|
| 1 | Civil Work |
| 2 | 5.10.7Dismalting old plaster and pointing in cement or lime and racking out joints to 15mm depth watering and disposal of unserviceable materials with all leads all complete as per direction of E/I |
| 3 | 5.10.4Dismalting patent stone floor do-do-all complete job as per direction of E/I |
| 4 | 5.10.10Taking down old doors and windows shutter do-do-all complete job as per direction of E/I |
| 5 | 5.10.11Taking down chaukhat of doors do-do-all complete job as per direction of E/I |
| 6 | 5.10.12Taking down chaukhat of windows do-do-all complete job as per direction of E/I |
| 7 | DSR 10.14.2.1Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by E/I |
| 8 | 5.4.32Supplying fitting and fixing 35mm thick solid core type non decorative single leaf flush shutters do-do all complete job as per deirection of E/I |
| 9 | 5.8.32 Providing two coats of synthetic emamel paint of approved shade and make over new wooden surface do-do-all complete job as per direction of E/I |
| 10 | DSR 21.1.2.3Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architecturaldrawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 11 | DSR 21.2.1Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge. |
| 12 | DSR 21.3.2Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 13 | 11.23.5MARBLE stone flooring with 18mm (thick marble stone as per sample of marble approved by ENGINEER in charge over 20mm average )thick base of cement mortar 1:4 ( 1 Cement :4 coarse sand ) laid and jointed with grey cement slurry including rubbing and polishing complete with UDAIPUR Green marble |
| 14 | 5.6.23.2Providing and laying 6mm thick precast white glazed tiles in wall do-do-all complete job as per direction of E/I |
| 15 | 11.40Providing and laying 300×300 mm size ceramic floor tiles do-do all complete job as per direction of E/I |
| 16 | 5.6.28Providing and laying double charge vitrified floor tiles do-do all complete job as per direction of E/I |
| 17 | 5.6.19. Providing and laying 25mm thick Kotah stone slab flooring of approved size texture and colour over 19mm thick base of lime motar(1:1:1)( limeputty:surkhi:coarse sand)laid over and jointed with grey Cement slurry mixied with pigment to match the shade of slab including rubbing and polishing to granolithic finish with approved qualityof carborandum stone including cost of curing taxes and royalty all complete as per building specifications and direction of E/I. (iv) 600x600 mm |
| 18 | 5.4.50Providing 50X150mm teak wood handrail with good quality of teak wood of av. 2.5M length with smooth finishing and rounded edges properly fitted to the railing including cost ofspreet polishing of approved shade and make all complete as drawig specification and direction of E/I. |
| 19 | 5.5.12Supplying and fixing M.S.grill made of 20×6mm M.S flat do-do all complete job as per direction of E/I |
| 20 | 5.5.14Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2mm at 100mm centers and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40 x 40 x 6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification and direction of E/I. |
| 21 | 5.5.29Supplying fitting and fixing 20 gauge G.C.I sheet gate do-do all complete job as per deirection of E/I |
| 22 | 5.8.41Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I.) |
| 23 | 5.8.45Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I |
| 24 | 12.41Providing and fixing on wall face unplasticised Rigid PVC rain waterpipes conforming to IS : 13592 Type A, including jointing with sealring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes.12.41.2 110 mm diameter |
| 25 | 12.42Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 26 | 12.42.1.2 110mm dia coupler |
| 27 | 12.42.5.2 110mm dia Bend |
| 28 | 12.42.6.2 110mm dia shoe |
| 29 | 12.43.2 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110 mm dia |
| 30 | 5.7.3 Providing 12mm thick cement plaster (1:6)do-do-all complete job as per direction of E/I |
| 31 | 5.8.9Extra for cleaning the old surface the entire old white wash or colour wash do-do all complete job as per direction of E/I |
| 32 | 13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 33 | 5.8.18 Poviding two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I. |
| 34 | 13.47.1Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: |
| 35 | 22.14Grading roof for water proofing treatment with22.14.1Cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20mm nominal size) |
| 36 | 14.91 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/5cm. Tear strength in longitudinal and transverse direction as 300/ 250N |
| 37 | DSR 14.92 Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation |
| 38 | 3.2.1Supplying fitting and fixing vitreous white glazed earthen ware I.W.C -do- do all complete job as per direction of E/I 510 mm long with 10 liter low level PVC cistern |
| 39 | 3.2.3Supplying fitting and fixing vitreous white glazed earthen ware Urinal do- do all complete job as per direction of E/I b - standing corner ( 600mm x 350 mm ) |
| 40 | 3.2.5 supplying fitting and fixing vitreous white glazed earthen ware wash hand basin -do- do all complete job as per direction of E/I |
| 41 | 3.1.5.1Providing and fixing 15 mm dia male ended brass bib cock of approved quality (wt. not less than 350 gms. ) with extra socket all complete as per specification and direction of E/I. |
| 42 | 3.1.6Providing and fixing 15 mm dia brass Stop cock of approved quality all complete as per specification and direction of E/I. |
| 43 | DSR 18.64 Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms |
| 44 | DSR 17.73Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.17.73.1 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms |
| 45 | DSR 17.72Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 46 | DSR 18.65Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. |
| 47 | DSR 17.32Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :17.32.2Rectangular shape 453x357 mm |
| 48 | DSR 18.58.2 Rectangular type with openable circular lidDSR 18.58.2.1150 mm nominal size square 100 mm diameter of the inner hinged round grating |
| 49 | DSR 19.6Providing and laying non- pressure NP2 class ( light duty ) R.C.C. pipes with collars jointed with still mixture of cenent mortar in the proportion of 1:2 ( lcement : 2 fine sand ) including testing of joints etc. complete. |
| 50 | DSR 19.6.2150 mm dia R.C.C. pipe |
| 51 | DSR 17.10Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink asper IS:13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making goodthe walls wherever required :17.10.1 Kitchen sink with drain board17.10.1.1510x1040 mm bowl depth 250 mm |
| 52 | DSR 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc |
| 53 | DSR 18.8.1 15mm dia |
| 54 | DSR 18.8.2 20mm dia |
| 55 | DSR 18.8.3 25mm dia |
| 56 | DSR 18.8.4 32mmdia |
| 57 | DSR 18.48Providing and placing on terrace (at all floor levels ) polyethylene water storage tank ,IS 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 58 | JSOR 2022 Item No. M 195 (i) Part 'A' + 10% CPSupplying, fitting and fixing 50mm x 50mm x 6mm angle iron frame in choukhat for doors with M.S clamp proerly fishtalled 150mm long of 40 x 6mm flat including making holes and |
| 59 | 5.5.28Labour for fabricating, erecting, hoisting and fixing in position structural steel work in R.S. joist, channel, Angle, Tee, flat, plate, latice member, built up compound section in column, girder, staircase or truss including cost of gusset plates, holding down bolts, anchor plates at all heights and depths, bolting, welding (machining wherever necessary) with applying a priming coat of red lead paint all complete as per approved drawing, building specification and direction of E/l. |
| 60 | 5.10.33Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I. |
| 61 | DSR 4.17Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. |
| 62 | 5.10.3Dismantling R.C.C. work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 63 | 5.3.11R.C.C. Work in beams, suspended floors, roofs having slope upto 15° landing, balconies, shelves, chajjas, lintels, bands, plain window sills, staircase and spiral stair cases above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand (zone - III ) : 3 graded stone aggregate 20 nominal size) |
| 64 | 5.3.17.20Centering and Shuttering including strutting, propping etc. And removal of form for Suspended floors, roofs, landings, balconies and acces platorm with water proof ply 12mm thick |
| 65 | 5.7.15Providing 19mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 66 | 5.5.4Providing Tor steel reinforcement of 8 mm dia rods as per approved design and drawing excluding carriage of bars to work site cutting bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per builing specification and direction of E/I. 8 mm dia - TMT Fe 500 (Onaly valid for SAIL, TATA Stee, JSPL, Electro Steel Ltd and Vizal Steel) |
| 67 | 5.10.1Dismantling pucca brick or lime work including stacking serviceable materials in............do...... all leads all complete as per direction of E/I. |
| 68 | 5.2.11Providing designation 75 A brick work in C.M. (1: 6) in superstructure.............do......... all complete as per building specification and direction of E/I. |
| 69 | 5.7.3Providing 12mm cement plaster (1:6) with clean coarse sand.............do......... all complete as per building specification and direction of E/I. |
| 70 | 5.3.1Providing and laying in P C.C.M.200 with nominal mix of (1:1.5:3) do -all complete job as per direction of E/I |
| 71 | Carriage of materials do-do all complete job asper direction of E/I |
| 72 | Bricks (1K+25P) = 26 km |
| 73 | Coarse Sand (2K+28P= 30 Km ) |
| 74 | Stone Chips (30 Km ) |
| 75 | Cement (30 Km ) |
| 76 | Steel (30 Km ) |
| 77 | Note:- OF MAKE (1)PVC insulated copper conductor wire of make:-Havell's/Polycab/Finolex/Anchor/Nitcab (2)PVC conduit of thickness 1.5mm/2mm for wiring:-Polycab/ANCHOR/AKG (3) GI modular box of make -: Anchor/ Havells/Legrand/ABB (4)Switches/scoket outlet for modular type:- Anchor(roma) / Havells(cabtree) / C&S/ Legrand (5)MCCB,MCB,SFU,CHANGEOVER,RCCB,MCB-DB:Havell's/L&T/Legrand/Schneider/C&S (6)XLPE/PVC aramoured cable:-Havell's/Polycab/V-guard/Finolex (7) LED FTTING FIXTURE -: Havells/Bajaj/Crompton/C&S (Model/as per E/I ) (8) CEILING / WALL / EXHAUST FAN -: Havells / Bajaj / Usha (Model/as per E/I) (9)OCTAGONAL POLE/High Mast-: Bajaj/Philips/Surya/Valmont/RR Ispat/Transrail (10) CENTRALISED AIR CONDITIONING-:VOLTAS/MITSHUBISHI/TOSHIBA/DAIKIN (11)ALL ELECTRICAL WIRING WORK SHOULD BE CONCEALED (12)CCTV CAMERA /DVR-:Panasonic/Hik vision/C P Plus/Godrej (13)Monitor Camera -: Dell/Samsung/LG/Asus (14)Silent type D.G Set-:Kohler/Jakson/Sterling/Mahindra |
| 78 | 1.3 Point wiring in PVC conduit, with modular type switch:-Wiring for light point/fan point/exhaust fan point/call bell point with 1.5. sq.mm FR PVC Insuleted copper conductor single core cable in recessed PVC conduit, with modular type switch, pheonlic lamineted sheet,suitable size G.I.box etc. |
| 79 | 1.3.1Group A |
| 80 | 1.4Twin control point wiring PVC conduit with modular type switch:-wiring for Twin control point with 1.5 sq mm FR PVC Insuleted copper conductor single core cable in recessed PVC conduit, 2 way modular, switch, pheonlic lamineted sheet,suitable size G.I.box etc.as required. |
| 81 | 1.5Power plug wiring in PVC conduit (2x4 sq mm) :- Wiring for light/Power plug with 2x4 sq mm FR PVC insuleted copper conductor single core cable in recess PVC conduit along with 1 Nos. 4 sq mm FR PVC insuleted copper conductor single core cable for loop earthing as required. |
| 82 | 1.7Circuit/submain wiring in PVC conduit:-Wiring for circuit/submain wiring along with earth wire with the following size PVC insuleted copper conductor single core cable in recessed PVC conduit as required |
| 83 | 1.7.12x1.5 sq mm+1x1.5 sq mm earth wire |
| 84 | 1.7.22x2.5 sq mm+1x2.5 sq mm earth wire |
| 85 | 1.7.42x6.0 sq mm+1x6.0 sq mm earth wire |
| 86 | 1.7.52x10.0 sq mm+1x6.0 sq mm earth wire |
| 87 | 1.17TV cable in existing conduit :- Supplying and drawing co-axial TV cable RG-6 grade copper conductor,PE insulated,with PVC sheath in the existing recessed PVC conduit as required. |
| 88 | 1.21S/F PVC conduit :- supplying and fixing of following sizes PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case recessed conduit as required . |
| 89 | 1.21.120mm |
| 90 | 1.22S/F PVC/G.I. boxes :- Supplying and fixing PVC/G.I. box of following sizes on surface or in recess with suitable size of phenolic laminated sheet cover infront including painting etc as required . |
| 91 | 1.22.9210mm x206mm x 48 deep/(10\\" x 12\\") |
| 92 | 1.24S/F modular type switch /socket :- Supplying and fixing following modular type switch box/cover including connections but excluding modular plate etc as required |
| 93 | 1.24.15/6 amps, one way switch |
| 94 | 1.24.315/16 amps, one way switch |
| 95 | 1.24.45/6 amps, 3 pin socket outlet |
| 96 | 1.24.7TV socket socket outlet |
| 97 | 1.25S/F Modular type electronic fan regulator:-Supplying and fixing stepped type fan regulator on the existing modular plate switch box including connectionons but excluding modular plate etc, as required. |
| 98 | 1.27S/F Modular boxes, base & covre plate:-following size/ modular G.I box along with modular base & cover plate for modular switches in recess etc, as required. |
| 99 | 1.27.11 or 2 module(78mm x 78mm x 45mm) |
| 100 | 1.27.36 module(78mm x 205mm x 50mm) |
| 101 | 1.31S/F light plug point with modular type accessories:- Supplying and fixing suitable size G.I.box with modular plate and cover in front on recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch conection painting etc, as required. |
| 102 | 1.32S/F power plug point with modular type accessories:- Supplying and fixing suitable size G.I.box with modular plate and cover in front on recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular switch conection painting etc, as required. |
| 103 | 1.33S/F ceiling rose:-Supplying and fixing 2 pin 5 amp, ceiling rose on the existing junction box/wooden block including connection etc as required. |
| 104 | 1.34S/F Batten holder:-Supplying and fixing batten/angle holder including connection etc, as required. |
| 105 | 1.36S/F Dingdong Call bell :-Supplying and fixing dingdong call bell suitable for DC/AC single phase,230 volt, complete as required. |
| 106 | 1.48ITC exhaust fan up to 450 mm, sweep:-Installation of exhaust fan up to 450 mm. sweep in the exiting opening, including making the hole to suit the size of above fan, making good the damage, connection testing commissioning etc as required. |
| 107 | 2.8S/F S.P. MCB DB:-Supplying and fixing following way single pole nutral,sheet,MCB distribution board,240 volt,in recess,complete with tinned copper busbar,earth bar, din bar, detachable gland plate, interconnections, phosphatized and power painted including earthing etc. as required.(But without MCB/RCCB/ISOLATOR) |
| 108 | 2.8.912 Way,Double door |
| 109 | 2.11S/F 'B' series. S.P.MCB:-Supplying and fixing 6 amps to 32 amps rating,240 volts, 'B' series miniature circuit breaker suitable for lighting and others loads of following poles in the exiting MCB DB complite with connections. Testing and commisioning etc as required. |
| 110 | 2.11.16/32 amps,single pole, \\"B\\" SERIES |
| 111 | 2.12S/F 'C' series. S.P.MCB:-Supplying and fixing 6 amps to 32 amps rating,240 volts, 'C' series miniature circuit breaker suitable for lighting and others loads of following poles in the exiting MCB DB complite with connections. Testing and commisioning etc as required. |
| 112 | 2.12.16/32 amps,single pole, \\"C\\" SERIES |
| 113 | 2.12.750/63 amps, DP |
| 114 | 2.19P/F M.V. danger notice plate:-Providing and fixing M.V danger notice plate of 200mm x150mm made of mild steel, at least 2mm thick, and vitreous enamelled white on both sides, and with inscription in single red coiour on front side as required. |
| 115 | 3.2G.I Earth pipe electrode with salt charcoal :-Earthing with G.I. earth pipe 4.5 mtr long,40mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required. with salt charcoal or coke. |
| 116 | 3.6Copper Earth plate electrode:-Earthing with copper earth plate 600mmX600mmX3mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required.( with salt charcoal or coke) |
| 117 | 3.7S/L 8 SWG copper wire ground :-Supplying and laying 8 SWG copper wire 0.50 metre bellow ground level for conductor earth electrode, including soldring etc. as required. |
| 118 | 4.2P/F G.I. lightning conductor finial:-Providing and fixing of lighting cnductor finial, made of 25 mm dia 300mm long, copper tube having single prong at top, with 85mm dia 3mm thick G.I. base plate including holes etc. complete as required. |
| 119 | 4.4Reverting, sweating and soldering of copper/G.I. tape(with another coppr/G.I. tape, base of the finial or any other metallic object) as required. |
| 120 | 4.7P/F G.I. lightning conductor tape in horizontal run:-Providing and fixing GI tape 20mm x 3mmthick on parapet or surface of wall for lightning conductor complete as required(For horizontal run) |
| 121 | 4.8P/F G.I lightning conductor tape in vertical run:-Providing and fixing GI tape 20mm x 3mmthick on parapet or surface of wall for lightning conductor complete as required(for vertical run) |
| 122 | 4.12P/F Testing joint for G.I. lighting conductor:-Providing and fixing testing joint, made of 20mm x 3mm thick G.I. strip, 125mm long, with 4 nos.of G.I. bolts, nuts, chek nuts and spring washers etc complete as required. |
| 123 | 5.2Laying of one number PVC insuleted and PVC sheathed/ XLPE power cable of 11 KV grade of size exceeding 35 sq.mm.but not exceeding 95sq.mm. direct in ground including excavetion, sand coushioning, protective covering and refilling the trench etc as required. |
| 124 | M-33095 sq.mm. 3.5 core |
| 125 | 12.37 DSR Supplying and fixing of light class G.I. pipe of 50 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required |
| 126 | 9.1 DSRSupplying and making end termination with brass commpression gland and aluminium lugs for following size of PVC insuleted and PVC sheathed /XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 127 | 9.1.24 DSR 3½ X 95 sq. mm (45mm) |
| 128 | M - 774Providing of 9'' (230 mm) Metal exhaust fan of make bajaj/havells/usha/crompton |
| 129 | M - 777Providing of 16'' (400 mm) Wall fan of make bajaj/havells/usha/crompton |
| 130 | M - 869Providing of Bulkhead fitting with 9/10 watt LED/ CFL of make bajaj/havells/crompton |
| 131 | M 856Supplying and fixing of LED bulb 15/16 W of make bajaj/havells/crompton |
| 132 | M - 1502Providing and fixing of 50 watt suspended type industrial COB highbay light with aluminium dia cast heat sink of make bajaj/havells/Philips/crompton |
| 133 | 9.1SITC of following rating LED street lighting luminarie with pressure dia cast housingh and toughned glass cover ,IP 66 Protection , LUMINOUSEFFICARY >_110 LM/W with lens in existing pole /pipe for supply voltage 100-270V AC ,50 Hz, luminarie shall be confirm to IS 10322 part -5 /section -3 and shall be complete with all neccssary accessosries as required. |
| 134 | 9.1.790 /100 W LED Street light of make bajaj/havells/crompton/C&S |
| 135 | 9.2S.I.T.C of following rating LED FLOOD lighting with pressure dia cast housing and toughened glass cover (IP 66 protection)in existing pole/pipe /platform/periferial wall for supply voltage 100-270v AC,50Hz Luminire shall be confirmto IS-10322 part-5/ section-3 and shall be complete with all neccssary accessories as required.of make bajaj/havells/crompton/C&S |
| 136 | 9.2.490/100 W LED FLOOD LIGHT of make bajaj/havells/crompton/C&S /Jaquar |
| 137 | 9.4S.I.T.C of following size ceiling fan 3 blades confirming to IS:374:2019 including wiring the down rods of standared length (upto 30cm) with 1.5 sq.mm FR PVC insuleted ,copper wire suitable for 230 V 50 Hz, single phase supply etc. complete as required. |
| 138 | 9.4.1 1200 mm (48\\") Ceiling Fan of make bajaj/havells/usha/crompton/polar |
| 139 | 9.5SITC of following rating surface mounted LED tube light fitting suitable for 230 V 50 Hz, single phase supply etc .complete as required |
| 140 | 9.5.220/22 W LED Batten of make bajaj/havells/crompton/C&S |
| 141 | EXTERNAL LIGHTING |
| 142 | M-742Supply of 7 Mtr height Octagonal Hot Dip Galvenized pole (BOP - 7030) with top dia 70 mm, bottom dia 130 mm & made of 3 mm thick sheet base plate dimensions 200x200x12mm (L X B X T) including suitable sizes of foundetion bolt all complete as requried. (Without Arm) |
| 143 | M-7541 Mtr Single Arm suitable for 70 mm TOP |
| 144 | M-875Instalation Testing & Commisioning of 7 Mtr Octagonal Pole & light fitting with the help of tools & plants, wiring of luminaires with all materials and construction of shallow foundetion with M 25 grade concreat considering safe soil bearing capacity of 10T/Mtrs sq |
| 145 | Code no.Supply of PVC XLPE insuletd PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts,(conforms to IS:7098, part-1)g |
| 146 | M-74016 sq.mm. 4 core |
| 147 | 9.1 DSRSupplying and making end termination with brass commpression gland and aluminium lugs for following size of PVC insuleted and PVC sheathed /XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 148 | 9.1.33 DSR 4 X 16 sq. mm (28mm) |
| 149 | 3.2G.I Earth pipe electrode with salt charcoal :-Earthing with G.I. earth pipe 4.5 mtr long,40mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required. with salt charcoal or coke. |
| 150 | 9.1SITC of following rating LED street lighting luminarie with pressure dia cast housingh and toughned glass cover ,IP 66 Protection , LUMINOUSEFFICARY >_110 LM/W with lens in existing pole /pipe for supply voltage 100-270V AC ,50 Hz, luminarie shall be confirm to IS 10322 part -5 /section -3 and shall be complete with all neccssary accessosries as required. |
| 151 | 9.1.790 /100 W LED Street light of make bajaj/havells/crompton/C&S /Jaquar |
| 152 | Design manufacture, supply installation, testing and commissioning of 16 SWG sheet steel fabricated cubical type floor mounting front operated construction, enclosure class - IP 52, finishing with 7 tank process and powder coating of the entire panel including covers in required shade complete with top / bottom ( as called for ) removable gland plates, cable alleys, double compression doors to achieve dust and vermin proof complete with all inter connections small wiring by copper wires, ckt labels etc. The Copper Bus Bar shall be of suitable size for 500 volts, 3 phase 50 Hz TPN, electrolytic copper as per Is 8623 insulated by heat shrinkable sleaves with surround joints. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmeter, selector switches, CT's, PT's, etc. The panels shall be got fabricated only from panel builders having 7 tank process finishing system and CPRI approved certificate for similar LT Panel. |
| 153 | LT PANEL (NORMAL SUPPLY) :35 KA) -INCOMING (1- sets ) each with following: |
| 154 | (A) INCOMING |
| 155 | M - 320150/160A 35 KA MCCB FP Adjustable thermal seting |
| 156 | M - 58163 changover FP (ON-LOAD) Open excution type |
| 157 | M-617100A 415 V, Heavy Duty TPN BUSBAR (COPPER) |
| 158 | M-618200A 415 V, Heavy Duty TPN BUSBAR (COPPER) |
| 159 | (B) OUTGOING |
| 160 | 2.4.125/100 amps, 10 KA fixed thermal seting MCCB |
| 161 | 2.4.3125 amps, 16 KA fixed thermal seting MCCB |
| 162 | 2.12.332 amps.SPN MCB |
| 163 | 2.12.640 amps ,DP |
| 164 | 2.12.763 amps. DP MCB |
| 165 | 2.12.1050/63 amps, TPN |
| 166 | (C )OTHER ACCESSOSRIES |
| 167 | M- 873 A DIGITAL VOLT METER 500V(3phase class 0.5) |
| 168 | M- 873 BDIGITAL A METER 500V(3phase class 0.5) |
| 169 | M-190153 Amp Power contactor of type AC-1 duty 1., 4 pole IS/IEC/ 60947+7 |
| 170 | M-1465ON/OFF push button |
| 171 | M-1466Electronic timer-on delay/off delay for 0 to 30sec. |
| 172 | M- 445COPPER WIRE 1.5MM |
| 173 | M- 448COPPER WIRE 6MM |
| 174 | M- 449COPPER WIRE 10MM |
| 175 | M- 450COPPER WIRE 16MM |
| 176 | M- 1455LED INDICATOR LAMP R/Y/B/G |
| 177 | M- 1452C.T COIL OF CT ratio 500/5 IS2705 part -3 |
| 178 | Anaylised & ApprovedS/F wall floor mounted cubical panel board , fabricated with 16 gauge iron sheet suitable for panel mounted switch disconnector ,incliding busbar chamber,insulator and painting etc.as required .(but without busbar copper strip /Switchgears/MCB's/Wiring and other accessosries) The rate of this item is sum of A +B + C @50% That is |
| 179 | Add 18% GST |
| 180 | Add 1% Lebour Cess Please Enable Macros to View BoQ information |
