Tor steel linear measurements of rod for finished item of works. 5 % wastage and lap length are included in the finished rate). |
| 7 | First class Fly Ash brick work in cement mortar (1:6) in Super Structure with best quality bricks having crushing strength from 75kg/cm2 to 99kg/cm2, immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes moulding, chamfering, corbelling etc. complete as per drawing, design and specification, watering and curing for 7 days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer-in-charge. |
| 8 | Providing 2.5cm thick grding cement concrete (1:2:2) on roof slab with 6mm size CBHG chips including cost, conveyance, royalty, taxes of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge. |
| 9 | Providing 6mm thick plaster in C.M. (1:4) over ceiling, chajja, loft, staircase, column, beams and walls after removing the false if necessary and close deep chipping including rounding of the corners, recess and roughening concrete surface where necessary, watering and curing, finished smooth over R.C.C. surface, including cost, conveyance, royalty, taxes of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge. |
| 10 | Providing 16mm thick plaster in C.M. (1:6) over Brick massonary work racking out the joints finsihed smooth to proper line and plumb , watering and curing for 7days with cost, conveyance, royalty, taxes of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge. |
| 11 | Providing 12mm thick plaster in C.M. (1:6) over Brick massonary work racking out the joints finsihed smooth to proper line and plumb , watering and curing for 7days with cost, conveyance, royalty, taxes of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge. |
| 12 | Supplying , fitting and fixing of 35mm thick M.S. Grill Window & Door (shutter) with M.S. Grill and iron fittings fixed in proper possition for window & shutter including all cost labour and materials T&P etc. all complete as per direction of Engineer-in-charge. |
| 13 | Supplying, fitting and fixing vetrifed tile in floors of size 600mm x 600mm of approved make confirming to IS 13755 laid on 20 mm thick cement mortar 1:4 and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer in charge.( For new work only) |
| 14 | Fixing Antiskied Tiles in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles all complete with cost of precast tiles conveyance, royalty, taxes of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge. |
| 15 | Fixing Tiles to dados skirting & risers of steps on 12mm. thick C.P (1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles all complete with cost of precast tiles conveyance, royalty, taxes of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge. |
| 16 | Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. |
| 17 | Finishing inside walls with two coats of plastic Emulison paint of approved shade on new work to give an even shade over a coat of primer including cost of all labour ,materials & P with taxes ,transportation etc all complete. |
| 18 | Finishing outside walls with two coats of weather coat paint of approved shade on new work to give an even shade over a coat of primer including cost of all labour ,materials & P with taxes ,transportation etc all complete. |
| 19 | Painting two coats of synthetic enamel paint over a coat of primer, to Iron works as per approved quality over a coat of primer , sand papering, polishing the surface, including cost, conveyance, taxes of all materials, cost of all labour, T&P etc. as required for the work complete in all floors as per direction of the Engineer-in-charge. |
| 20 | Supplying all materials ,labour,T&P fitting ,fixing of PVC Door with hinges,aldrops and locking arrangement etc all complete |
| 21 | Supplying, fitting & fixing up window (sliding type) made up aluminium section 9778 as window frame section No. 4095, 4096 and 9777, 3994 as shutter frame with 5mm. thick plain glass as panel fitted with rubber bending including lucking arrangement including all fittings including cost of materials all taxes, labour, T & P excluding cost of glass etc complete as per direction of Engineer in Charge. |
| 22 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32 mm x 32 mm x 2 mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.C/C and stainless square pipe bracing of size case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. |
| 23 | Suplying all materials, Labour, T&P,fitting, fixing of Rural Pan, Trap and Foot Rest etc all complete. |
| 24 | Suplying all materials,Labour,T&P ,fitting,fixing of Laying of 110 mm OD PVC Pipes in trenches Including Earthwork in Excavation etc all complete. |
| 25 | Suplying all materials,Labour,T&P ,fitting,fixing of Wall or ceiling with PVC Pipe with ASTMD-1785(Schedule-80) of the following nominal size including cost and carriage etc all complete.25 mm |
| 26 | Suplying all materials,Labour,T&P ,fitting,fixing of Brass or Gun Metal Full Way Valve |
| 27 | 15MM CP Bib cock |
| 28 | Supplying all Materials,labour,T&P for Installation of 1000 Ltrs capacity PVC Water Tank over Roof slab Including 15 mm Brick masonary Staging Including Other ancillary items etc all complete |
| 29 | Suppling all materials, labour, t&p for Fixing Water Closet (European pattern W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification. (Seat and cover to be measured and paid for separately) |
| 30 | Supplying of all materials,labour,T&P for fixing 10 Ltrs capacity PVC Low Level cistern with a pair of PVC brackets complete with fitting such as siphonic arrangement ,15 mm nominal size brass/PVC ball valve with ploythene float chromium plated brass handle,unions and couplings for connection with inlet,outlet and overflow pipes,32 mm dia PVC long flush bend ,12 mm dia PVC inlet connection pipe,15 mm dia CP Angle stop cock including cutting holes and making good the same and connecting the flush bend with cistern and closet and inlet pipe with supply main etc all complete as per specification and direction of Engineer-in-charge. |
| 31 | Supplying of all materials,labour,T&P for fixing wash hand basin with hole for pillar cock with cast iron/M.S. brackets painted white including cutting holes in walls and making good to the damages etc all complete as per specification and direction of Engineer-in-charge. |
| 32 | Fixing of Angle stop cock capstan head screw down,high pressure,lettered with long screws,shanks and back nuts of the following nominal bore as per specification and direction of Engineer-in-charge. |
| 33 | Fixing of Short Body Bib Cock capstan head screw down,high pressure,lettered hot &cold with long screws,shanks and back nuts of the following nominal bore as per specification and direction of Engineer-in-charge. |
| 34 | Fixing of pillar cock capstan head screw down,high pressure,lettered with long screws,shanks and back nuts of the following nominal bore as per specification and direction of Engineer-in-charge. |
| 35 | Supplying all labour and T&P for fitting and fixing the following G.I./PVC/SWR fittings as per P.H. Specification and direction of Engineer in-Charge. 110 m dia Door T |
| 36 | 110mm dia plain Bend |
| 37 | 110mm dia door Bend |
| 38 | C.P Gatting |
| 39 | supplying all materilas labour and T&P for fixing of soap holder fixed to wooden plugs with chromium plated brass screws and washers etc all complete as per specification. |
| 40 | Supplying fitting and fixing of 1Hp Mono Block pump with all acessories including cost of all materials and labour etc complete. |
| 41 | Point wiring in PVC conduit with piano type Switch: Recessed/Surface wiring to Light Point / Fan Point / Exhaust Fan Point / Call Bell point with 1.5 sq.mm. FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non- metallic PVC flexible conduit with 5 Amp. 250 Volt. piano type Switch of ISI marked and ceiling rose of ISI marked mounted on M.S. box having front bakelite cover of suitable size, M.S. box with 1.0 sq.mm. FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection as per the direction of the Engineer-in-Charge. (Make of wire - Finolex / L&T / Anchor / Havels / V Guard) (SR Sl. No.1.2)Group - A (Light Point- 4 nos., Fan Point- 2 nos.) |
| 42 | Group- b(Light Point-4nos, Fan Point-02 nos,Exhaust Fan Point-3 nos.) |
| 43 | Group-c ( Light Point-04 nos.) |
| 44 | Power Plug wiring in PVC conduit (2 x 4sq.mm): Recessed/Surface wiring for Light / power plug with 2 x 4 sq.mm. FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non- metallic PVC flexible conduit along with 1 x 2.5sq.mm. FR PVC insulated single core multistrand copper conductor for loop earthing as required as per the direction of the Engineer-in-Charge. (Make of wire - Finolex / L&T / Anchor / Havels / V Guard) (SR Sl. No.1.5) (For 1 no. 15Amp. Plug Point) |
| 45 | S/F Power plug point piano type accessories: Supply and fixing of metal box of 180mm x 100mm x 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated front cover in front including providing and fixing of 6 pin 5 / 6Amps. and 15 / 16Amps.socket out let and 15 / 16Amps. piono type Switch, connection, painting etc. as required as per the direction of the Engineer-in-Charge. (SR Sl. No.1.27) |
| 46 | Power plug wiring in PVC conduit (2x2.5Sq.mm) Recessed / Surface wiring for light /Power plug with 2 x 2.25sq.mm. FR PVC insulated single core multistand copper conductor of ISI marked with 20mm dia non- metalic PVC flexible conduit along with 1 x 1.5sq.mm. FR PVC icsulated single core multistrand copper conductorfor loop earthing as required as per the direction of the Engineer in charge. (Make of wire - Finolex / L&T / Anchor / Havels / V Guard) (Sr Sl. No. 14) (For 3 nod. sAmp. plug points) |
| 47 | S/F light plug point Type acessories supplyi and fixing of metal box of 150mm x 75mm x 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated front cover in front including providing and fixing of 3pin 5/6 Amp socket out let and 5/6 Amps. piano type switch connection painting etc as required as oper the direction of the Engineer in charge (SR Sl. No. 1.26) |
| 48 | S/F Piano type Switch / Socket: Supply and fixing of the following Piano type Switch / Socket of ISI marked on the above Board / Cover including all connections etc. as required as per the direction of the Engineer-in-Charge. (SR Sl. No.1.25)A) 5 / 6 Amp. 250 Volt. Piano type Switch (SR Sl. No.1.25.1) |
| 49 | 3 pin 5/6 Amps. Piano type Socket out let (SR Sl. No.1.25.4) |
| 50 | Circuit / Sub-Main wiring in PVC conduit (2 x 1.5sq.mm + 1 x 1.5sq.mm): Recessed/Surface wiring to Sub-Main in 2 x 1.5 sq.mm. FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694 / 1990 with 20 mm dia non- metallic heavy duty PVC flexible conduit 1.6mm along with 1 x 1.5sq.mm. FR PVC insulated single core multistrand copper conductor as earth wire as required as per the direction of the Engineer-in-Charge. (Make of wire - Finolex / L&T / Anchor / Havels / V Guard) (Sl. No.1.8.1) |
| 51 | Circuit / Sub-Main wiring in PVC conduit (2 x 2.5sq.mm + 1 x 1.5sq.mm): Recessed wiring to Sub-Main in 2 x 2.5 sq.mm. FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694 / 1990 with 20 mm dia non- metallic heavy duty PVC flexible conduit 1.6mm along with 1 x 1.5sq.mm. FR PVC insulated single core multistrand copper conductor as earth wire as required as per the direction of the Engineer-in-Charge. (Make of wire - Finolex / L&T / Anchor / Havels / V Guard) (SR Sl. No.1.8.2) |
| 52 | Circuit / Sub-Main wiring in PVC conduit (2 x 24sq.mm + 1 x 1.5sq.mm): Recessed wiring to Sub-Main in 2 x 4 sq.mm. FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694 / 1990 with 20 mm dia non- metallic heavy duty PVC flexible conduit 1.6mm along with 1 x 1.5sq.mm. FR PVC insulated single core multistrand copper conductor as earth wire as required as per the direction of the Engineer-in-Charge. (Make of wire - Finolex / L&T / Anchor / Havels / V Guard) (SR Sl. No.1.8.2) |
| 53 | S/F SP MCB DB: Supply and fixing of the following way single pole and neutral, sheet steel, MCB dustribution board 250 Volts on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, dib bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing as required as per the direction of the Engineer-in-Charge. (But without MCB/RCCB/Isolator) (Sl. No.2.3). A) 4 way, Single door (SR Sl. No. 2.3.1) |
| 54 | S/F \\"B\\" SERIES, SP MCB : Supply and fixing of 6 Amp to 32 Amp rating 240 Volts \\"B\\" searies Miniature Circuit Braacker (MCB) for lighting and otherr loads of the following poles in the existing MCB DB ISI marked comple with connections, testing and commissioning etc. as required as per the direction of the Engineer-in-Charge. (SR Sl. No.2.6). (B) Single Pole and Neutral (SP&N) (SR Sl. No.2.6.2) |
| 55 | S/F Brass Holder: Supply and fixing of Batten Holder / BK Angle Holder of ISI marked including all connections etc. as required as per the direction of the Engineer-in-Charge. (SR Sl. No.1.29) |
| 56 | SITC of Main Switches: Supply, installation, Testing and Commissioning of Main Switches IS-13940 Part-III / 1983) of following capacity on existing surface / wall mounting and complete with HRC Fuse lionks, interconnections, earthing, etc. as required as per the direction of the Engineer-in-Charge. (Make- SEIMENS / HPL / ANCHOR / L&T / HAVELS / C&S / RK) (SR Sl. No.2.15)A) 32Amp. D.P. Main Switches (SR Sl. No.2.15.1) |
| 57 | Supply and fixing of 48” (1200mm) Ceiling Fan complete with down rod without regulator etc. complete with transportation, T&P and labour charges as per the direction of the Engineer-in-Charge. |
| 58 | Supply and fixing of Mini Fan Regulator Rotary Step for suitable for above ceiling Fan etc. complete with transportation, T&P and labour charges as per the direction of the Engineer-in-Charge. |
| 59 | Supply and fixing of Baton integrated 20 Watt. LED Tube Light intergral sleek extruded polycarbonate LED Channel with white acrylic cover etc. complete with transportation, T&P and labour charges as per the direction of the Engineer-in-Charge. (MAKE: BAJAJ / HAVELLS / CROMPTON / PHILLIPS) |
| 60 | Supply and fixing of superior type C.I bulk head fitting for general domestic use square / oval type with pre -metallic glasas cover provided with galvanized steel wire guard with 9 watt. LED lamp including necessary conections (Provisional Rate) Please Enable Macros to View BoQ information |
