|
| 1 | Providing & laying Ist .class brick work using common burnt clay building bricks in square and rectangular pillars in super-structure above plinth level up to all floor level with cement mortar 1:4(1cement:4sand) including entire carriage of material within all leads and lifts. |
| 2 | Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm.so as to give a fair finish including centering, shuttering strutting and propping etc. with wooden battens and bellies, height of propping and centering below supporting floor to ceiling not exceeding 4 mtr. and removal of the same for in-situ-reinforced concrete & plain concrete work including entire carriage of material within all leads and lifts. Beams, cantilever, girders and lintels Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 Mtr. in depth inall heights from floor. |
| 3 | Providing and laying cement concrete work 1:2:4 (1 Cement:2 Sand:4 graded crushed stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in Suspended Floor roofs, landing and shelves and their support balconies,beams, girders,bressumers and contilever upto floor two level including entire carriage of material within all leads & lifts. |
| 4 | Providing mild steel/tor steel reinforcement for RCC work including bending, binding with binding wire and placing in postion complete up to all floor level./ tor steel including entire carriage of material within all leads & lifts. (Amba/ Kamdhenu/Jai Bharat Make) |
| 5 | Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge including entire carriage of material within all leads,lifts upto all floor level and heights.(Tata Duroshine make) |
| 6 | Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges including entire carriage of material within all leads,lifts upto all floor level and heights.(Tata Duroshine make) |
| 7 | Providing and fixing MS BP sheet 1.66 mm thick in eaves board /fascia /soffits/ceiling including cutting, fixing and welding to steel roof members & applying a coat of red lead primer complete as per the instruction of Engineer –in- charge (Base members of steel work shall be measured & paid separately) including entire carriage of material within all leads & lifts. |
| 8 | Providing and fixing Steel work welded in built up sections, trusses and framed work,including cutting, hoisting fixing in position and applying a priming coat of red lead paint including entire carriage of material within all leads & lifts (Amba/Kamdhenu/ Jai Bharat make) |
| 9 | In trusses and trussed purlins in buildings.. |
| 10 | In gratings framed guard bars,ladders,railling,brackets and similar works. |
| 11 | Providing &laying 15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in Cement Mortar 1:6 (1Cement:6 Sand) including entire cariage of material within all leads & lifts. |
| 12 | Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including entire carriage of material within all leads & lifts. |
| 13 | Painting two coats (excluding priming coat) on new steel and other metal surfaces with ready mixed paint brushing to give an even shade including cleaning the surface of all dirt,dust and other foregin matters With white enamel paint other than white including entire carriage of material within all leads and lifts. (Nerolac/Asian make 1st quality) Please Enable Macros to View BoQ information |
